Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Light Fitting Instructions

    Uploaded by

    Murat
    The document provides instructions for installing wall and ceiling lights. It emphasizes that the lights must be installed according to electrical regulations and earthed if any doubt exists about installation. Ceiling lights should be installed beneath a joist or batten capable of supporting the light's weight. Wall lights are only suitable for flush wiring and require connections within a flush mounted box. Drill holes for the lights without damaging wires and secure the lights carefully without trapping wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Light Fitting Instructions

    Uploaded by

    Murat
    19 views1 page
    The document provides instructions for installing wall and ceiling lights. It emphasizes that the lights must be installed according to electrical regulations and earthed if any doubt exists about installation. Ceiling lights should be installed beneath a joist or batten capable of supporting the light's weight. Wall lights are only suitable for flush wiring and require connections within a flush mounted box. Drill holes for the lights without damaging wires and secure the lights carefully without trapping wires.

    Original Title

    light-fitting-instructions

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing wall and ceiling lights. It emphasizes that the lights must be installed according to electrical regulations and earthed if any doubt exists about installation. Ceiling lights should be installed beneath a joist or batten capable of supporting the light's weight. Wall lights are only suitable for flush wiring and require connections within a flush mounted box. Drill holes for the lights without damaging wires and secure the lights carefully without trapping wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views1 page

    Light Fitting Instructions

    Uploaded by

    Murat
    The document provides instructions for installing wall and ceiling lights. It emphasizes that the lights must be installed according to electrical regulations and earthed if any doubt exists about installation. Ceiling lights should be installed beneath a joist or batten capable of supporting the light's weight. Wall lights are only suitable for flush wiring and require connections within a flush mounted box. Drill holes for the lights without damaging wires and secure the lights carefully without trapping wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    FITTING INSTRUCTIONS FOR WALL AND CEILING LIGHTS

    VERY IMPORTANT - This luminaire must be installed in accordance with British Standard 7671 : the
    requirements for electrical installations. (IEE wiring regulations).

    THIS LUMINAIRE MUST BE EARTHED


    IF YOU ARE IN ANY DOUBT ABOUT THIS INSTALLATION PLEASE CONSULT A COMPETENT ELECTRICIAN

    The electricity supply must always be isolated at it’s source (fuse box) before attempting installation or maintenance.
    The luminaire must be fitted with bulbs which do not exceed the maximum stated wattage.

    CEI LI NG LI GHTS
    IMPORTANT - YOUR LIGHT FITTING IS SUPPLIED WITH GENERAL
    PURPOSE FIXINGS SUITABLE FOR FITTING TO A SOUND SURFACE. YOU
    MAY FIND THAT THERE ARE SOME SITUATIONS THAT REQUIRE MORE
    SPECIALIST FIXINGS. IF YOU ARE IN ANY DOUBT WE ADVISE YOU TO
    SEEK PROFESSIONAL ADVICE. PLEASE ENSURE THAT THE POSITION
    CHOSEN FOR THE CEILING LIGHT IS BENEATH A JOIST OR BATTEN
    SUITABLE TO SUPPORT THE WEIGHT OF THE LIGHT FITTING.

     Mark the drilling position on the ceiling to correspond with the


    fixing holes on your light fitting and drill holes taking care not to
    damage the electrical supply cables.
     Carefully secure the light to the ceiling using the screws
    provided and taking care not to trap any wires.
     Where appropriate adjust the height of the chain as required.
     Make electrical connections as shown in the diagram opposite.
     If your luminaire is not at the end of a wiring spur then there
    will be an extra pair of wires together (loop wires) in the supply
    wiring which could be coloured black or red. These should be
    connected together using a fourth approved terminal block (not
    supplied). If in doubt consult a qualified electrician.

    WALL LI GHTS
     These wall lights are only suitable for use with flush wiring.
     The design of the wall light requires that the connections are
    housed within a suitable flush mounted box.
     Mark the drilling position on your wall to correspond with the
    fixing holes on your light fitting.
     Drill holes taking care not to damage the electrical supply cables.
     Make electrical connections as shown in the diagram opposite.
     Carefully secure the wall light to the wall using the screws
    provided and taking care not to trap any wires.

    Any problems with fitting? – just give us a call on


    01226 766618

    www.nigeltyas.co.uk sales@nigeltyas.co.uk 01226 766618

    You might also like