Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 64 views

    Lee Bench Plate Manual

    Uploaded by

    bmichelotto2
    The Lee Bench Plate allows for sturdy mounting of reloading presses and accessories to benches. It distributes loading pressure over a large area for secure installation. Dimensioned drawings of Lee press mounts are available online. The instructions describe how to mount the bench plate to a bench with bolts or lag screws through its mounting holes. Presses can then be mounted to the plate by bolting them to the plate's base block holes using elevator bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lee Bench Plate Manual

    Uploaded by

    bmichelotto2
    64 views1 page
    The Lee Bench Plate allows for sturdy mounting of reloading presses and accessories to benches. It distributes loading pressure over a large area for secure installation. Dimensioned drawings of Lee press mounts are available online. The instructions describe how to mount the bench plate to a bench with bolts or lag screws through its mounting holes. Presses can then be mounted to the plate by bolting them to the plate's base block holes using elevator bolts.

    Original Description:

    Lee Bench Plate Manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Lee Bench Plate allows for sturdy mounting of reloading presses and accessories to benches. It distributes loading pressure over a large area for secure installation. Dimensioned drawings of Lee press mounts are available online. The instructions describe how to mount the bench plate to a bench with bolts or lag screws through its mounting holes. Presses can then be mounted to the plate by bolting them to the plate's base block holes using elevator bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    64 views1 page

    Lee Bench Plate Manual

    Uploaded by

    bmichelotto2
    The Lee Bench Plate allows for sturdy mounting of reloading presses and accessories to benches. It distributes loading pressure over a large area for secure installation. Dimensioned drawings of Lee press mounts are available online. The instructions describe how to mount the bench plate to a bench with bolts or lag screws through its mounting holes. Presses can then be mounted to the plate by bolting them to the plate's base block holes using elevator bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    LEE BENCH PLATE INSTRUCTIONS

    Catalog # 90251

    The Lee Bench Plate allows sturdy mounting and quick changing of your MOUNTING PRESS OR ACCESSORY ON WOOD
    reloading press or mounted accessories. The heavy steel mounting plate
    Using 3/4” (.690” to .750”) plywood and the provided drill template below,
    distributes the loading pressure over a large area, making installation a
    drill holes in wood block. Make sure to drill alignment lock holes as well.
    success on any bench.
    It is important to use the alignment/lockpin hole when using wood block.
    Dimensioned full size drawings of all Lee press mountings
    are available online at www.leeprecision.com. Dimensioned full size drawings of all Lee press mountings are available
    Click on the i n st ru ct i o ns button. online at www.leeprecision.com.
    Click on the instructions button.
    3 FQ1828 Short Elevator Bench Plate Bolt
    4 FQ1869 ¼-20 x 5/16 Philips pan head MASTER DRILL TEMPLATE LEE RELOADING PRESS DRILL TEMPLATES
    3 FQ1871 ¼” SAE Flat Washer
    3 FT1994 1/4 –20 Nut
    1 LS1898 Bench Plate Instructions
    1 Mount base plate flush with front
    edge of your bench or sturdy table.
    Orientate the bench base plate with
    the hexagonal hole to the left. On
    workbenches where front edge is flush
    with cabinet or drawer below, use the
    2nd set of holes, and mount the base
    plate 1/2” minimum over the front edge
    of the bench.
    LOCK PIN & BLOCK ORIENTATION
    Install the Z-brackets with the provided
    1/4”–20 pan head screws. Start the
    screws in a few threads, but do not fully Lock pin
    Lock Pin Hole
    tighten at this point.
    Lock Pin Hole

    2 Drill four 1/4” holes using the bench


    plate as a template. If tabletop is 3/4” or
    thinner, use at least 1/4” through bolts
    with nuts and washers. If table top is 3/4”
    or thicker, 5/16” lag bolts work nicely.
    (There are six mounting holes; select four
    holes that don’t interfere with brackets or
    braces on your bench)
    If you are mounting a press or accessory
    on a wood block, drill 5/16” holes through
    the hexagonal and circular hole. These
    two holes allow the user to drop a 1/4”
    bolt or screwdriver shank to lock the
    wood block to the steel plate.

    MOUNTING PRESS TO STEEL BASE BLOCK


    Hold press up to steel base block, bolt up using
    holes in steel base block that line up with the
    mounting lugs of your Lee press. Use short Make sure the wood block is right side up, so that the alignment holes in
    elevator bolts to mount your Lee press. Tighten the wood block and the steel plate line up. Select the appropriate length
    using 7/16” wrench. elevator bolts and secure press to base block. Tighten nut until the flat head
    of the bolt is flush with wood base.

    Have other Lee Presses to mount?


    Purchase part #90267 for quick and easy press mounting. No drilling required.

    Slide your press into the Bench Plate. Insert a 1/4” bolt, screwdriver shank
    into the lock/alignment hole. This ensures the wood block is properly
    aligned and will not slide out during your reloading session. Tighten the four
    Z-bracket screws. To remove press, loosen Z-bracket screws a turn, remove
    lock/alignment pin and slide from the base plate.

    LEE PRECISION, INC.


    LS1898

    4275 Hwy. U · Hartford WI 53027


    ©2022 LEE PRECISION, INC. PRINTED IN USA www.leeprecision.com

    You might also like