GE111-Lecture 8 Updated

Material Safety Data Sheet (MSDS)
https://www.slideshare.net/VikashMishra53/material-safety-data-sheetor-safety-data- 3
sheet
Identification
Following criteria are used to identify HW:
❑ The list provided by government agencies as
HW.
❑ Characteristics such as ignitability, corrosive,
reactivity and toxicity.
Environmental Protection Agency, USA,

guidelines
RCRA – Resource conservation and recovery act
Characteristics of Hazardous wastes
Environmental health & Safety 4

Environmental organizations in India
Classification
HW are classified as F, K, P and U lists.
❖ F-List: The F-list contains hazardous wastes from non-specific sources, that is various industrial processes that
may have generated the waste. The list consists of solvents commonly used in degreasing, metal treatment
baths and sludges, wastewaters from metal plating operations and dioxin containing chemicals or their
precursors. Examples: Benzene (F005), Carbon tetrachloride (F001), Cresylic acid (F004) etc.
❖ K-list: The K-list contains hazardous wastes generated by specific industrial processes. Examples of
industries, which generate K-listed wastes include wood preservation, pigment production, chemical
production, petroleum refining, iron and steel production, explosive manufacturing and pesticide production.
❖ P and U lists: The P and U lists contain discarded commercial chemical products, off-specification chemicals,
container residues and residues from the spillage of materials. These two lists include commercial pure
grades of the chemical, any technical grades of the chemical that are produced or marketed, and all
formulations in which the chemical is the sole active ingredient. An example of a P or U listed hazardous
waste is a pesticide, which is not used during its shelf- life and requires to be disposed in bulk.
5
Classification based on characteristics
➢ Ignitability: A waste is an ignitable hazardous waste, if it has a flash point of less than 95°F; readily
catches fire and burns so vigorously as to create a hazard; or is an ignitable compressed gas or an
oxidizer. Ex: Naphtha, lacquer thinner, epoxy resins, adhesives, oil based paints etc.
➢ Corrosivity: A liquid waste which has a pH of less than or equal to 2 or greater than or equal to 12.5 is
considered to be a corrosive hazardous waste. Sodium hydroxide, a caustic solution with a high pH, is
often used by many industries to clean or degrease metal parts. Hydrochloric acid, a solution with a
low pH, is used by many industries to clean metal parts prior to painting. When these caustic or acid
solutions are disposed of, the waste is a corrosive hazardous waste.
➢ Reactivity: A material is considered a reactive hazardous waste, if it is unstable, reacts violently with
water, generates toxic gases when exposed to water or corrosive materials, or if it is capable of
detonation or explosion when exposed to heat or a flame. Examples of reactive wastes would be
waste gunpowder, sodium metal or wastes containing cyanides or sulphides.
➢ Toxicity: To determine if a waste is a toxic hazardous waste, a representative sample of the material
must be subjected to a test conducted in a certified laboratory. The toxic characteristic identifies
wastes that are likely to leach dangerous concentrations of toxic chemicals into ground water.
6
Classification: Hazardous wastes materials
HWs are generally classified into five categories.
Waste category
Radioactive substances Biomedical research facilities, colleges and university laboratories,
offices, hospitals, nuclear power plants, etc.
Toxic chemicals Agricultural chemical companies, battery shops, car washes, chemical
shops, college and university laboratories, construction companies,
electric utilities, hospitals and clinics, industrial cooling towers, newspaper
and photographic solutions, nuclear power plants, pest control agencies,
photographic processing facilities, plating shops, service stations, etc.
Biological wastes Biomedical research facilities, drug companies, hospitals, medical clinics,
etc.
Flammable wastes Dry cleaners, petroleum reclamation plants, petroleum refining and
processing
facilities, service stations, tanker truck cleaning stations, etc.
Explosives Ammunition production facilities, etc.
K. Syamala Devi et al., IJCRT, 6, 2018, pg. 1547-1555. 7

GE111-Lecture 8 Updated

Uploaded by

Copyright:

Available Formats

GE111-Lecture 8 Updated

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GE111-Lecture 8 Updated

Uploaded by

Copyright:

Available Formats

Material Safety Data Sheet (MSDS)

Environmental Protection Agency, USA,

Characteristics of Hazardous wastes

Environmental health & Safety 4

HWs are generally classified into five categories.

K. Syamala Devi et al., IJCRT, 6, 2018, pg. 1547-1555. 7

You might also like