Specifications Needed For Calibrators From Different Labs
Specifications Needed For Calibrators From Different Labs
Specifications Needed For Calibrators From Different Labs
2. Air Flow Rate$ 0.6 m3/min to 1.5 m3/min 0.78 % Using PD Meter by
Comparison Method,
USEPA IO2.1
3. Air Flow Rate# 0.6 m3/min to 1.5 m3/min 1.10 % Using Top Loading
Calibrator by
Comparison Method,
USPEA IO2.1
Although some parameters are yet to be covered under NABL accreditation, NPKLAB fulfils
all requirements of traceability and technical competency for its unique facility for Flow
calibration:
Calibration by gravimetric
method using constant flow
Liquid flowmeter / flow pump and semi micro 0.1 ml/min to 5 ml/min 0.0058 ml/min to
128 FLUID FLOW- measuring sensors 0.0038 ml/min
weighing balance (0.1mg) in
FLOW
auto mode.
MEASURING
DEVICES
4.) SBEM PVT LTD, SBEM FLOW LABORATORY
Measurand or Reference Measurement range and
Material/Type of additional parameters * Calibration and
Calibration or
S.No Discipline / Group instrument or material to Measurement Method where applicable Measurement Capability
be calibrated or measured (Range and Frequency) (CMC) (±)
or procedure
/ Quantity Measured
/Instrument
LOCATION 1-UNIT NO 9, 691/A/2, BIBWEWADI INDUSTRIAL ESTATE, PUNE-SATARA ROAD, PUNE, MAHARASHTRA, INDIA
Permanent Facility
Using Electromagnetic
FLUID FLOW- Flowmeter by Comparison
FLOW Liquid Volume Flow Rate Method (Comparative 500 m3/hr to 3500 m3/hr
1 MEASURING (Water) Method) 0.2%
DEVICES
Using Electromagnetic
FLUID FLOW- Flowmeter by Comparison
FLOW Liquid Volume Method (Comparative
2 MEASURING Measured Quantity Method) 7 m3 to 35 m3 0.2%
DEVICES (Water)
Fluid flow-Quantity By
FLUID FLOW- Mass (EMF, Rota meter, Using 400 kg Weighing
4 FLOW MEASURING USFM, Turbine, Oval Gear, System by Gravimetric 100 kg to 400 kg 0.08% rdg
DEVICES Vortex, Orifice Plate, Method as per ISO 4185
Venturi, Critical flow
venturi, Flow Nozzles, Pitot
tube, Wedge type, Annubar,
Coriolis FM,Thermal, Posi.
Liquid (Water Medium)
FLUID FLOW- Mass Flow Rate (EMF, Rota Using 400 kg Weighing
FLOW MEASURING meter, USFM, Turbine, Oval System by Gravimetric
5 DEVICES Gear, Vortex, Orifice Plate, Method as per ISO 4185 0.5 t/h to 25 t/h 0.11% rdg
Venturi, Critical flow
venturi, Flow Nozzles,
Wedge type, Annubar,
Coriolis FM, Thermal, Posi.
disp
LOCATION 2 - #47, GANAPATHI NAGAR, RAJGOPAL NAGAR MAIN ROAD, PEENYA INDUSTRIAL
AREA, BENGALURU, KARNATAKA, INDIA
Permanent Facility
Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated or Measurement
Method or procedure where applicable (Range
measured / Quantity Capability CMC)
and Frequency)
Measured /Instrument (±)
LOCATION 2 - #47, GANAPATHI NAGAR, RAJGOPAL NAGAR MAIN ROAD, PEENYA INDUSTRIAL
AREA, BENGALURU, KARNATAKA, INDIA
Site Facility