Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    CB 50

    Uploaded by

    BakeelAl-mughalis
    CORROBAN 50 is a corrosion inhibitor intended to protect steel, copper, and other non-ferrous metals in closed chilled water and low pressure heating systems. It contains molybdate to inhibit corrosion when dosed at 0.5-1% for systems without aluminum and 1-1.5% for systems with aluminum. Proper pH control between 7-8 is important when aluminum is present.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CB 50

    Uploaded by

    BakeelAl-mughalis
    19 views2 pages
    CORROBAN 50 is a corrosion inhibitor intended to protect steel, copper, and other non-ferrous metals in closed chilled water and low pressure heating systems. It contains molybdate to inhibit corrosion when dosed at 0.5-1% for systems without aluminum and 1-1.5% for systems with aluminum. Proper pH control between 7-8 is important when aluminum is present.

    Original Title

    CB-50

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CORROBAN 50 is a corrosion inhibitor intended to protect steel, copper, and other non-ferrous metals in closed chilled water and low pressure heating systems. It contains molybdate to inhibit corrosion when dosed at 0.5-1% for systems without aluminum and 1-1.5% for systems with aluminum. Proper pH control between 7-8 is important when aluminum is present.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views2 pages

    CB 50

    Uploaded by

    BakeelAl-mughalis
    CORROBAN 50 is a corrosion inhibitor intended to protect steel, copper, and other non-ferrous metals in closed chilled water and low pressure heating systems. It contains molybdate to inhibit corrosion when dosed at 0.5-1% for systems without aluminum and 1-1.5% for systems with aluminum. Proper pH control between 7-8 is important when aluminum is present.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CORROBAN 50

    PRODUCT DATA Corrosion Inhibitor for Closed Water Circulating Systems Containing
    Aluminium

    Description and Use

    CORROBAN 50 is a corrosion inhibitor based on a novel blend of organic and inorganic


    corrosion inhibitors, including molybdate, intended to protect steel, copper and other non-
    ferrous metals. As such CORROBAN 50 is an ideal treatment for closed chilled water and
    low pressure heating systems.

    Important

    Whilst CORROBAN 50 is designed to protect systems which incorporate aluminium it should NOT
    be used in systems with Stelrad Super Plus Modular boilers where an alternative product COPAL
    should be used, and in all applications where aluminium is present it is important to control the pH
    in the range 7-8.

    Dosing

    For systems containing no aluminium CORROBAN 50 should be dosed at 0.5 to 1% (5,000


    - 10,000 ml/m3 ) in order to give a reserve of 50ppm of sodium molybdate. For systems
    containing aluminium the dosage of 1-1.5% should be added in order to maintain a minimum
    reserve of 100ppm of sodium molybdate. In certain circumstances it may be necessary to
    adjust the pH separately by the addition of pH CONDITIONER - your Consultant will advise.
    In systems requiring significant passivation higher initial dosages may be required to yield the
    required inhibitor residual.

    Typical Properties

    Appearance - Golden brown coloured solution


    Non-volatile

    Safety

    See overleaf.

    Packaging

    CORROBAN 50 is supplied in 25kg and 200 litre polythene drums.

    Feedwater Limited
    Tarran Way, Moreton, Wirral, CH46 4TU, UK
    Tel: +44 (0)151 606 0808 Email: enquiries@feedwater.co.uk
    Fax: +44 (0)151 678 5459 Web: www.feedwater.co.uk
    Safety and Handling Precautions IRRITANT

    Product Name CORROBAN 50

    Normal Use Cooling water, closed circuit systems - corrosion inhibitor and antifoulant.

    Health Hazards

    Irritating to skin and eyes. May cause skin sensitisation on prolonged contact.

    First Aid

    Skin Exposure: Drench affected area with water, remove contaminated clothing, wash with soap and
    water. If irritation develops, seek medical advice.

    Eye Exposure: Irrigate with copious amounts of clean water or saline eye wash solution for at least
    10 minutes. Obtain medical attention.

    Ingestion: Wash out mouth with water and give plenty of water to drink. Do not induce vomiting.
    Treatment may be needed for shock or pain. Obtain medical attention urgently.

    Storage
    Keep container tightly closed and in a cool place. Protect from freezing

    Handling
    Avoid contact with skin or eyes.
    Wear suitable protective clothing, gloves and eye protection.

    Spillage
    Flush spillage with plenty of water and wash to waste.

    Disposal
    Wash out empty container thoroughly with water before disposal.

    FOR PRODUCT AND SAFETY DATA SHEETS


    EMAIL: data@feedwater.co.uk

    You might also like