A RTEMIS

ReferenceManual

Version v8p4
December 1, 2022
 Contents

1 Detail list of keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 ALPHA 7
1.2 AMPLITUDE AND PHASE FILE 7
1.3 AMPLITUDE AND PHASE FILE FORMAT 7
1.4 AUTOMATIC CALCULATION OF PHASE 8
1.5 AUTOMATIC TETAP CALCULATION 8
1.6 BEGINNING PERIOD FOR PERIOD SCANNING 8
1.7 BINARY DATA FILE 1 8
1.8 BINARY DATA FILE 1 FORMAT 8
1.9 BINARY DATA FILE 2 9
1.10 BINARY DATA FILE 2 FORMAT 9
1.11 BINARY RESULTS FILE 9
1.12 BOTTOM FRICTION LAW 9
1.13 BOTTOM TOPOGRAPHY FILE 9
1.14 BOTTOM TOPOGRAPHY SMOOTHING 10
1.15 BOUNDARY CONDITIONS FILE 10
1.16 BREAKING 10
1.17 BREAKING LAW 10
1.18 CHECKING THE MESH 10
1.19 CONCATENATE PARTEL OUTPUT 11
1.20 COORDINATES OF THE REFERENCE F SPECTRUM 11
1.21 CURRENT 11
1.22 DEBUGGER 11
1.23 DIAMETER50 11
1.24 DIAMETER90 12
1.25 DICTIONARY 12
1.26 DIRECTION OF WAVE PROPAGATION 12
1.27 DISSIPATION RELAXATION 13
1.28 ENDING PERIOD FOR PERIOD SCANNING 13
1.29 FIRST TIME IN THE FREE SURFACE FILE 13
1.30 FLUID KINEMATIC VISCOSITY 13
1.31 FLUID SPECIFIC MASS 14
1.32 FORMATTED DATA FILE 1 14
1.33 FORMATTED DATA FILE 2 14
1.34 FORMATTED RESULTS FILE 14
1.35 FORTRAN FILE 14
1.36 FREE SURFACE ANIMATION 14
1.37 FREE SURFACE FILE 15
1.38 FREE SURFACE FILE FORMAT 15
1.39 FRICTION 15
1.40 FRICTION COEFFICIENT 15
1.41 FRICTION FACTOR 16
1.42 FRICTION FACTOR IMPOSED 16
1.43 GAMMA 16
1.44 GAMMAS 16
1.45 GDALLY 16
1.46 GEOMETRY FILE 17
1.47 GEOMETRY FILE FORMAT 17
1.48 GRAPHIC PRINTOUT PERIOD 17
1.49 GRAVITY ACCELERATION 17
1.50 HYDRAULIC REGIME IMPOSED 17
1.51 HYDRAULIC REGIME TYPE 18
1.52 INFORMATIONS ABOUT SOLVER 18
1.53 INITIAL CONDITIONS 18
1.54 INITIAL DEPTH 19
1.55 INITIAL WATER LEVEL 19
1.56 INSTANT FOR READING TOMAWAC SPECTRUM 19
1.57 KDALLY 19
1.58 LISTING PRINTOUT 19
1.59 LISTING PRINTOUT PERIOD 20
1.60 MATRIX STORAGE 20
1.61 MATRIX-VECTOR PRODUCT 20
1.62 MAXIMUM ANGLE OF PROPAGATION 20
1.63 MAXIMUM NUMBER OF ITERATIONS FOR SOLVER 21
1.64 MAXIMUM OF SUB-ITERATIONS 21
1.65 MAXIMUM OF SUB-ITERATIONS FOR TETAP 21
1.66 MAXIMUM SPECTRAL PERIOD 21
1.67 MINIMUM ANGLE OF PROPAGATION 21
1.68 MINIMUM SPECTRAL PERIOD 22
1.69 MONODIRECTIONAL RANDOM WAVE 22
1.70 MULTIDIRECTIONAL RANDOM WAVE 22
1.71 NESTING WITHIN TOMAWAC OUTER MODEL 22
1.72 NUMBER OF DIRECTIONS 22
1.73 NUMBER OF PERIODS 23
1.74 NUMBER OF PRIVATE VARIABLES 23
1.75 NUMBER OF TIME STEPS 23
1.76 ORIGIN COORDINATES 23
1.77 ORIGINAL DATE OF TIME 23
1.78 ORIGINAL HOUR OF TIME 24
1.79 PARALLEL PROCESSORS 24
1.80 PARTITIONING TOOL 24
1.81 PEAK PERIOD 24
1.82 PERIOD SCANNING 25
1.83 PHASE REFERENCE COORDINATES 25
1.84 PRECONDITIONING 25
1.85 RAPIDLY VARYING TOPOGRAPHY 25
1.86 REFERENCE FILE 26
1.87 REFERENCE FILE FORMAT 26
1.88 REFERENCE WATER DEPTH FOR AUTOMATIC PHASE 26
1.89 RELAXATION ON TETAP 26
1.90 RESULTS FILE 27
1.91 RESULTS FILE FORMAT 27
1.92 RIPPLES COEFFICIENT 27
1.93 S EXPONENT 27
1.94 SEDIMENT SPECIFIC WEIGHT 28
1.95 SKIN ROUGHNESS ONLY 28
1.96 SOLVER 28
1.97 SOLVER ACCURACY 28
1.98 SOLVER OPTION 29
1.99 STEERING FILE 29
1.100 STEP FOR PERIOD SCANNING 29
1.101 SUB-ITERATIONS ACCURACY FOR CURRENT 29
1.102 SUB-ITERATIONS ACCURACY FOR DISSIPATION 29
1.103 SUB-ITERATIONS ACCURACY FOR TETAP 30
1.104 TIME STEP 30
1.105 TITLE 30
1.106 TOMAWAC LIQUID BOUNDARY FILE 30
1.107 TOMAWAC LIQUID BOUNDARY FILE FORMAT 30
1.108 TOMAWAC OUTER RESULT FILE 31
1.109 TOMAWAC OUTER RESULT FILE FORMAT 31
1.110 TOMAWAC OUTER SPECTRAL FILE 31
1.111 TOMAWAC OUTER SPECTRAL FILE FORMAT 31
1.112 VALIDATION 31
1.113 VARIABLES FOR GRAPHIC PRINTOUTS 32
1.114 VARIABLES TO BE PRINTED 33
1.115 VECTOR LENGTH 33
1.116 WAVE HEIGHTS SMOOTHING 33
1.117 WAVE PERIOD 33
1.118 ZERO 34

2 List of keywords classified according to type . . . . . . . . . . . . . . . . . 35

2.1 BOUNDARY CONDITIONS 35
2.1.1 AUTOMATIC PHASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.1.2 AUTOMATIC TETAP ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.1.3 MONOCHROMATIC WAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.1.4 PERIODS SCANNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.1.5 RANDOM WAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.2 COMPUTATION ENVIRONMENT 36
2.2.1 GLOBAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.2.2 INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.2.3 OUTPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.3 GENERAL PARAMETERS 37
2.3.1 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.3.2 TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.4 INTERNAL 37
2.5 NESTING WITH TOMAWAC 38
2.5.1 INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.5.2 OUTPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6

2.6 NUMERICAL PARAMETERS 38

2.6.1 DISSIPATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.6.2 SOLVER INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.7 PHYSICAL PARAMETERS 38
2.7.1 CURRENT INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.7.2 DISSIPATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.7.3 INITIALIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.7.4 VARYING TOPOGRAPHY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.1 English/French glossary 40
3.2 French/English glossary 43

Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
 1. Detail list of keywords

1.1 ALPHA
Type : Real
Dimension : 0
Mnemo ALFABJ
DEFAULT VALUE : 1.0
French keyword : ALPHA
Fixes the coefficient α used in the formulation of the dissipation coefficient through breaking
proposed by Battjes & Janssen, 1978 for random waves.

1.2 AMPLITUDE AND PHASE FILE

Type : String
Dimension : 0
Mnemo ART_FILES(ARTAMP)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DES PHASES ET AMPLITUDES
Name of the results file corresponding to the computations and which contains the phase and
amplitude at every point for all the periods and directions specified in the steering file.

1.3 AMPLITUDE AND PHASE FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(ARTAMP)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DES PHASES ET AMPLITUDES
Format of the AMPLITUDE AND PHASE FILE. Possible choices are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

 8 Chapter 1. Detail list of keywords

1.4 AUTOMATIC CALCULATION OF PHASE

Type : Logical
Dimension : 0
Mnemo LPHASEAUTO
DEFAULT VALUE : NO
French keyword : CALCUL AUTOMATIQUE DE LA PHASE
TRUE: automatic calculation of incident phase (based on reference water depth).

1.5 AUTOMATIC TETAP CALCULATION

Type : Logical
Dimension : 0
Mnemo LANGAUTO
DEFAULT VALUE : NO
French keyword : CALCUL AUTOMATIQUE DE TETAP
If = TRUE: automatic calculation of θ p (based on velocity direction).

1.6 BEGINNING PERIOD FOR PERIOD SCANNING

Type : Real
Dimension : 0
Mnemo PERDEB
DEFAULT VALUE : 0.
French keyword : PERIODE DE DEBUT POUR LE BALAYAGE EN PERIODE
Used with the option PERIOD SCANNING = YES. Fixes the minimum value (in seconds) of
the period range to be used for the period scanning.

1.7 BINARY DATA FILE 1

Type : String
Dimension : 1
Mnemo ART_FILES(ARTBI1)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE DONNEES BINAIRE 1
Data file, written in binary mode, at the disposal of the user.

1.8 BINARY DATA FILE 1 FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(ARTBI1)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE DONNEES BINAIRE 1
BINARY DATA FILE 1 format. Possible values are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

 1.9 BINARY DATA FILE 2 9

1.9 BINARY DATA FILE 2

Type : String
Dimension : 1
Mnemo ART_FILES(ARTBI2)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE DONNEES BINAIRE 2
Data file, written in binary mode, at the disposal of the user.

1.10 BINARY DATA FILE 2 FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(ARTBI2)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE DONNEES BINAIRE 2
BINARY DATA FILE 2 format. Possible values are:
• SERAFIN : classical single precision format in T ELEMAC,
• SERAFIND: classical double precision format in T ELEMAC,
• MED : MED double precision format based on HDF5.

1.11 BINARY RESULTS FILE

Type : String
Dimension : 1
Mnemo ART_FILES(ARTRBI)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DES RESULTATS BINAIRE
Results file, written in binary mode, at the disposal of the user.

1.12 BOTTOM FRICTION LAW

Type : Integer
Dimension : 0
Mnemo FORMFR
DEFAULT VALUE : 1
French keyword : FORMULATION DU FROTTEMENT DE FOND
Used with the option FRICTION = YES. Fixes the formulation used for bottom friction law:
• 1: Kostense et al., 1986,
• 2: Putnam & Johnson, 1949.

1.13 BOTTOM TOPOGRAPHY FILE

Type : String
Dimension : 1
Mnemo ART_FILES(ARTFON)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DES FONDS
Name of a potential bathymetry file. If this keyword is specified, the bathymetry which it is
defining is accounted for.
 10 Chapter 1. Detail list of keywords

1.14 BOTTOM TOPOGRAPHY SMOOTHING

Type : Integer
Dimension : 1
Mnemo LISFON
DEFAULT VALUE : 0
French keyword : LISSAGES DU FOND
Number of smoothings done on the topography. Each smoothing, using a mass matrix, is con-
servative. It is used when bathymetric data provide too irregular results after interpolation.

1.15 BOUNDARY CONDITIONS FILE

Type : String
Dimension : 1
Mnemo ART_FILES(ARTCLI)%NAME
DEFAULT VALUE : ’MANDATORY’
French keyword : FICHIER DES CONDITIONS AUX LIMITES
Name of the boundary conditions file. It is automatically built by S TBTEL or by the mesh
generator MATISSE.

1.16 BREAKING
Type : Logical
Dimension : 0
Mnemo DEFERL
DEFAULT VALUE : NO
French keyword : DEFERLEMENT
Yes, if one wants to account for breaking process (see also reals of index 18, 19, 20, 21, 22, 23,
and integer of index 12, 13).

1.17 BREAKING LAW

Type : Integer
Dimension : 0
Mnemo IBREAK
DEFAULT VALUE : 1
French keyword : FORMULATION DU DEFERLEMENT
Specifies the formulation chosen for calculating the dissipation coefficient through breaking.
Only effective for monochromatic wave mode.

• 1: Formulation of Battjes & Janssen, 1978,

• 2: Formulation of Dally et al., 1984.

In random wave mode, the formulation of B & J, 1978 is the only one to be used.

1.18 CHECKING THE MESH

Type : Logical
Dimension : 1
Mnemo CHECK_MESH
DEFAULT VALUE : NO
French keyword : VERIFICATION DU MAILLAGE
 1.19 CONCATENATE PARTEL OUTPUT 11

If this keyword is equal to YES, a call to subroutine CHECKMESH will look for errors in the
mesh, superimposed points, etc.

1.19 CONCATENATE PARTEL OUTPUT

Type : Logical
Dimension : 1
Mnemo CONCAT_PARTEL
DEFAULT VALUE : NO
French keyword : CONCATENATION SORTIE PARTEL
With this option, partel no more generates a file (GEO/CLI/PAR) per process but a single con-
catenate file of them, associated to an index file. Then instead of having partel generating 3P
files, it only generates 6 files.

1.20 COORDINATES OF THE REFERENCE F SPECTRUM

Type : Real
Dimension : 2
Mnemo X_SFREF,Y_SFREF
DEFAULT VALUE : -99999.9;-99999.9
French keyword : COORDONNEES POUR LE SPECTRE F DE REFERENCE
Coordinates for the frequency spectrum reference point.

1.21 CURRENT
Type : Logical
Dimension : 0
Mnemo COURANT
DEFAULT VALUE : NO
French keyword : COURANT
If = TRUE: Wave refraction due to current is described using Kostense model (1988).

1.22 DEBUGGER
Type : Integer
Dimension : 1
Mnemo DEBUG
DEFAULT VALUE : 0
French keyword : DEBUGGER
If 1, calls of subroutines will be printed in the listing.

1.23 DIAMETER50
Type : Real
Dimension : 0
Mnemo DIAM50
DEFAULT VALUE : 0.10E-3
French keyword : DIAMETRE50
DIAM50 is the maximum grain diameter, in m, which defines 50 % of the total weight of
sediment. Usually, we have DIAM90 = 1.5 × DIAM50. DIAM50 is a more common value
used.
 12 Chapter 1. Detail list of keywords

• 0.66E-3: for very coarse sand,

• 0.33E-3: for coarse sand,

• 0.17E-3: for medium sand,

• 0.083E-3: for fine sand,

• 0.040E-3: for very fine sand,

• 0.10E-3: default value.

1.24 DIAMETER90
Type : Real
Dimension : 0
Mnemo DIAM90
DEFAULT VALUE : 0.15E-3
French keyword : DIAMETRE90
DIAM90 is the maximum grain diameter, in m, which defines 90 % of the total weight of
sediment.

• 1.0E-3: for very coarse sand,

• 0.5E-3: for coarse sand,

• 0.25E-3: for medium sand,

• 0.125E-3: for fine sand,

• 0.062E-3: for very fine sand,

• 0.15E-3: default value.

1.25 DICTIONARY
Type : String
Dimension : 1
Mnemo
DEFAULT VALUE : ’artemis.dico’
French keyword : DICTIONNAIRE
Key word dictionary.

1.26 DIRECTION OF WAVE PROPAGATION

Type : Real
Dimension : 0
Mnemo TETAH
DEFAULT VALUE : 0.0
French keyword : DIRECTION DE PROPAGATION DE LA HOULE
Fixes the direction towards the incident waves at boundaries go to. It is counted in degrees
and positively in the trigonometric sense relatively to the x axis. This value is prescribed as
a constant value along all the wave incident type boundaries. If one wants to specify a non
uniform value, the user has to specify the value TETAB in the subroutine BORH.
 1.27 DISSIPATION RELAXATION 13

1.27 DISSIPATION RELAXATION

Type : Real
Dimension : 0
Mnemo RELDIS
DEFAULT VALUE : 0.5
French keyword : RELAXATION SUR LA DISSIPATION
Fixes the relaxation coefficient used between two sub-iterations for the computation of the dis-
sipation term.

1.28 ENDING PERIOD FOR PERIOD SCANNING

Type : Real
Dimension : 0
Mnemo PERFIN
DEFAULT VALUE : 0.
French keyword : PERIODE DE FIN POUR LE BALAYAGE EN PERIODE
Used with the option PERIOD SCANNING = YES. Fixes the maximum value (in seconds) of
the period range to be used for the period scanning.

1.29 FIRST TIME IN THE FREE SURFACE FILE

Type : Real
Dimension : 0
Mnemo TINIFS
DEFAULT VALUE : 10000.
French keyword : PREMIER TEMPS DANS LE FICHIER DE SURFACE LIBRE
Determines the time from which the results are written in the FREE SURFACE FILE.

1.30 FLUID KINEMATIC VISCOSITY

Type : Real
Dimension : 0
Mnemo VISCO
DEFAULT VALUE : 1.0E-6
French keyword : VISCOSITE CINEMATIQUE DU FLUIDE
Kinematic viscosity of the fluid (water) in m2 /s.

• 1.793E-6: for a temperature of 0 C,

• 1.567E-6: for a temperature of 4 C,

• 1.237E-6: for a temperature of 12 C,

• 1.112E-6: for a temperature of 16 C,

• 1.011E-6: for a temperature of 20 C,

• 0.802E-6: for a temperature of 30 C,

• 0.661E-6: for a temperature of 40 C,

• 1.0E-6: default value.

 14 Chapter 1. Detail list of keywords

1.31 FLUID SPECIFIC MASS

Type : Real
Dimension : 0
Mnemo MVEAU
DEFAULT VALUE : 1000.0
French keyword : MASSE VOLUMIQUE DU FLUIDE
Fluid specific weight (water) in kg/m3 .

1.32 FORMATTED DATA FILE 1

Type : String
Dimension : 1
Mnemo ART_FILES(ARTFO1)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE DONNEES FORMATE 1
Data file, written in ASCII mode, at the disposal of the user.

1.33 FORMATTED DATA FILE 2

Type : String
Dimension : 0
Mnemo ART_FILES(ARTFO2)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE DONNEES FORMATE 2
Data file, written in ASCII mode, at the disposal of the user.

1.34 FORMATTED RESULTS FILE

Type : String
Dimension : 1
Mnemo ART_FILES(ARTRFO)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DES RESULTATS FORMATE
Results file, written in ASCII mode, at the disposal of the user.

1.35 FORTRAN FILE

Type : String
Dimension : 1
Mnemo NOMFOR
DEFAULT VALUE : ”
French keyword : FICHIER FORTRAN
Name of the FORTRAN file to be submitted, including specific subroutines of the model.

1.36 FREE SURFACE ANIMATION

Type : Logical
Dimension : 0
Mnemo ANIMFS
DEFAULT VALUE : NO
French keyword : ANIMATION DE LA SURFACE LIBRE
This option informs that the phase and amplitude file is to be generated. This file will be used to
 1.37 FREE SURFACE FILE 15

determine the free surface elevation throughout the model area. Remember to give AMPLITUDE
AND PHASE FILE and FREE SURFACE FILE.

1.37 FREE SURFACE FILE

Type : String
Dimension : 0
Mnemo NOMFST
DEFAULT VALUE : ”
French keyword : FICHIER DE SURFACE LIBRE
Name of the results file corresponding to the computations and which contains the free surface
at every point as a function of time. This file can be animated to check free surface variations
with time.

1.38 FREE SURFACE FILE FORMAT

Type : String
Dimension : 1
Mnemo ?????
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE SURFACE LIBRE
Format of the FREE SURFACE FILE. Possible values are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

1.39 FRICTION
Type : Logical
Dimension : 0
Mnemo FROTTE
DEFAULT VALUE : NO
French keyword : FROTTEMENT
Yes, if one wants to include dissipation through bottom friction in the computation.

1.40 FRICTION COEFFICIENT

Type : Real
Dimension : 0
Mnemo FFON
DEFAULT VALUE : 0.
French keyword : COEFFICIENT DE FROTTEMENT
Do not confuse with the FRICTION FACTOR. Not used in A RTEMIS. It is let here for consis-
tence with T ELEMAC -2 D.
 16 Chapter 1. Detail list of keywords

1.41 FRICTION FACTOR

Type : Real
Dimension : 0
Mnemo FWCOEF
DEFAULT VALUE : 0.
French keyword : FACTEUR DE FROTTEMENT
Used with the option FRICTION FACTOR IMPOSED = YES. Fixes the value of the friction
factor uniform over the domain.

1.42 FRICTION FACTOR IMPOSED

Type : Logical
Dimension : 0
Mnemo ENTFW
DEFAULT VALUE : NO
French keyword : FACTEUR DE FROTTEMENT IMPOSE
Used with the option FRICTION = YES. If YES, enables the user to impose a friction factor,
by a keyword for a constant value (see real of index 29) or by programming in the FWSPEC
subroutine for non-uniform value. If NO, A RTEMIS automatically computes the friction factor
assuming that the bottom is sandy and uses the characteristics of sediment and of motion.

1.43 GAMMA
Type : Real
Dimension : 0
Mnemo GAMMA
DEFAULT VALUE : 3.3
French keyword : GAMMA
Used with option MONODIRECTIONAL RANDOM WAVE = YES or MULTIDIRECTIONAL
RANDOM WAVE = YES. Fixes the γ value tor the JONSWAP wave energy spectrum:
• GAMMA = 1: Pierson-Moskowitz,
• GAMMA = 3.3: mean JONSWAP spectrum (default value).

1.44 GAMMAS
Type : Real
Dimension : 0
Mnemo GAMMAS
DEFAULT VALUE : 0.88
French keyword : GAMMAS
Fixes the coefficient γs used in the criterion of the critical breaking wave height. Do not confuse
with coefficient γ used in the JONSWAP spectrum.

1.45 GDALLY
Type : Real
Dimension : 0
Mnemo GDALLY
DEFAULT VALUE : 0.4
French keyword : GDALLY
Fixes the Γ coefficient used in the formulation of Dally et al., 1984, for the dissipation coeffi-
 1.46 GEOMETRY FILE 17

cient in surf-breaking. Do not confuse with the coefficient γ used in the JONSWAP formulae
and coefficient gammas used to determine the breaking wave height criterion.

1.46 GEOMETRY FILE

Type : String
Dimension : 1
Mnemo NOMGEO
DEFAULT VALUE : ’MANDATORY’
French keyword : FICHIER DE GEOMETRIE
Name of the file which contains the computational mesh.

1.47 GEOMETRY FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(ARTGEO)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE GEOMETRIE
Format of the GEOMETRY FILE. Possible values are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

1.48 GRAPHIC PRINTOUT PERIOD

Type : Integer
Dimension : 1
Mnemo LEOPRD
DEFAULT VALUE : 1
French keyword : PERIODE DE SORTIE GRAPHIQUE
Fixes the period, in number of wave periods, for the writing of the VARIABLES FOR GRAPHIC
PRINTOUTS (see this keyword) in the RESULTS FILE.

1.49 GRAVITY ACCELERATION

Type : Real
Dimension : 1
Mnemo GRAV
DEFAULT VALUE : 9.81
French keyword : ACCELERATION DE LA PESANTEUR
Sets the value of the acceleration due to gravity in m/s2 .

1.50 HYDRAULIC REGIME IMPOSED

Type : Logical
Dimension : 0
Mnemo ENTREG
DEFAULT VALUE : NO
French keyword : REGIME HYDRAULIQUE IMPOSE
 18 Chapter 1. Detail list of keywords

Used with the option FRICTION = YES. Enables to impose the hydraulic regime in the case of
an automatic calculation of the friction factor for sandy beds.

1.51 HYDRAULIC REGIME TYPE

Type : Integer
Dimension : 0
Mnemo REGIDO
DEFAULT VALUE : 1
French keyword : TYPE DU REGIME HYDRAULIQUE
Used with option HYDRAULIC REGIME IMPOSED = YES. Determines the type of the hy-
draulic regime (laminar, smooth-turbulent, rough-turbulent, transient).

• laminar regime,

• smooth-turbulent regime,

• rough-turbulent regime,

• transient regime.

1.52 INFORMATIONS ABOUT SOLVER

Type : Logical
Dimension : 1
Mnemo INFOGR
DEFAULT VALUE : YES
French keyword : INFORMATIONS SUR LE SOLVEUR
Gives the iterations number which was necessary for the solver to converge.

1.53 INITIAL CONDITIONS

Type : String
Dimension : 1
Mnemo CDTINI
DEFAULT VALUE : ’ZERO ELEVATION’
French keyword : CONDITIONS INITIALES
Enables to define the initial conditions on water depths. The possible values are as follows:

• ZERO ELEVATION: fixes the free surface level to 0. Water depths are then equal to the
difference between free surface level and bottom level,

• CONSTANT ELEVATION: fixes the free surface level to the value specified by the key-
word INITIAL WATER LEVEL. Water level are then computed as before,

• ZERO DEPTH: initializes the water depths to 0,

• CONSTANT DEPTH: initializes the water depths to the value specified by the keyword
INITIAL DEPTH,

• SPECIAL: initial conditions on water depths are to be precised in the subroutine CONDIH.
 1.54 INITIAL DEPTH 19

1.54 INITIAL DEPTH

Type : Real
Dimension : 0
Mnemo HAUTIN
DEFAULT VALUE : 0.
French keyword : HAUTEUR INITIALE
Value to be used along with the option INITIAL CONDITIONS: ”CONSTANT DEPTH”.

1.55 INITIAL WATER LEVEL

Type : Real
Dimension : 1
Mnemo COTINI
DEFAULT VALUE : 0.
French keyword : COTE INITIALE
Value to be used with the option INITIAL CONDITIONS: ”CONSTANT ELEVATION”.

1.56 INSTANT FOR READING TOMAWAC SPECTRUM

Type : Real
Dimension : 0
Mnemo TPSTWC
DEFAULT VALUE : 0.
French keyword : INSTANT DE LECTURE DU SPECTRE TOMAWAC
Give the instant of the T OMAWAC computation at which we want to import the spectrum for
A RTEMIS.

1.57 KDALLY
Type : Real
Dimension : 0
Mnemo KDALLY
DEFAULT VALUE : 0.1
French keyword : KDALLY
Fixes the coefficient K used in the formulation of the dissipation coefficient proposed by Dally
et al. 1984.

1.58 LISTING PRINTOUT

Type : Logical
Dimension : 1
Mnemo LISTIN
DEFAULT VALUE : YES
French keyword : SORTIE LISTING
If NO is specified for this keyword, the printout listing just contains the head and the sentence
END OF PROGRAM. It is advised not to use this way.
 20 Chapter 1. Detail list of keywords

1.59 LISTING PRINTOUT PERIOD

Type : Integer
Dimension : 1
Mnemo LISPRD
DEFAULT VALUE : 1
French keyword : PERIODE DE SORTIE LISTING
Fixes the period, in number of wave periods, for the writing of the VARIABLES TO BE
PRINTED (see this keyword).

1.60 MATRIX STORAGE

Type : Integer
Dimension : 1
Mnemo OPTASS
DEFAULT VALUE : 3
French keyword : STOCKAGE DES MATRICES
Defines the method to store matrices. The possible choices are:

• 1: classical EBE,

• 2: assembled EBE,

• 3: edge-based storage.

Beware, with option 2, a special numbering of points is required.

1.61 MATRIX-VECTOR PRODUCT

Type : Integer
Dimension : 1
Mnemo PRODUC
DEFAULT VALUE : 1
French keyword : PRODUIT MATRICE-VECTEUR
Possible choices are:

• 1: Classical Product,

• 2: New Frontal Product.

1.62 MAXIMUM ANGLE OF PROPAGATION

Type : Real
Dimension : 0
Mnemo TETMAX
DEFAULT VALUE : 180.
French keyword : ANGLE MAXIMUM DE PROPAGATION
Used with the option MULTIDIRECTIONAL RANDOM WAVE = YES. Fixes the maximum
value (in degrees) of the directions range. It is counted positively in the trigonometric sense
relatively to the x axis.
 1.63 MAXIMUM NUMBER OF ITERATIONS FOR SOLVER 21

1.63 MAXIMUM NUMBER OF ITERATIONS FOR SOLVER

Type : Integer
Dimension : 1
Mnemo SLVART%NITMAX
DEFAULT VALUE : 60000
French keyword : MAXIMUM D’ITERATIONS POUR LE SOLVEUR
Algorithms used for solving the matrix system are iterative. It is then necessary to limit the
maximum number of iterations.

1.64 MAXIMUM OF SUB-ITERATIONS

Type : Integer
Dimension : 0
Mnemo NITDIS
DEFAULT VALUE : 15
French keyword : MAXIMUM DE SOUS-ITERATIONS
Fixes the maximum number of sub-iterations for the computation of dissipation.

1.65 MAXIMUM OF SUB-ITERATIONS FOR TETAP

Type : Integer
Dimension : 0
Mnemo NITTP
DEFAULT VALUE : 15
French keyword : MAXIMUM DE SOUS-ITERATIONS POUR TETAP
Fixes the maximum number of sub-iterations for the automatic computation of θ p .

1.66 MAXIMUM SPECTRAL PERIOD

Type : Real
Dimension : 0
Mnemo PMAX
DEFAULT VALUE : 200.
French keyword : PERIODE MAXIMUM DU SPECTRE
Maximum period value requested in seconds if it is necessary to alter the energy spectrum for
the computation of the periods in the case of random waves (see PERALE subroutine).

1.67 MINIMUM ANGLE OF PROPAGATION

Type : Real
Dimension : 0
Mnemo TETMIN
DEFAULT VALUE : -180.
French keyword : ANGLE MINIMUM DE PROPAGATION
Used with the option MULTIDIRECTIONAL RANDOM WAVE = YES. Fixes the minimum
value (in degrees) of the directions range. It is counted positively in the trigonometric sense
relatively to the x axis.
 22 Chapter 1. Detail list of keywords

1.68 MINIMUM SPECTRAL PERIOD

Type : Real
Dimension : 0
Mnemo PMIN
DEFAULT VALUE : 0.02
French keyword : PERIODE MINIMUM DU SPECTRE
Minimum period value requested in seconds if it is necessary to alter the energy spectrum for
the computation of the periods in the case of random waves (see PERALE subroutine).

1.69 MONODIRECTIONAL RANDOM WAVE

Type : Logical
Dimension : 0
Mnemo ALEMON
DEFAULT VALUE : NO
French keyword : HOULE ALEATOIRE MONODIRECTIONNELLE
Yes, if one wants to run computation in random monodirectional waves (see real keywords of
index 12, 13 and integer of index 10).

1.70 MULTIDIRECTIONAL RANDOM WAVE

Type : Logical
Dimension : 0
Mnemo ALEMUL
DEFAULT VALUE : NO
French keyword : HOULE ALEATOIRE MULTIDIRECTIONNELLE
Yes, if one wants to run computation in random multidirectional waves (see real keywords of
index 12, 13 and integer of index 10).

1.71 NESTING WITHIN TOMAWAC OUTER MODEL

Type : Integer
Dimension : 0
Mnemo CHAINTWC
DEFAULT VALUE : 0
French keyword : CHAINAGE AVEC MODELE GLOBAL TOMAWAC
Remember to give NUMBER OF DIRECTIONS IN TOMAWAC SPECTRUM and NUMBER
OF FREQUENCIES IN TOMAWAC SPECTRUM with option 1. Remember to give TOMAWAC
OUTER RESULT FILE, TOMAWAC OUTER SPECTRAL FILE and COORDINATES OF THE
REFERENCE F SPECTRUM if using option 2. INSTANT FOR READING TOMAWAC SPECTRUM
required in cases 1 and 2.

1.72 NUMBER OF DIRECTIONS

Type : Integer
Dimension : 0
Mnemo NDALE
DEFAULT VALUE : 5
French keyword : NOMBRE DE DIRECTIONS DE DISCRETISATION
Used with the option MULTIDIRECTIONAL RANDOM WAVE = YES. It fixes the number of
iso-energy bands which discretizes the wave directional spectrum.
 1.73 NUMBER OF PERIODS 23

1.73 NUMBER OF PERIODS

Type : Integer
Dimension : 0
Mnemo NPALE
DEFAULT VALUE : 5
French keyword : NOMBRE DE PERIODES DE DISCRETISATION
Used with option MONODIRECTIONAL RANDOM WAVE = YES or MULTIDIRECTIONAL
RANDOM WAVE = YES. It fixes the number of iso-energy frequency bands which discretize the
energy spectrum.

1.74 NUMBER OF PRIVATE VARIABLES

Type : Integer
Dimension : 1
Mnemo NPRIV
DEFAULT VALUE : 0
French keyword : NOMBRE DE VARIABLES PRIVEES
Give the number of private variables.

1.75 NUMBER OF TIME STEPS

Type : Integer
Dimension : 1
Mnemo NITFS
DEFAULT VALUE : 0
French keyword : NOMBRE DE PAS DE TEMPS
Specifies the number of time steps in FREE SURFACE FILE.

1.76 ORIGIN COORDINATES

Type : Integer
Dimension : 2
Mnemo I_ORIG,J_ORIG
DEFAULT VALUE : 0;0
French keyword : COORDONNEES DE L’ORIGINE
Value in metres, used to avoid large real numbers, added in SERAFIN format, but so far no
other treatment.

1.77 ORIGINAL DATE OF TIME

Type : Integer
Dimension : 3
Mnemo MARDAT
DEFAULT VALUE : 0;0;0
French keyword : DATE DE L’ORIGINE DES TEMPS
Give the date of the time origin of the model when taking into account the tide generating force.
 24 Chapter 1. Detail list of keywords

1.78 ORIGINAL HOUR OF TIME

Type : Integer
Dimension : 3
Mnemo MARTIM
DEFAULT VALUE : 0;0;0
French keyword : HEURE DE L’ORIGINE DES TEMPS
Give the time of the time origin of the model when taking into account the tide generating force.

1.79 PARALLEL PROCESSORS

Type : Integer
Dimension : 1
Mnemo NCSIZE
DEFAULT VALUE : 0
French keyword : PROCESSEURS PARALLELES
Number of processors for domain partition:

• 0: 1 machine, compiling without parallel library,

• 1: 1 machine, compiling with a parallel library,

• 2: 2 processors or machines in parallel. etc...

1.80 PARTITIONING TOOL

Type : String
Dimension : 1
Mnemo
DEFAULT VALUE : ’METIS’
French keyword : PARTITIONNEUR
Partitioning tool selection:

• 1: METIS,

• 2: SCOTCH,

• 3: PARMETIS,

• 4: PTSCOTCH.

1.81 PEAK PERIOD

Type : Real
Dimension : 0
Mnemo PERPIC
DEFAULT VALUE : 10.0
French keyword : PERIODE DE PIC
Used with option MONODIRECTIONAL RANDOM WAVE = YES or MULTIDIRECTIONAL
RANDOM WAVE = YES. Fixes the peak period (in seconds) of the energy spectrum.
 1.82 PERIOD SCANNING 25

1.82 PERIOD SCANNING

Type : Logical
Dimension : 0
Mnemo BALAYE
DEFAULT VALUE : NO
French keyword : BALAYAGE EN PERIODE
Yes, if one wants to run computations by scanning a period range (resonance computations, see
also reals of index 8, 9, and 10).

1.83 PHASE REFERENCE COORDINATES

Type : Real
Dimension : 2
Mnemo X_PHREF,Y_PHREF
DEFAULT VALUE : 0.;0.
French keyword : COORDONNEES DE REFERENCE POUR LA PHASE
Coordinates of reference point for phase. Will not change the wave height computed.

1.84 PRECONDITIONING
Type : Integer
Dimension : 1
Mnemo SLVART%PRECON
DEFAULT VALUE : 2
French keyword : PRECONDITIONNEMENT
Enables to apply preconditionning the matrix system to accelerate the convergence of the solver.

• 0: no preconditionning,

• 2: diagonal preconditionning,

• 3: block-diagonal preconditionning,

• 5: diagonal preconditionning in absolute value,

• 7: Element Crout preconditionning.

Few of them can be combined (numbers 2 or 3 with the other). To combine some precondition-
nings, impose the product of the previous numbers: example 6 means preconditioning 2 and 3
applied.

1.85 RAPIDLY VARYING TOPOGRAPHY

Type : Integer
Dimension : 0
Mnemo IPENTCO
DEFAULT VALUE : 0
French keyword : VARIATION RAPIDE DE LA BATHYMETRIE
Extension of mild-slope equation with second order bottom effects

• 0: mild-slope equation,

• 1: gradient second order term: grad(h)2 ,

 26 Chapter 1. Detail list of keywords

• 2: curvature second order term: laplacian(h),

• 3: gradient + curvature second order terms.

Model used for functions E1 and E2 expression: Chamberlain and Porter (1995).

1.86 REFERENCE FILE

Type : String
Dimension : 1
Mnemo ART_FILES(ARTREF)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE REFERENCE
Binary-coded result file for validation.

1.87 REFERENCE FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(ARTREF)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE REFERENCE
REFERENCE FILE format. Possible values are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

1.88 REFERENCE WATER DEPTH FOR AUTOMATIC PHASE

Type : Real
Dimension : 0
Mnemo DEPREF
DEFAULT VALUE : -1.0
French keyword : PROFONDEUR DE REFERENCE POUR LA PHASE AUTOMATIQUE
Water depth for automatic incident phase calculation. Try to put the incident wave boundary
on a regular topography zone. The reference water depth should be representative of the water
depth on the boundary.

1.89 RELAXATION ON TETAP

Type : Real
Dimension : 0
Mnemo RELTP
DEFAULT VALUE : 1.
French keyword : RELAXATION SUR TETAP
Fixes the relaxation coefficient used between two sub-iterations for the computation of auto-
matic θ p .
 1.90 RESULTS FILE 27

1.90 RESULTS FILE

Type : String
Dimension : 1
Mnemo ART_FILES(ARTRES)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DES RESULTATS
Name of the results file corresponding to the computations and which contains the variables
specified by the keyword VARIABLES FOR GRAPHIC PRINTOUTS.

1.91 RESULTS FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(ARTRES)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE RESULTATS
Format of the RESULTS FILE. Possible values are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

1.92 RIPPLES COEFFICIENT

Type : Real
Dimension : 0
Mnemo RICOEF
DEFAULT VALUE : 0.7
French keyword : COEFFICIENT DE RIDES
Fixes the ripples coefficient used in the formulae of Van Rijn to calculate the friction factor:

• 1.0: for single ripples,

• 0.7: for ripples superimposed to sand waves.

1.93 S EXPONENT
Type : Real
Dimension : 0
Mnemo EXPOS
DEFAULT VALUE : 20.
French keyword : EXPOSANT S
Used with the option MULTIDIRECTIONAL RANDOM WAVE = YES. Fixes the maximum
value of exponent S in the Goda formula used to express the directional wave energy spreading.
See GODA Y., Random Seas and Design of Maritime Structures - Univ. of Tokyo Press, 1987.
 28 Chapter 1. Detail list of keywords

1.94 SEDIMENT SPECIFIC WEIGHT

Type : Real
Dimension : 0
Mnemo MVSED
DEFAULT VALUE : 2650.0
French keyword : MASSE VOLUMIQUE DU SEDIMENT
Sediment specific weight in kg/m3 .

1.95 SKIN ROUGHNESS ONLY

Type : Logical
Dimension : 0
Mnemo ENTRUG
DEFAULT VALUE : NO
French keyword : RUGOSITE DE PEAU SEULE
Used with the option FRICTION = YES. Enables to restrict the total roughness to the skin
roughness in the case of an automatic calculation of the friction factor for sandy beds.

1.96 SOLVER
Type : Integer
Dimension : 1
Mnemo SLVART%SLV
DEFAULT VALUE : 8
French keyword : SOLVEUR
Enables to choose the solver used for solving the matrix system. They are:

• 1: conjugate gradient,

• 2: conjugate residual,

• 3: conjugate gradient on the normal equation,

• 4: minimum error,

• 5: squared conjugate gradient (not programmed),

• 6: CGSTAB conjugate gradient,

• 7: GMRES,

• 8: direct solver.

1.97 SOLVER ACCURACY

Type : Real
Dimension : 1
Mnemo SLVART%EPS
DEFAULT VALUE : 1.E-4
French keyword : PRECISION DU SOLVEUR
Accuracy requested for the linear system solver.
 1.98 SOLVER OPTION 29

1.98 SOLVER OPTION

Type : Integer
Dimension : 1
Mnemo SLVART%KRYLOV
DEFAULT VALUE : 3
French keyword : OPTION DU SOLVEUR
Defines the dimension of the Krylov space when using the solver 7 (GMRES).

1.99 STEERING FILE

Type : String
Dimension : 1
Mnemo NOMCAS
DEFAULT VALUE : ”
French keyword : FICHIER DES PARAMETRES
Name of the steering file used for the computation.

1.100 STEP FOR PERIOD SCANNING

Type : Real
Dimension : 0
Mnemo PERPAS
DEFAULT VALUE : 0.
French keyword : PAS POUR LE BALAYAGE EN PERIODE
Used with the option PERIOD SCANNING = YES. Fixes the value of the period step (in sec-
onds) to be used for the period scanning.

1.101 SUB-ITERATIONS ACCURACY FOR CURRENT

Type : Real
Dimension : 0
Mnemo EPSDIR
DEFAULT VALUE : 1.E-2
French keyword : PRECISION SUR LES SOUS-ITERATIONS POUR COURANT
Fixes the accuracy requested for sub-iterations necessary to determine the wave vector.

1.102 SUB-ITERATIONS ACCURACY FOR DISSIPATION

Type : Real
Dimension : 0
Mnemo EPSDIS
DEFAULT VALUE : 1.E-2
French keyword : PRECISION SUR LES SOUS-ITERATIONS POUR LA DISSIPATION
Fixes the accuracy requested for sub-iterations necessary to determine the dissipation coeffi-
cients.
 30 Chapter 1. Detail list of keywords

1.103 SUB-ITERATIONS ACCURACY FOR TETAP

Type : Real
Dimension : 0
Mnemo EPSTP
DEFAULT VALUE : 1.E-2
French keyword : PRECISION SUR LES SOUS-ITERATIONS POUR TETAP
Fixes the accuracy requested for sub-iterations necessary to determine value of θ p (criterion on
cos(θ p )).

1.104 TIME STEP

Type : Real
Dimension : 1
Mnemo DTFS
DEFAULT VALUE : 0.25
French keyword : PAS DE TEMPS
Specifies the time step in seconds in FREE SURFACE FILE.

1.105 TITLE
Type : String
Dimension : 1
Mnemo TITCAS
DEFAULT VALUE : ”
French keyword : TITRE
Title of the studied case.

1.106 TOMAWAC LIQUID BOUNDARY FILE

Type : String
Dimension : 1
Mnemo ART_FILES(WACLQD)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE FRONTIERES LIQUIDES TOMAWAC
Name of a file containing the liquid boundaries derived from an outer T OMAWAC wave model.

1.107 TOMAWAC LIQUID BOUNDARY FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(WACLQD)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE FRONTIERES LIQUIDES TOMAWAC
Format of the TOMAWAC LIQUID BOUNDARY FILE. Possible choices are:

• SERAFIN : classical single precision format in T ELEMAC,

• SERAFIND: classical double precision format in T ELEMAC,

• MED : MED double precision format based on HDF5.

 1.108 TOMAWAC OUTER RESULT FILE 31

1.108 TOMAWAC OUTER RESULT FILE

Type : String
Dimension : 1
Mnemo ART_FILES(WACRES)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE RESULTATS GLOBAL TOMAWAC
Name of a file containing the results of an outer T OMAWAC wave model.

1.109 TOMAWAC OUTER RESULT FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(WACRES)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE RESULTATS GLOBAL TOMAWAC
Format of the TOMAWAC OUTER RESULT FILE. Possible choices are:
• SERAFIN : classical single precision format in T ELEMAC,
• SERAFIND: classical double precision format in T ELEMAC,
• MED : MED double precision format based on HDF5.

1.110 TOMAWAC OUTER SPECTRAL FILE

Type : String
Dimension : 1
Mnemo ART_FILES(WACSPE)%NAME
DEFAULT VALUE : ”
French keyword : FICHIER DE SPECTRE GLOBAL TOMAWAC
Name of the spectral file from an outer T OMAWAC wave model.

1.111 TOMAWAC OUTER SPECTRAL FILE FORMAT

Type : String
Dimension : 1
Mnemo ART_FILES(WACSPE)%FMT
DEFAULT VALUE : ’SERAFIN’
French keyword : FORMAT DU FICHIER DE SPECTRE GLOBAL TOMAWAC
Format of the TOMAWAC OUTER SPECTRAL FILE. Possible choices are:
• SERAFIN : classical single precision format in T ELEMAC,
• SERAFIND: classical double precision format in T ELEMAC,
• MED : MED double precision format based on HDF5.

1.112 VALIDATION
Type : Logical
Dimension : 1
Mnemo VALID
DEFAULT VALUE : NO
French keyword : VALIDATION
This option is primarily used for the validation documents. The REFERENCE FILE is then
 32 Chapter 1. Detail list of keywords

considered as a reference which the computation is going to be compared with. The comparison
is made by the subroutine BIEF_VALIDA, which can be modified as to so as to include, for
example, a comparison with an exact solution.

1.113 VARIABLES FOR GRAPHIC PRINTOUTS

Type : String
Dimension : 1
Mnemo VARDES
DEFAULT VALUE : ’HS,PHAS,ZS,ZF’
French keyword : VARIABLES POUR LES SORTIES GRAPHIQUES
Names of the variables that the user wants to write in the RESULTS FILE. Separators between
variable names can be choosen free. The allowable values are:

• HS=wave height,

• PHAS=wave phase,

• U0=velocity u (free surface at t = 0),

• V0=velocity v (free surface at t = 0),

• ZS=free surface elevation (at t = 0),

• ZF=bottom elevation,

• HW=still water height,

• C=phase velocity,

• CG=group velocity,

• K=wave number,

• PHIR=real potential,

• PHII=imaginal potential,

• D=prive(1,1),

• E=prive(1,2),

• F=prive(1,3),

• G=prive(1,4),

• T01=first mean spectral period,

• T02=second mean spectral period,

• TM=third mean spectral period,

• FX=force along X,

• FY=force along Y,

• INC=wave incidence radian,

 1.114 VARIABLES TO BE PRINTED 33

• QB=breaking rate,

• SXX=SXX stress,

• SXY=SXY stress,

• SYY=SYY stress.

The user has 4 free variables at his/her disposal to create other variables by him/herself. These
variables have to be computed in the CALRES subroutine, and the name that we want to at-
tribute has to be precibed in the NOMVAR subroutine. The 4 free variable fields are: D, E, F,
G which corresponds to the private arrays PRIVE(1,1), PRIVE(1,2), PRIVE(1,3) and PRIVE
(1,4). Contrary to the previous variables, these are conserved all through the computation, and
can be used again. Do not forget to specify the number of private arrays you want to use in the
principal programme (variable NPRIV).

1.114 VARIABLES TO BE PRINTED

Type : String
Dimension : 0
Mnemo VARIMP
DEFAULT VALUE : ”
French keyword : VARIABLES A IMPRIMER
Name of variables taht the user whishes to write on the screen. Possibilities are the same as for
graphic outputs.

1.115 VECTOR LENGTH

Type : Integer
Dimension : 1
Mnemo LVMAC
DEFAULT VALUE : 1
French keyword : LONGUEUR DU VECTEUR
Vector length on vector machines.

1.116 WAVE HEIGHTS SMOOTHING

Type : Logical
Dimension : 0
Mnemo LISHOU
DEFAULT VALUE : NO
French keyword : LISSAGE DES HAUTEURS DE HOULE
YES when one wants to smooth the wave heights to improve the radiation stresses computation
(only used in regular wave mode). Default value = NO.

1.117 WAVE PERIOD

Type : Real
Dimension : 0
Mnemo PER
DEFAULT VALUE : 10.
French keyword : PERIODE DE LA HOULE
Defines the wave period for monochromatic mode.
 34 Chapter 1. Detail list of keywords

1.118 ZERO
Type : Real
Dimension : 0
Mnemo SLVART%ZERO
DEFAULT VALUE : 1.E-12
French keyword : ZERO
Non active at the moment.
 2. List of keywords classified according
to type

2.1 BOUNDARY CONDITIONS

PHASE REFERENCE COORDINATES

2.1.1 AUTOMATIC PHASE

AUTOMATIC CALCULATION OF PHASE
REFERENCE WATER DEPTH FOR AUTOMATIC PHASE

2.1.2 AUTOMATIC TETAP ANGLE

AUTOMATIC TETAP CALCULATION
MAXIMUM OF SUB-ITERATIONS FOR TETAP
RELAXATION ON TETAP
SUB-ITERATIONS ACCURACY FOR TETAP

2.1.3 MONOCHROMATIC WAVE

DIRECTION OF WAVE PROPAGATION
WAVE HEIGHTS SMOOTHING
WAVE PERIOD

2.1.4 PERIODS SCANNING

PERIOD SCANNING

DATA
BEGINNING PERIOD FOR PERIOD SCANNING
ENDING PERIOD FOR PERIOD SCANNING
STEP FOR PERIOD SCANNING
 36 Chapter 2. List of keywords classified according to type

2.1.5 RANDOM WAVE

GAMMA
MAXIMUM SPECTRAL PERIOD
MINIMUM SPECTRAL PERIOD
NUMBER OF PERIODS
PEAK PERIOD

MONODIRECTIONAL
MONODIRECTIONAL RANDOM WAVE

MULTIDIRECTIONAL
MAXIMUM ANGLE OF PROPAGATION
MINIMUM ANGLE OF PROPAGATION
MULTIDIRECTIONAL RANDOM WAVE
NUMBER OF DIRECTIONS
S EXPONENT

2.2 COMPUTATION ENVIRONMENT

2.2.1 GLOBAL
CHECKING THE MESH
PARALLEL PROCESSORS
TITLE
VECTOR LENGTH

2.2.2 INPUT
DATA
BINARY DATA FILE 1
BINARY DATA FILE 1 FORMAT
BINARY DATA FILE 2
BINARY DATA FILE 2 FORMAT
BOTTOM TOPOGRAPHY FILE
BOTTOM TOPOGRAPHY SMOOTHING
BOUNDARY CONDITIONS FILE
FORMATTED DATA FILE 1
FORMATTED DATA FILE 2
FORTRAN FILE
GEOMETRY FILE
GEOMETRY FILE FORMAT
REFERENCE FILE
REFERENCE FILE FORMAT
VALIDATION
 2.3 GENERAL PARAMETERS 37

2.2.3 OUTPUT
FREE SURFACE
AMPLITUDE AND PHASE FILE
AMPLITUDE AND PHASE FILE FORMAT
FIRST TIME IN THE FREE SURFACE FILE
FREE SURFACE ANIMATION
FREE SURFACE FILE
FREE SURFACE FILE FORMAT
NUMBER OF TIME STEPS
TIME STEP

LISTING
INFORMATIONS ABOUT SOLVER
LISTING PRINTOUT
LISTING PRINTOUT PERIOD
VARIABLES TO BE PRINTED

RESULTS
BINARY RESULTS FILE
FORMATTED RESULTS FILE
GRAPHIC PRINTOUT PERIOD
NUMBER OF PRIVATE VARIABLES
RESULTS FILE
RESULTS FILE FORMAT
VARIABLES FOR GRAPHIC PRINTOUTS

2.3 GENERAL PARAMETERS

DEBUGGER

2.3.1 LOCATION
ORIGIN COORDINATES

2.3.2 TIME
ORIGINAL DATE OF TIME
ORIGINAL HOUR OF TIME

2.4 INTERNAL
CONCATENATE PARTEL OUTPUT
DICTIONARY
PARTITIONING TOOL
STEERING FILE
 38 Chapter 2. List of keywords classified according to type

2.5 NESTING WITH TOMAWAC

COORDINATES OF THE REFERENCE F SPECTRUM
INSTANT FOR READING TOMAWAC SPECTRUM
NESTING WITHIN TOMAWAC OUTER MODEL

2.5.1 INPUT
DATA
TOMAWAC LIQUID BOUNDARY FILE
TOMAWAC LIQUID BOUNDARY FILE FORMAT
TOMAWAC OUTER SPECTRAL FILE
TOMAWAC OUTER SPECTRAL FILE FORMAT

2.5.2 OUTPUT
RESULTS
TOMAWAC OUTER RESULT FILE
TOMAWAC OUTER RESULT FILE FORMAT

2.6 NUMERICAL PARAMETERS

MATRIX STORAGE
MATRIX-VECTOR PRODUCT
ZERO

2.6.1 DISSIPATION
DISSIPATION RELAXATION
MAXIMUM OF SUB-ITERATIONS
SUB-ITERATIONS ACCURACY FOR DISSIPATION

2.6.2 SOLVER INFO

MAXIMUM NUMBER OF ITERATIONS FOR SOLVER
PRECONDITIONING
SOLVER
SOLVER ACCURACY
SOLVER OPTION

2.7 PHYSICAL PARAMETERS

GRAVITY ACCELERATION
 2.7 PHYSICAL PARAMETERS 39

2.7.1 CURRENT INFO

CURRENT
SUB-ITERATIONS ACCURACY FOR CURRENT

2.7.2 DISSIPATION
BATHYMETRIC BREAKING
ALPHA
BREAKING
BREAKING LAW
GAMMAS
GDALLY
KDALLY

BOTTOM FRICTION
BOTTOM FRICTION LAW
DIAMETER50
DIAMETER90
FLUID KINEMATIC VISCOSITY
FLUID SPECIFIC MASS
FRICTION
FRICTION COEFFICIENT
FRICTION FACTOR
FRICTION FACTOR IMPOSED
HYDRAULIC REGIME IMPOSED
HYDRAULIC REGIME TYPE
RIPPLES COEFFICIENT
SEDIMENT SPECIFIC WEIGHT
SKIN ROUGHNESS ONLY

2.7.3 INITIALIZATION
INITIAL CONDITIONS
INITIAL DEPTH
INITIAL WATER LEVEL

2.7.4 VARYING TOPOGRAPHY

RAPIDLY VARYING TOPOGRAPHY
 3. Glossary

3.1 English/French glossary

ALPHA ALPHA
AMPLITUDE AND PHASE FILE FICHIER DES PHASES ET
AMPLITUDES
AMPLITUDE AND PHASE FILE FORMAT FORMAT DU FICHIER DES PHASES ET
AMPLITUDES
AUTOMATIC CALCULATION OF PHASE CALCUL AUTOMATIQUE DE LA PHASE
AUTOMATIC TETAP CALCULATION CALCUL AUTOMATIQUE DE TETAP
BEGINNING PERIOD FOR PERIOD PERIODE DE DEBUT POUR LE
SCANNING BALAYAGE EN PERIODE
BINARY DATA FILE 1 FICHIER DE DONNEES BINAIRE 1
BINARY DATA FILE 1 FORMAT FORMAT DU FICHIER DE DONNEES
BINAIRE 1
BINARY DATA FILE 2 FICHIER DE DONNEES BINAIRE 2
BINARY DATA FILE 2 FORMAT FORMAT DU FICHIER DE DONNEES
BINAIRE 2
BINARY RESULTS FILE FICHIER DES RESULTATS BINAIRE
BOTTOM FRICTION LAW FORMULATION DU FROTTEMENT DE
FOND
BOTTOM TOPOGRAPHY FILE FICHIER DES FONDS
BOTTOM TOPOGRAPHY SMOOTHING LISSAGES DU FOND
BOUNDARY CONDITIONS FILE FICHIER DES CONDITIONS AUX
LIMITES
BREAKING DEFERLEMENT
BREAKING LAW FORMULATION DU DEFERLEMENT
CHECKING THE MESH VERIFICATION DU MAILLAGE
CONCATENATE PARTEL OUTPUT CONCATENATION SORTIE PARTEL
COORDINATES OF THE REFERENCE F COORDONNEES POUR LE SPECTRE F
SPECTRUM DE REFERENCE
CURRENT COURANT
DEBUGGER DEBUGGER
DIAMETER50 DIAMETRE50
3.1 English/French glossary 41

DIAMETER90 DIAMETRE90
DICTIONARY DICTIONNAIRE
DIRECTION OF WAVE PROPAGATION DIRECTION DE PROPAGATION DE LA
HOULE
DISSIPATION RELAXATION RELAXATION SUR LA DISSIPATION
ENDING PERIOD FOR PERIOD PERIODE DE FIN POUR LE BALAYAGE
SCANNING EN PERIODE
FIRST TIME IN THE FREE SURFACE PREMIER TEMPS DANS LE FICHIER
FILE DE SURFACE LIBRE
FLUID KINEMATIC VISCOSITY VISCOSITE CINEMATIQUE DU FLUIDE
FLUID SPECIFIC MASS MASSE VOLUMIQUE DU FLUIDE
FORMATTED DATA FILE 1 FICHIER DE DONNEES FORMATE 1
FORMATTED DATA FILE 2 FICHIER DE DONNEES FORMATE 2
FORMATTED RESULTS FILE FICHIER DES RESULTATS FORMATE
FORTRAN FILE FICHIER FORTRAN
FREE SURFACE ANIMATION ANIMATION DE LA SURFACE LIBRE
FREE SURFACE FILE FICHIER DE SURFACE LIBRE
FREE SURFACE FILE FORMAT FORMAT DU FICHIER DE SURFACE
LIBRE
FRICTION FROTTEMENT
FRICTION COEFFICIENT COEFFICIENT DE FROTTEMENT
FRICTION FACTOR FACTEUR DE FROTTEMENT
FRICTION FACTOR IMPOSED FACTEUR DE FROTTEMENT IMPOSE
GAMMA GAMMA
GAMMAS GAMMAS
GDALLY GDALLY
GEOMETRY FILE FICHIER DE GEOMETRIE
GEOMETRY FILE FORMAT FORMAT DU FICHIER DE GEOMETRIE
GRAPHIC PRINTOUT PERIOD PERIODE DE SORTIE GRAPHIQUE
GRAVITY ACCELERATION ACCELERATION DE LA PESANTEUR
HYDRAULIC REGIME IMPOSED REGIME HYDRAULIQUE IMPOSE
HYDRAULIC REGIME TYPE TYPE DU REGIME HYDRAULIQUE
INFORMATIONS ABOUT SOLVER INFORMATIONS SUR LE SOLVEUR
INITIAL CONDITIONS CONDITIONS INITIALES
INITIAL DEPTH HAUTEUR INITIALE
INITIAL WATER LEVEL COTE INITIALE
INSTANT FOR READING TOMAWAC INSTANT DE LECTURE DU SPECTRE
SPECTRUM TOMAWAC
KDALLY KDALLY
LISTING PRINTOUT SORTIE LISTING
LISTING PRINTOUT PERIOD PERIODE DE SORTIE LISTING
MATRIX STORAGE STOCKAGE DES MATRICES
MATRIX-VECTOR PRODUCT PRODUIT MATRICE-VECTEUR
MAXIMUM ANGLE OF PROPAGATION ANGLE MAXIMUM DE PROPAGATION
MAXIMUM NUMBER OF ITERATIONS MAXIMUM D’ITERATIONS POUR LE
FOR SOLVER SOLVEUR
MAXIMUM OF SUB-ITERATIONS MAXIMUM DE SOUS-ITERATIONS
42 Chapter 3. Glossary

MAXIMUM OF SUB-ITERATIONS FOR MAXIMUM DE SOUS-ITERATIONS POUR

TETAP TETAP
MAXIMUM SPECTRAL PERIOD PERIODE MAXIMUM DU SPECTRE
MINIMUM ANGLE OF PROPAGATION ANGLE MINIMUM DE PROPAGATION
MINIMUM SPECTRAL PERIOD PERIODE MINIMUM DU SPECTRE
MONODIRECTIONAL RANDOM WAVE HOULE ALEATOIRE
MONODIRECTIONNELLE
MULTIDIRECTIONAL RANDOM WAVE HOULE ALEATOIRE
MULTIDIRECTIONNELLE
NESTING WITHIN TOMAWAC OUTER CHAINAGE AVEC MODELE GLOBAL
MODEL TOMAWAC
NUMBER OF DIRECTIONS NOMBRE DE DIRECTIONS DE
DISCRETISATION
NUMBER OF PERIODS NOMBRE DE PERIODES DE
DISCRETISATION
NUMBER OF PRIVATE VARIABLES NOMBRE DE VARIABLES PRIVEES
NUMBER OF TIME STEPS NOMBRE DE PAS DE TEMPS
ORIGIN COORDINATES COORDONNEES DE L’ORIGINE
ORIGINAL DATE OF TIME DATE DE L’ORIGINE DES TEMPS
ORIGINAL HOUR OF TIME HEURE DE L’ORIGINE DES TEMPS
PARALLEL PROCESSORS PROCESSEURS PARALLELES
PARTITIONING TOOL PARTITIONNEUR
PEAK PERIOD PERIODE DE PIC
PERIOD SCANNING BALAYAGE EN PERIODE
PHASE REFERENCE COORDINATES COORDONNEES DE REFERENCE POUR
LA PHASE
PRECONDITIONING PRECONDITIONNEMENT
RAPIDLY VARYING TOPOGRAPHY VARIATION RAPIDE DE LA
BATHYMETRIE
REFERENCE FILE FICHIER DE REFERENCE
REFERENCE FILE FORMAT FORMAT DU FICHIER DE REFERENCE
REFERENCE WATER DEPTH FOR PROFONDEUR DE REFERENCE POUR LA
AUTOMATIC PHASE PHASE AUTOMATIQUE
RELAXATION ON TETAP RELAXATION SUR TETAP
RESULTS FILE FICHIER DES RESULTATS
RESULTS FILE FORMAT FORMAT DU FICHIER DE RESULTATS
RIPPLES COEFFICIENT COEFFICIENT DE RIDES
S EXPONENT EXPOSANT S
SEDIMENT SPECIFIC WEIGHT MASSE VOLUMIQUE DU SEDIMENT
SKIN ROUGHNESS ONLY RUGOSITE DE PEAU SEULE
SOLVER SOLVEUR
SOLVER ACCURACY PRECISION DU SOLVEUR
SOLVER OPTION OPTION DU SOLVEUR
STEERING FILE FICHIER DES PARAMETRES
STEP FOR PERIOD SCANNING PAS POUR LE BALAYAGE EN PERIODE
SUB-ITERATIONS ACCURACY FOR PRECISION SUR LES
CURRENT SOUS-ITERATIONS POUR COURANT
 3.2 French/English glossary 43

SUB-ITERATIONS ACCURACY FOR PRECISION SUR LES

DISSIPATION SOUS-ITERATIONS POUR LA
DISSIPATION
SUB-ITERATIONS ACCURACY FOR PRECISION SUR LES
TETAP SOUS-ITERATIONS POUR TETAP
TIME STEP PAS DE TEMPS
TITLE TITRE
TOMAWAC LIQUID BOUNDARY FILE FICHIER DE FRONTIERES LIQUIDES
TOMAWAC
TOMAWAC LIQUID BOUNDARY FILE FORMAT DU FICHIER DE FRONTIERES
FORMAT LIQUIDES TOMAWAC
TOMAWAC OUTER RESULT FILE FICHIER DE RESULTATS GLOBAL
TOMAWAC
TOMAWAC OUTER RESULT FILE FORMAT DU FICHIER DE RESULTATS
FORMAT GLOBAL TOMAWAC
TOMAWAC OUTER SPECTRAL FILE FICHIER DE SPECTRE GLOBAL
TOMAWAC
TOMAWAC OUTER SPECTRAL FILE FORMAT DU FICHIER DE SPECTRE
FORMAT GLOBAL TOMAWAC
VALIDATION VALIDATION
VARIABLES FOR GRAPHIC PRINTOUTS VARIABLES POUR LES SORTIES
GRAPHIQUES
VARIABLES TO BE PRINTED VARIABLES A IMPRIMER
VECTOR LENGTH LONGUEUR DU VECTEUR
WAVE HEIGHTS SMOOTHING LISSAGE DES HAUTEURS DE HOULE
WAVE PERIOD PERIODE DE LA HOULE
ZERO ZERO

3.2 French/English glossary

ACCELERATION DE LA PESANTEUR GRAVITY ACCELERATION

ALPHA ALPHA
ANGLE MAXIMUM DE PROPAGATION MAXIMUM ANGLE OF PROPAGATION
ANGLE MINIMUM DE PROPAGATION MINIMUM ANGLE OF PROPAGATION
ANIMATION DE LA SURFACE LIBRE FREE SURFACE ANIMATION
BALAYAGE EN PERIODE PERIOD SCANNING
CALCUL AUTOMATIQUE DE LA PHASE AUTOMATIC CALCULATION OF PHASE
CALCUL AUTOMATIQUE DE TETAP AUTOMATIC TETAP CALCULATION
CHAINAGE AVEC MODELE GLOBAL NESTING WITHIN TOMAWAC OUTER
TOMAWAC MODEL
COEFFICIENT DE FROTTEMENT FRICTION COEFFICIENT
COEFFICIENT DE RIDES RIPPLES COEFFICIENT
CONCATENATION SORTIE PARTEL CONCATENATE PARTEL OUTPUT
CONDITIONS INITIALES INITIAL CONDITIONS
COORDONNEES DE L’ORIGINE ORIGIN COORDINATES
COORDONNEES DE REFERENCE POUR PHASE REFERENCE COORDINATES
LA PHASE
44 Chapter 3. Glossary

COORDONNEES POUR LE SPECTRE F COORDINATES OF THE REFERENCE F

DE REFERENCE SPECTRUM
COTE INITIALE INITIAL WATER LEVEL
COURANT CURRENT
DATE DE L’ORIGINE DES TEMPS ORIGINAL DATE OF TIME
DEBUGGER DEBUGGER
DEFERLEMENT BREAKING
DIAMETRE50 DIAMETER50
DIAMETRE90 DIAMETER90
DICTIONNAIRE DICTIONARY
DIRECTION DE PROPAGATION DE LA DIRECTION OF WAVE PROPAGATION
HOULE
EXPOSANT S S EXPONENT
FACTEUR DE FROTTEMENT FRICTION FACTOR
FACTEUR DE FROTTEMENT IMPOSE FRICTION FACTOR IMPOSED
FICHIER DE DONNEES BINAIRE 1 BINARY DATA FILE 1
FICHIER DE DONNEES BINAIRE 2 BINARY DATA FILE 2
FICHIER DE DONNEES FORMATE 1 FORMATTED DATA FILE 1
FICHIER DE DONNEES FORMATE 2 FORMATTED DATA FILE 2
FICHIER DE FRONTIERES LIQUIDES TOMAWAC LIQUID BOUNDARY FILE
TOMAWAC
FICHIER DE GEOMETRIE GEOMETRY FILE
FICHIER DE REFERENCE REFERENCE FILE
FICHIER DE RESULTATS GLOBAL TOMAWAC OUTER RESULT FILE
TOMAWAC
FICHIER DE SPECTRE GLOBAL TOMAWAC OUTER SPECTRAL FILE
TOMAWAC
FICHIER DE SURFACE LIBRE FREE SURFACE FILE
FICHIER DES CONDITIONS AUX BOUNDARY CONDITIONS FILE
LIMITES
FICHIER DES FONDS BOTTOM TOPOGRAPHY FILE
FICHIER DES PARAMETRES STEERING FILE
FICHIER DES PHASES ET AMPLITUDE AND PHASE FILE
AMPLITUDES
FICHIER DES RESULTATS RESULTS FILE
FICHIER DES RESULTATS BINAIRE BINARY RESULTS FILE
FICHIER DES RESULTATS FORMATE FORMATTED RESULTS FILE
FICHIER FORTRAN FORTRAN FILE
FORMAT DU FICHIER DE DONNEES BINARY DATA FILE 1 FORMAT
BINAIRE 1
FORMAT DU FICHIER DE DONNEES BINARY DATA FILE 2 FORMAT
BINAIRE 2
FORMAT DU FICHIER DE FRONTIERES TOMAWAC LIQUID BOUNDARY FILE
LIQUIDES TOMAWAC FORMAT
FORMAT DU FICHIER DE GEOMETRIE GEOMETRY FILE FORMAT
FORMAT DU FICHIER DE REFERENCE REFERENCE FILE FORMAT
FORMAT DU FICHIER DE RESULTATS RESULTS FILE FORMAT
3.2 French/English glossary 45

FORMAT DU FICHIER DE RESULTATS TOMAWAC OUTER RESULT FILE

GLOBAL TOMAWAC FORMAT
FORMAT DU FICHIER DE SPECTRE TOMAWAC OUTER SPECTRAL FILE
GLOBAL TOMAWAC FORMAT
FORMAT DU FICHIER DE SURFACE FREE SURFACE FILE FORMAT
LIBRE
FORMAT DU FICHIER DES PHASES ET AMPLITUDE AND PHASE FILE FORMAT
AMPLITUDES
FORMULATION DU DEFERLEMENT BREAKING LAW
FORMULATION DU FROTTEMENT DE BOTTOM FRICTION LAW
FOND
FROTTEMENT FRICTION
GAMMA GAMMA
GAMMAS GAMMAS
GDALLY GDALLY
HAUTEUR INITIALE INITIAL DEPTH
HEURE DE L’ORIGINE DES TEMPS ORIGINAL HOUR OF TIME
HOULE ALEATOIRE MONODIRECTIONAL RANDOM WAVE
MONODIRECTIONNELLE
HOULE ALEATOIRE MULTIDIRECTIONAL RANDOM WAVE
MULTIDIRECTIONNELLE
INFORMATIONS SUR LE SOLVEUR INFORMATIONS ABOUT SOLVER
INSTANT DE LECTURE DU SPECTRE INSTANT FOR READING TOMAWAC
TOMAWAC SPECTRUM
KDALLY KDALLY
LISSAGE DES HAUTEURS DE HOULE WAVE HEIGHTS SMOOTHING
LISSAGES DU FOND BOTTOM TOPOGRAPHY SMOOTHING
LONGUEUR DU VECTEUR VECTOR LENGTH
MASSE VOLUMIQUE DU FLUIDE FLUID SPECIFIC MASS
MASSE VOLUMIQUE DU SEDIMENT SEDIMENT SPECIFIC WEIGHT
MAXIMUM D’ITERATIONS POUR LE MAXIMUM NUMBER OF ITERATIONS
SOLVEUR FOR SOLVER
MAXIMUM DE SOUS-ITERATIONS MAXIMUM OF SUB-ITERATIONS
MAXIMUM DE SOUS-ITERATIONS POUR MAXIMUM OF SUB-ITERATIONS FOR
TETAP TETAP
NOMBRE DE DIRECTIONS DE NUMBER OF DIRECTIONS
DISCRETISATION
NOMBRE DE PAS DE TEMPS NUMBER OF TIME STEPS
NOMBRE DE PERIODES DE NUMBER OF PERIODS
DISCRETISATION
NOMBRE DE VARIABLES PRIVEES NUMBER OF PRIVATE VARIABLES
OPTION DU SOLVEUR SOLVER OPTION
PARTITIONNEUR PARTITIONING TOOL
PAS DE TEMPS TIME STEP
PAS POUR LE BALAYAGE EN PERIODE STEP FOR PERIOD SCANNING
PERIODE DE DEBUT POUR LE BEGINNING PERIOD FOR PERIOD
BALAYAGE EN PERIODE SCANNING
46 Bibliography

PERIODE DE FIN POUR LE BALAYAGE ENDING PERIOD FOR PERIOD

EN PERIODE SCANNING
PERIODE DE LA HOULE WAVE PERIOD
PERIODE DE PIC PEAK PERIOD
PERIODE DE SORTIE GRAPHIQUE GRAPHIC PRINTOUT PERIOD
PERIODE DE SORTIE LISTING LISTING PRINTOUT PERIOD
PERIODE MAXIMUM DU SPECTRE MAXIMUM SPECTRAL PERIOD
PERIODE MINIMUM DU SPECTRE MINIMUM SPECTRAL PERIOD
PRECISION DU SOLVEUR SOLVER ACCURACY
PRECISION SUR LES SUB-ITERATIONS ACCURACY FOR
SOUS-ITERATIONS POUR COURANT CURRENT
PRECISION SUR LES SUB-ITERATIONS ACCURACY FOR
SOUS-ITERATIONS POUR LA DISSIPATION
DISSIPATION
PRECISION SUR LES SUB-ITERATIONS ACCURACY FOR
SOUS-ITERATIONS POUR TETAP TETAP
PRECONDITIONNEMENT PRECONDITIONING
PREMIER TEMPS DANS LE FICHIER FIRST TIME IN THE FREE SURFACE
DE SURFACE LIBRE FILE
PROCESSEURS PARALLELES PARALLEL PROCESSORS
PRODUIT MATRICE-VECTEUR MATRIX-VECTOR PRODUCT
PROFONDEUR DE REFERENCE POUR LA REFERENCE WATER DEPTH FOR
PHASE AUTOMATIQUE AUTOMATIC PHASE
REGIME HYDRAULIQUE IMPOSE HYDRAULIC REGIME IMPOSED
RELAXATION SUR LA DISSIPATION DISSIPATION RELAXATION
RELAXATION SUR TETAP RELAXATION ON TETAP
RUGOSITE DE PEAU SEULE SKIN ROUGHNESS ONLY
SOLVEUR SOLVER
SORTIE LISTING LISTING PRINTOUT
STOCKAGE DES MATRICES MATRIX STORAGE
TITRE TITLE
TYPE DU REGIME HYDRAULIQUE HYDRAULIC REGIME TYPE
VALIDATION VALIDATION
VARIABLES A IMPRIMER VARIABLES TO BE PRINTED
VARIABLES POUR LES SORTIES VARIABLES FOR GRAPHIC PRINTOUTS
GRAPHIQUES
VARIATION RAPIDE DE LA RAPIDLY VARYING TOPOGRAPHY
BATHYMETRIE
VERIFICATION DU MAILLAGE CHECKING THE MESH
VISCOSITE CINEMATIQUE DU FLUIDE FLUID KINEMATIC VISCOSITY
ZERO ZERO

[1]
[1] J-M. HERVOUET. Hydrodynamics of free surface flows. Modelling with the finite element
method. John Wiley & Sons, Ltd, Paris, 2007.