Good Defn Routers, Switch, Ssid

https://www.cloudflare.
com/en-gb/learning/network-layer/what-is-a-router/
What is a router?
A router is a device that connects two or more packet-switched networks or
subnetworks. It serves two primary functions: managing traffic between these
networks by forwarding data packets to their intended IP addresses, and allowing
multiple devices to use the same Internet connection.
There are several types of routers, but most routers pass data between LANs (local
area networks) and WANs (wide area networks). A LAN is a group of connected
devices restricted to a specific geographic area. A LAN usually requires a single
router.
A WAN, by contrast, is a large network spread out over a vast geographic area. Large
organizations and companies that operate in multiple locations across the country,
for instance, will need separate LANs for each location, which then connect to the
other LANs to form a WAN. Because a WAN is distributed over a large area, it often
necessitates multiple routers and switches*.
*A network switch forwards data packets between groups of devices in the same
network, whereas a router forwards data between different networks.
How does a router work?

Think of a router as an air traffic controller and data packets as aircraft headed to
different airports (or networks). Just as each plane has a unique destination and
follows a unique route, each packet needs to be guided to its destination as
efficiently as possible. In the same way that an air traffic controller ensures that
planes reach their destinations without getting lost or suffering a major disruption
along the way, a router helps direct data packets to their destination IP address.
In order to direct packets effectively, a router uses an internal routing table — a list
of paths to various network destinations. The router reads a packet's header to
determine where it is going, then consults the routing table to figure out the most
efficient path to that destination. It then forwards the packet to the next network in
the path.
To learn more about IP routing and the protocols that are used during this process,
read What is routing?
Log in
What is a router?
A router is a device that connects two or more IP networks or subnetworks.
Networking basics
Copy article link
What is a router?
A router is a device that connects two or more packet-switched networks or
subnetworks. It serves two primary functions: managing traffic between these
networks by forwarding data packets to their intended IP addresses, and allowing
multiple devices to use the same Internet connection.
There are several types of routers, but most routers pass data between LANs (local
area networks) and WANs (wide area networks). A LAN is a group of connected
devices restricted to a specific geographic area. A LAN usually requires a single
router.
A WAN, by contrast, is a large network spread out over a vast geographic area. Large
organizations and companies that operate in multiple locations across the country,
for instance, will need separate LANs for each location, which then connect to the
other LANs to form a WAN. Because a WAN is distributed over a large area, it often
necessitates multiple routers and switches*.
*A network switch forwards data packets between groups of devices in the same
network, whereas a router forwards data between different networks.
Free tools
Protect your internet for free with 1.1.1.1

Get the app
Talk to an expert
Learn how Cloudflare can protect your business

Contact sales
How does a router work?
Think of a router as an air traffic controller and data packets as aircraft headed to
different airports (or networks). Just as each plane has a unique destination and
follows a unique route, each packet needs to be guided to its destination as
efficiently as possible. In the same way that an air traffic controller ensures that
planes reach their destinations without getting lost or suffering a major disruption
along the way, a router helps direct data packets to their destination IP address.
In order to direct packets effectively, a router uses an internal routing table — a list
of paths to various network destinations. The router reads a packet's header to
determine where it is going, then consults the routing table to figure out the most
efficient path to that destination. It then forwards the packet to the next network in
the path.
To learn more about IP routing and the protocols that are used during this process,
read What is routing?
What is the difference between a router

and a modem?
Although some Internet service providers (ISPs) may combine a router and a modem
within a single device, they are not the same. Each plays a different but equally
important role in connecting networks to each other and to the Internet.
A router forms networks and manages the flow of data within and between those
networks, while a modem connects those networks to the Internet. Modems forge a
connection to the Internet by converting signals from an ISP into a digital signal that
can be interpreted by any connected device. A single device may plug into a modem
in order to connect to the Internet; alternately, a router can help distribute this signal
to multiple devices within an established network, allowing all of them to connect to
the Internet simultaneously.
Think of it like this: If Bob has a router, but no modem, he will be able to create a
LAN and send data between the devices on that network. However, he will not be
able to connect that network to the Internet. Alice, on the other hand, has a modem,
but no router. She will be able to connect a single device to the Internet (for
example, her work laptop), but cannot distribute that Internet connection to multiple
devices (say, her laptop and her smartphone). Carol, meanwhile, has a router and a
modem. Using both devices, she can form a LAN with her desktop computer, tablet,
and smartphone and connect them all to the Internet at the same time.
What are the different types of routers?

In order to connect a LAN to the Internet, a router first needs to communicate with a
modem. There are two primary ways to do this:
 Wireless router: A wireless router uses an Ethernet cable to connect to a modem.
It distributes data by converting packets from binary code into radio signals, then
wirelessly broadcasts them using antennae. Wireless routers do not establish
LANs; instead, they create WLANs (wireless local area networks), which connect
multiple devices using wireless communication.
 Wired router: Like a wireless router, a wired router also uses an Ethernet cable to
connect to a modem. It then uses separate cables to connect to one or more
devices within the network, create a LAN, and link the devices within that network
to the Internet.
In addition to wireless and wired routers for small LANs, there are many specialized
types of routers that serve specific functions:
 Core router: Unlike the routers used within a home or small business LAN, a core
router is used by large corporations and businesses that transmit a high volume
of data packets within their network. Core routers operate at the "core" of a
network and do not communicate with external networks.
 Edge router: While a core router exclusively manages data traffic within a large-
scale network, an edge router communicates with both core routers and external
networks. Edge routers live at the "edge" of a network and use the BGP (Border
Gateway Protocol) to send and receive data from other LANs and WANs.
 Virtual router: A virtual router is a software application that performs the same
function as a standard hardware router. It may use the Virtual Router Redundancy
Protocol (VRRP) to establish primary and backup virtual routers, should one fail.
What is an SSID?
SSID stands for "service set identifier," and it is the technical term for the name of the
network that WLAN routers broadcast. SSIDs enable users to find and connect to the
wireless network broadcast by the router (a properly secured router should require
password entry as well). Consumer routers for WiFi networks usually have their
factory-default SSID printed on the side or bottom.
What are some of the security challenges

associated with routers?
Vulnerability exploits: All hardware-based routers come with automatically installed
software known as firmware that helps the router perform its functions. Like any
other piece of software, router firmware often contains vulnerabilities that cyber
attackers can exploit (one example), and router vendors periodically issue updates to
patch these vulnerabilities. For this reason, router firmware needs to be updated
regularly. Unpatched routers can be compromised by attackers, enabling them to
monitor traffic or use the router as part of a botnet.
DDoS attacks: Small and large organizations often are the targets of distributed
denial-of-service (DDoS) attacks directed at their network infrastructure.
Unmitigated network layer DDoS attacks can overwhelm routers or cause them to
crash, resulting in network downtime. Cloudflare Magic Transit is one solution for
protecting routers and networks from these kinds of DDoS attacks.
Administrative credentials: All routers come with a set of admin credentials for
performing administrative functions. These credentials are set to default values, such
as "admin" as the username and "admin" as the password. The username and
password should be reset to something more secure as soon as possible: attackers
are aware of the common default values for these credentials and can use them to
gain control of the router remotely if they are not reset.

Good Defn Routers, Switch, Ssid

Uploaded by

Copyright:

Available Formats

Good Defn Routers, Switch, Ssid

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Good Defn Routers, Switch, Ssid

Uploaded by

Copyright:

Available Formats

https://www.cloudflare.

How does a router work?

Copy article link

Protect your internet for free with 1.1.1.1

Learn how Cloudflare can protect your business

What is the difference between a router

What are the different types of routers?

What are some of the security challenges

You might also like