01 EasyIOeu SH-SystemView7 Configuration v1.3

EasyIOeu SH-SystemView7 Configuration
EasyIOeu SH-SystemView7 Configuration v1.3
1
Document Change Log
30th Jun 2015

Document created.
4th Aug 2015

Updated some info.
12th Jan 2016

Updated info about SystemView app.
31th Aug 2016

Clarify info about SystemView app.
2
Table of Contents
Introduction ........................................................................................................................................... 4
Specifications ......................................................................................................................................... 5
Dimension .............................................................................................................................................. 6
Physical Installation Instructions ............................................................................................................ 7
Ethernet/Date & time ............................................................................................................................ 9
SystemView .......................................................................................................................................... 10
Technical Support ................................................................................................................................. 11
3
Introduction
Thank you for purchasing EasyIO products.
This user guide will help you to configure SystemView7 in a fast and efficient manner.
This device is based on Android OS and so there are several settings that device is expecting to get
from the network in order to work properly.
Date & Time
IP Address
If you are using the device without connection to Internet / DHCP Router make sure you setup this
properties correctly in order to get the device working correct.
As Android device it pickup the date and time from the Internet on every power up.
4
Specifications
Model: SystemView7
Solution: Allwinner Dual-Core Cortex™-A7 CPU
CPU: ARM Cortex A7 Dual-Core, 1.2Ghz
7 Inch IPS Display, Resolution:1024 x 600,
Hardware Specs Display:
Brightness: 350 cd/m2
RAM: 1GB
Nand Flash: 4GB
System: Google Android 4.2.2
H.264 2160p video decoding,
Multi-format FHD video decoding, including
Mpeg1/2, Mpeg4 SP/ASP GMC, H.263, H.264,
VP6/8, AVS jizun, Jpeg/Mjpeg,etc.
H.264 High Profile 1080p@30fps or 720@60fps
Video:
encoding
Software Feature 3840 x 1080@30fps 3D decoding, BD/SBS/TAB/FP
supported
Complies with RTSP, HTTP, HLS, RTMP, MMS
streaming media protocols
Integrated 3W Amplifier (No Speakers, Only
Audio:
Speaker connector)
Language: Support multi-languages
Ethernet Interface (RJ45)
HDMI Out
USB Socket
Interfaces Back:
CVBS IN
DC IN Power Terminal (9V~30V)
UART, IO, 3W AMP OUT Available
BLUETOOTH Bluetooth v2.1+EDR/Bluetooth 3.0/3.0+HS/4.0
Network WIFI WIFI (802.11b/g/n)
LAN Port Ethernet RJ45
Power Supply: 9~24VDC (at least 1A for 12V)
Power Supply:
Accessories Consumption: 3~8W
Mounting: Integrated Bracket For Flush Mounting
5
Dimension
6
Physical Installation Instructions

Step 1
Make the cutout for the tablet.
Step 2
Install the mounting bracket into the cutout and secure it.
7
Step 3
Install the tablet and plug all cables on back.
Step 4
Secure the touchscreen to the mounting bracket using the provided screws.
8
Ethernet/Date & time

To connect the tablet to some device by Ethernet you need to configure the Ethernet network.
Go to Settings->More…->Ethernet, enable Use Ethernet and if you connect directly to web server
device open Advanced Configure:
• Disable DHCP;
• Set the IP Address of your SystemView7;
• Set the Mask Address of your network (normally 255.255.255.0);
• Set the GateWay as the IP Address of your web server.
To have your tablet showing the graphics in the right time you need to make sure you have the date
and time updated.
Disable Automatic time zone and Select time zone of your zone. If the tablet is not connected to
internet disable Automatic date & time, so Set date and Set time.
9
SystemView
This app was made to keep the web page opened and exit only through password.
SystemView app will open on boot and even the tablet reboot it will open automatically.
To configure this app you just need to set the IP of your device and first time you reboot the tablet
you need to set to open this app always on boot. This app will disable the screen after 15 minutes, to
enable again just touch on the screen.
How to exit from SystemView

To exit from SystemView you need to do long press on bottom right of the screen and it will show a
password box, the password is 345710, it will open automatically the settings after exit SystemView.
How to change the IP on SystemView

To change the IP on SystemView you need to exit from SystemView (step above), then you need to
go to Settings->Apps->SystemView and click on Clear Data.
How to exit from Settings

To exit from Settings you need to go to Settings>Apps>RUNNING (after open Apps click on “ON SD
CARD” or just slide to left and you can see “RUNNING” so click there or just slide again).
When you are at Running Apps you can see Settings so click on it and then stop the service.
Doing this you are stopping the Settings and then it will open the SystemView (if you were there
before).
How to install a new SystemView version

To install a new version of SystemView first go to Settings->Apps and click on SystemView then
Uninstall. After this you need to connect an USB stick with the latest app and go to Menu->File
Manager->USB->usbhost1 and click on latest SystemView apk file, do install and after the installation
is done you need to reboot the tablet.
To get the latest software contact technical support.

10
Technical Support
For technical issue, please contact
Email:support@easyio.eu
11

01 EasyIOeu SH-SystemView7 Configuration v1.3

Uploaded by

Copyright:

Available Formats

01 EasyIOeu SH-SystemView7 Configuration v1.3

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

01 EasyIOeu SH-SystemView7 Configuration v1.3

Uploaded by

Copyright:

Available Formats

EasyIOeu SH-SystemView7 Configuration

EasyIOeu SH-SystemView7 Configuration v1.3

Document Change Log

30th Jun 2015

4th Aug 2015

12th Jan 2016

31th Aug 2016

Physical Installation Instructions

Ethernet/Date & time

How to exit from SystemView

How to change the IP on SystemView

How to exit from Settings

How to install a new SystemView version

To get the latest software contact technical support.

For technical issue, please contact

You might also like