Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Isonem MD28

    Uploaded by

    Gobi Nava
    MD 28 is a two-component, acrylic-modified cementitious coating that provides waterproofing and resurfacing of concrete, masonry, and other construction materials. It has high flexibility, fills cracks, and adheres well to surfaces. The product is resistant to weathering, UV light, and mechanical impacts. It can be used for waterproofing foundations, balconies, pools, and other wet areas. MD 28 has excellent adhesion, is flexible and waterproof up to 7 bars of pressure, and allows surfaces to breathe while repelling water. It is composed of cement, sand, acrylic copolymers and additives.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Isonem MD28

    Uploaded by

    Gobi Nava
    18 views1 page
    MD 28 is a two-component, acrylic-modified cementitious coating that provides waterproofing and resurfacing of concrete, masonry, and other construction materials. It has high flexibility, fills cracks, and adheres well to surfaces. The product is resistant to weathering, UV light, and mechanical impacts. It can be used for waterproofing foundations, balconies, pools, and other wet areas. MD 28 has excellent adhesion, is flexible and waterproof up to 7 bars of pressure, and allows surfaces to breathe while repelling water. It is composed of cement, sand, acrylic copolymers and additives.

    Original Title

    ISONEM-MD28

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MD 28 is a two-component, acrylic-modified cementitious coating that provides waterproofing and resurfacing of concrete, masonry, and other construction materials. It has high flexibility, fills cracks, and adheres well to surfaces. The product is resistant to weathering, UV light, and mechanical impacts. It can be used for waterproofing foundations, balconies, pools, and other wet areas. MD 28 has excellent adhesion, is flexible and waterproof up to 7 bars of pressure, and allows surfaces to breathe while repelling water. It is composed of cement, sand, acrylic copolymers and additives.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views1 page

    Isonem MD28

    Uploaded by

    Gobi Nava
    MD 28 is a two-component, acrylic-modified cementitious coating that provides waterproofing and resurfacing of concrete, masonry, and other construction materials. It has high flexibility, fills cracks, and adheres well to surfaces. The product is resistant to weathering, UV light, and mechanical impacts. It can be used for waterproofing foundations, balconies, pools, and other wet areas. MD 28 has excellent adhesion, is flexible and waterproof up to 7 bars of pressure, and allows surfaces to breathe while repelling water. It is composed of cement, sand, acrylic copolymers and additives.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MD 28

    Flexible Waterproofing Compund P. Code: 013

    ISONEM MD 28 is cement based, is a two component acrylic modified Cementitious coating that requires only on site mixing to form the ideal
    product to waterproof and resurface concrete, masonry, and most other construction materials. The product has high flexibility and ability to fill
    the capillary and concreting cracks on the surface. The product has high adherence and features an excellent adhesive on concrete plaster, alum
    etc. The product presents a good resistance against the weather conditions, UV lights and mechanic impacts and abrasion.
    USING AREAS: •Positive side insulations of the wall and grounds, •Insulations on the concrete, plaster and alum applications, •Balcony, terrace,
    swimming pools, •Wet areas, shower and baths, for fixing tiles in water retaining structures. •Pre-cast and pre-fabricated elements, roofs, •To
    reface in concrete surfaces. •As a waterproof lining for water retaining structures. •For coating seawater channels. •For wat erproofing &
    protection against brackish water. •To provide foundation protection. •To provide protection to concrete surfaces from carbonation and chloride
    attack. •For use on pedestrian walkways in marine areas.
    FEATURES AND BENEFITS: •A 1mm coating provides anti carbonation cover equivalent to over 80 cm of concrete. •Waterproof-resists up to 7
    Bars (70 meter head) of pressure. •Excellent adhesion. Bonds to porous and non-porous surfaces. •Flexible. •Non toxic-ideal for contact with
    potable water. •Breathable - whilst repelling water, allows substrate to breathe. •High resistance to carbon dioxide and chloride ion diffusion.
    TECHNICAL PROPERTIES: •Composition: ISONEM MD 28 is composed of specially selected cements, silica sand and reactive fillers supplied in
    powder form together with a liquid component of blended acrylic copolymers and special additives. •Density: 1,65 gr/ml •Toxicity: Very Low
    Toxicity •% •Flexible: Can stand moderate movements of hairline cracks. Crack bridging up to 0.3 mm crack width •PH (Liquid Component): 7
    - 10 •Initial surface absorption: >95% reduction against control •Water Absorption: <%2 (TS 7847) •Adhesion Strength: Min 3 kgf/cm
    2

    APPLICATION:
    SURFACE PREPARATION: The surface to be applied on should be certainly clean and moist, If the surface is dry, it should be moistened providing no
    accumulation. The oil, dust, rust or the factors reducing the adherence should be eliminated. If any adherence problem is observed or uneven
    surfaces are mentioned, ISONEM D10 adhesive should be used as an undercoating layer before the application, if any points requiring repair
    works, segregations or any gaps, they should be repaired with ISONEM 03 Elastic Mortar. Such present dilatations should be filled up with
    ISONEM A4 elastic filler before the application of ISONEM MD 28. Then ISONEM MD 28 mixture should be prepared.
    PREPARATION OF THE MIXTURE & APPLICATION: ISONEM MD 28 is supplied in premeasured units and should be mixed on site in clean
    containers. Slowly add the powder to the liquid and mix, using a slow speed drill fitted with a suitable paddle. The mixing process takes 5
    minutes for homogenous structure. MIX AND USE. Do not mix more material than can be used in one hour. ISONEM MD 28 is applied in two
    layers with the recoating intervals of 4 hours per layer. The product should be applied with a brush smoothly in the directions perpendicular to
    each others. 24 hours should not be exceeded to apply each layer. The application should not be made at high temperatures or frost so the
    morning hours or the evening times should be preferred. It is recommended, for general resurfacing, that each coat should be a minimum of 1mm
    thick.
    2
    CONSUMPTION: 2 kg/m (at 2 layers)
    PACKAGE: 10 kg liquid barrel + 20 kg powder craft bag: 30 kg set
    STORAGE: 12 months in cold and dry places
    HEALTH AND SAFETY: For full information on Health and Safety matters regarding this product the relevant Health and Safety Data Sheet should
    be consulted.

    EGE
    ISP
    INTERNATIONAL SPECIALTY PRODUCTS

    The information contained in this leaflet has been prepared to our best knowledge, and in consistency with the results of our experiments and experience, and are the products of our know-how based on our accumulation of decades. However, the application of our products accurately and
    successfully, is entirely beyond our control and responsibility. Therefore, the scope of our liability is limited to the quality of our products and this technical leaflet supercedes all the previous technical leaflets and all the explanations and the information contained in the product labels.

    You might also like