ELECTRONIC HEAT DETECTOR

TMP2
FEATURES
- Interactive
- To be used in industrial hazardous areas
- Protective PCB coating
- Short circuit isolator
- Conforms to EMC directive
- Immune to electromagnetic disturbance
- High reliability due to Self-diagnosis procedure
- Programmable LED for status indication
- Two wires technology
- Low power consumption
- Temperature set-point levels from -20°C up to 110°C.
- Configurable classes A1, A2, B, C, D
- Different output configurations. Static and/or Rate of Rise
- Proven technology
- Not influenced by dust, humidity, exhaust gases.
- EN54-5 CPR Certified
- Tested with internal climatic tunnel on production line
- shock and vibration resistant

APPLICATIONS
CESI 03 ATEX 042 0068-CPR-009/2014 - Commercial and Industrial plants
- Hazardous atmospheres (Classified areas Zone 1 and Zone 2)
TECHNICAL SPECIFICATIONS - Suitable in dangerous environmental conditions such as in
Sensor Semi-conductor presence of corrosive elements or condensing steams
Temperature Range -20°C to +110°C - Suitabe to be used with all Conventional Fire Detection Systems
Code of Protection ATEX II 2G Ex d IIC T6 Especially suitable for:
Protection Degree IP66 (Probe IP67) - Refineries and Hazardous material stores
Location Hazardous area - Extraction ducts
Short-term repeatability ±2% FSD 60 min. - Boiler rooms
Long-term repeatability ±3% FSD 3 months. - Workshops
Accuracy (linearity) ±1% FSD - Oil & Gas plants
- Pumping rooms
Environmental Specifications - Refrigeration cells
EMC According EN61000-4
Storage temperature -40 to 85 °C - Certificate ATEX II 2G Ex d IIC T6
Operating temperature -20 to 110 °C - Certificate EN54-5 CPR
Humidity range 90% R.H. n.c.

Electrical Specifications
Supply Voltage 10-30 Vdc
Supply current about 20/30 uA in normal conditions
Supply current in alarm 11mA ±3mA @ 13,7 Vdc
12mA ±3mA @ 24 Vdc “TMP2-Config”: NEW diagnostic
Supply fuse 50 mA and configuration software for:
Connection 2 conductors cable
- Monitoring of sensors and detector
Mechanical Specifications
functions
Overall dimensions ATEX version: 160x85x75 mm
DUST version: 203x95x60 mm - Alarm Temperature Levels setting
Weight: ATEX version: 410 g. - Temperature Class setting according to EN54-5
DUST version: 400 g. - Static or Rate of Rise functionality setting
Mounting 2x6 mm holes - LED functioning mode setting
Termination Ex d Cable Holder
- Alarm Status setting (Latched or Reflex)
Probe attachment 1/2" NPT
Junction box attachment ATEX version: 1/2" NPT - Service time counter
DUST version: 2 x M20 Cable Holder - Number of events counter
(Cables diameter 6 to 13 mm) - General information: sensor status, reset, number of power ON
Probe Ext. connection 1/2” GAS ISO 228 B and power OFF

Copyright OGGIONI sas

OGGIONI s.a.s. Via Lavoratori Autobianchi, 1 - P.T.B. Edif.13, strada 7 - 20832 Desio (MB) - Italy
Tel.+390362 629135 Fax +390362 622531 www.oggionisas.com - e-mail: info@oggionisas.com
 CONFIGURATIONS
Model Box Type Temperature Class Mode Led Status Alarm config.

TMP2 A1 = Static alarm 54-65°C M = Manual Reset

A2 = Static alarm 54-70°C A = Auto Reset
J = Atex 1 way 1/2” connection box B = Static alarm 69-85°C
T = Atex 2 ways T 1/2” connection box C = Static alarm 84-100°C 1 = OFF in normal condition
JO = Atex 1 way connection box with glass D = Static alarm 99-115°C ON in Alarm condition
TO = Atex 2 ways T connection box with glass 2 = PULSE in normal condition
D = Aluminium housing IP66 R = Static & Rate of Rise OFF in Fault condition
P = Only probe without housing S = Static ON in Alarm condition

Example of J or T box Example of JO or TO box Example of D box Example of P (Probe)

Not suitable for Suitable for Suitable for Not suitable for
Fire Detection Fire Detection Fire Detection Fire Detection
Example of product code creation:
Heat detector ATEX certified T-box with glass, Temp. class C with alarm intervention at 90°C static with pulse LED and Auto Reset alarm:
Code: TMP2-TO-C90S2A
Heat detector Dust box, Temp. class A2 with alarm intervention at 57°C Rate of Rise with OFF LED in normal condition and Auto Reset alarm:
Code: TMP2-D-A257R1A

Distributed by:

Copyright OGGIONI sas

OGGIONI s.a.s. reserves the right to change published specifications and designs without prior notice.

OGGIONI s.a.s. Via Lavoratori Autobianchi, 1 - P.T.B. Edif.13, strada 7 - 20832 Desio (MB) - Italy
Tel.+39 0362 629135 Fax +39 0362 622531 - www.oggionisas.com - e-mail: info@oggionisas.com