OUTDOOR TELECOM RECTIFIER

DPU6000

AC INPUT
Rated voltage 220VAC, single phase

Voltage range 85VAC ~ 300VAC

Frequency range 45Hz ~ 65Hz

Power factor ≥ 0.99 (100% load)

THD ≤ 5% (100% load)

DESCRIPTION DC OUTPUT
DPU6000 is a high-efficiency digital
rectifier module designed for using in Rated voltage 54.5VDC or 57VDC
outdoor environment.
Voltage range 42VDC ~ 58VDC
It integrates power rectification,
distribution, and monitoring. It Rated power 6000W (176–300VAC)
converts AC or HVDC power into 3000W (85–175VAC)
stable 54.5VDC/57VDC power,
generates fault alarms, and reports Efficiency ≥ 97%
monitoring data to the upstream
Voltage stabilization ≤ ±0.6%
network management system (NMS)
in real time. Ripple and noise ≤ 200 mVp-p

Current sharing imbalance < ±5% (20%–100% load)

FEATURES
▪ Integrated design: power MISCELLANEOUS
rectification, monitoring, power
distribution, and surge protection Dimensions (HxWxD) 420mm x 120mm x 300mm
(excluding terminals)
▪ Natural cooling
▪ Compact and lightweight design Weight 18 kg
▪ Mounting on a pole, wall, channel
Protection level IP65
steel, or angle steel
▪ Allows parallel operation of MTBF 500,000 hours (25℃ ambient
multiple rectifiers and lithium temperature)
batteries
▪ Same set of mounting kits for all
scenarios, survey-free
▪ Quick connectors for input, output
ports, and communication ports,
which are foolproof and prevent
reverse connection
▪ Online expansion to increase
loading capacity and backup time Sunelt Science & Technology Co. Ltd.
Email: info@sunelt.com
▪ Remote monitoring
sunelt.com

1
OUTDOOR TELECOM RECTIFIER
DPU6000

PROTECTION PARAMETERS EMC

AC input overvoltage Protection trigger: ≥298VAC Conducted emission (CE) AC input: class B, EN55032
Recovery range: 290VAC ~ 298VAC DC output: class A, EN55032

AC input undervoltage Protection trigger: ≤85VAC

Recovery range: 85VAC ~ 90VAC Radiated emission (RE) Class B, EN55032

DC input overvoltage Protection trigger: ≥410VDC Harmonic current IEC 61000-3-2

Recovery range: 400VDC ~ 410VDC
Voltage fluctuation and IEC 61000-3-3
DC input undervoltage Protection trigger: ≤85VDC flicker
Recovery range: 85VDC ~ 90VDC
ESD IEC 61000-4-2
Output overvoltage Protection trigger: 56VDC ~ 60VDC Contact discharge: 6 kV
(can be set via settings) Air discharge: 8 kV

Default: 59.5VDC Electrical fast transient IEC 61000-4-4

(EFT) AC power port: ±2 kV
AC surge Differential mode: 20 kA DC power port: ±1 kV
Common mode: 20 kA, 8/20 µs Signal port: ±0.5 kV

DC surge Differential mode: 10 kA Radiated susceptibility (RS) IEC 61000-4-3

Common mode: 20 kA, 8/20 µs 80 MHz to 2.7 GHz: 10 V/m

Safety standards IEC62368-1, IEC/EN 60950-22, IEC60950-

1, GB4943-2011, YD/T 1436-2014 Conducted susceptibility IEC 61000-4-6
(CS) Power port: 10 V
ENVIRONMENT Signal port: 3 V

Surge susceptibility IEC 61000-4-5

Cooling Natural
AC power port: 6 kV in differential mode,
(fanless design)
6 kV in common mode, 1.2/50µs
DC power port: 2 kV in differential mode,
Operating temp range –40℃ ~ +55℃
4 kV in common mode, 1.2/50µs
Signal port: 2 kV in differential mode,
Storage temp range –40℃ ~ +75℃
4 kV in common mode, 1.2/50µs
Humidity 5% ~ 95%
Voltage dip IEC 61000-4-11
(operating and storage) (no condensation)

Altitude ≤4000m
(2000m ~ 4000m operating temp drops 1℃
per 200m)

Sunelt Science & Technology Co. Ltd.

Email: info@sunelt.com

sunelt.com

2
OUTDOOR TELECOM RECTIFIER
DPU6000

(1) AC Input (2) GND (3) WiFi module port

(4) DC Output (5) COM_DIN port (6) COM_ALM port

(Load1 – Load7)
(7) Battery Output (8) Extra module port
(BAT1, BAT2)

Port Fuse capacity Function

PWR 63A AC input

LOAD1 – LOAD7 40A DC output

BAT1, BAT2 125A Battery port

Sunelt Science & Technology Co. Ltd.

Email: info@sunelt.com

sunelt.com

3
OUTDOOR TELECOM RECTIFIER
DPU6000

COM_DIN Pin Signal Description

1-7 NC NC

8 CANH CAN data send/receive

HIGH

9 CANL CAN data send/receive

LOW

Pin Signal Description

1 ALM1+ AC outage alarm

2 ALM1-

3 ALM2+ DPU fault alarm

COM_ALM
4 ALM2-

5 ALM3+ Battery fault alarm

6 ALM3-

7 RS485_TX+ RS485 transmits data POSITIVE

8 RS485_TX- RS485 transmits data NEGATIVE

9 RS485_RX+ RS485 receives data POSITIVE

10 RS485_RX- RS485 receives data NEGATIVE

11 ALM4+ DPU or battery generates an

recoverable alarm
12 ALM4-

13 NC NC

14 CANH CAN data send/receive HIGH

15 CANL CAN data send/receive LOW

IMPORTANT NOTE!
ALM1-ALM4 use variable resistance to indicate an alarm.

High resistance: ALARM

Low resistance: NORMAL
Sunelt Science & Technology Co. Ltd.
Email: info@sunelt.com

sunelt.com

4
OUTDOOR TELECOM RECTIFIER
DPU6000

COMMUNICATION PORTS
Port Communication Protocol Function
parameters

COM_DIN - CAN2.0 Communicates with a

lithium battery or a
cascaded PSU

Baud rate: 9600 bit/s, Slave protocol/BIN Communicates with

19200 bit/s, 115200 protocol upstream monitoring
COM_ALM bit/s, auto-negotiation equipment

- CAN2.0 Communicates with a

cascaded PSU

LIST OF AVAILABLE ALARMS

Alarm type Alarm

DPU fault Rectifier Fault/Address Conflict/SMU Fault

Battery fault Board Hardware Fault/Heater Fault/Battery Cell N Fault/Address Conflict

Recoverable DPU alarm Rectifier Protection/Rectifier Shutdown/Communication Failure/Rectifier Power

Failure/Parallel Fail/AC Overvoltage/AC Undervoltage

Recoverable battery Discharge Overcurrent Protection/Charge Overcurrent Protection/High

alarm Temperature protection/Low Temperature Protection/Abnormal Close/Charge
Overcurrent Protection/Discharge Overcurrent Protection

Sunelt Science & Technology Co. Ltd.

Email: info@sunelt.com

sunelt.com

5
OUTDOOR TELECOM RECTIFIER
DPU6000

TYPICAL SYSTEM CONFIGURATIONS

Number Number of Number of
DC power Battery backup Battery backup
of DPUs batteries loads
(W) capacity (Wh) power (W)
(pcs) (pcs) (pcs)

1 0 7 6000 0 0

1 1 7 6000 2400 3000

1 2 7 6000 4800 5700

1 3 7 6000 7200 7200

1 4 7 6000 9600 9600

PARALLEL CONNECTION DERATING

Number of Power
batteries

1 3000W

2 5700W

3-4 3000W x Number of batteries x 0.8

Sunelt Science & Technology Co. Ltd.

Email: info@sunelt.com

sunelt.com