Panel size: 220 x 420 x 11mm
Uniqueness of the cabinet demisters:
- Calcium Silicate body
- built-in on/off switch
-with connection cable
- Thermal cutout device
- Can be painted (extra cost)
Installation instructions
1. The moisture free heater
should be installed at the ceili
or high level of the cabinet
2. Drill four holes at the ceiling
or the high level of the cabinet
3. Use the provided screws for the
mounting legs to the wall
4. Do not force the heater on to the
mounting legs. This could cause
resistance between the heater
and mounting legs which may
induce stress to the heater
resulting in cracking when the
the heater isin operation
(Ignoring these instructions is
likely to void the warranty)
4. When satisfied, the heater is
mounted correctly ensure that
the caps lock into the groove on
the mounting legs
5. Fit plug into electric socket-outlet
6. Warning: In order to avoid over
heating, DO NOT COVER THE
HEATER
Ceiling mounted
Features:
1, Materials: Calcium Silicate (Uniqueness)
- operating stable at high temp (it does not
crack at 200C. Deg)
- very good thermal conductivity
- electrical insulation
2. Max surface temp: 40W: ~55C; 55W: 60-65 C
3. With safety device” thermal cutout” if the
heater overheat (Uniqueness)
4. Built-in On/Off switch so the connection,
cable can be hidden at the back of the
heater (Uniqueness)
5. Hidden w
6. 40-55W, 230V/1ph/50Hz
g connection method (Uniqueness)
7. With no moving parts and with thermal cutout
device, the cabinet heater’s safety and
longevity is assured
8. Provide dry and warm condition inside
cabinets
9. The cabinet heater can be painted to
match the decor of a cabinet (exclusive)
(Uniqueness)
10. New Zealand brand; Production line in
India (all components approved by IEC or UL)
11. 1-year product warranty