Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Basell 2427h

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Lupolen 2427 H

Polyethylene, Low Density

Product Description
Lupolen 2427 H is an additivated, low density polyethylene. It contains an antioxidant, slip and
anti-blocking agent. It is delivered in pellet form.

Foodlaw compliance information about this product can be found in separate product
documentation.

This product is not intended for use in medical and pharmaceutical applications.

Product Characteristics

Status Commercial: Active

Test Method used ISO

Availability Europe, Asia-Pacific, Africa-Middle East

Processing Methods Blown Film, Cast Film

Features Unspecified Antiblocking , Low Friction, Opticals, Good


Processability, Unspecified Slip

Typical Customer Bags & Pouches, Blown Film, Cast Film, Film, Food Packaging Film,
Applications Shrink Film

Typical Properties Method Value Unit


Physical
Density ISO 1183 0.924 g/cm³
Melt flow rate (MFR) (190°C/2.16kg) ISO 1133 1.9 g/10 min
Mechanical
Dart drop impact (50µm, Blown Film) ASTM D 1709 110 g
Tensile Modulus ISO 527-1, -2 260 MPa
Tensile Stress at Yield ISO 527-1, -2 11.0 MPa
Tensile Strength ISO 527-1, -3
25.0 MPa
Note: MD
21.0 MPa
Note: TD
Tensile Strain at Break ISO 527-1, -3
250 %
Note: MD
600 %
Note: TD
Thermal
Vicat softening temperature (A50 (50°C/h 10N)) ISO 306 94.0 °C
Melting Temperature ISO 3146 111 °C
Optical
Haze (50µm) ASTM D 1003 <9 %
Gloss ASTM D 2457
(20°, 50µm) >50
(60°, 50µm) >100
Film
Melt Temperature 160 to 200 °C

Additional Properties
Film properties tested using 50 µm thickness blown film extruded at a melt temperature of 180°C
and a blow-up ratio of 1:2.5.
Natural Silica, ISO 3451-1: 0.1%
Erucamide, DIN 51454: 0.05%
Failure Energy, DIN 53373, 50 µm: 4 J/mm
Coefficient of Friction, ISO 8295: <20%
Recommended Film Thickness: 20 to 60 µm

Notes
Typical properties; not to be construed as specifications.

You might also like