EN

PX-765
USER’S GUIDE (Full)
Before using this Digital Piano for the first time,
be sure to read the separate USER’S GUIDE to
familiarize yourself with basic operations.

PX765-E-3A
 Contents

Getting Ready ..................................................................................................... EN-31

Assembling the Stand ............................................... EN-31 Connecting Headphones ...........................................EN-35
To connect the cable................................................. EN-34 Connecting Audio Equipment or an Amplifier ............EN-36
To install the music stand............................................ EN-34 Bundled and Optional Accessories............................EN-36
Removing the Protective Tape from the Keyboard..... EN-35

General Guide .................................EN-2 LISTEN..................................................................... EN-23

LESSON................................................................... EN-23
FUNCTION Button......................................................... EN-3
PLAY ........................................................................ EN-23
Auto Resume and Operation Lock ................................ EN-3
CONCERT PLAY SELECT (Song) (SELECT +/–) ... EN-23
About Music Score data ................................................ EN-3
CONCERT PLAY VOLUME (VOLUME +/–) ............ EN-23
Power Outlet....................................EN-4 Music Library volume ............................................... EN-23
Turning Power On or Off ............................................... EN-4 Metronome volume .................................................. EN-23
Returning the Digital Piano to Its Factory Default Temperament........................................................... EN-24
Settings.......................................................................... EN-4 Temperament Base note.......................................... EN-24
Temperament select ................................................ EN-24
Playing with Different Tones .........EN-5 Touch response ....................................................... EN-24
Selecting and Playing a Tone........................................ EN-5 Transpose ................................................................ EN-24
Layering Two Tones ...................................................... EN-6 A-tuning.................................................................... EN-24
Using Effects ................................................................. EN-7 Octave shift .............................................................. EN-24
Using the Digital Piano’s Pedals.................................... EN-8 Keyboard volume ..................................................... EN-24
Using the Metronome .................................................... EN-9 USB flash drive mode .............................................. EN-25
Splitting the Keyboard for Duet Play............................ EN-10 Local control............................................................. EN-25
Send channel ........................................................... EN-25
Using Built-in Songs Operation tone ......................................................... EN-25
(Concert Play, Music Library, Panel lock................................................................. EN-25
Auto Resume ........................................................... EN-25
Demo Tunes) .................................EN-12
Linking with an Application (APP Function) ................. EN-26
Performing Demo Play ................................................ EN-12
Concert Play ................................................................ EN-12 Connecting to a Computer...........EN-27
Practicing with a Concert Play Song ........................... EN-13 Minimum Computer System Requirements ................. EN-27
Music Library ............................................................... EN-14 Connecting the Digital Piano to Your Computer .......... EN-27
Playing Back a Specific Music Library Song ............... EN-15 Using MIDI ................................................................... EN-28
Practicing with a Music Library Song........................... EN-15 Transferring Song Data with a Computer .................... EN-28
Recording and Playback ..............EN-16 Reference.......................................EN-37
Recording to Built-in MIDI Recorder............................ EN-16 Troubleshooting ........................................................... EN-37
Using the MIDI REC Button......................................... EN-16 Product Specifications ................................................. EN-38
Configuring Settings with Appendix............................................ A-1
the Keyboard.................................EN-19 Tone List ...........................................................................A-1
To configure settings with the keyboard ...................... EN-19 Concert Play List...............................................................A-1
Keyboard Keys Used for Configuring Settings ............ EN-20 Music Library List..............................................................A-1
Parameter List ............................................................. EN-22
Reverb ..................................................................... EN-22 MIDI Implementation Chart
Tone selection.......................................................... EN-22
Chorus ..................................................................... EN-22
Brilliance .................................................................. EN-22
Layer balance .......................................................... EN-22
Lower Pedal ............................................................. EN-22
Damper noise........................................................... EN-22
Select layer tone ...................................................... EN-22
Duet mode ............................................................... EN-22
Music Library song select
(MUSIC LIBRARY SELECT).................................... EN-23
Tempo (TEMPO)...................................................... EN-23
Beat (BEAT)............................................................. EN-23
METRONOME TEMPO ........................................... EN-23
METRONOME BEAT............................................... EN-23 Company and product names used in this manual may
CONCERT PLAY a............................................. EN-23 be registered trademarks of others.

EN-1
 General Guide

Front
1

bn

5 6

7
bo
8

Bottom

Rear

bk bl bm

EN-2
 General Guide

*CAUTION
• Make sure that the cover is fully open whenever you are playing on the keyboard. A partially open cover can
suddenly close unexpectedly and pinch your fingers.

NOTE
• The names shown here are always indicated in bold when they appear within the text of this manual.
 P (POWER) button  GRAND PIANO button

 VOLUME controller  E.PIANO 1 button

 FUNCTION button  Pedal connector

 METRONOME button  USB port

 REVERB button  Power terminal (DC 12V)

 MIDI REC button  PHONES/OUTPUT jacks

 a button  Power lamp

FUNCTION Button
The FUNCTION button is used in combination with other buttons
and keys.
To change a setting, hold down the FUNCTION button as you press
the button or key that is assigned the setting you want to configure.
 When you press a key, the Digital Piano beeps to indicate the
current setting.
 A long beep indicates that a setting is turned off.

NOTE
• For details about operations and settings, see “Configuring Settings with the Keyboard” on page EN-19.

Auto Resume and Operation Lock

Your Digital Piano can be configured to save its current settings when power is turned off and restore them when
turned back on again (Auto Resume). You can also lock its buttons to protect against operation errors (Operation
Lock). For details, see “Parameter List” on pages EN-22 - EN-25.

About Music Score data

You can use a computer to download music score data from the CASIO Website. For more information, visit the
URL below.

https://support.casio.com/global/en/emi/manual/PX-765/

EN-3
 Power Outlet
After you finish assembling the stand, turn on the
NOTE
Digital Piano. For details, see “Getting Ready” on page
EN-31. • Turning off the Digital Piano after performing the
above steps will re-enable Auto Power Off.

Turning Power On or Off Returning the Digital Piano to

1. Press the P (POWER) button to turn on Its Factory Default Settings
Digital Piano power.
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.

1. Turn off the Digital Piano.

• The power lamp lights and the Digital Piano powers 2. Holding down the FUNCTION, MIDI REC and
up. The power up operation takes about 5 seconds. E.PIANO 1 buttons, press the P (POWER)
button.
2. To turn off the Digital Piano, hold down the
P (POWER) button until the power lamp 3. Hold down the FUNCTION, MIDI REC and
goes out. E.PIANO 1 buttons until the E.PIANO 1 lamp,
and then the GRAND PIANO lamp, and then
NOTE
the R lamp start to flash.
• Pressing the P (POWER) button to turn off power
• After some time, the flashing will stop.
actually puts the Digital Piano into a standby state.
Minute amounts of current continue to flow within
the Digital Piano in the standby state. If you do not
4. Release the FUNCTION, MIDI REC and
plan to use the Digital Piano for a long time or if E.PIANO 1 buttons.
there is a lightning storm in your area, be sure to • The Digital Piano will initialize its internal system.
unplug the AC adaptor from the power outlet. You will be able to use the Digital Piano in a short
while.

Auto Power Off NOTE

• See “Turning Power On or Off” (page EN-4) for
This Digital Piano is designed to turn off automatically
information about turning power on and off.
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
• You also can use the procedure below to temporarily
suspend Auto Power Off.

■ To disable Auto Power Off

1. While the Digital Piano is turned on, press the

P (POWER) button to turn it off.

2. While holding down the FUNCTION button,

press the P (POWER) button to turn on the
Digital Piano.

• Auto Power Off will be disabled at this time.

EN-4
 Playing with Different Tones

Selecting and Playing a Tone

The Digital Piano comes with 19 built-in tones. *1

*2

*1: The names of the tones are marked above the keyboard keys to which they are assigned.
*2: In this manual, these six tones are collectively referred to as “piano tones”. The CONCERT, MELLOW, and
BRIGHT tones are collectively referred to as “GRAND PIANO tones”.

To select a tone

1. Select the tone you want.

NOTE
 To select GRAND PIANO CONCERT or
• Some keys may have more than one tone assigned.
E.PIANO 1 In this case, each press of the key cycles to the next
• Press the GRAND PIANO button or assigned tone. Which tone is selected by the key
E.PIANO 1 button. press is indicated by beeps.
Example: Cycling through MODERN, ROCK, and
JAZZ settings
MODERN: (1 beep)
ROCK: (2 beeps)
• The button lamp of the selected tone will JAZZ: (3 beeps)
light.
• Of the Digital Piano’s 19 built-in tones, the first
 To select one of the other tones
three are grand piano tone. Each tone has its own
• While holding down the FUNCTION distinctive merits, so you should select the tone that
button, press the keyboard key that suits the song you are playing along with or your
corresponds to the tone you want to select. own personal preferences.
Tone Name Characteristics
CONCERT This is a full concert grand piano tone
for dynamic and natural tone changes.
This tone is designed to reproduce
damper, resonance, and other piano
nuances, which makes it ideal for
virtually any type of piano
performance.
MELLOW A warm, subdued grand piano tone.
BRIGHT A bright and clear grand piano tone.

2. Use the VOLUME controller to adjust the

volume.

EN-5
Playing with Different Tones

Bass Tone (BASS)

Layering Two Tones
Selecting the BASS (LOWER) tone in step 1 of the
above procedure will assign the bass tone to the low Use the following procedure to layer two tones, so they
range (left side) of the keyboard. The high range (right sound at the same time.
side) will be assigned the tone that was selected when When specifying two tones for layering, first tone you
you pressed the BASS key. select will be the main tone, while the second tone will
• BASS tone lets you effectively split the keyboard be the layered tone.
between two different tones.
Split Point 1. Hold down the FUNCTION button and press
Low Range High Range the Select Layer Tone key.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” (page EN-20).
BASS JAZZ ORGAN
(Currently selected tone) • Each press of the keyboard key toggles between on
and off.

NOTE
2. Hold down the FUNCTION button and press
key of the tone to be layered.
• To return the keyboard to a single tone, select any
tone other than BASS.
• You cannot select BASS when recording to Track 2.
• You can configure settings to sustain reverberation
GRAND PIANO BRIGHT
of the BASS (LOWER) tone while the damper pedal
or sostenuto pedal is pressed. For more information, STRINGS 2
see “Lower Pedal” (page EN-22).
3. To return to the original tone, hold down the
FUNCTION button and press the Select
Layer Tone key (which exits the Layer Mode).

NOTE
• You cannot layer the BASS tone with another tone.
• You cannot perform the layer operation when
recording to Track 2.

EN-6
 Playing with Different Tones

To adjust the volume balance between

two layered tones Using Effects
Reverb : Makes your notes resonate.
1. While holding down the FUNCTION button, Chorus : Adds more breadth to your notes.
use the keyboard keys shown below to adjust • For details about using the keyboard keys for
the volume of the layered tones. settings, see “Keyboard Keys Used for Configuring
Settings” (page EN-20).

To apply Reverb

1. Each press of the REVERB button toggles

reverb between on and off.
• Reverb is applied when it is turned on.
C1 C2 C3 C4 C5 C6 C7 C8

Center ■ To select the reverb type

Volume of the layered tone
(Second tone you selected)
Volume of the main tone
(First tone you selected)
1. While holding down the FUNCTION button,
press the keyboard key of the reverb type to
• To return the volume setting to its initial default, hold
be applied.
down the FUNCTION button and press both of the 1: Room
keys at the same time. 2: Small hall
3: Large hall
4: Stadium

To apply chorus to a tone

1. While holding down the FUNCTION button,

use the Chorus keyboard key to cycle
through the available settings.
• Each press of the Chorus keyboard key causes the
Digital Piano to beep according to which setting is
selected, as shown in the table below.
• Chorus

Number of Beeps Setting

1 (long) Off (OFF)
1 (short) Light Chorus
2 Medium Chorus
3 Deep Chorus
4 Flanger (whooshing effect)

About DSP
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.

EN-7
Playing with Different Tones

Disabling Damper Noise Output

Using the Digital Piano’s
Damper noise is a slight metallic ringing sound that is
Pedals generated as the damper of an acoustic piano separates
Your Digital Piano comes equipped with three pedals: from the wires pedal when the damper pedal is
damper, soft, and sostenuto pressed. The damper resonance of your Digital Piano
normally includes damper noise, but you can perform
the procedure below to disable its output. Damper
noise can be applied to the four piano tones (three
GRAND PIANO tones and MODERN).

1. While holding down the FUNCTION button,

Soft pedal press the Damper Noise keyboard key.
Damper pedal
• For details about using the keyboard keys for
Sostenuto pedal
settings, see “Keyboard Keys Used for Configuring
Settings” (page EN-20).
Pedal Functions • Each press of the key toggles the setting and causes
the Digital Piano to beep as described below.
 Damper Pedal – Long beep: Damper noise output disabled
Pressing the damper pedal while playing will cause the – Short beep: Damper noise output enabled
notes you play to reverberate for a long time. Half-
pedal operation (pressing the pedal part way) is also
supported.
• When one of the GRAND PIANO tones or the
MODERN piano tone is selected, using the damper
pedal adds damper resonance that is similar to that
produced on an acoustic grand piano.
 Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained until the pedal is
released.
 Soft Pedal
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.

NOTE
• If pressing the pedal does not produce the desired
effect, it could mean that the pedal cord is not
connected properly. Refer to step 1 under “To
connect the cable” (page EN-34).

EN-8
 Playing with Different Tones

5. While holding down the FUNCTION button,

Using the Metronome use the TEMPO keys to specify a tempo
1. Press the METRONOME button. value in the range of 20 to 255 beats per
• This starts the metronome. minute.
• The lamp flashes with each beat.

2. While holding down the FUNCTION button,

press the METRONOME BEAT keyboard
key.
• Keep the FUNCTION button depressed as you
advance to step 3.

3. Hold down the FUNCTION button and press

the BEAT keyboard key (0 to 9) that
corresponds to the beat you want to specify.
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can also use the tempo value input keys (0 to 9)
to enter a specific tempo value.
• Input three digits as the tempo value.
Example: To set a tempo of 20, press keys 0, 2, and
then 0.

6. Press the METRONOME button to turn off

the metronome.

NOTE
• You can specify a beat value in the range of 0 to 9 • If you used the numeric input (0 to 9) keyboard keys
(beats per measure). A chime will sound on the first to input beat and/or tempo values and the values
beat of each measure, and clicks will sound for the
are within the allowable setting ranges, the Digital
remaining beats. Specifying 0 plays a straight click,
Piano will emit a high pitch beep when you release
without any chime. This setting lets you practice with
a steady beat. the FUNCTION button. If a value is outside the
allowable range, a low-pitch sound will be emitted.
4. Release the FUNCTION button and then hold • In step 5 of the above procedure, pressing the + and
it down again as you press the – keys at the same time will set the tempo of the
Concert Play lesson song or Music Library song (in
METRONOME TEMPO keyboard key. the case of a recorded song, the tempo when the
• Keep the FUNCTION button depressed as you song was recorded) that was last selected on the
advance to step 5. Digital Piano.

EN-9
Playing with Different Tones

To adjust the metronome volume

Splitting the Keyboard for
You can perform the following procedure at any time,
regardless of whether or not the metronome is
Duet Play
sounding. You can split the keyboard in the center so the left and
right sides have the same range. The left outer pedal is
1. While holding down the FUNCTION button, the left side damper pedal, while the right outer pedal
use the Metronome Volume keys to specify a is the right side damper pedal.
volume value in the range of 0 to 42.
Keyboard
• For details about using the keyboard keys for Split point
settings, see “Keyboard Keys Used for Configuring
Left keyboard Right keyboard
Settings” on page EN-20.
• Each press of the + and – key raises or lowers the
metronome volume value by 1.
C3 C4 C5 C6 C3 C4 C5 C6
(middle C) (middle C)
NOTE
• To return to the initial default setting, press + and –
at the same time.
Pedals

Left side damper pedal Right side damper pedal

Left and right side damper pedal

NOTE
• Only the damper pedal for the right side keyboard
supports half-pedal operations.

EN-10
 Playing with Different Tones

1. Select the piano tone you want to use for the Changing the Octaves of the duet
duet. keyboards
Example: GRAND PIANO (BRIGHT)
You can change the ranges of the left and right
2. To cycle between the Duet Mode settings keyboards in octave units from their initial default
settings. This comes in handy, for example, if the initial
below, hold down the FUNCTION button and
default range is not enough when one person is
press the Duet Mode key. playing the left hand part and another person is
Off playing the right hand part.
On
Pan: Outputs left side keyboard tone from the left
speaker and right side keyboard tone from the
1. While holding down the FUNCTION and
right speaker.
GRAND PIANO buttons, press the keyboard
C key that you want located at C4 (middle C)
IMPORTANT! of the left keyboard. Keep FUNCTION and
• The Octave Shift and Transpose settings cannot be GRAND PIANO buttons depressed as you
changed while On or Pan is selected for the Duet
advance to step 2, below.
Mode setting.
• This will sound the note assigned to C4 and change
• While Pan is selected for the Duet Mode settings,
the octave of the left keyboard.
the Hall Simulator, Reverb, and Chorus settings
cannot be changed.

Example: Press the keyboard key of the leftmost C will

assign the range shown below.
Left keyboard Right keyboard

C4 C5 C6 C7 C3 C4 C5 C6

(Pressed key)

1 octave higher than initial Unchanged

setting

2. While still holding down the FUNCTION and

GRAND PIANO buttons, press the keyboard
C key that you want located at C4 (middle C)
of the right keyboard.
• This will sound the note assigned to C4 and change
the octave of the right keyboard.

NOTE
• Exiting the Duet Mode and then selecting On or Pan
for the Duet Mode setting again will return the
keyboards to their initial default ranges.

EN-11
 Using Built-in Songs (Concert Play, Music
Library, Demo Tunes)
Your Digital Piano comes with 10 built-in piano and
orchestra tunes (Concert Play 1 through 10), and 60 Concert Play
piano solos (Music Library 1 to 60). Concert Play has recordings of a live orchestra, which
Concert Play lets you enjoy playing along with you can use to play along with authentic
orchestral accompaniment. You can use Music Library accompaniment.
to practice famous piano pieces. You can also use Concert Play for 3-step practice.
Step 1: LISTEN
IMPORTANT!
Listen to playback of the piano and orchestra to
• Whenever you change to another song, this Digital
Piano loads the song data. Note that button familiarize yourself with the music.
operations are disabled while song loading is in Step 2: LESSON
progress. If you are playing something on the Practice the Concert Play piano part.
keyboard, changing the song may cause note output • You can turn off the left hand part or right hand
to stop. part of a built-in song and play along on the piano.
Step 3: PLAY
Performing Demo Play Play along with the orchestra accompaniment.
• The Concert Play contains actual recordings of an
1. While holding down the FUNCTION button, orchestra. Because of this, the instrument sounds are
press the METRONOME button. different from the tones that can be selected with this
• This starts sequentially looped playback of all piano (page EN-5). This also means that Concert
Concert Play (Listen) songs and Music Library songs. Play playback includes breath sounds and
• You can play along with a song on the keyboard as it performance noises.
is playing. The tone assigned to the keyboard is the
one that is preset for the song that is playing.

2. To change the demo song, hold down the

FUNCTION button and press the MIDI REC
button or REVERB button.
• To advance to the next demo song, hold down the
FUNCTION button and press the MIDI REC button.
• To return to the previous demo song, hold down the
FUNCTION button and press the REVERB button.
• For a list of songs, see page A-1.

3. Press the a button to stop built-in song

play.

NOTE
• Pressing the METRONOME button while holding
down the FUNCTION button during Concert Play
jumps to the first Music Library song. Performing
the same operation during Music Library play jumps
to the first Concert Play song.
• The tune selection and playback stop operations
described above are the only operations that are
possible during demo tune play.

EN-12
 Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

3. While holding down the FUNCTION button,

Practicing with a Concert Play press the CONCERT PLAY a keyboard
Song key to start playback.
• Playback will stop automatically when the end of the
To listen to a Concert Play song (LISTEN) song is reached.

4. To stop playback, hold down the FUNCTION

1. While holding down the FUNCTION button,
button as you press the CONCERT PLAY
use the CONCERT PLAY SELECT + and –
a keyboard key again.
keyboard keys to scroll song numbers in
sequences (from 1 to 10). NOTE
• For information about Concert Play songs, see the • You can use adjust the volume level of the playback,
“Concert Play List” on page A-1. if you want. See “Configuring Settings with the
Keyboard” (page EN-19) for more information.

2. While holding down the FUNCTION button,

press the LISTEN keyboard key.
• This enters the Listen Mode for listening to the piano
and orchestra performance.
• Playback tempo is fixed and cannot be changed
during Listen Mode playback.

EN-13
Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

To practice the piano part (LESSON) To play along with the orchestra
accompaniment (PLAY)
PREPARATION
• You can change tempo of the playback, if you want.
See “Configuring Settings with the Keyboard” (page
1. While holding down the FUNCTION button,
EN-19) for more information. press the PLAY keyboard key.
• This will enter the Play Mode, which plays the
NOTE orchestra part without the piano part.
• Some Concert Play tunes incorporate tempo changes
in their arrangements. Because of this, the playback
tempo may at times be faster or slower than the
tempo setting.

1. While holding down the FUNCTION button,

press the LESSON keyboard key.
• This enters the Lesson Mode, which allows simple
play along with the piano part.

2. While holding down the FUNCTION button,

press the CONCERT PLAY a keyboard
key to start playback.
• Playback tempo is fixed and cannot be changed
during Play Mode playback.

3. Play the piano part on the keyboard.

4. To stop playback, hold down the FUNCTION

2. While holding down the FUNCTION button,
button as you press the CONCERT PLAY
press the a button to select the part you
a keyboard key again.
want to turn off.
• Pressing a button toggles its part on (button lamp on)
and off (button lamp off). Music Library
Right hand Left hand
Both parts on
part off part off
You can use the Music Library for your listening
enjoyment or to practice piano songs.
• The Music Library includes 60 songs, numbered 1
through 60.
• You can also import up to 10 songs* from a
Left hand Right hand computer to Digital Piano memory, and assign them
Music Library song numbers 61 through 70.
* You can download music data from the Internet and
3. While holding down the FUNCTION button, then transfer it from your computer to Digital Piano
press the CONCERT PLAY a keyboard memory. See “Transferring Song Data with a
Computer” on page EN-28 for more information.
key.
• This starts playback, without the part you turned off
in step 2.

4. Play the missing part on the keyboard.

5. To stop playback, hold down the FUNCTION

button as you press the CONCERT PLAY
a keyboard key again.

EN-14
 Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

Playing Back a Specific Music Practicing with a Music Library

Library Song Song
1. Find the song number of the song you want to You can turn off the left hand part or right hand part of
a song and play along on the Digital Piano.
play in the “Music Library List” on page A-1.

2. To change to another song, hold down the NOTE

• The Music Library includes a number of duets.
FUNCTION button as you use the MUSIC
While a duet is selected, you can turn off the first
LIBRARY SELECT (+, –, 0 to 9) keys to piano (Primo) or second piano (Secondo) tone and
specify a song number. play along with the song.
• Each press of the + or – key raises or lowers the song • Some music library tunes incorporate tempo
number by 1. changes in their arrangements. Because of this, the
• You can also input a value from 0 to 9 to specify a playback tempo may at times be faster or slower
Music Library song number. than the tempo setting.
• Input two digits as the song number.
Example: To specify song number 5, press keys 0 and PREPARATION
then 5. • Select the song you want to practice and adjust the
tempo. See step 3 under “Using the Metronome”
(page EN-9).

1. While holding down the FUNCTION button,

press the a button to select the part you
want to turn off.
• Pressing a button toggles its part on (button lamp on)
and off (button lamp off).

Right hand Left hand

Both parts on
part off part off

3. Press the a button.

• This starts the playback of the song.
Left hand Right hand
4. To stop playback, press the a button
again.
• Playback will stop automatically when the end of the
song is reached.
2. Press the a button.
• This starts playback, without the part you turned off
in step 1.
NOTE
• Pressing the + and – keys at the same time in step 2 3. Play the missing part on the keyboard.
of the above procedure will select song number 1.
• You also can adjust the playback tempo and volume 4. To stop playback, press the a button
of the song. See “Configuring Settings with the
again.
Keyboard” on page EN-19 for more information.

EN-15
 Recording and Playback
You can record notes you play with the Digital Piano’s Recording Data Storage
MIDI recorder for later playback. When a commercially
• Starting a new recording deletes any data that was
available USB flash drive is inserted in the Digital
previously recorded in memory.
Piano’s USB flash drive port, audio data is recorded to • Should power fail during recording, all of the data in
and played back from the USB flash drive (Audio the track you are recording will be deleted.
Recorder).
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no
Recording to Built-in MIDI responsibility for any damages, lost profits, or claims
Recorder by third parties arising from the deletion of recorded
data due to malfunction, repair, or for any other
reason.
Tracks
A track is a container of recorded data, and a song
consists of two tracks: Track 1 and Track 2. You can
Using the MIDI REC Button
record each track separately and then combine them so Each press of the MIDI REC button cycles through the
they play back together as a single song. recording options in the sequence shown below.
Lit Flashing Off
While playing
Track 1 Record
back. . .

Song

Playback Record
Track 2 Record Normal
Standby Standby

Memory Capacity Recording to a Specific Song Track

• You can record approximately 5,000 notes in Digital After recording to either of the tracks of a song, you can
Piano memory. record to the other track while listening to playback
• The MIDI REC button lamp will flash at high speed what you recorded in the first track.
when memory runs low.
• Recording stops automatically if the number of 1. Press the MIDI REC button once or twice so
notes in memory exceeds the maximum. the MIDI REC lamp is flashing.

Recorded Data
• Keyboard play
• Tone used for keyboard play
• Beat (Track 1 only)
• Tempo setting (Track 1 only)
• Layer setting (Track 1 only) • At this time the L lamp will flash to indicate that the
• Duet (Track 1 only) Digital Piano is standing by for recording to Track 1.
• Temperament (Track 1 only)
• Keyboard volume (Track 1 only)
• Chorus (Track 1 only)
• Brilliance (Track 1 only)
• Reverb setting (Track 1 only)
• Damper Noise On/Off (Track 1 only)

EN-16
 Recording and Playback

2. While holding down the FUNCTION button, Recording to One Track while Listening
press the a button to select the track you to Playback of the Other Track
want to record.
• Make sure that the indicator lamp for the record track 1. Press the MIDI REC button so its lamp is lit.
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 selected

2. While holding down the FUNCTION button,

press the a button to select the track you
want to play back while recording.
3. Select the tone and effects (Track 1 only) you
3. Press the MIDI REC button so its lamp is
want to use in your recording.
flashing.
• Tone (page EN-5)
• Effects (page EN-7) • This will cause the L lamp to flash.

NOTE
4. While holding down the FUNCTION button,
press the a button to select the track you
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings, want to record.
and then press the METRONOME button. See • Make sure that the indicator lamp for the record track
“Using the Metronome” on page EN-9 for more is flashing.
information. Example: To listen to playback of Track 1 as you record
to Track 2
4. Press the a button or start playing.
• Recording will start automatically.

5. To stop recording, press the a button.

• This will cause the MIDI REC button lamp and the
lamp of the track you recorded to change from
flashing to lit. Lit (Play) Flashing (Record Standby)
• To play back the track you just recorded, press the
a button.
5. Select the tone and effects (Track 1 only) you
6. After you are finished recording or playing want to use for your recording.
back, press the MIDI REC button so its lamp
goes out. 6. Press the a button or start playing.
• This will start both playback of the recorded track
and recording to the other track.
• If, while recording is in progress, you want to
rerecord from the beginning, hold down the MIDI
REC button until the Digital Piano beeps. This
discards the current recording data and enters
recording standby.

7. To stop recording, press the a button.

EN-17
Recording and Playback

Playing Back from Digital Piano Memory Deleting Recorded Data

The following procedure deletes a specific track of a
1. Press the MIDI REC button so its lamp is lit. song.

IMPORTANT!
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
NOTE
• When a song has something recorded in both tracks,
1. Press the MIDI REC button once or twice so
you can turn off one track and play back just the the MIDI REC lamp is flashing.
other track, if you want.

2. Press the a button.

• This starts playback of the song and/or track you
selected.

NOTE
• You can change the tempo setting as a track is
playing.
2. While holding down the FUNCTION button,
• Press the a button again to stop playback.
press the a button to select the track you
want to delete.

3. Press the MIDI REC button until its lamp is lit.

• This will cause the lamp of the track you selected in
step 2 of this procedure to flash.
Example: If you selected Track 2 for deletion

Off Flashing: Delete standby

4. Once again, hold down the FUNCTION

button as you press the a button.
• This deletes the selected track and enters record
standby.
• To cancel the delete operation at any time, press the
MIDI REC button so its lamp becomes unlit.

NOTE
• Only the Digital Piano’s a button are operational
from step 3 until you actually perform the delete
operation in step 4. No other button operation can be
performed.

EN-18
 Configuring Settings with the Keyboard
In addition to selecting tones and songs (Concert Play 4. Release the FUNCTION button to complete
or Music Library), you also can use the FUNCTION the setting procedure.
button in combination with the keyboard keys to
configure effect, keyboard touch, and other settings. NOTE
• You can configure the Digital Piano so no operation
To configure settings with the tone sounds in step 3. For details, see “ Operation
tone” under “Parameter List” on pages EN-22 -
keyboard EN-25.

1. Use the “Parameter List” on pages EN-22 - Keyboard Setting Operation Types
EN-25 to find the setting you want to
There are four types of operations that you can perform
configure, and note its details.
while configuring settings with the keyboard keys:
2. Use “Keyboard Keys Used for Configuring Type A, Type B, Type C, and Type D.
Settings” on page EN-20 to find the location Type A : Direct input
on the keyboard for configuring the setting Example: Pressing the JAZZ ORGAN keyboard key to
you want. select the JAZZ ORGAN tone

3. While holding down the FUNCTION button, Type B: Raising or lowering a setting using the + and
press the keyboard key for the setting you – keyboard keys
want to configure. • Holding down a key raises or lowers the setting at
high speed.
• The Digital Piano will sound an operation tone after it
• To return to the initial default setting, press both
configures the setting.
keys at the same time.
Example: To lower the Concert Play volume, press the
CONCERT PLAY VOLUME minus (–) key.
Type C : Inputting a value using the number
(0 through 9) keyboard keys.
• To input a two-digit value, press 0 and then 2. To
input a three-digit value, press 0, 2, and then 0.
CONCERT PLAY
VOLUME – key
Type D: Toggling or cycling through settings by
pressing a keyboard key
• When you press a key, the Digital Piano will beep to
let you know which setting is selected.
• A long beep indicates that the applicable setting is
turned off.
Example: While chorus is turned off, pressing the Chorus
keyboard key twice will cause the Digital Piano
to beep twice, which indicates that the Medium
Chorus setting is selected.

NOTE
• You can find out what operation type applies to each
setting by checking the “Operation Type” in the
“Parameter List” on pages EN-22 - EN-25.

EN-19
Configuring Settings with the Keyboard

Keyboard Keys Used for Configuring Settings

• The numbers  through  correspond to the same numbers in the “Parameter List” on pages EN-22 - EN-25.

[Left keyboard]
Local Control
Lower Pedal
Reverb

OFF/ON OFF/ON

(C1) (C2)

  OFF/ON

USB Flash Drive Mode

Send Channel
Chorus
Damper Noise

[Overall]

[Middle Left Keyboard]

PLAY
LESSON CONCERT PLAY SELECT (Song)

LISTEN CONCERT PLAY VOLUME

Music Library song Select/Tempo/Beat/
Temperament select

   

(C3) (C4)

CONCERT PLAY a (Song)

EN-20
 Configuring Settings with the Keyboard

[Middle Right Keyboard]

METRONOME BEAT Temperament

METRONOME TEMPO Select Layer Tone Base Note
Touch Response
Tone

(C5) (C6)

[Overall]

[Right keyboard]
Octave Shift
A-tuning Keyboard Volume
Layer Balance Music Library Song Volume
Transpose Metronome Volume
Brilliance
Operation Tone

                OFF/ON

(C7) (C8)

OFF/ON
OFF/ON

Duet Mode
Auto Resume
Panel Lock

EN-21
Configuring Settings with the Keyboard

Parameter List
■ Tones
Operation
Type
Parameter Settings Description Remarks
(page
EN-19)
 Reverb Off, 1 to 4 A Specifies the reverb of notes.
Default: 2 (page EN-7)
 Tone selection See page EN-5. A Assigns a tone to the keyboard.
Default: GRAND (page EN-5)
PIANO
(CONCERT)
 Chorus Off, 1 to 4 D Controls the breadth of notes.
Default: Off (page EN-7)
 Brilliance –3 to 0 to 3 B Specifies the brilliance of notes. • To return the setting to its initial default (0),
Default: 0 Pressing [+] makes notes brighter press [+] and [–] at the same time.
and harder. Pressing [–] makes
notes mellower and softer.
 Layer balance –24 to 0 to 24 B Specifies the volume balance • To return the setting to its initial default
Default: –10 between the main tone and the (–10), press [+] and [–] at the same time.
layered tone. (page EN-6)
 Lower Pedal Off, On D When turned on and the BASS
Default: Off (LOWER) tone is selected, pressing
the damper pedal or sostenuto
pedal will apply sustained
reverberation to the BASS
(LOWER) tone. (page EN-6)
 Damper noise Off, On D Enables/disables damper noise
Default: On output. (page EN-8)
 Select layer tone Off, On D Enables or disables layering. • BASS (LOWER) cannot be layered with
Default: Off (page EN-6) another tone.
• Configuring of layering settings is not
supported for recording function Track 2
recording.
 Duet mode Off, On, Pan D Enables or disables the Duet Mode. • When Pan is specified, Reverb and Chorus
Default: Off (page EN-10) effects cannot be applied.

EN-22
 Configuring Settings with the Keyboard

■ Song/Metronome
Operation
Type
Parameter Settings Description Remarks
(page
EN-19)
 Music Library 1 to 70 B Selects a Music Library tune. • This setting cannot be changed while
song select Default: 1 C (page EN-15) recording.
(MUSIC
LIBRARY
SELECT)
 Tempo 20 to 255 B Specifies the tempo of Concert Play • During recording, pressing + and – at the
(TEMPO) Default: 120 C Lesson Mode songs, Music Library same time sets a value of 120.
songs, the metronome, recording • The tempo cannot be changed while in the
and playback, etc. (page EN-9) Concert Play LISTEN Mode or PLAY Mode.
 Beat (BEAT) 0 to 9 C Specifies the metronome beat.
Default: 4 (page EN-9)
 METRONOME – – Enters a setting mode for • The tempo cannot be changed while in the
TEMPO specifying the metronome tempo Concert Play LISTEN Mode or PLAY Mode.
with keyboard keys. Use the 
TEMPO keyboard keys to input a
tempo value. (page EN-9)
 METRONOME – – Enters a setting mode for
BEAT specifying the metronome beat
with keyboard keys. Use the 
BEAT keyboard keys to input a
beat value. (page EN-9)
 CONCERT Play, Stop D Toggles a Concert Play song • This setting cannot be changed while
PLAY a between play and stop. (page recording.
EN-13)
 LISTEN – A Enters the Concert Play Listen • This setting cannot be changed while
Mode. (page EN-13) recording.
 LESSON – A Enters the Concert Play Lesson • This setting cannot be changed while
Mode. (page EN-14) recording.
 PLAY – A Enters the Concert Play Play Mode. • This setting cannot be changed while
(page EN-14) recording.
 CONCERT 1 to 10 B Specifies a Concert Play song • This setting cannot be changed while
PLAY SELECT Default: 1 number. (page EN-12) recording.
(Song)
(SELECT +/–)
 CONCERT 0 to 42 B Sets the volume level of Concert • This setting cannot be changed while
PLAY Default: 32 Play playback. recording.
VOLUME
(VOLUME +/–)
 Music Library 0 to 42 B Sets the volume level of Music • This setting cannot be changed while
volume Default: 42 Library playback. recording.

 Metronome 0 to 42 B Specifies the metronome volume.

volume Default: 36 (page EN-10)

EN-23
Configuring Settings with the Keyboard

■ Keyboard
Operation Type
Parameter Settings Description Remarks
(page EN-19)
 Temperament Temperament: <Selecting a Temperament> You can change the <Temperaments>
 Temperament 0 to 16 While holding down the scale (tuning 0: Equal /
Base note Base note: FUNCTION button, press the system) of the 1: Pure Major /
 Temperament C to B applicable keyboard keys as described keyboard from 2: Pure Minor /
select below. standard equal 3: Pythagorean /
Defaults: 1. Press the  Temperament temperament to 4: Kirnberger 3 /
Temperament: 0 keyboard key. another tuning that 5: Werckmeister /
(Equal Temperament) 2. Use the  Temperament Select is more suitable for 6: Mean-Tone /
Base note: C keyboard keys to select the desired playing Indian 7: Rast /
temperament. music, Arabic 8: Bayati /
• If you want to advance directly music, classical 9: Hijaz /
base note selection from here, pieces, etc. 10: Saba /
release the FUNCTION button • When you select 11: Dashti /
and continue with the procedure any temperament 12: Chahargah /
below. other than “Equal”, 13: Segah /
you must also 14: Gurjari Todi /
<Selecting a Base Note> configure a base 15: Chandrakauns /
While holding down the note (base note of 16: Charukeshi
FUNCTION button, press the the temperament of
applicable keyboard keys as described the song being
below. performed) setting.
1. Press the  Base Note keyboard • For details about
key. temperament, refer
2. Press the keyboard key of the note to a book that
you want to specify as the base covers music
note. You can specify any note in theory.
any register.
 Touch response Off, 1 to 3 D Specifies the • Each press of the keyboard key
Default: 2 relative touch of the causes it to beep the number of
keyboard keys. times shown below to indicate
Setting a smaller the current setting.
value causes lighter Once (long): Off
touch to produce Once (short): 1
more powerful Twice: 2
sound. Three times: 3
 Transpose –12 to 0 to 12 B Raises or lowers the • The transpose setting cannot be
Default: 0 tuning of the Digital changed while in the Duet Mode.
Piano in semitone • Raising the key of the Digital
steps. Piano can cause notes the highest
part of the range to become
distorted.
 A-tuning 415.5Hz to 440.0Hz B Raises or lowers the • To toggle between the two
to 465.9Hz overall pitch of the settings below, hold down the
Default: 440.0Hz Digital Piano in FUNCTION button and press the
0.1Hz steps from A-tuning keyboard keys (+ and –)
the standard pitch at the same time.
of A4 = 440.0Hz. 440.0 Hz (1 beep)
442.0 Hz (2 beeps)
 Octave shift –2 to 0 to 2 B Change the range of
Default: 0 the keyboard in
octave units.
 Keyboard 0 to 42 B Adjusts the volume
volume Default: 42 levels of all parts
that are controlled
by the keyboard.

EN-24
 Configuring Settings with the Keyboard

■ MIDI and Other Settings

Operation
Type
Parameter Settings Description Remarks
(page
EN-19)
 USB flash drive MIDI, Storage D The Digital Piano enters MIDI • After this setting is changed to Storage, the
mode Default: MIDI mode automatically when it is GRAND PIANO, E.PIANO 1, and R lamps
connected to a computer by a USB will flash, and all other lamps will be unlit.
cable. Select storage when saving • All Digital Piano operations are disabled at
Recorder memory song data to a this time.
computer or when loading • Each press of the USB device mode
computer song data to Digital keyboard key toggles between the MIDI
Piano memory. (page EN-28) and storage modes.
 Local control Off, On D Selecting “Off” for Local control
Default: On cuts off the Digital Piano’s sound
source, so no sound is produced by
the Digital Piano when keys are
pressed.
 Send channel 1 to 16 B Specifies one of the MIDI channels
Default: 1 (1 through 16) as the Send channel,
which is used for sending MIDI
messages to an external device.
 Operation tone Off, On D Selecting “Off” disables sounding • This setting is retained even when the
Default: On of the operation tone whenever a Digital Piano is turned off.
keyboard key is pressed while the
FUNCTION is depressed.
 Panel lock Off, On D Selecting “On” for this setting locks
Default: Off the Digital Piano’s buttons (except
for the P (Power) button and the
buttons required for unlock), so no
operation can be performed.
Turn on operation lock when you
want to protect against
unintentional button operations.
 Auto Resume Off, On D When On is selected for this • The settings below are not remembered,
Default: Off setting, the Digital Piano will even if Auto Resume is enabled.
remember its settings whenever it Duet Mode
is turned off, and restore them Layered
when power is turned on again. Tune LR (part) setting
When Off is selected, settings are
Local Control
reset to their initial defaults
whenever the Digital Piano is
turned on.

EN-25
 Configuring Settings with the Keyboard

Linking with an Application

(APP Function)
Your Digital Piano can connect with a smartphone,
tablet, or other smart device. A special app is available
to display music scores and a piano roll display to
support your practice.

Downloading the Special App

Go to the website below to download the app and
install it on your smart device.
https://support.casio.com/global/en/emi/manual/PX-765/

EN-26
 Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play Connecting the Digital Piano
data from the Digital Piano to commercially available to Your Computer
music software running on your computer, or you can
send MIDI data from your computer to the Digital IMPORTANT!
Piano for playback.
• Make sure you follow the steps of the procedure
below exactly. Connecting incorrectly can make data
Minimum Computer System send and receive impossible.

Requirements 1. Turn off the Digital Piano and then start up

your computer.
The following shows the minimum computer system
• Do not start up the music software on your computer
requirements for sending and receiving MIDI data. yet!
Check to make sure that your computer complies with
these requirements before connecting the Digital Piano 2. After starting up your computer, use a
to it. commercially available USB cable to connect
 Operating System it to the Digital Piano.
Windows 8.1 *1 • Use a USB A-B connector type USB cable.
Windows 10 *2 Digital Piano USB port
Windows 11
macOS (OS X/Mac OS X) 10.13, 10.14, 10.15, 11.0, 12.0 USB cable
(USB A-B connector type)
*1: Windows 8.1 (32-bit, 64-bit)
*2: Windows 10 (32-bit, 64-bit)
A connector B connector
 USB port

NOTE Computer USB port

• For the latest OS support information, please see the

“Operating System Compatibility (Windows/macOS)”
section on our website below.
3. Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
https://support.casio.com/global/en/emi/manual/PX-765/
Piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.

4. Start up commercially available music

software on your computer.

5. Configure the music software settings to

select “CASIO USB-MIDI” as the MIDI device.
• For information about how to select the MIDI device,
see the user documentation that comes with the
music software you are using.

IMPORTANT!
• Be sure to turn on the Digital Piano first before
starting up your computer’s music software.

NOTE
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when
you turn off your computer and/or Digital Piano.
• For detailed specifications and connections that
apply to MIDI data send and receive by this Digital
Piano, see the latest support information provided
by the website at the following URL.
https://support.casio.com/global/en/emi/manual/PX-765/

EN-27
 Connecting to a Computer

2. Change the Digital Piano’s USB device mode

Using MIDI to storage.

What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.

NOTE
• For detailed information about MIDI
Implementation, visit the CASIO website at:
https://support.casio.com/global/en/emi/manual/PX-765/ • While holding down the FUNCTION button, press
the keyboard key that corresponds to the USB device
See “Send channel” and “Local control” on page mode.
EN-25. • After this setting is changed, the GRAND PIANO,
E.PIANO 1, R lamps flash, and all other lamps are
unlit.
Transferring Song Data with a • See “USB flash drive mode” on page EN-25 for more
information.
Computer
Use the procedures in this section to transfer Recorder
3. On your computer, perform the required
operation to display your computer’s storage
memory data to a computer for storage, and to load
songs to user song memory (Music Library 61 to 70). devices.
If your computer is
IMPORTANT! running this operating Do this:
• Turning off the Digital Piano while data is being system:
saved or loaded can cause all data currently stored Windows 8.1, Open any folder. On the
in Digital Piano memory (recorded songs, etc.) to be Windows 10, navigation window, click “PC”.
deleted. Take care so power is not turned off Windows 11
accidentally during data save and load operations. If macOS Skip step 3 and double-click
data is deleted, it will take longer than normal for the “PIANO” on your Mac desktop.
Digital Piano to power up the next time you turn it on
(page EN-4). • The memory of this Digital Piano will appear as
“PIANO” under “Devices with Removable Storage”.
1. Perform steps 1 through 3 of the procedure
under “Connecting the Digital Piano to Your
Computer” on page EN-27.

EN-28
 Connecting to a Computer

4. Double-click “PIANO”.
IMPORTANT!
• “PIANO” contains folders named “MUSICLIB” and
“RECORDER”.
• The initial default configuration for Windows 8.1,
Windows 10, and Windows 11 is to hide file name
Digital Piano memory extensions. Perform one of the following operations
\PIANO on your computer to show file name extensions.
\MUSICLIB .MID files or .CM2 files
• To show file name extensions under Windows 8.1,
Windows 10, or Windows 11
\61
1. Open any folder.
\62
2. Click the [View] menu and then select the [File name
\70 extensions] check box in the [Show/hide] group.

■ To load a song into user song memory

\RECORDER .CSR file (only one song data) (Music Library 61 to 70)
1. Open the MUSICLIB folder.
• To transfer a user song to the Digital Piano from your 2. Copy the song file (.MID or .CM2) to the number-
computer, open the “MUSICLIB” folder and put the
song into one of the numbered subfolders (61
named subfolder (61 to 70) whose name matches the
through 70). Each subfolder corresponds to a Music number of the Music Library location to which you
Library number: Subfolder 61 to Music Library 61, want to load the song.
and so on. • If there are two files with the filename extensions
• For example, storing song data in sub-folder 61 will .MID and .CM2 in the MUSICLIB folder, only the
cause it to be treated as Music Library song 61 data by .MID data will be loaded into user song memory.
the Digital Piano.
• To store Recorder song (.CSR) data on a computer, ■ To transfer Recorder memory data between
copy the .CSR file in the RECORDER folder to the
computer. To return saved song (.CSR) data to Digital the Digital Piano and your computer
Piano memory, copy it to the RECORDER folder. To transfer the Digital Piano’s current Recorder
memory data to your computer, copy the contents of
Folder
Data Type File Name and Extension* the RECORDER folder to your computer.
Name
To return Recorder data you previously saved to your
User songs MUSICLIB .MID: SMF format data
(format 0/1)
computer back to Recorder memory, copy it back to the
.CM2: CASIO original RECORDER folder (and replace the current
format data RECORDER folder contents).
Recorder RECORDER BIDREC01.CSR: CASIO
memory data original format data

* Before starting a store or load operation, first check

the file name extension to ensure it matches the ones
shown in this column.
In the case of a song recorded with the Digital
Piano’s recorder function, change its file name to one
of the names and extensions shown in this column.

EN-29
Connecting to a Computer

5. After the file copy operation is complete,

return the USB device mode to MIDI.
• If you are using a Macintosh, perform the eject
operation (drag them to the trash can).
• While holding down the FUNCTION button, press
the applicable keyboard key. See “USB flash drive
mode” on page EN-25 for more information.
• Returning the USB device mode to MIDI will load the
contents of MUSICLIB into user song memory and
the contents of RECORDER into Recorder memory.

IMPORTANT!
• A data conversion error is indicated when the
GRAND PIANO, E.PIANO 1, L/R lamps are all lit,
and all other lamps are unlit.

Copyrights
The rights of creators and copyright holders of music,
images, computer programs, databases, and other
data are protected by copyright laws. You are allowed
to reproduce such works for personal or non-
commercial use only. For any other purpose, all
reproduction (including data format conversion),
modification, transfer of reproductions, distribution
over a network, or any other use without permission
of the copyright holder exposes you to claims for
damages and criminal prosecution for copyright
infringement and violation of the author’s personal
rights. Be sure to reproduce and otherwise use
copyrighted works only in accordance with applicable
copyright laws.

EN-30
 Getting Ready
*CAUTION
Assembling the Stand • To assemble the stand, at least two persons should
work together on a flat surface.
PREPARATION
• Take care that you do not pinch your fingers
• Before starting assembly, check to make sure that
between parts when assembling them.
you have all the parts shown below.
• Spread felt or some other type of cloth under the
• This stand does not include any of the tools required bench to avoid direct contact between the rubber at
for assembly. It is up to you to prepare a large the tips of the legs and the floor surface. Direct
Philips head (+) screwdriver for assembly. contact between the rubber and flooring can cause
discoloration, marring, or other damage to the
flooring.
• When placing the Digital Piano on the floor, be sure
B to place it on something soft (a blanket, cushion, etc.)
Do not place the Digital Piano directly onto the floor.

A D

NOTE
• Be sure to follow the proper procedure when
assembling the stand.

E H PREPARATION
• Pull the pedal unit cable out from the pedal unit .
F I D
G J

 Side panel ........................... ×1  Screws ................................ ×4

 Side panel ........................... ×1  Brackets .............................. ×2
 Back board .......................... ×1  Screw caps ......................... ×2
 Pedal unit ............................ ×1  Screw caps ......................... ×6
 Screws ................................ ×2  Clips .................................... ×2

IMPORTANT!
• Do not remove the tape securing the keyboard cover
in place until assembly is complete. Removing the
tape can cause the keyboard cover to open and
close during assembly, creating the risk of personal
injury to your hands and fingers.
• Do not use any screws other than those that come
with the stand. Doing so risks damage to the stand
and/or Digital Piano.
• You can find the screws in a plastic bag inside of the
packing material.
• If anything is missing or damaged, contact your local
CASIO service provider.

EN-31
Getting Ready

1. Remove the four screws (two on each end)

from back board . 3-1. If you plan to locate the piano and stand
where it is not against a wall, you need to
C extend the anti-tip brackets at the base of
side panels  and . Remove the two
screws (one on the outside of each side
panel) that hold the brackets, and then slide
the brackets as shown in the illustration. After
extending the anti-tip brackets, reinstall the
screws that secure them in place, but do not
tighten the screws fully at this time.
2. Attach side panels  and  to back board
[Inside of side panels]
. Secure side panels  and  to the back
board  using the screws you removed in
step 1.
• Attach the side panels so the side of the back board 
where the joint connectors are inserted is facing
towards the back of the stand.
• If you have trouble inserting a screw into a joint
connector screw hole, use a screwdriver to adjust the
joint connector by rotating it.

IMPORTANT!
Joint connectors
• When inserting a screw into a
joint connector, keep your
finger on the joint connector
hole on the back of back board
 to make sure the joint
connector does not come out
of the hole. 3-2. If you plan to locate the piano and stand
against a wall, loosen the two screws (one on
B A the outside of each side panel) that secure
the brackets. You do not need to remove the
screws in this case.
• In this case, you do not need to remove the screws.
Just loosen them.

C C

EN-32
 Getting Ready

4. Insert angle brackets  into the gap between 7. While pressing the pedal unit down towards
the anti-tipping bracket and the side panel. the floor, securely tighten the screws you
G partially tightened in step 5.

8. From the back of the assembled stand, slide

5. From the outside of side panels  and ,
the piano into the grooves of side panel 
temporarily tighten the screws you loosened
and side panel .
in step 3, above.
• Note that there is nothing anchoring the piano to the
stand at this time. Take care to ensure that the piano
does not fall off the stand.

6. Place the two ends of the pedal unit  onto

the  brackets and secure them with 
screws. Finish with  screw caps.

H H
E D E

9. Use  screws to secure the piano to the

stand from both the front and the back.

[Front] [Rear]

EN-33
Getting Ready

10. After checking to make sure the six screws 2. Insert the plug of the AC adaptor that comes
that secure side panels  and  are fully with the Digital Piano into its power terminal
tightened, cover the heads of the screws with (12VDC).
screw caps . AC adaptor plug

Supplied AC adaptor

3. Plug the power cord of the AC adaptor that

comes with the Digital Piano into a household
power outlet as shown in the illustration
below.
To connect the cable
Household power outlet

1. Making sure that the pedal unit cable plug is

oriented as shown in the illustration below, AC adaptor
plug it into the pedal connector on the bottom
of the piano.
a. Press the plug fully into the connector as far as it will Power cord
go.
b. Use the clips  to secure the pedal cable to two
locations on side panel .
To install the music stand
a.
1. Slide the music stand under the two bolts on
the top of the piano and then tighten the bolts.

b.

EN-34
 Getting Ready

Removing the Protective Tape Connecting Headphones

from the Keyboard Front
Protective tape is affixed to the front edges of the PHONES/OUTPUT jacks

keyboard keys to protect them during shipment.

Remove the protective tape before using the Digital
Piano.

Stereo standard plug

• Peel off the tape by pulling carefully towards you as
shown in the illustration. Connect commercially available headphones to the
PHONES/OUTPUT jacks. Connecting headphones to
either of the PHONES/OUTPUT jack cuts off output to
the speakers, which means you can practice even late at
night without bothering others. To protect your
hearing, make sure that you do not set the volume level
too high when using headphones.
• If some keys seem to be raised up after you remove
the tape, press down to return them to their normal NOTE
positions.
• Be sure to push the headphones plug into the
PHONES/OUTPUT jacks as far as it will go. If you
don’t, you may hear sound from only one side of the
headphones.
• If the plug of the headphones you are using does not
match the PHONES/OUTPUT jacks, use the
applicable commercially available adaptor plug.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.

EN-35
Getting Ready

Connecting Audio Equipment Bundled and Optional

or an Amplifier Accessories
You can connect audio equipment or a music amplifier Use only accessories that are specified for use with this
to the Digital Piano and then play through external Digital Piano.
speakers for more powerful volume and better sound Use of unauthorized accessories creates the risk of fire,
quality. electric shock, and personal injury.

IMPORTANT! NOTE
• Whenever connecting a device to the Digital Piano, • You can get information about accessories that are
first use the VOLUME controller to set the volume to sold separately for this product from the CASIO
a low level. After connecting, you can adjust the catalog available from your retailer, and from the
volume to the level you want. CASIO website at the following URL.
• Whenever you connect any device to the Digital https://support.casio.com/global/en/emi/manual/PX-765/
Piano, be sure to read the user documentation that
comes with the device.
To either of the Digital Piano’s PHONES/OUTPUT jack

Pin plug
Audio amplifier AUX IN jack, etc.

RIGHT (Red)
LEFT (White)
Stereo standard plug
Guitar amplifier
Keyboard amplifier, etc.
Pin plug (white)
INPUT 1

INPUT 2
Pin plug (red)
Pin jack Standard plug

Connecting Audio Equipment (Figure )

Use commercially available connecting cords
(Standard Plug × 1, Pin Plugs × 2) to connect as shown
in Figure . Make sure that the end of the cord that
you connect to the Digital Piano is a stereo standard
plug. A monaural standard plug will result in output of
only one of the two stereo channels. Normally, you
should set the input selector of the audio equipment to
the terminal where the Digital Piano is connected
(AUX IN, etc.) Adjust volume using the Digital Piano’s
VOLUME controller.

Connecting a Music Amplifier (Figure )

Connect the connecting cord* to one of the types of
amplifiers shown in Figure .
Adjust volume using the Digital Piano’s VOLUME
controller.
* Digital Piano: Stereo standard plug
Amplifier : Inputs signals for the left and right
channels. Not connecting either plug
will result in output of only one of the
two stereo channels.

EN-36
 Reference
Troubleshooting
See
Problem Action
Page
No sound is produced when I 1. Rotate the VOLUME controller more towards “MAX”.  EN-5
press a keyboard key. 2. Disconnect whatever is connected to the PHONES/OUTPUT jacks.  EN-35
3. Turn on the Local control setting.  EN-25
The pitch of the Digital Piano is 1. Change the transpose setting to “0”. Or turn power off and then back on.  EN-24
off. 2. Change the tuning setting to 440.0 Hz. Or turn power off and then back on.  EN-24
3. Change the octave shift setting to 0.  EN-24
4. Change the temperament setting to “0: Equal”, which is the standard modern  EN-24
tuning.
Nothing happens when I press Check the orientation of the pedal unit plug and makes sure it is inserted as far  EN-34
a pedal. as it goes.
Tones and/or effects sound Turn off Auto Resume, and then turn power off and then back on again.  EN-25
strange. Turning power off and
then back on again does not
eliminate the problem.
Example: Note intensity does not
change even though I alter key
pressure.
I cannot transfer data after 1. Check to make sure that the USB cable is connected to the Digital Piano and  EN-27
connecting the Digital Piano to computer, and that the correct device is selected with your computer’s music
a computer. software.
2. Turn off the Digital Piano and then exit the music software on your computer.
Next, turn the Digital Piano back on and then restart the music software on
your computer.
It takes a long time before I can It takes about 20 seconds after you turn on power to perform the memory format  EN-28
use the Digital Piano after I turn operation. Wait until the format operation is complete. Note that you should take
it on. care to avoid turning off the Digital Piano while a data transfer operation with a
computer is in progress.
A tone’s quality and volume This is an unavoidable result of the digital sampling process,* and does not indicate
sounds slightly different malfunction.
depending where it is played on * Multiple digital samples are taken for the low range, middle range, and high range of the
the keyboard. original musical instrument. Because of this, there may be very slight differences in tonal
quality and volume between sample ranges.
When I press a button, the note This happens when the sounds of multiple parts are sounding at the same time while using
that is sounding cuts out layer, using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button
momentarily or there is a slight when one of these conditions exists will cause the effect setting that is built into the tone to
change in how effects are change automatically, which causes notes to cut out momentarily or causes a slight change
applied. in how effects are being applied.
I need to reset all Digital Piano Hold down the FUNCTION, MIDI REC and E.PIANO 1 buttons, and press the power button
data and settings to their initial to turn on power.
defaults.
I need to reset a specific setting Hold down the FUNCTION button and press the + and – keyboard keys of the setting at the
to its initial default. same time.

EN-37
Reference

Product Specifications
Model PX-765BK
Keyboard 88-key piano keyboard, with Touch Response
Maximum Polyphony 128 notes
Tone 19 types
• Layer (excluding bass tones)
Acoustic Simulator Damper Resonance (Damper Noise on/off), Hammer Response
Effects Brilliance (–3 to 0 to 3), Reverb (4 types), Chorus (4 types), DSP
Metronome • Beats: 0 to 9
• Tempo range: 20 to 255
Duet Mode Adjustable tone range (–2 to 2 octaves)
Concert Play • Songs: 10
• Song volume: Adjustable
• Part On/Off: L, R (Lesson Mode only)
• 3 Modes: LISTEN, LESSON, PLAY
Music Library • Songs: 60; 10 download songs (Up to approximately 90 KB per song, up to approximately 900 KB/10 songs total)*
* Based on 1 KB = 1024 bytes
• Song volume: Adjustable
• Part On/Off: L, R
Recorder MIDI Recorder
• Modes: Real-time recording, playback
• Songs: 1
• Tracks: 2
• Capacity: Approximately 5,000 notes total
• Recording storage: Built-in flash memory
Pedals Damper (half-pedal supported), sostenuto, soft
Other Functions • Touch Response: 3 levels, Off
• Transpose: 2 octaves (–12 to 0 to +12)
• Tuning: 415.5 Hz to 440.0 Hz to 465.9 Hz (0.1 Hz steps)
• Temperament: Equal + 16 other types
• Octave Shift: 4 octaves (–2 to 0 to +2)
• Panel Lock
MIDI 16-channel multi-timbre receive
USB Memory –
Input/Output • PHONES/OUTPUT jacks: Stereo standard jacks × 2
Terminals • AC Adaptor Terminal: 12 VDC
• USB port: Type B
• Pedal connector
Speakers φ12 cm × 2 (Output: 8W + 8W)
Power Requirements AC adaptor: AD-A12150LW
• Auto Power Off: Approximately 4 hours; Can be disabled.
Power Consumption 12V = 18W
Dimensions Piano and Stand: 139.1(W) × 29.9(D) × 79.8(H) cm (54 13/16 × 11 3/4 × 31 7/16 inches)
Weight Piano and Stand: Approximately 31.5 kg (69.4 lbs)

• Specifications and designs are subject to change without notice.

EN-38
 Appendix
Song No. Song Name
Tone List 22 Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]
23 Le Coucou
Tone Name Program Change Bank Select MSB 24 Gavotte
GRAND PIANO CONCERT 0 0 25 Sonatina Op.36-1 1st Mov.
GRAND PIANO MELLOW 1 0 26 Sonatine Op.20-1 1st Mov.
GRAND PIANO BRIGHT 2 0 27 Sonate K.545 1st Mov.
MODERN PIANO 3 0 28 Sonate K.331 3rd Mov. “Turkish March”
ROCK PIANO 4 0 29 Rondo K.485
JAZZ PIANO 5 0 30 Für Elise
ELEC.PIANO 1 6 0 31 Marcia alla Turca
ELEC.PIANO 2 7 0 32 Sonate Op.13 “Pathétique” 1st Mov.
FM E.PIANO 8 0 33 Sonate Op.13 “Pathétique” 2nd Mov.
60’S E.PIANO 9 0 34 Sonate Op.13 “Pathétique” 3rd Mov.
HARPSICHORD 10 0 35 Sonate Op.27-2 “Moonlight” 1st Mov.
VIBRAPHONE 11 0 36 Rhapsodie 2
STRINGS 1 12 0 37 Waltz Op.39-15 (Duet)
STRINGS 2 13 0 38 Liebesträume 3
PIPE ORGAN 14 0 39 Blumenlied
JAZZ ORGAN 15 0 40 La Prière d’une Vierge
ELEC.ORGAN 1 16 0 41 Csikos Post
ELEC.ORGAN 2 17 0 42 Humoresque Op.101-7
BASS (LOWER) 18 0 43 Melodie [Lyrische Stücke Heft 2]
44 Sicilienne Op.78
45 Berceuse [Dolly] (Duet)
Concert Play List 46 Arabesque 1
47 La Fille aux Cheveux de Lin [Préludes]
Song No. Song Name
48 Passepied [Suite bergamasque]
1 Je Te Veux
49 Gymnopédie 1
2 Vltava (Má vlast)
50 Je Te Veux
3 Canon
51 Salut d’Amour
4 Tableaux d’Une Exposition “Promenade”
52 The Entertainer
5 Piano Concerto No.20 K.466 2nd Mov.
53 Maple Leaf Rag
6 Polovetzian Dance (Prince Igor)
54 L’arabesque [25 Etüden Op.100]
7 Sonate K.331 1st Mov.
55 La Styrienne [25 Etüden Op.100]
8 Violin Concerto 1st Mov.
56 Ave Maria [25 Etüden Op.100]
9 Jesus, Bleibet Meine Freude
57 Le retour [25 Etüden Op.100]
10 Melody In F
58 La chevaleresque [25 Etüden Op.100]
59 No.13 [Études de Mécanisme Op.849]
60 No.26 [Études de Mécanisme Op.849]
Music Library List
Song No. Song Name
01 Nocturne Op.9-2
02 Fantaisie-Impromptu Op.66
03 Étude Op.10-3 “Chanson de l’adieu”
04 Étude Op.10-5 “Black Keys”
05 Étude Op.10-12 “Revolutionary”
06 Étude Op.25-9 “Butterflies”
07 Prélude Op.28-7
08 Valse Op.64-1 “Petit Chien”
09 Valse Op.64-2
10 Moments Musicaux 3
11 Impromptu Op.90-2
12 Marche Militaire 1 (Duet)
13 Frühlingslied [Lieder Ohne Worte Heft 5]
14 Fröhlicher Landmann [Album für die Jugend]
15 Von fremden Ländern und Menschen [Kinderszenen]
16 Träumerei [Kinderszenen]
17 Tambourin
Menuet BWV Anh.114
18
[Clavierbüchlein der Anna Magdalena Bach]
19 Inventio 1 BWV 772
20 Inventio 8 BWV 779
21 Inventio 13 BWV 784

A-1
Model PX-765 Version : 1.0

MIDI Implementation Chart

Function Transmitted Recognized Remarks

Basic Default 1 - 16 1 - 16
Channel Changed 1 - 16 1 - 16

Default Mode 3 Mode 3

Mode Messages X X
Altered

Note 0 - 127 0 - 127

Number True voice 0 - 127*1 *1 : Depends on tone

Note ON O 9nH v = 1 - 127 O 9nH v = 1 - 127

Velocity
Note OFF X 8nH v = 64 X 9nH v = 0, 8nH v = 0 - 127

After Key’s X X
Touch Ch’s X O

Pitch Bender X O
0, 32 O O Bank select
1 X O Modulation
5 X O Portamento Time
6, 38 X O Data entry LSB, MSB*2
7 O O Volume
10 X O Pan
11 X O Expression
16 X O DSP Parameter0*2
17 X O DSP Parameter1*2
18 X O DSP Parameter2*2
Control 19 X O DSP Parameter3*2
64 O O Damper
Change 65 X O Portamento Switch
66 O O Sostenuto
67 O O Soft pedal
 76 X O Vibrato rate
77 X O Vibrato depth
78 X O Vibrato delay
80 X O DSP Parameter4*2
81 X O DSP Parameter5*2
82 X O DSP Parameter6*2
83 X O DSP Parameter7*2
84 X O Portamento Control
88 O O High resolution velocity prefix*3
91 X O Reverb send*4
93 O O Chorus send
100, 101 X O RPN LSB, MSB*2
120 X O All sound off
121 O O Reset all controller

Program O O
Change :True # 0 - 127

System Exclusive O O *2

System : Song Pos X X

Common : Song Sel X X
: Tune X X

System : Clock X X
Real Time : Commands O X

: Local ON/OFF X X
Aux
: All notes OFF O O
Messages
: Active Sense X O
: Reset X X

*2 :For details, see MIDI Implementation at https://support.casio.com/global/en/emi/manual/PX-765/

Remarks *3 :Note on only
*4 :This Instrument treats a hall simulator as a reverb.

Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO O : Yes

Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO X : No
MA2207-A