Transfer Function

Industrial
Interface
ISO Certified Manufacturing Facility
UL G
ROU
P OF
COM
PAN
IES
Modular Wiring Solution Available For Leading Automation Gaints
• ABB
• Emerson
• Fuji
• Hitachi
Conventional (Manual) Wiring Modular Wiring • Honeywell
• Mitsubishi
Advantages of Modular Wiring Solution
• NPCIL
• Rockwell
• Schneider
• Siemens
• Supcon
• Valmet
• Yokogawa
Industrial Interface
UL Automation is global Indian manufacturing company having state
of art Electronics Manufacturing facility at Pune, India. UL continued
to support Automation OEM's in domestic as well as International
market in all major verticals either direct or indirect such as Power
Plant, Oil & Gas, Petrochemical, Refineries, Water treatment, BOP,
telecom, Genset, Metro & Railways, F&B, Automotive SPM, machine
manufacturers & Process Plants such as Cement, Steel, Paper, Metal
etc. and rapidly expanding operation across the country, head office
is in Pune India & sales office at all major metro cities across India.
Machines & Systems in automation field are increasing with
complexities and evolving technologies. While it is challenge to
extend the skills about new technologies, it is even greater challenge
in the wiring between Controllers IO's and Field devices, sensor
/actuators. UL has been at the forefront of addressing the issue over
Index last 20 years, not only to ensure the error free marshalling wiring but
through simplified system cabling by means of Modular wiring
solutions.
Standard Relay Modules 4-13
Our Expertise
Solid State Relay Modules 14-15
The UL modular wiring solutions significantly reduce the number of
Slim Relay Modules 16 multiple components required in marshalling cabinets. It is Safe and
excludes the risk of error, Elimination of wiring error during
Modular Wiring Solutions 17-27 installation & testing. Fast, thanks to multichannel interface module &
prefabricated system means real saving in time and 15 times faster
Special DI LFD Module 28 than conventional point to point wiring. Needless to mention it also
drastically reducing engineering time and cost. In this way UL has
Signal Isolators and Multipliers 29 been leading contributor to automation industry in optimizing
solution and reducing the cost while reliably guaranteeing the safe
Passive Interface Modules 30-32 commissioning of systems. UL modular wiring solutions are virtually
available for all PLC & DCS IO cards. All automation giants made UL
CNC Interface Modules 33
as their preferred value added partners for their field Interfacing and
Prefabricated Cables 34
connectivity needs.
An Ideal alternative to traditional point to point single core cabling,
Panel Accessories Modules 35-38 harnessed multicore system cables with corresponding connectors
on both sides offers considerable ease to engineers all over the
Fiber Optic Patch Panels and Patch Cables 39-43
automation industry. The few compact interface boards or field
Customised Solutions 44-46
interfacing modules FIMs and System cables are been popularly
named by UL, which is what is needed to be selected by engineer
and the large control systems with thousand of IOs can be wired
quickly.
With the use of additional intelligence & few components on board,
the system can be implemented with redundant IO, autotest IO,
Isolation short circuit, current limiting and surge protection. With
experience of dealing with thousands of engineers and Automation
corporate from all over the world, every engineering aspect
conceivable in wiring of control system is brought on boards. And
with emergence of every new controller and concept in the industry,
ULs strong application team expertise is ever hungry to fulfill the
same.
In our aspiration in making the whole control system wiring modular.
UL has now entered in generation NEXT range of module. We now
offer modules with 3 way Isolation. Modbus connectivity for quick
diagnosis in controller, line fault detection etc. to ease engineering
requirements of our esteemed customers.
www.ulepl.com 3
Standard Relay Modules
DC Relay Module with 1 C/O Contact
Features:
— Fast traceability of signal status through
Channel-wise LED indications.
— Plug In Type Relays.
— Interchangeable Looping at Input side using
jumpers.
— Reduces Installation & commissioning time.
— Compact in design. H
— Universal Rail mounting. L W
Technical Data:
Input Data Relay Data
Operating Voltage 12VDC 24VDC Relay Make Omron, G2RL Series or Equivalent
Rated Current (mA) 40 25 Contact Type 1 Change Over
Input Status LED/Ch Green Approvals
Back emf Free-wheeling Diode
Protection/Channel
Positive/Negative User Selectable using Relay Socket
Looping Jumpers Rated values 5A AC/ DC, 250V rms
Dielectric strength 2000V AC rms for 1 min.
Output Data Insulation resistance 1000MΩ at 500V DC
Contact Configuration SPDT, Potential Free Standard conformity EN 60947-5-1/ IEC 947-5-1
Contact Current Rating 12 A at 250 VAC Ambient temperature -45 to +120˚C
12 A at 24 VDC
Max. switching voltage 440 VAC,300 VDC General Data
Mechanical operation 18,000 /hr Ambient temperature 0°C to +60°C
Electrical operation 1,800 /hr Relative humidity Max. 90% (Non-condensing)
Dielectric strength 1,000V AC, 50/60Hz. 1 min. PCB design UL standard ANSI IPC 2221, 2222
between Contacts & MIL 275B
Screw- Terminals UL, CSA Standard & CE standard
Termination Data
Mounting Din Rail Mountable
Terminal Type Screw Terminal
Approval
Nominal Current 24A
Cross-section 2.5mm2
Ordering details
Rated Voltage 250V
Channel Part Code Ordering Code Size in mm
Rated surge Voltage 4KV (L x W)
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 1 UL24D01-COB 086030100004 25 x 90
[mm²/ mm²] AWG
2 UL24D02-COB 086030200004 42 x 90
Stripping Length 8mm
4 UL24D04-COB 086030400004 74 x 90
Type of Insulation PA/ I
material 8 UL24D08-COB-V1 086010100002 134 x 90
Tightening torque 0.6 Nm Max. 16 UL24D16-COB-V2 086010200016 260 x 90
Note: •Relay Coil Voltage with 48VDC,110VDC are available on request.

• Other option available in Relay modules such as
1) Relay module with common –ve or common +ve looping only
2) With Normally Open contacts
3) Wetted contacts or Pot free /Wetted selectable.
www.ulepl.com 4
DC Relay Module, 1 C/O Contact with
fuse in each contact
Features:
jumpers.
— Reduces Installation & commissioning time. H
L
— Compact in design. W
— Universal Rail mounting.
Technical Data:
Protection/Channel
Looping Jumpers
Rated values 5A AC/ DC, 250V rms
Output Data
Insulation resistance 1000MΩ at 500V DC
Contact Configuration SPDT, Potential Free
Standard conformity EN 60947-5-1/ IEC 947-5-1
Contact Current Rating 12 A at 250 VAC
Ambient temperature -45 to +120˚C
12 A at 24 VDC
Max. switching voltage 440 VAC,300 VDC
General Data
Mechanical operation 18,000 /hr
Ambient temperature 0°C to +60°C
Electrical operation 1,800 /hr
Relative humidity Max. 90% (Non-condensing)
Dielectric strength 1,000V AC, 50/60Hz. 1 min.
between Contacts PCB design UL standard ANSI IPC 2221, 2222
& MIL 275B
Protection Fuse in each contacts
Termination Data
Approval
Nominal Current 24A
Ordering details
Rated Voltage 250V (L x W)
Rated surge Voltage 4KV 2 UL24D02-OF-COB On request 48 x 90
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 4 UL24D04-OF-COB 086030400014 79x126
[mm²/ mm²] AWG
8 UL24D08-OF-COB 086010100007 134 x126
16 UL24D16-OF-COB 086010200007 256x126
material
Tightening torque 0.6 Nm Max.
Note: • Relay Coil Voltage with 48VDC,110VDC are available on request.

4) Fuse rating 2Amp./5Amp.
www.ulepl.com 5
fuse and fuse fail LED in each contact
Features:
jumpers.
L
Technical Data:
Protection/Channel
Contact Configuration SPDT, Potential Free Standard conformity EN 60947-5-1/ IEC 947-5-1
12 A at 24 VDC
Protection Fuse and Fuse Fail Indiction in Screw- Terminals UL, CSA Standard & CE standard
each channel
Termination Data
Approval
Nominal Current 24A
Ordering details
Rated surge Voltage 4KV 2 UL24D02-OFI-COB On request 50 x 90
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 4 UL24D04-OFI-COB 086030400005 87x126
[mm²/ mm²] AWG
8 UL24D08-OFI-COB-V1 086010100001 132x126
16 UL24D16-OFI-COB- 086010200008 262x126
material CMPT-MIN.RES.

www.ulepl.com 6
Features:
jumpers.
Technical Data:
Protection/Channel
Contact Configuration DPDT, Potential Free Standard conformity EN 60947-5-1/ IEC 947-5-1
8 A at 24 VDC
Termination Data Mounting Din Rail Mountable
Terminal Type Screw Terminal Approval
Nominal Current 24A
Rated Voltage 250V Ordering details
Rated surge Voltage 4KV Channel Part Code Ordering Code Size in mm
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 (L x W)
[mm²/ mm²] AWG 1 UL24D01-2COB 086030100003 38x90
Stripping Length 8mm 2 UL24D02-2COB 086030200005 60x90
Type of Insulation PA/ I 4 UL24D04-2COB 086030400008 102 x 90
material
8 UL24D08-2COB-V2 086010100005 140 x 90
16 UL24D16-2COB 086010200005 257x126
www.ulepl.com 7
fuse in each contact
Features:
jumpers.
L
Technical Data:
Protection/Channel
8 A at 30 VDC
Protection Fuse in each contacts Screw- Terminals UL, CSA Standard & CE standard
Termination Data Mounting Din Rail Mountable
Terminal Type Screw Terminal Approval
Nominal Current 24A
Rated Voltage 250V Ordering details
Rated surge Voltage 4KV Channel Part Code Ordering Code Size in mm
[mm²/ mm²] AWG 4 UL24D04-OF-2COB 086030400006 102 x 126
Stripping Length 8mm 8 UL24D08-OF-2COB 086010100013 188 x 126
Type of Insulation PA/ I 16 UL24D16-OF-2COB 086010200002 362 x 126
material

www.ulepl.com 8
fuse and fuse fail LED in each contact
Features:
jumpers.
L
Technical Data:
Protection/Channel
8 A at 30 VDC
Protection Fuse and Fuse fail LED in each Screw- Terminals UL, CSA Standard & CE standard
contacts
Approval
Termination Data
Nominal Current 24A
Ordering details
Rated surge Voltage 4KV 4 UL24D04-OFI-2COB 086030400009 137 x 126
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 8 UL24D08-OFI-2COB 266 x 126
086010100026
[mm²/ mm²] AWG
16 UL24D16-OFI-2COB On request -
material

www.ulepl.com 9
AC Relay Module with 1 C/O Contact
Features:
— Compact in design.
H
L W
Technical Data:
Operating Voltage 24VAC 110VAC 230VAC Relay Make Omron, G2R Series or Equivalent
Rated Current (mA) 58.8 16.2 10.3 Contact Type 1 Change Over
Back emf -
Protection/Channel
Relay Socket
Positive/Negative -
Looping Rated values 5A AC/ DC, 250V rms
Insulation resistance 1000MΩ at 500V DC
Output Data
Contact Configuration SPDT, Potential Free
10 A at 30 VDC
General Data
Mechanical operation 18,000 /hr Relative humidity Max. 90% (Non-condensing)
Electrical operation 1,800 /hr PCB design UL standard ANSI IPC 2221, 2222
Dielectric strength 1,000V AC, 50/60Hz. 1 min. & MIL 275B
between Contacts Screw- Terminals UL, CSA Standard & CE standard
Termination Data Approval
Nominal Current 24A Ordering details for 24VAC, 1C/O Relay Module
Cross-section 2.5mm 2 Channel Part Code Ordering Code Size in mm
(L x W)
Rated Voltage 250V
4 UL24A04-COB 086030400025 77 x 90
Rated surge Voltage 4KV
8 UL24A08-COB 086010100031 134 x 90
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 Ordering details for 110VAC, 1C/O Relay Module
[mm²/ mm²] AWG
4 UL110A04-COB 086030400012 77 x 90
8 UL110A08-COB 086010100010 134 x 90
16 UL110A16-COB 086010200003 267 x 90
material
Ordering details for 230VAC, 1C/O Relay Module
4 UL230A04-COB 086030400011 77 x 90
8 UL230A08-COB 086010100003 134 x 90
16 UL230A16-COB 086010200004 267 x 90
www.ulepl.com 10
Features:
H
L W
Technical Data:
Operating Voltage 24VAC 110VAC 230VAC Relay Make Omron, G2R Series or Equivalent
Rated Current (mA) 58.8 16.2 10.3 Contact Type 2 Change Over
Back emf -
Protection/Channel
Relay Socket
Positive/Negative -

Contact Configuration DPDT, Potential Free
5 A at 30 VDC
General Data
Mechanical operation 18,000 /hr Relative humidity Max. 90% (Non-condensing).
Electrical operation 1,800 /hr PCB design UL standard ANSI IPC 2221, 2222
Dielectric strength 1,000V AC, 50/60Hz. 1 min. & MIL 275B
between Contacts Screw- Terminals UL, CSA Standard & CE standard
Termination Data Approval
Nominal Current 24A Ordering details for 110VAC, 2C/O Relay Module
Cross-section 2.5mm2 Channel Part Code Ordering Code Size in mm
1 UL110A01-2COB On request 38 x 90
4 UL110A04-2COB 086030400035 102 x 90
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
[mm²/ mm²] AWG 6 UL110A08-2COB 086010100012 182 x 90
Stripping Length 8mm Ordering details for 230VAC, 2C/O Relay Module
Type of Insulation PA/ I 1 UL230A01-2COB 086030100002 38 x 90
material 2 UL230A02-2COB 086030200008 60 x 90
Tightening torque 0.6 Nm Max. 4 UL230A04-2COB-V1 086010300001 102 x 90
8 UL230A08-2COB 086010100011 182 x 90
2 UL24A02-2COB 086030200030 62 x 90
4 UL24A04-2COB 086030400038 107 x 90
6 UL24A06-2COB 086030800001 152 x 90
8 UL24A08-2COB 086010100046 192 x 90
www.ulepl.com 11
Features:
H
L W
Technical Data:
Operating Voltage 24VDC Relay Make Omron, MY4 Series or Equivalent
Rated Current (mA) 42 Contact Type 4 Change Over
Protection/Channel
Positive/Negative User Selectable using Jumpers Relay Socket
Contact Configuration 4C/O, Potential Free Standard conformity EN 60947-5-1/ IEC 947-5-1
3 A at 24 VDC
Termination Data
Approval
Nominal Current 24A
Rated Voltage 250V
Ordering details for 24VDC, 4C/O Relay Module
[mm²/ mm²] AWG
2 UL24D02-4COB 086030200006 80 x 90
4 UL24D04-4COB 086030400015 140 x 90
material 8 UL24D08-4COB 086010100016 267 x 90
www.ulepl.com 12
Features:
H
L W
Technical Data:
Operating Voltage 110VAC 230VAC Relay Make Omron, MY4 Series or Equivalent
Rated Current (mA) 16.2 10.3 Contact Type 4 Change Over
Back emf -
Protection/Channel
Positive/Negative - Relay Socket
Contact Configuration 4C/O, Potential Free Standard conformity EN 60947-5-1/ IEC 947-5-1
3 A at 24 VDC
Termination Data
Approval
Nominal Current 24A
Rated Voltage 250V
[mm²/ mm²] AWG
2 UL110A02-4COB 086030200028 80 x 90
4 UL110A04-4COB 086010300005 140 x 90
material 8 UL110A08-4COB 086010100038 271 x 90
Tightening torque 0.6 Nm Max. Ordering details for 230VAC, 4C/O Relay Module
2 UL230A02-4COB 086030200007 80 x 90
4 UL230A04-4COB 086010100039 140 x 90
8 UL230A08-4COB 086010100037 271 x 90
www.ulepl.com 13
Solid State Relay Modules
DC Output Solid State Relay Modules
Features:
jumpers.
Technical Data:
Input Data Relay Socket
Operating Voltage 4-32VDC Rated values 5A AC/ DC, 250V rms
Rated Current (mA) 4-16mA Insulation resistance 1000MΩ at 500V DC
Input Status LED/Channel Green Standard conformity EN 60947-5-1/ IEC 947-5-1
Protection Back emf diode for high frequency Ambient temperature -45 to +120˚C
(ON/OFF Switching) Termination Data
Positive/Negative Looping User Selectable using Jumpers Terminal Type Screw Terminal
Output Data Nominal Current 24A
Output Voltage 60V DC Cross-section 2.5mm²
Contact Configuration Normally Open Rated Voltage 250V
Contact Current Rating 3Amp. Rated surge Voltage 4KV
Turn On Time 2.5mSec. Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Turn Off Time 40uSec. [mm²/ mm²] AWG
Input to Output Isolation 2.5kV for 1 min. Type of Insulation material PA/ I
Solid State Relay Data Tightening torque 0.6 Nm Max.
SSR Make UL or Equivalent
General Data
Contact Type Normally Open
Input Voltage 4-32VDC
Input Current 4-16mA
PCB design UL standard ANSI IPC 2221, 2222 &
Load Current 3Amp
MIL 275B
Inbuilt Input LED indication Green LED
Output 5-100VDC Screw- Terminals UL, CSA Standard & CE standard
ON state voltage Drop ≤0.3VDC
Selection Matrix for Solid State Relay Module (Open collector output)
Channel Density 4 8 16
Protection
Contact Fuse - √ - √ - √
Fuse, LED - √ - √ - √
Normally Open Contact √ √ √ √ √ √
Wetted Contact - - - - - -
Source √ √ √ √ √ √
Configuration
Sink √ √ √ √ √ √
Current Consumption 105mA 105mA 205mA 205mA 405mA 405mA
Dimensions in mm(L X W) 74 x 90 87 x 126 134 x 90 132 x 126 269 x 90 262 x 126
UL24D04-OFI- UL24D08- UL24D08-OFI- UL24D16-SSR- UL24D16-OFI-
Part No. UL24D04-SSR-DC
SSR-DC SSR-DC SSR-DC DC SSR-DC
Ordering Code 086020100003 086020100002 086020200002 086020200004 086020300001 086020300002
Application Industry
www.ulepl.com 14
Solid State Relay Modules
AC Output Solid State Relay Modules
Features:
jumpers.
Technical Data:
Input Data Relay Socket
Operating Voltage 12-30VDC Rated values 5A AC/ DC, 250V rms
Rated Current (mA) 4mA Dielectric strength 2000V AC rms for 1 min.
Input Status LED/Channel Green Insulation resistance 1000MΩ at 500V DC
Protection Inbuild Snubber Standard conformity EN 60947-5-1/ IEC 947-5-1
Positive/Negative Looping User Selectable using Jumpers Termination Data
Output Data Terminal Type Screw Terminal
Output Voltage 24-250VAC (50Hz) Nominal Current 24A
Contact Configuration Normally Open Cross-section 2.5mm²
Contact Current Rating 3Amp. Rated Voltage 250V
PIV 800Vpk Rated surge Voltage 4KV
I 2T 340A2S for 1 min. Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Input to Output Isolation 2.5kV for 1 min. [mm²/ mm²] AWG
Solid State Relay Data Type of Insulation material PA/ I
SSR Make UL or Equivalent
Contact Type Normally Open
General Data
Input Voltage 12-30VDC
Input Current 4mA
Load Current 3Amp
Inbuilt Input LED indication Green LED
MIL 275B
Output 24-480VAC
Turn on time 20ms Approx. Screw- Terminals UL, CSA Standard & CE standard
Turn off time 25ms Approx. Mounting Din Rail Mountable
Selection Matrix for Solid State Relay Module (Open collector output)
Protection
Output Fuse - √ - √ - √
Fuse, LED - √ - √ - √
Normally Open Contact √ √ √ √ √ √
Wetted Contact - - - - - -
Source √ √ √ √ √ √
Configuration
Sink √ √ √ √ √ √
Dimensions in mm(L X W) 74 x 90 87 x 126 134 x 90 134 x 126 269 x 90 262x126
Part No. UL24D04- UL24D04-OFI- UL24D08- UL24D08-OFI-S UL24D16- UL24D16-OFI-
SSR-AC SSR-AC SSR-AC SR-AC SSR AC SSR-AC
Ordering Code 086020100001 086020100007 086020200008 086020200003 086020300005 086020300003
www.ulepl.com 15
Slim Relay Modules
Slim Relay Module, 24VDC Coil,
Single contact
Features:
jumpers.
— Compact in design. L
H
W
Technical Data:
Operating Voltage 24VDC Relay Make Relpol or Equivalent
Rated Current (mA) 7mA Contact Type 1 Change Over
Back emf Protection/Channel Free-wheeling Diode
Output Data Relay Socket
Contact Configuration SPDT, Potential Free Rated values 6A, 250V
Contact Current Rating 6 A at 250 VAC Dielectric strength ≥6kv (1.2/50us) between coil & contacts
6 A at 24 VDC Insulation resistance 1000MΩ at 500V DC
Max. switching voltage 400 VAC/250 VDC Protection Category IP20
Max. Operating Frequency 360 Cycles/hour Ambient temperature -40 to +70˚C
Max. Operating Frequency at 72000 Cycles/hour
General Data
No Load
Dielectric strength Contact 1,000V AC, 50/60Hz
Termination Data
MIL 275B
Nominal Current/Cross Section 24A/ 2.5mm²
Rated Voltage 250V
Rated surge Voltage 4KV Mounting Din Rail Mountable
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
[mm²/ mm²] AWG
Type of Insulation material PA/ I
Selection Matrix for 1 C/O Solid State Relay Digital Output Interface Module (Non-redundant)
Protection
Contact Fuse - √ - √ √ -
Fuse, LED - √ - - √ -
Pot-free Contact √ √ - - - √
Wetted Contact - - - √ √ -
Normally Open Contact √ - - - √
Configuration Source √ √ √ √ √ √
Sink - - - - - -
Dimensions in mm(L X W) 67 X 126 105 x 126 132 x 126 217 x 126 252 x 126 260 x 126
ULSLM08-OFI- UL24D16DOSLM- UL32DO-C- UL24D32DO-
Part No. ULSLM08-C ULSLM16-NO
NO-V1 1NOW-P TB-SLM C-D37-SRC
Ordering Code 086010100047 086010100018 086010200021 085030300088 085030400006 085030400001
www.ulepl.com 16
Modular Wiring Solutions
Digital Input Field Interface Modules for
24VDC Field Interrogation
Features:
— Provides ease trouble-shooting &
maintenance.
Technical Data:
Field Input Data System Side Termination
Input Signal Voltage 24VDC Terminal Type D-Sub Connector
Configuration Single Ended/ 2-wire (user to specify) Contact Material Copper Alloy
Protection Short Circuit Operating Current 5A per contact
Input Status LED/Channel Green LED if applicable Contact Resistance ≤10mΩ
Fuse Fail LED/Channel Red LED Insulation Resistance ≥5000MΩ
Termination Screw Terminals Maximum Voltage 1000 Vrms
System Output Data Relay Data
Output Signal Voltage 24VDC Relay Make Omron, G2RL Series or Equivalent
Signal Mode Non-Redundant or Redundant Contact Type 1 Change Over
(user to specify)
Approvals
Configuration Low going/High going (User to specify)
Termination 25/37 Pin D-Sub Connector
Field Side Termination Relay Socket

Terminal Type Screw Terminal Rated values 5A AC/ DC, 250V rms
Nominal Current /Sq.mm 24A/ 2.5mm² Dielectric strength 2000V AC rms for 1 min.
Rated Voltage 250V Insulation resistance 1000MΩ at 500V DC
Rated surge Voltage 4KV Ambient temperature -45 to +120˚C
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
[mm²/ mm²] AWG General Data
Insulation material PA/I Ambient temperature 0°C to +60°C
Tightening torque 0.6 Nm Max. Relative humidity Max. 90% (Non-condensing)
PCB design UL standard ANSI IPC 2221,2222 &
Auxiliary Power Supply MIL 275B
Field Power Supply 24VDC Screw- Terminals UL, CSA Standard & CE standard
System Power supply 24VDC Mounting Din Rail Mountable
Selection Matrix for 24VDC, Digital Input Field Interface Module (Non-redundant)
Fuse, 100mA √ √ - √ √
Protection
Fuse, LED √ √ - √ √
Relay - - √ √ -
Isolation
Opto-Isolation - - - - -
High going √ √ √ √ √
Configuration
Low going - - - - -
Current Consumption 210mA 10mA 410mA 410mA 320mA
Dimensions in mm(L X W) 107X126 141X126 232X90 253X126 262.5x126
Part No. UL08DIFI-D15-VF-CMPT UL16DIFI-D25-VF-CMPT UL24D16DI-C-D25-RDG UL16DIFI-C-D25-V1-XOR UL32DIFI-D37-VF-CMP
Ordering Code 085010100006 085010200007 210316110009800 085010200022 085010300001
Selection Matrix For 24VDC, Digital Input Field Interface Module (Redundant)
Fuse, 100mA √ √ √ - √
Protection - √
Fuse, LED - √ √
Relay - - - √ -
Isolation - -
Opto-Isolation - - -
High going √ - √ √ √
Configuration
Low going - √ - - -
Current Consumption - 5mA 15mA 410mA 180mA
Dimensions in mm(L X W) 110X126 172X126 170X126 269X90 312x126
Part No. UL08DIF-RED-D15 UL16DIFI-RED-D25-VF-CMPT-SK UL16DIFI-RED-D25-VF-CMPT UL24D16DI-RED-2C-D25 UL32DIFI-RED-D37-VF-CMPT
Ordering Code 085010100012 085020200031 085020200005 085020200018 085020300001
Note: In Digital Input Field Interface module wide range of permutations & combinations are available.
•Digital Input Field Interface Module with Single ended field wiring configuration are available on request.
•DI FIM with active isolation (Relay/Opto-Isolation) are available with fuse & fuse blown LED Indication in field input of each channel
www.ulepl.com 17
Digital Input Field Termination Assembly
with 24VDC Field Interrogation for
differential type DI module
Features:
maintenance.
Technical Data:
Input Signal Voltage 24VDC Terminal Type D-Sub Connector
Configuration Single Ended/ 2 Wire (user to specify) Contact Material Copper Alloy
Protection Short Circuit Operating Current 5A per contact
Input Status LED/Channel Green LED if applicable Contact Resistance ≤10mΩ

Output Signal Voltage 24VDC Relay Make Omron, G2RL Series or Equivalent
Signal Mode Non-Redundant or Redundant Contact Type 1 Change Over
(user to specify)
Approvals
Configuration Differential
Relay Socket
Field Side Termination
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Field Power Supply MIL 275B
Aux Voltage 24VDC Screw- Terminals UL, CSA Standard & CE standard
Power ON Status Green LED Mounting Din Rail Mountable
Selection Matrix for Digital Input Field Termination Assembly, 24VDC field interrogation (Non-redundant)
Channel Density 16
Fuse, 100mA √ √ √
Protection
Fuse, LED √ - √
Relay - √ √
Isolation
Opto-Isolation - - -
Current Consumption 20mA 410mA 410mA
Dimensions in mm (L X W) 141X126 242X126 264X126
Part No. UL16DIFI-FTA-D37-VF-CMPT-V2 UL16DIF-FTA-C-D37-XOR UL24D16DIFI-FTA-C-D37
Ordering Code 085010200108 085010200047 085010200045
Selection Matrix for Digital Input Field Termination Assembly, 24VDC field interrogation (Redundant)
Channel Density 16
Fuse, 100mA √ -
Protection
Fuse, LED √ -
Relay - √
Isolation
Opto-Isolation - -
Current Consumption - 26mA
Dimensions in mm(L X W) 182 X126 257 X126
Part No. UL16DIFI-RED-FTA-D37 UL16DIFTA2CO-2D37
Ordering Code 085020200016 085010200157
Note: In Digital Input Field Termination Assembly wide range of permutations & combinations are available.
• Digital Input Field Termination Assembly with Single ended field wiring configuration are available on request.
• DI FTA with active isolation (Relay/Opto-Isolation) are available with fuse & fuse blown LED Indication in field input of each channel
www.ulepl.com 18
110VAC Field Interrogation
Features:
maintenance.
Technical Data:
Input Signal Voltage 110VAC Terminal Type D-Sub Connector
Protection Short Circuit/RC Operating Current 5 A per contact
Input Status LED/Channel Green LED Contact Resistance ≤10mΩ
Output Signal Voltage 24VDC Relay Make Omron, G2R Series or Equivalent
Signal Mode Non-Redundant or Redundant
Contact Type 1 Change Over
(user to specify)
Approvals
Configuration Low Going/High Going (User to specify)

Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Field Power Supply 110VAC Screw- Terminals UL, CSA Standard & CE standard
System Power Supply 24VDC Mounting Din Rail Mountable
Selection Matrix For 110VAC, Digital Input Field Interface Module (Non-redundant)
Channel Density 16
Fuse, 100mA - √ √ √ √
Protection
Fuse, LED - √ √ - √
Relay √ √ √ - √
Isolation
Opto-Isolation - - - √ -
High going √ √ √ √ √
Configuration
Low going - - - - -
Current Consumption 160mA 400mA 200mA 160mA
Dimensions in mm (L X W) 277X90 274X126 330X126 232 X126 347X126
Part no. UL110A16DIFI-INT- UL110A16DI-ISO- UL110A16DI-AT-
UL110A16-DI-CD25 UL110A16-DIFI-CD25 CON-D25 RED-D25-2C
RDG-C-D25-SNB
Ordering Code 085010200158 085010200159 085010200160 091020100048 085020200032
•Digital Input Field Interface Module with Single ended field wiring configuration are available on request.
•DI FIM with active isolation (Relay/Opto-Isolation) are available with fuse & fuse blown LED Indication in field input of each channel
www.ulepl.com 19
230VAC Field Interrogation
Features:
maintenance.
Technical Data:
Protection Short Circuit/RC Operating Current 5 A per contact
(user to specify)
Approvals
Configuration Low going/High going (User to specify)

Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Field Power supply 230VAC Screw- Terminals UL, CSA Standard & CE standard
System Power supply 24VDC Mounting Din Rail Mountable
Selection Matrix for 230VAC, Digital Input Field Interface Module (Non-redundant)
Channel Density 16
Fuse, 100mA - - √ √ √ √
Protection
Fuse, LED - - √ √ - √
Relay √ √ √ √ - √
Isolation
Opto-Isolation - - - - √ -
High going √ √ - - √ √
Configuration
Low going - - √ √ - -
Dimensions in mm(L X W) 277X90 242X126 330X126 330X126 232 X126 347X126
Part No. UL230A16DI- UL230A16DIFI- UL230A16DIFI-INT- UL230A16DIFI-INT- UL230A16DI-ISO- UL230A16DI-AT-RED-
CD25 CD25 RDG-C-D25-SNB RDG-SSR-D25-SNB CON-D25 D25-2C
Ordering Code 085010200091 085010200148 085010200072 085010200166 091020100016 085020200033
Note: In Digital Input Field Interface module wide range of permutations & combinations are available
• Digital Input Field Interface Module with Single ended field wiring configuration are available on request.
•DI FIM with active isolation (Relay/Opto-Isolation) are available with fuse & fuse blown LED Indication in
each field input channel available on request.
www.ulepl.com 20
Digital Input Field Termination Assembly
with 110VAC /230VAC Field Interrogation
for differential type DI module
Features:
maintenance.
Technical Data:
Protection Short Circuit /RC Operating Current 5 A per contact
(user to specify)
Approvals
Configuration Differential

Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Field Power Supply MIL 275B
Aux Voltage 110VAC/230VAC Screw- Terminals UL, CSA Standard & CE standard
Selection Matrix for 16 Channel 110VAC, 230VAC Digital Input Field Termination Assembly (Non-redundant)
Operating Voltage Rating 110VAC 230VAC
Fuse, 100mA √ - √ -
Protection
Fuse, LED √ - √ -
Relay √ √ √ √
Isolation
Opto-Isolation - - - -
Dimensions in mm (L X W) 237X126MM 232x126 237X126MM 232x126
Part No. UL110A16DIFIFTA1CO-D37 UL110A16DIFTA1CO-D37SNB UL230A16DIFIFTA1CO-D37 UL230A16DIFTA 1CO-D37SNB
Ordering Code 085010200049 085010200163 085010200165 085010200164
Note: In Digital Input Field Termination Assembly wide range of permutations & combinations are available.
•Digital Input Field Termination Assembly with Single ended field wiring configuration are available on request.
•Digital Input Field Termination Assembly for 110VAC/230VAC field interrogation with redundancy available on request.
•DI 110VAC/230VAC FTA with active isolation (Relay/Opto-Isolation) & Snubber protection with fuse & fuse blown LED Indication in
each field Input channel is available on request
www.ulepl.com 21
Digital Output Relay Interface Modules,
1 C/O Contact
Features:
maintenance.
Technical Data:
System Input Data System Side Power Supply
Input Signal Voltage 24VDC Aux Voltage 24VDC
Signal Mode Non-Redundant or Redundant Power ON Status Green LED
(user to specify) System Side Termination
Input Status LED/Channel Green LED Terminal Type D-Sub Connector
Protection Back emf Contact Material Copper Alloy
Signal Configuration Sink/Source (User to specify) Operating Current 5 A per contact
Termination 15/25 Pin D-Sub Connector Contact Resistance ≤10m Ω
Field Output Data Insulation Resistance ≥5000MΩ
Output Signal Voltage 24VDC/110VAC/230VAC Maximum Voltage 1000 Vrms
Signal Configuration Pot-free/Wetted (user to specify) Relay Data
Contact Configuration SPDT, 1 Changeover
Relay Make Omron, G2RL Series or Equivalent
Contact Current Rating 12 Amp.@ 250VAC/24VDC
Contact Type SPDT, 1 Changeover
Protection Short Circuit
Fuse Type Glass Fuse Approvals
Fuse Fail LED/Channel Red LED
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12 General Data
[mm²/ mm²] AWG Ambient temperature 0°C to +60°C
Insulation material PA/I Relative humidity Max. 90% (Non-condensing)
Tightening torque 0.6 Nm Max. PCB design UL standard ANSI IPC 2221,2222 &
Field Side Power Supply MIL 275B
Aux Voltage 24VDC/110VAC/230VAC Screw- Terminals UL, CSA Standard & CE standard
Selection Matrix for 1 C/O Digital Output Relay Interface Module (Non-redundant)
Channel Density 8 16
Contact Fuse - - √ √ √
Protection
Fuse, LED - - √ √ √
Pot-free Contact √ √ √ - √
Wetted Contact - - - √ √
Source √ √ √ √ √
Configuration
Sink - - - - -
Current Consumption 210mA 410mA 410mA 410mA 410mA
Dimensions in mm (L X W) 147 X 90 272 X 90 269 X 126 280x126 298 X 126
Part No. UL24D08DO-C-D15-R1 UL24D16DO-C-D25-CMPT UL16DOFI-CD25-VF-CMPT-XOR UL24D16DOWFI-COB UL24D16DOFI-PF-WT-C-D25
Ordering Code 085030100016 085030300054 085030300133 085030300134 085030300135
Selection Matrix for 1 C/O Digital Output Relay Interface Module (Redundant)
Channel Density 16
Protection Contact Fuse - - -
Fuse, LED - - -
Pot-free Contact √ √ √
Wetted Contact - - -
Configuration Source √ √ -
Sink - - √
Dimensions in mm (L X W) 277X126 252X126 252X126
Part No. UL16DORED-CD25-OB UL16DOPS-RED-C-D25 UL16DORED-CD25-OB-SK
Ordering Code 085040300003 085040300031 085040300035
Note: Digital Output Relay Interface modules are available in wide permutations & combinations.
• Other combination if any can be available on request.
•Pot free Relay Contact Fuse Rating will be 5A & Wet Contact fuse rating will be 2A or please specify. www.ulepl.com 22
Digital Output Relay Interface Modules,
2 C/O Contact
Features:
maintenance.
Technical Data:
Input Signal Voltage 24VDC Aux Voltage 24VDC
Signal Mode Non-Redundant or Redundant Power ON Status Green LED
Signal Configuration Sink/Source (User to specify) Operating Current 5 A per contact
Termination 25 Pin D-Sub Connector Contact Resistance ≤10mΩ
Contact Configuration DPDT, 2 Changeover Relay Make Omron, G2RL Series or Equivalent
Contact Current Rating 8 Amp.@ 250VAC/24VDC
Contact Type DPDT, 2 Changeover
Approvals
Fuse Type Glass Fuse
Selection Matrix for 2C/O Digital Output Relay Interface Module (Non-redundant)
Channel Density 16
Contact Fuse - - - √ √ √
Protection
Fuse, LED - - - √ √ -
st
1 C/O √ - √ √ - √
Pot-free Contacts
2nd C/O √ - - √ - -
1st C/O - √ - - √ -
Wetted Contacts nd
2 C/O - √ √ - √ √
Dimensions in mm (L X W) 257 X 126 267 X 126 268 X126 372 X 126 442 X 126 396 X 126
Part No. UL24D16DO25M-2C-OB UL24D16DO-WT-2C-D25 UL24D16DOPSRED-1W1CO-2C-D25 UL24D16DO-OFI-2C-D25 UL24D16DO2WFI-2C-D25-24VDC UL24D16DO1WF1COF-D25
Ordering Code 085030300031 085030300021 085040300008 085030300032 085030300099 085030300063
Selection Matrix For 2C/O Digital Output Relay Interface Module (Redundant)
Channel Density 16
Contact Fuse - - - √ √ √
Protection
Fuse, LED - - - - √ √
1st C/O √ - √ - √ √
Pot-free Contacts
2nd C/O √ - - - √ -
1st C/O - √ √ √ - √
Wetted Contacts
2nd C/O √ - √ - -
Dimensions in mm (L X W) 267 X 126 302 X 126 265 X 126 408 X 126 454 X 126 302X126
Part No. UL16REDDO-2C-D25-PSRED UL24D16DORED-WT-2C-D25 UL24D16DORED-1W1CO-2CD25 UL24D16DO-RED-2WF-2C-D25 UL24D16DO-RED-2PFI-2C-D25 UL24D16DO-RED-1WFI1CO-D25-2C-SK-SC
Ordering Code 085040300028 085040300025 085040300017 085040300026 085040300004 085030300075
Note: Digital Output Relay Interface modules are available in wide permutations & combinations.
Digital Output Relay Field Termination
Assembly using 1 C/O Relays for
Differential type Digital Output module
Features:
maintenance.
Technical Data:
Input Signal Voltage 24VDC Aux Voltage -
Signal Mode Non-Redundant or Redundant Power ON Status -
Signal Configuration Differential Operating Current 5 A per contact
Output Signal Voltage 24VDC/110VAC/230VAC Maximum Voltage 1000 V rms
Signal Configuration Pot-free/Wetted(user to specify)
Relay Data
Contact Configuration SPDT, 1 Change over
Contact current rating 12 Amp. @ 250VAC/24VDC
Contact Type SPDT, 1 Changeover
Approvals
Selection Matrix for Digital Output Relay Field Termination Assembly with 1 C/O contact for differential type digital output module (Non-redundant)
Channel Density 16
Contact Fuse - √ √ -
Protection
Fuse, LED - √ √ -
Pot-free Contact √ √ - -
Wetted Contact - - √ √
Dimensions in mm (L X W) 254 X 126 269 X 126 282 X 126 277 X 126
UL24D16DOFTA-CD37 UL16DOFTA-CFI-C-D37- UL16DOFTAWFI- UL24D16DO-WT-FTA-
Part No.
VF-CMPT-XOR C-D37-VF-CMPT-XOR CD37 SNB
Ordering Code 085030300073 085030300126 085030300128 085030300089
Note: Digital Output Relay Field Termination Assembly are available in wide permutations & combinations.
•Pot free Relay Contact Fuse Rating will be 5A & Wet Contact fuse rating will be 2A or please specify.
www.ulepl.com 24
Digital Output Relay Field Termination
Assembly using 2 C/O Relays for
Differential type Digital Output module
Features:
maintenance.
Technical Data:
Input Signal Voltage 24VDC Aux Voltage -
Signal Mode Non-Redundant or Redundant Power ON Status -
Signal Configuration Differential Operating Current 5 A per contact
Contact Configuration DPDT, 2 Changeover
Relay Make Omron, G2R L Series or Equivalent
Contact Current rating 8 Amp.@ 250VAC/24VDC
Contact Type DPDT, 2 Change over
Approvals
Selection Matrix for Digital Output Relay Interface Module with 2 C/O contact for differential type digital output module (Non-redundant)
Channel Density 16
Contact Fuse - - √ √ √ √
Protection
Fuse, LED - - √ - √ √
1st C/O √ - √ - - -
Pot-free Contacts
2nd C/O √ - √ √ √ √
1st C/O - √ - √ √ √
Wetted Contacts
2nd C/O - √ - - - -
Dimensions in mm(L X W) 258 X 126MM 276 X 126MM 357 X 126MM 357 X 126MM 272X126MM 352 X 126MM
Part No. UL16DOFTA2CO-D37 UL16DOFTA2WT-D37 UL16DOFTA-OFI-2C-D37 UL16DOFTA1WF1CO-D37 UL24D16DO-FTA-1WFI1CO-D37 VF CMPT UL16DOFTA1WFI1CFI-D37
Ordering Code 085030300017 085030300111 085030300015 085030300011 085030300030 085030300020
Selection Matrix for Digital Output Relay Interface Module with 2 C/O contact for differential type digital output module (Redundant)
Channel Density 16
Contact Fuse - √
Protection
Fuse, LED - √
1st C/O √ -
Pot-free Contacts
2nd C/O √ √
1st C/O - √
Wetted Contacts
2nd C/O - -
Current Consumption 410mA 410mA
Dimensions in mm(L X W) 262 X 126 352 X 126
Part No. UL16DOREDFTA2CO-D37 UL16DOREDFTA1WFI1CFI-D37
FIM Ordering Code 085040300013 085040300019
Note: Digital Output Relay Field Termination Assembly are available in wide permutations & combinations.
•Other combination if any can be available on request.
Analog Input Field Interface Modules with
2-Wire & 4-wire Configuration
Features:
— 2Wire /4 Wire user selectable
maintenance.
Technical Data:
Field Input Data Field Side Termination
Input Signal Level 4-20mA Terminal Type Screw Terminal
Field Wiring 2-Wire /4-Wire (user selectable) Nominal Current /Sq.mm 24A
Protection Short Circuit Wire Cross section 2.5mm²
Fuse Rating/Channel 100mA Rated Voltage 250V
Fuse Fail LED/Channel Red LED in 2-Wire Configuration Rated surge Voltage 4KV
Isolation 3 way Isolation (Optical) Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
(Refer selection matrix) Channel to Channel, Input to Output [mm²/ mm²] AWG
Power Supply to Field Channel Insulation material PA/I
Termination Screw Terminals Tightening torque 0.6 Nm Max.
System Output Data General Data

Output Signal Level 4-20mA/1-5V (user to specify) Ambient temperature 0°C to +60°C
Signal Configuration Single Ended/Differential Type PCB design UL standard ANSI IPC 2221,2222 &
(user to specify) MIL 275B
Signal Mode Non-Redundant/ Redundant Screw- Terminals UL, CSA Standard & CE standard
Termination 25 Pin D-Sub Connector Mounting Din Rail Mountable
System Side Termination Auxiliary Power Supply

Terminal Type D-Sub Connector Aux Voltage 24VDC
Contact Material Copper Alloy Power ON Status Green LED
Operating Current 5 A per contact
Contact Resistance ≤10mΩ
Insulation Resistance ≥5000MΩ
Maximum Voltage 1000 Vrms
Selection Matrix for Analog Input Field Interface Module (Non-Redundant)
Fuse, 100mA √ √ √ √
Protection Fuse, LED √ √ - √
Fuse in 4-Wire - √ - √
Signal Output (1-5V) - - - -
Galvanic Isolation - - √ -
Dimensions in mm (L X W) 82X126MM 96X126MM 182x126MM 165X126MM
Part No. UL04AI-2WFI-4WF-D15-V-SPD UL08AI-2WFI-4WF-D25-VF-CMPT UL08AI-2W4W-ISO-D25-4W. UL16AI-2WFI-4WF-D37-VF-CMPT
Ordering Code 085050100001 085050200001 091020100022 085050400001
Selection Matrix For Analog Input Field Interface Module (Redundant)

Channel Density 8 16
Fuse, 100mA √ √ √ √
Protection Fuse, LED √ - - √
Fuse in 4-Wire √ - - √
Signal Output (1-5V) - - - -
Galvanic Isolation - √ √ -
Dimensions in mm (L X W) 152X90MM 110x126 332X126 282X126MM
Part No. UL08AI-RED-D25-SPD-I-I-72-VF UL08AI-RED-2W4W-ISO-D25 UL16AI-4W-ISO-RED-D37-4W UL16AI-RED-D37-SPD-I-I-VF-6.8V
Ordering Code 085060100002 091020100034 091020100011 085060200001
Note: Analog Input field interface module with Isolation is having inbuilt resettable fuse protection and current limiting.
www.ulepl.com 26
Analog Output Field Interface Modules
with fuse protection
Features:
— Available Sink and Source type
maintenance.
Technical Data:
System Input Data Field Side Termination
Input Signal Level 4-20mA Terminal Type Screw Terminal
Signal Configuration Sink or Source Current Output Nominal Current /Sq.mm 24A
(user to specify) Wire Cross section 2.5mm²
Signal Mode Non-Redundant/Redundant Rated Voltage 250V
Termination 15/25 Pin D-Sub Connector Rated surge Voltage 4KV
Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Field Output Data [mm²/ mm²] AWG
Output Signal Level 4-20mA Insulation material PA/I
Protection Short Circuit Tightening torque 0.6 Nm Max.
Fuse Rating/Channel 100mA
Fuse Fail LED/Channel Red LED General Data
Isolation 3 way Isolation (Optical) Ambient temperature 0°C to +60°C
(Refer selection matrix) Channel to Channel, Input to Output Relative humidity Max. 90% (Non-condensing)
Power Supply to field Channel PCB design UL standard ANSI IPC 2221,2222 &
Termination Screw Terminals MIL 275B
System Side Termination Mounting Din Rail Mountable
Terminal Type D-Sub Connector
Contact Material Copper Alloy Auxiliary Power Supply
Operating Current 5 A per contact Aux Voltage 24VDC
Contact Resistance ≤10mΩ Power ON Status Green LED
Insulation Resistance ≥5000MΩ
Selection Matrix For Analog Output Field Interface Module (Non-Redundant)

Channel Density 4 8
Fuse, 100mA √ √ √ √
Protection
Fuse, LED - √ √ -
Galvanic Isolation - - - √
Current Consumption - - 960mA
Dimensions in mm (L X W) 77 X 90MM 82 X126MM 92 X 126M 182 X 126MM
Part No. UL04AO-D15S7 UL04AOFI-D15S7-SPD UL08AOFI-D25-VF-CMPT UL08AO-ISO-D25-SRC.
FIM Ordering Code 085070100004 085070100003 085070200002 091020100025
Selection Matrix For Analog Output Field Interface Module (Redundant)

Fuse, 100mA √ √ √
Protection
Fuse, LED √ - -
Galvanic Isolation √ - -
Dimensions in mm (L X W) 45X126MM 125X126MM 182X126MM
Part No. UL01AO-ISO-RED-TB-SRC UL04AO-RED-D15-SRC UL08AO-RED-D25-SRC
FIM Ordering Code 091020100020 091020100013 091020100018
Note: Analog output Redundant field interface modules with Isolation has in-built resettable fuse & current limiting
www.ulepl.com 27
Special DI LFD Module
Digital Input Field Interface Modules with
Line Fault detection (LFD) and Alarm Contact
Features:
— Fast traceability of fault /healthy status through
— LED Indication for Wire break, Short Circuit, Signal healthy.
— Fault Alarm contact for each channel/ group of eight.
— Fault detection is done using external EOL Resistance
Network.
— Fault status & signal status on Modbus (refer selection
matrix).
— Provides ease trouble-shooting & maintenance.
Technical Data:
Field Interrogation Voltage 24VDC Terminal Type D-Sub Connector/ Screw terminal
Field Wiring Configuration Two wire interrogation MSTB Plug-in type
Protection Current limiting Contact Material Copper Alloy
Status Indication Green LED for Input Status Operating Current 5 A per contact
Red LED for Wire Break Contact Resistance ≤10mΩ
Orange LED for Wire Open Insulation Resistance ≥5000 MΩ
External EOL Resistor Series & Parallel Resistor network
termination on field across field pot free contact
Field Side Termination
(Refer selection matrix)
Termination Screw Terminals
Nominal Current /Sq.mm 24A/ 2.5mm²
System Output Data
Rated Voltage 250V
Output Signal Voltage 24VDC
Signal Mode Redundant /Non. Redundant
Configuration High going Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
Alarm contact Alarm contacts [mm²/ mm²] AWG
Termination 25 Pin D-Sub Connector or MSTB Insulation material PA/I
Screw type Plug in connector Stripping Length 8mm
Auxiliary Power Supply Tightening torque 0.6 Nm Max.
Field Power Supply 24VDC General Data
System Power supply 24VDC Ambient temperature 0°C to +60°C
PCB design UL,ANSI IPC 2221,2222 &
MIL 275B
Selection Matrix for 24VDC, Digital Input Line Fault Detection Interface Module
Protection Current Limiting √ √ √
Healthy Signal √ √ -
Redundancy
Fault Signal √(group of 8) √(Per channel) -
D sub connector - - √
Alarm Contact
On Screw Terminal √(group of 8) √(Per channel) -
(fault status)
On Modbus Port - - √(modbus)
Suitable EOL Resistor network 1K Series, 10K Parallel 1K Series, 10K Parallel Series 3.3K, Parallel 6.8K
Dimensions in mm(L X W) 312 x 126 202X126 130 x 126
Part No. UL16DI-RED-WFD-D25 UL24D08DIWFD-2C20 UL08DIF-D25-LFD-MOD
Ordering Code 085010200142 085010100001 091020100015
•DI LFD Module with only LED Indication for short circuit & open circuit available on require.
•DI LFD Module with 2 alarm contact for group of 8 channel can be assigned to 2 DI channel of PLC for reedback.
•DI LFD Module with alarm contact for each channel require additional DI channels for fault reedback on controller.
•DI LFD Module with fault status read on modbus if used than additional DI channel for fault reedback is not required.
•EOL Resistors network is in customer scope OR EOL resistor board available on request.
www.ulepl.com 28
Signal Isolators and Multipliers
Current Signal Isolator
Technical Specification:
Type Analog signal Isolator.

Optical Isolation and Signal Conditioning and
Principle
Amplification
Input Signals 4 to 20 mA DC
Output Signal 4 to 20 mA DC
Load Driving Capacity 600 Ohms.
Features: Isolation type Optical and Galvanic.
Isolation level 1.5 kV
l Optical & Galvanic Isolation between Input, Indication Red LED for Power On.
Output & Power Supply Output protection Short / Open Circuit protection.
l High accuracy and linearity to input signal Calibration facility Zero and Span settings [external].
l Very low power consumption and heat Power Supply 24VDC [Optionally 20 to 70 V DC].
dissipation Power Consumption 1 Watt
l Digital Indication option with/without Dimensions [Hx W x D]. 75 x 22.6 x 170 mm.
control relay outputs Execution DIN-Rail mounting.
l Rugged, industrial grade ABS enclosure Operating Temperature 0 to + 55°C.
Part no. UL-TX330-I-D-N
Ordering Code 091010100047
Voltage Signal Isolator Technical Specification:

Type DC Voltage Signal Isolator
Principle Optical Isolation and Signal Conditioning.
Input Signals 0 to 10 Volts DC [or as required].
Output Signal 0 to 10 Volts DC [or as required].
Isolation type Optical and Galvanic.
Isolation level 1.5 kV rms for one minute.
Output protection Short / Open Circuit protection.
Features: Calibration facility Zero and Span settings [external].
l Optical & Galvanic Isolation between Input, Indication Red LED for Power On.
Output & Power Supply Power Supply 85 to 270 V AC, 50 Hz [Optionally 20 to 70 V
DC].
l High accuracy and linearity to input signal
l Very low power consumption and heat Power Consumption 3 Watt
dissipation Dimensions [H x W x D]. 100 x 22 x 110 mm.
l Digital Indication option with/without Execution DIN-Rail mounting.
control relay outputs Operating Temperature 0 to + 50°C.
l Rugged, industrial grade ABS enclosure Part no. UL-TX235-I-S-N
Signal Isolating Repeater Technical Specification:

Type Analog Signal Isolating Multiplier (Repeater
/Splitter).
Principle Optical Isolation and Signal Conditioning and
Amplification
Input Signals 4 to 20 mA DC [or as required].
Output Signal Two isolated and buffered outputs of 4 to 20 mA DC
Load Driving Capacity 600 Ohms.
Isolation type Optical and Galvanic.
Features: Isolation level 1.5 kV rms for one minute.
Output protection Short / Open Circuit protection.
l Optical & Galvanic Isolation between Input, Calibration facility Zero and Span settings [external].
Output & Power Supply Indication Red LED for Power On.
l High accuracy and linearity to input signal Power Supply 90 to 270 VAC 50/60 Hz [Optionally 20 to 70 V DC].
l Very low power consumption and heat Power Consumption 1.8 Watt
dissipation Dimensions [H x W x D]. 100 x 22 x 110 mm.
l Options of multiple [upto four] isolated Execution DIN-Rail mounting.
outputs Operating Temperature 0 to + 50°C.
l Rugged, industrial grade ABS enclosure Part no. UL-TX232-LLHN
www.ulepl.com 29
Passive Interface Modules

(D sub to Screw Terminals)
Features:
— Elimination of single core wiring, connection
through Prefab plug-in Cable.
— Reduce Installation & assembly time.
— Available with D sub male/ female to terminals.
— Connection one to one.
Technical Data:
General Data System Side Termination
Number of Positions 15, 25, 37, 50 Plug-in Connector type D-Sub Connector
Operating Voltage Max. 60V AC/DC Contact Material Copper Alloy
Current Rating / Channel 2 Amp. Operating Current 5 A per contact
Test Voltage 500V, 1min Contact Resistance ≤10mΩ
Terminations Control Side D Sub Male/ Female Connector. Insulation Resistance ≥5000MΩ
Field Side Screw Type Terminals Maximum Voltage 1000 Vrms
Connection Control Side Multicore Shielded/Non-Shielded Cable Field Side Termination
Type 15 to 50 Core Terminal Type Screw Terminal
Field Side Wire Size 0.2mm² - 2.5mm² Nominal Current /Sq.mm 24A/ 2.5mm²
Environment/ Compliance Data Rated Voltage 250V
Ambient temperature 0°C to +60°C Rated surge Voltage 4KV
Relative humidity Max. 90% (Non-condensing) Solid/ Stranded 0.2-4/ 0.2-2.5/ 24-12
PCB design UL standard ANSI IPC 2221, 2222 [mm²/ mm²] AWG
& MIL 275B Insulation material PA/I
Screw- Terminals UL, CSA Standard & CE standard Tightening torque 0.6 Nm Max.
Ordering Details Ordering Details

D-Sub Female 15 25 37 50 D-Sub Female 15 25 37 50
Connector Connector
Positions. Positions.
Dimensions in 54 x 90 84 x 90 107 x 90 152x 90 Dimensions in 52 x 90 73 x 90 107 x 90 152x 90
mm(L X W) mm(L X W)
Part no. ULFIMD15F ULFIMD25F-R ULFIMD37F ULFIMD50F FIM Ordering ULFIMD15M ULFIMD25M ULFIMD37M ULFIMD50M
Code
Ordering Code 087010100031 087010100041 087010100011 087010100024 Ordering Code 087010100050 087010100036 087010100012 087010100013
Note: Passive Module with D sub connector to terminals with LED Indication is available on request.
Specify Prefab cable length while ordering.
www.ulepl.com 30
Passive Interface Module
(IDC/FRC to Screw terminals)
Features:
— Available with all standard IDC/ FRC Pins to
terminals.
Technical Data:
Number of Positions 10, 16, 20, 34, 40, 50, 64 Plug-in Connector type IDC/FRC
Current Rating / Channel 1.5 Amp. Operating Current 5 A per contact
Terminations Control Side IDC/FRC Male Connector Insulation Resistance ≥5000MΩ
Connection Control Side Multicore Non-Shielded Cable Field Side Termination
Type 20-64 Core, 0.14 mm² Terminal Type Screw Terminal
Field Side Wire Size 0.14 mm² Nominal Current /Sq.mm 24A/ 2.5mm²
PCB design UL standard ANSI IPC 2221, 2222 & [mm²/ mm²] AWG
MIL 275B Insulation material PA/I
Ordering Details
IDC/FRC Male 10 16 20 34 40 50
Connector
Positions.
Dimensions in 52 x 90 70 x 90 70 X 90 114 x 90 114 x 90 137 X 90
mm(L X W)
Part no. ULFLKM10 ULFLKM16 ULFLKM20 ULFLKM34 ULFLKM40 ULFLKM50
Ordering Code 087010100091 087010100005 087010100006 087010100074 087010100003 087010100002
Ordering Details
IDC/FRC Male 50
Connector
Positions.
Dimensions in 146X45
mm(L X W)
Part no. ULFLKM50M-42
Note: Passive Module with IDC/FRC to terminals with LED Indication is available on request.
www.ulepl.com 31
Passive Interface Module
(EDAC/ELCO to Screw terminals)
Features:
— Available with all standard EDAC/ELCO Pins to
terminals.
Technical Data:
Number of Positions 20, 38, 56, 90 Plug-in Connector type EDAC/ELCO
Current Rating / Channel 2 Amp. Operating Current 8.5 A per contact
Terminations Control Side EDAC/Elco Male Connector Insulation Resistance ≥5000MΩ
Connection Control Side Multicore Sh./Non-Shielded Field Side Termination
Type Cable 20-56 Core, 0.34 mm² Terminal Type Screw Terminal
Field Side Wire Size 2.5 mm² Nominal Current /Sq.mm 24A/ 2.5mm²
PCB design UL standard ANSI IPC 2221, 2222 & [mm²/ mm²] AWG
MIL 275B Insulation material PA/I
Ordering Details
EDAC/ ELCO ELCO38/38 ELCO38/38 ELCO56/56 ELCO56/56 ELCO90/38
Connector
Dimensions in 107 X 90 107 X 90 152 X 90 152 X 90 109 X 90
mm(L X W)
Part no. ULELCO38-38-XOR ULELCO38-38-XOL ULELCO56-56M-XOR-R1 ULELCO56-56M-XOL-R1 ULELCO90-38-XOL-R1
Ordering Code 087010100032 087010100033 087010100093 087010100092 087010100094
Note: EDAC/ELCO Module with respective EDAC/ELCO Prefab Cable are also available.
www.ulepl.com 32
CNC Interface Modules
CNC Specific I/O Interface Module
Features:
— Plug-in Relays.
— Provides ease trouble-shooting & maintenance.
Technical Data:
System Input Data System Side Termination
Number of Inputs & Outputs 24 Digital Inputs & 16 Digital Outputs Terminal Type 50 Pin FRC Connector
Input Signal Voltage 24VDC Contact Material Copper Alloy
Signal Mode Non-Redundant Operating Current
0
1.5A per contact @ 20C
Protection Back emf Insulation Resistance ≥5000MΩ @ 100V
Signal Configuration Source @ 500Vdc
Termination 50 Pin FRC Connector
Dielectric Withstanding 1000 Vrms
Field Output Data
Voltage
Output Signal Voltage 24VDC
Relay Data
Signal Configuration Pot-free
Contact Configuration DPDT, 2 Change Over
Contact Type DPDT, 2 Change Over
Contact current rating 5Am @ 230VAC / 24VDC
Protection Short Circuit (refer selection matrix) Approvals
Power ON Status Green LED Mounting Universal Rail Mounting
Selection Matrix CNC Interface Relay Module 24Input & 16 Output (Non-redundant)
Channel Density 16
Protection Contact Fuse - √
Fuse Fail LED - -
Pot-free Contact √ √
Wetted Contact - -
Configuration Source √ √
Sink - -
Current Consumption 410mA 410mA
Dimensions in mm(L X W) 312 X 90 312 X 126
Part No. UL24I16O-PWRMT-OB UL24I16O-OF-C-PWRMT-OB
Ordering Code 089010100002 089010100001
Note: Specify Prefab cable length while ordering.

www.ulepl.com 33
Prefabricated Cables
Prefabricated Cables for DI, DO, AI & AO
Field Interface modules & IO cards of
PLC/DCS
Features:
— Highly flexible multicore Shielded/ Non-Shielded
Cable.
— Core cross section
0.14Sq.mm/0.25Sqmm/0.34Sq.mm.
— User specified Cable lengths.
— System Side of Prefab Cable duly ferruled & crimped
lugs.
— User specified ferruling as per requirement.
— Plug-in Connector options- D Sub M/F, IDC/FRC/ELCO.
Technical Data:
Pre-fab cable with D-sub & FRC connectors
No. of Core 20/40 Core Shielded (LIYCY)/Non- Shielded( LIYY)
Conductor Material Stranded Bare Copper (DIN VDE 0295 class code)
Insulation Material & colour PVC (Polyvinyl Chloride) DIN 47100 Color
Jacket/sheath material PVC (Polyvinyl Chloride)
Voltage rating (U0/U) At 0.14 mm²:350 V≥0.24 mm² : 500 V
Shielded if applicable Tinned Copper Braid Shielded
Oil Resistance DIN EN 50290-2-22 (TM54)
Temperature Range -40°C to +80°C (Fixed installation)
Bending Radius 6 x OD (Fixed installation)
Nom. mutual capacitance 120nf/km
Nominal Inductivity 0.50mH/km
Insulation resistance >20 GOhm x cm
Flame / Fire Retardancy if applicable IEC 60332-1
Nominal voltage UL: 300V RMS Non-UL: 500V (Not for Power application)
UL Approvals Available On Request
RoHS Compliant Yes
Other Options Available in Prefab Cable
www.ulepl.com 34
Panel Accessories Modules
Utility Module with ON/OFFControl for tube lights and fans
General Data:
Input Supply 230VAC/110VAC, 5 Amp.
Utility Socket Universal, 230VAC, 5/15 Amp
Utility ON/OFF Rocker Switch (Illuminated)
Termination for One input terminal & 2 Output terminal
front & rear Tubes (110VAC/230VAC)
Termination One input terminal & 2 Output terminal
for front & rear Fans (110VAC/230VAC)
Protection Short circuit protection using fuse in each load
for tube & fans
ON/OFF Toggle Switch
control for Tube /Fans
Dimensions (LXWXH) 137mm × 90mm × 65mm
Mounting Universal Rail mounting
Screw- terminals UL, CSA Standard & CE standard
Part no. UL-UTILITY V1
Power Distribution Module General Data:

Incoming Feeder Terminal One Push Lock Spring Connection Terminal
Incoming Feeder Rating 68 Amp
Power ON Status Green LED
Outgoing Feeder's 8 No's with spring-cage Connection
Outgoing Feeder's 24V DC,6.3A (Fast blown type)
Fuse rating
Outcoming Feeder's Red LED for blown fuse indication per
Fuse monitoring channel
Alarm Signal Common Opto-Isolated Alarm contact to
indicate fuse fail or power fault status.
Fuse Type 5 x 20mm Glass Fuse
Opto-coupler 60mA @ 24VDC
output Rating
Dimension (L × W × H) 112mm × 90mm × 90mm
Mounting Universal rail
Part no UL24D08PDB-OFI-ALM-V1
Diode Oring Modules General Data:

Diode Oring Module Low Cost Diode Oring module suitable
redundant Power supplies
Voltage Rating 24VDC/110VDC/220VDC
No. of channels One
Signal Mode Redundant
Output Current Available in 10Amp, 20Amp & 40 Amp.
Diode Specification Type Stud Screw Fit- Standard Recovery diode
VRSM 1200/1600 Volt.
IFAV 16/25/45/70 Amp.
PCB design UL standard ANSI IPC 2221, 2222 & MIL 275B
Part no On request
Ordering Code On request
www.ulepl.com 35
Diode Oring Module (Plastic Enclosure)
Technical Data:
Diode Oring Modules UL-RD-5A UL-RD-10A
Type Redundant Diode Oring Module
Input Signal 1 24VDC/5A 24VDC/10A
Output Signal 24VDC/5A 24VDC/10A
Relay Outputs Two Relays monitoring the status of two power
inputs.
Contact Rating 10A @ 230 VAC (Resistive loads)
Features: Indication LEDs for two Inputs and one Output
l Slim, compact, and rugged execution. Dimensions [HXWXD] 75 x 55 x110 mm 75 x 100 x110 mm
l Standard DIN rail mount execution. Execution DIN Rail mounting
l The Diode Oring Module has the Enclosure Industrial grade ABS enclosure
additional function of monitoring the Part no. UL-RD-5A UL-RD-10A
healthy status of the two power supply Ordering Code 091010100031 091010100032
inputs connected to it.
l Potential free Relay changeover contact
provided in the event of failure of any one
or both of the Input power supplies.
Diode Oring Module (Metallic Enclosure)
Technical Data:
Diode Oring Modules UL-RD-10A-M UL-RD-20A-M
Type Redundant Diode Oring Module
Output Signal 24VDC/10A 24VDC/20A
Control Output Two Relay change over contacts
Load Current 10 Amp. 20 Amp.
Indication Green LED for Input
Red LED for Output
Dimensions [HXWXD] 124 x40 x112.5 mm 124 x 63 x113.5 mm
Execution DIN Rail/ WaII mounting
Enclosure Industrial grade metal enclosure
Features: Operating Temperature 0 to + 70°C
Part no. UL-RD-10A-M UL-RD-20A-M
l High output load regulation Ordering Code 091010100041 091010100045
l Rugged, industrial grade ABS and metal
enclosure
l High Noise immunity
l DIN rail mounting
l High efficiency and high reliability
l Dual Redundancy option
l Fuse Protection for High Current
www.ulepl.com 36
Fan Failure Detection Module for 2 Fans with Temperature Monitoring
Technical Data:
Input Inbuilt Electronic temperature sensor.
Temperature Display Three 0.4” inch seven-segment red LED displays.
Measuring 000-099˚ C
Temperature Range
Key board 3 x Keys
Analog Output 4 to 20 mA DC (configurable to any temperature
between value of 0 to 99°C)
External Relays Relay 1 & 2 for AC Powered Contact for Fan 1 & 2
respectively
Relay 3 for Temperature high alarm Relay
Relay 4 for fan failure Relay.
Control Output 2 AC Fans (90 to 270V AC supply to individual
Features: Fans)
Protection Fan Short Circuit protection at Output &
— Microcontroller based design.
Overvoltage protection at input
— Auto Current Sending technology.
Indications a) 2 Bicolor LED's (Red & Green for Fan Status)
— 2-digit 7 segment LED display.
b) Red LED for Fan fail or Temperature alarm
— Retransmission option 4-20mA. conditions
— Universal Input 90-270VAC. Failure Detection Fan Stuck/stop open circuit Temperature sensor fail
— Bi-colour LED's for Fan status. Power Supply 90 to 270V AC, 50/60 Hz
— Over voltage protection. Fan Current Range Min. 80mA /Max. 500mA AC
— 4- External relays for Fan Powered Dimensions 75 x 55 x 110 mm [H x W x D].
Contact, fan fail & temp. fail Enclosure Polycarbonate.
— Din Rail Mountable. Mounting DIN Rail
Part no. UL02-FFTDU-ALM-4-20MA
Fan Failure Detection Module for 4 Fans with Temperature Monitoring
Technical Data:
Input Built-in Electronic Temperature Sensor
Display Two 0.4" inch seven segment red LED displays
Measuring 0-99˚ C
Temperature Range
Key board 3 x Keys
Analog Output 4 to 20 mA DC (configurable to any temperature
between value of 0 to 99°C)
External Relays 4x Relay ( AC powered contacts for fan 1,2,3 & 4)
1x Relay (For Fan Fail alarm contact – common for
all Fans)
Features: 1x Relay (For Higher Temperature alarm contact)
— Microcontroller based design. Control Output 4 AC Fans (90 to 270V AC supply to individual Fans)
— Auto Current Sending technology. Protection Fan Short Circuit protection at Output &
— 2-digit 7 segment LED display. Overvoltage protection at input
— Retransmission option 4-20mA. Indications a) 4 Bicolor LED's (Red & Green for Fan Status)
— Universal Input 90-270VAC. b) Red LED for Fan fail or Temperature alarm
— Bi-colour LED's for Fan status. conditions
— Over voltage protection. Failure Detection Fan Stuck/ stop open circuit Temperature sensor fail
— 6- External relays for Fan Powered Power Supply 90 to 270V AC, 50/60 Hz
Contact fan fail or temp. fail Fan Current Range Min. 80mA /Max. 500mA AC
— Din Rail Mountable. Dimensions 75 x 100 x 110 mm [H x W x D].
Enclosure Polycarbonate.
Mounting DIN Rail
Part no. UL04-FFTDU-ALM-4-20MA
www.ulepl.com 37
Digital Thermostat
Technical Data:
Type Rack/Panel Temperature monitoring unit with
Relay contacts.
Input Signal Precision Electronic Temperature Sensor
(built-in).
Control Output Potential-free Relay Change–over contacts
Contact Rating 7 Amp @ 230 VAC (Resistive Loads).
Setting By two-keys tactile keypad.
Indication Digital temperature readout.
Display 0.4” LED Bright red Three-digit seven-segment
display.
Features: Power Supply 230 VAC, 50 Hz.
l Slim, compact and rugged execution. Dimensions 35 x 75 x 50 mm (W x H x D)
l Precision temperature indication. Execution Din Rail Mounting
l Provision to set alarm level. Ambient temp 0 to 50°C
l Relay change over contacts for alarm Part no. UL-ATS40
conditions. Ordering Code 091010100055
l Standard DIN rail mount execution.
l Built in electronic temperature sensor.
l AC power supply.
l Bright red digital Temperature readout.
l Easy set-up with frontal keypad
Temperature Monitoring Unit
Technical Data:
Type Rack Temperature monitoring unit with relay
contact and retransmission
Input Signal Electronics built-in sensor
Control Output Relay changeover contact rating
Retransmission output 4 to 20mA DC
Load Driving Capacity 600 Ohms
Contact Rating 2 Amp @ 230 VAC
Setting By three-key front keypad.
Indication Digital temperature readout.
Display 0.30” LED Bright red.
Features: Power Supply 90 to 270 V AC, 50/60 Hz.
l Slim, compact and rugged execution. Dimensions 75 x 22 x 110 (HXWXD)
l Precision temperature indication. Execution Din Rail Mounting
l Provision to set alarm level. Ambient temp 0 to 50°C
l Relay change over contacts for alarm Part no. UL-TM50
conditions. Ordering Code 091010100005
l Analog signal retransmission of
temperature value
l Standard DIN rail mount execution.
l Built in electronic temperature sensor.
l AC power supply.
l Bright red digital Temperature readout.
l Easy set-up with frontal keypad
www.ulepl.com 38
Fiber Optic Patch Panels
Din Rail Mount LIU
Technical Data:
Mild Steel / Aluminum with 7 Tank Process
Material
powder coating
Color Grey / Black
Splice Holder FR grade ABS/NYLON.
Fiber components
Telecordia GR 326
standard
Ordering Details
Model Product Dimension in mm Model Number
Description (H x W x D)
NANO 6 Port Din rail 130 x 65 x 105 ULFOPP-6P-DIN-NN-SCSM-SPX
Mount ULFOPP-6P-DIN-NN-SCSM-DPX
Loaded LIU ULFOPP-6P-DIN-NN-SCMM-SPX
ULFOPP-6P-DIN-NN-SCMM-DPX
ULFOPP-6P-DIN-NN-STSM-SPX
ULFOPP-6P-DIN-NN-STMM-SPX
ULFOPP-6P-DIN-NN-LCSM-DPX
Features: ULFOPP-6P-DIN-NN-LCMM-DPX
l MS/Aluminum housing with 7 tank ULFOPP-6P-DIN-NN-FCSM-SPX
process powder coating. ULFOPP-6P-DIN-NN-FCMM-SPX
l Compact size perfect for limited space Din
Rail mount enclosures. MICRO 8 Port Din rail 150 x 105 x 120 ULFOPP-8P-DIN-MC-SCSM-SPX
l Suitable for DIN Rail & Surface mount Mount ULFOPP-8P-DIN-MC-SCSM-DPX
Loaded LIU ULFOPP-8P-DIN-MC-SCMM-SPX
Applications.
l Replaceable panel for SC/ST/LC/FC type ULFOPP-8P-DIN-MC-SCMM-DPX
couplers. ULFOPP-8P-DIN-MC-STSM-SPX
l Allow maximum 2 cables entry. ULFOPP-8P-DIN-MC-STMM-SPX
l Patch or Fusion splice field termination ULFOPP-8P-DIN-MC-LCSM-DPX
standard. ULFOPP-8P-DIN-MC-LCMM-DPX
l Splice holder for pigtail splicing. ULFOPP-8P-DIN-MC-FCSM-SPX
l Available with metal DIN-Rail mount for ULFOPP-8P-DIN-MC-FCMM-SPX
industrial high temperature applications
and conditions. MINI 12 Port Din 210 x 50 x 150 ULFOPP-12P-DIN-MN-SCSM-SPX
l Because of its compact and ruggedly rail Mount ULFOPP-12P-DIN-MN-SCSM-DPX
Loaded LIU ULFOPP-12P-DIN-MN-SCMM-SPX
designed case it is suitable for industrial
applications. ULFOPP-12P-DIN-MN-SCMM-DPX
ULFOPP-12P-DIN-MN-STSM-SPX
ULFOPP-12P-DIN-MN-STMM-SPX
ULFOPP-12P-DIN-MN-LCSM-DPX
ULFOPP-12P-DIN-MN-LCMM-DPX
Application:
ULFOPP-12P-DIN-MN-FCSM-SPX
l Oil & Gas Industries ULFOPP-12P-DIN-MN-FCMM-SPX
l CCTV & Surveillance
l Rail Signaling & control MEDIUM 24 Port Din 285 x 90 x 205 ULFOPP-24P-DIN-MD-SCSM-SPX
l Process Automation rail Mount ULFOPP-48P-DIN-MD-SCSM-DPX
l Toll Systems Loaded LIU ULFOPP-24P-DIN-MD-SCMM-SPX
l Power Systems & Controls ULFOPP-48P-DIN-MD-SCMM-DPX
ULFOPP-24P-DIN-MD-STSM-SPX
ULFOPP-24P-DIN-MD-STMM-SPX
ULFOPP-48P-DIN-MD-LCSM-DPX
ULFOPP-48P-DIN-MD-LCMM-DPX
ULFOPP-24P-DIN-MD-FCSM-SPX
ULFOPP-24P-DIN-MD-FCMM-SPX
ULFOPP-12P-DIN-MN-SCSM-SPX
ULFOPP-12P-DIN-MN-SCSM-DPX
For example, ULFOPP-6P-DIN-NN-STSM-SPX :

FOPP- Fiber optic patch panel; 6P– 6 Port ;8P- 8 Port; 12P-12 Port; 24P-24 Port; 48P- 48 Port; DIN-Din rail ; NN- Nano; MC-Micro; MN-Mini;
MD-Medium; SC/ST/LC/FC- connector Type; SM-single Mode; MM-multi Mode; SPX- Simplex; DPX-Duplex.
Note: Fiber optic patch panel with aluminum casting will be available on request.
www.ulepl.com 39
WALL MOUNT LIU
Technical Data:
Material Mild Steel/ Aluminum with 7 Tank Process
powder coating
Color Grey / Black
Fiber components Telecordia GR 326
standard
Ordering Details
WALL 6/8 Port wall 260 x 230 x 60 ULFOPP-6P-WM-SCSM-SPX
Mount ULFOPP-6P-WM-SCSM-DPX
Loaded LIU ULFOPP-6P-WM-SCMM-SPX
ULFOPP-6P-WM-SCMM-DPX
ULFOPP-6P-WM-STSM-SPX
ULFOPP-6P-WM-STMM-SPX
ULFOPP-6P-WM-LCSM-DPX
Features: ULFOPP-6P-WM-LCMM-DPX
l MS/Aluminum housing with 7 tank ULFOPP-6P-WM-FCSM-SPX
process powder coating. ULFOPP-6P-WM-FCMM-SPX
l Compact size perfect for limited space
enclosures. WALL 12 Port Wall 310 x 250 x 60 ULFOPP-12P-WM-SCSM-SPX
l Suitable for Din rail & Surface mount
Applications.
l Replaceable panel for SC/ST/LC/FC type ULFOPP-12P-WM-SCMM-DPX
couplers. ULFOPP-12P-WM-STSM-SPX
l Allow maximum 4 cables entry. ULFOPP-12P-WM-STMM-SPX
l Patch or Fusion splice field termination ULFOPP-12P-WM-LCSM-DPX
standard. ULFOPP-12P-WM-LCMM-DPX
l Splice holder for pigtail splicing. ULFOPP-12P-WM-FCSM-SPX
l Can be used as 24 port patch panel ULFOPP-12P-WM-FCMM-SPX
using LC/SC Duplex couplers.
WALL 24 Port Wall 350 x 300 x 60 ULFOPP-24P-WM-SCSM-SPX
Application: ULFOPP-24P-WM-SCMM-DPX
l Oil & Gas Industries ULFOPP-24P-WM-STSM-SPX
l Central offices (FTTX) ULFOPP-24P-WM-STMM-SPX
l Telecommunication Networks ULFOPP-24P-WM-LCSM-DPX
l Process Automation ULFOPP-24P-WM-LCMM-DPX
l Security Surveillance ULFOPP-24P-WM-FCSM-SPX
l Power Systems & Controls ULFOPP-24P-WM-FCMM-SPX
WALL 48 Port wall 350 x 300 x 110 ULFOPP-48P-WM-SCSM-SPX

ULFOPP-48P-WM-SCMM-DPX
ULFOPP-48P-WM-STSM-SPX
ULFOPP-48P-WM-STMM-SPX
ULFOPP-48P-WM-LCSM-DPX
ULFOPP-48P-WM-LCMM-DPX
ULFOPP-48P-WM-FCSM-SPX
ULFOPP-48P-WM-FCMM-SPX
For example, ULFOPP-8P-WM-SCSM-DPX :

FOPP- Fiber optic patch panel; 6P– 6 Port ; 8P- 8 Port; 12P-12 Port; 24P-24 Port; 48P- 48 Port; WM-Wall Mount ; SC/ST/LC/FC- Connector Type;
SM-single Mode; MM-multi Mode; SPX- Simplex; DPX-Duplex
www.ulepl.com 40
RACK MOUNT LIU
Technical Data:
powder coating
Color Grey / Black
standard
Ordering Details
MINI 6 Port Rack 44 x 210 x 150 ULFOPP-6P-RM-MN-SCSM-SPX
RACK Mount ULFOPP-6P-RM-MN-SCSM-DPX
Loaded LIU ULFOPP-6P-RM-MN-SCMM-SPX
ULFOPP-6P-RM-MN-SCMM-DPX
Features: ULFOPP-6P-RM-MN-STSM-SPX
l MS/Aluminum housing with 7 tank ULFOPP-6P-RM-MN-STMM-SPX
process powder coating. ULFOPP-6P-RM-MN-LCSM-DPX
l Replaceable panel for SC/ST/LC/FC type ULFOPP-6P-RM-MN-LCMM-DPX
couplers. ULFOPP-6P-RM-MN-FCSM-SPX
l Capable of storing up to 3 meters of 900- ULFOPP-6P-RM-MN-FCMM-SPX
micron tight buffered fiber cable.
l Allow maximum 6 cables entry. 1U STD 12/24 Port 44 x 430 x 320 ULFOPP-24P-RM-1U-SCSM-SPX
RACK Rack Mount ULFOPP-24P-RM-1U-SCSM-DPX
l Patch or Fusion splice field termination
Loaded LIU ULFOPP-24P-RM-1U-SCMM-SPX
standard.
l High impact resistance splicing tray & ULFOPP-24P-RM-1U-SCMM-DPX
cable spool for fiber & pigtail routing. ULFOPP-24P-RM-1U-SCSM-DPX
ULFOPP-24P-RM-1U-SCMM-DPX
ULFOPP-24P-RM-1U-STSM-SPX
ULFOPP-24P-RM-1U-STMM-SPX
ULFOPP-24P-RM-1U-LCSM-DPX
ULFOPP-24P-RM-1U-LCMM-DPX
ULFOPP-24P-RM-1U-FCSM-SPX
Application: ULFOPP-24P-RM-1U-FCMM-SPX
l Indore Premise Networks
l Central offices (FTTX) 2U RACK 48 Port Rack 88 x 430 x 320 ULFOPP-48P-RM-2U-SCSM-SPX
l Telecommunication Networks Mount ULFOPP-48P-RM-2U-SCSM-DPX
l Security Surveillance
l Process Automation ULFOPP-48P-RM-2U-SCMM-DPX
l Power Systems & Controls ULFOPP-48P-RM-2U-SCSM-DPX
ULFOPP-48P-RM-2U-FCMM-SPX
4U RACK 96 Port Rack 176 x 440 x 350 ULFOPP-96P-RM-4U-SCSM-SPX

Mount ULFOPP-96P-RM-4U-SCSM-DPX
ULFOPP-96P-RM-4U-FCMM-SPX
For example, ULFOPP-24P-RM-2U-LCSM-DPX:
FOPP- Fiber optic patch panel; 6P– 6 Port ; 12P-12 Port; 24P-24 Port; 48P- 48 Port; RM-Rack Mount ; MN- Mini; 1U/2U/4U- Rack Size;
SC/ST/LC/FC- Connector Type; SM-single Mode; MM-multi Mode; SPX- Simplex; DPX-Duplex
www.ulepl.com 41
SLIDING RACK MOUNT LIU
Technical Data:
powder coating
Color Grey / Black
standard
Ordering Details
1U 12/24 Port 44 x 335 x 320 ULFOPP-12P-SRM-1U-SCSM-SPX
SLIDING Sliding Rack ULFOPP-12P-SRM-1U-SCSM-DPX
RACK Mount
ULFOPP-12P-SRM-1U-SCMM-SPX
Loaded LIU
ULFOPP-12P-SRM-1U-SCMM-DPX
Features: ULFOPP-24P-SRM-1U-SCSM-DPX
l MS/Aluminum housing with 7 tank ULFOPP-24P-SRM-1U-SCMM-DPX
process powder coating. ULFOPP-12P-SRM-1U-STSM-SPX
l Replaceable panel for SC/ST/LC/FC type ULFOPP-12P-SRM-1U-STMM-SPX
couplers. ULFOPP-24P-SRM-1U-LCSM-DPX
l Capable of storing up to 3 meters of 900- ULFOPP-24P-SRM-1U-LCMM-DPX
micron tight buffered fiber cable. ULFOPP-12P-SRM-1U-FCSM-SPX
l Allow maximum 6 cables entry. ULFOPP-12P-SRM-1U-FCMM-SPX
l Patch or Fusion splice field termination
standard. 2U 48 Port Sliding 88 x 335 x 320 ULFOPP-48P-SRM-2U-SCSM-SPX
l High impact resistance splicing tray & SLIDING Rack Mount ULFOPP-48P-SRM-2U-SCSM-DPX
RACK Loaded LIU
cable spool for fiber & pigtail routing. ULFOPP-48P-SRM-2U-SCMM-SPX
ULFOPP-96P-SRM-2U-SCSM-DPX
ULFOPP-48P-SRM-2U-STSM-SPX
ULFOPP-48P-SRM-2U-STMM-SPX
ULFOPP-96P-SRM-2U-LCSM-DPX
Application:
ULFOPP-96P-SRM-2U-LCMM-DPX
l Indore Premise Networks ULFOPP-48P-SRM-2U-FCSM-SPX
l Central offices (FTTX) ULFOPP-48P-SRM-2U-FCMM-SPX
l Telecommunication Networks
l Security Surveillance 4U 96 Port Sliding 176 x 440 x 350 ULFOPP-96P-SRM-4U-SCSM-SPX
l Process Automation SLIDING Rack Mount ULFOPP-96P-SRM-4U-SCSM-DPX
l Power Systems & Controls RACK Loaded LIU ULFOPP-96P-SRM-4U-SCMM-SPX
ULFOPP-96P-SRM-4U-STSM-SPX
ULFOPP-96P-SRM-4U-STMM-SPX
ULFOPP-96P-SRM-4U-FCSM-SPX
ULFOPP-96P-SRM-4U-FCMM-SPX
For example, ULFOPP-12P-SRM-1U-FCSM-SPX:

FOPP- Fiber optic patch panel; 12P-12 Port; 24P-24 Port; 48P- 48 Port; 96P– 96 Port; RM-Rack Mount ; SRM-Sliding Rack Mount; 1U/2U/4U-
Rack Size; SC/ST/LC/FC- Connector Type; SM-Single Mode; MM-Multi Mode; SPX- Simplex; DPX-Duplex
www.ulepl.com 42
Fiber Optic Patch Cables
Simplex and Duplex Patch cords
Technical Data:
Technical Application Description Ordering Part code
Fiber Type :Single Mode
Single-mode fiber optic cables have a yellow jacket. OS1 Single Mode FOPC-SM-SC-SC-DPX-XX
and OS2 fiber optic cable support Gigabit and 10G 9/125 SC-SC
Ethernet links Duplex Patch FOPC-SM-SC-LC-DPX-XX
Cable
FOPC-SM-LC-LC-DPX-XX
FOPC-SM-SC-ST-DPX-XX
Fiber Type :Multimode (OM1/OM2)

OM1 fiber typically comes with an orange jacket and Multi-Mode FOPC-MM2-SC-SC-DPX-XX
have a core size of 62.5uM, it can support10 Gigabit 62.5/125 SC-SC
Ethernet at lengths of up to 33 meters. It is most Duplex Patch FOPC-MM2-SC-LC-DPX-XX
commonly used for 100 Megabit Ethernet applications. Cable
FOPC-MM2-LC-LC-DPX-XX
FOPC-MM2-SC-ST-DPX-XX
Fiber Type :Multimode (OM3)

OM2 fiber also comes with an Turquoise jacket and Multi-Mode FOPC-MM3-SC-LC-DPX-XX
uses a LED light source but with a smaller core size of 50 50/125 SC-LC
µm. It supports up to 10 Gigabit Ethernet at lengths up to Duplex Patch FOPC-MM3-LC-LC-DPX-XX
82 meters but is more commonly used for 1 Gigabit Cable
Ethernet applications. FOPC-MM3-SC-ST-DPX-XX
Fiber Type :Multimode (OM4)

OM4 fiber is completely backwards compatible with OM3 Multi-Mode FOPC-MM4-SC-LC-DPX-03
fiber and shares the same distinctive aqua jacket. OM4 50/125 SC-LC
was developed specifically for VSCEL laser transmission Duplex Patch FOPC-MM4-LC-LC-DPX-03
and allows 10 Gig/s link distances of up to 550m Cable
FOPC-MM4-SC-ST-DPX-03
compared to 300M with OM3. And it's able to run
40/100GB up to 150 meters utilizing a MPO connector. FOPC-MM4-SC-LC-DPX-03
Ordering Information
Part No. Abbreviation & Description:
FOPC-XX-YY-ZZ-PPX-OOO
FOPC : Fiber Optic Patch Cord
XX : SM - Singlemode 9/125um
MM2- Multimode 50/125um (OM1/OM2)
MM3- Multimode 50/125um (OM3) OR
MM4- Multimode 50/125um (OM4)
YY-ZZ : YY Indicate type of connector at one end &
ZZ Indicate type connector at another end. Fox Exp.
SC-SC OR SC-LC OR LC-LC OR SC-ST
PPX : Fiber Patch Cable type SPX OR DPX (Simplex OR Duplex)
OOO : Indicate Length of Patch cord in MTR Fox Exp. 001 /010 – 1 Mtr to 10 Mtr.
Note: All FO Patch Cable Outer Jacker material is LSZH type

www.ulepl.com 43
Customized Solutions
List of Customized Interface Modules
16 Channel DI Slim relay module 16 Point 16 Channel Relay module with MSTB
with miniature fuse RJ-45 module Plug-in type terminals
16 Channel DI module with rail 50 Pin Honda Connector 16 Channel DO Auto-test Redundant
mounting Terminals at field side Module for Robots Module with Modbus communication port
16 Chnannel DI Relay module with DI

32 channel DI module with 16 Channel Pulse Generator module redundancy and one pot free contact
Molex connector with 1ms delay for SOE module on D sub connector
www.ulepl.com 44
List of Customized Interface Modules
8 Channel AI module with Genset ON/OFF 16 Channel FTA for

TR disconnector Relay Module IOTA module
MTL MPG BOX with Selector EOL WITH CABLE

LFDDI FTA swithc and Spira
24 PORT Aluminium black Customiszed Relay 8 Channel fuse board

compact LIU with open logic board with ON/Off Switch
www.ulepl.com 45
List of Customized Prefabricated Cables Assemblies
Prefab cable with D sub connector at one Prefab cable with IOTA connector Prefab cable with D sub connector at
end and IOTA connectors at other end at both ends one end and IOTA connector at other end
Prefab Cable with 20pin MSTB Prefab cable with both side Prefab cable with ELCO connector at one
Plug-in Terminal & Lugs at other end ELCO connector end and IOTA connector at other end
STP/UTP CNC cable with 20 pin PCR connector at Prefab cable with ELCO connector at
Cable harness one end & D connector at other end one end and flying leads at other end
www.ulepl.com 46
Advantages of Modular Wiring Solutions
Conventional
Wiring Hardware
Relay
LED Kit
Freewheeling
Diode Kit
Relay Socket
Clip
Easy Wiring Cost
AI FIM DO FIM
Modular Wiring
Optimization
Fused TB Hardware
Normal TB Field Interface module
Markers for DI, DO, AI & AO
Prefab Cables Field Transmitter
Solenoid Valve
Looping 2W/4W
Minimum Inputs required to propose the

Modular Wiring Solution
Digital Inputs: (16/32) Digital Output:(16 Ch)
Ÿ Field Interrogation Ÿ Relay 1C/O, 2C/O
Ÿ Fuse Protection Ÿ with /without fuse
Ÿ Relay /Opto-Isolation Ÿ Pot Free/Wetted Control Valve
Ÿ Non-red/Redundant Ÿ Non-red/Redundant
Prox. Sensors
Ÿ Prefab Cable length Ÿ Prefab Cable length
AO FIM Prefab Cables DI FIM
Analog Inputs: (8/16) Analog Output (8 Ch)

Ÿ Fuse Protection Ÿ Fuse protection
Ÿ Isolation (Ch.to Ch) Ÿ Isolation
Ÿ Non-red/Redundant Ÿ Non-red/Redundant
Ÿ Prefab Cable length Ÿ Prefab Cable length
Time Saving Space Saving

Single core connection
- cut
Conventional wiring Vs. Modular Wiring
Conventional wiring Vs. Modular Wiring
- strip
280 mm
- terminate
416 mm
per Signal 3 minutes

96 minutes for
32 Signals
PLC System Cabling 30% Space

Saving
- Simply plugit in !
3 minutes for 32 Signals- 64 Terminal 32 Channel FIM with

(32 Screw + 32 Fuse TB) Fuse & Fuse fail LED
32 Signals (Size 5.5MM + 7.5MM=13MM)
Total Space : 280MM
Reduction of 90 % Total Space for 64TB
13 x 32 = 416 MM
UL Automation Systems Pvt. Ltd.
Nirman Classic, Katraj-Kondhwa Road, Katraj, Pune – 411046, INDIA.
: +91 20 26960040/50/60 | 9860012465
UL GROUP : marketing@ulepl.com
Nothing's Complex : www.ulepl.com Follow Us:

Transfer Function

Uploaded by

Copyright:

Available Formats

Transfer Function

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Transfer Function

Uploaded by

Copyright:

Available Formats

Industrial

Modular Wiring Solution Available For Leading Automation Gaints

Conventional (Manual) Wiring Modular Wiring • Honeywell

Tightening torque 0.6 Nm Max. 16 UL24D16-COB-V2 086010200016 260 x 90

Note: •Relay Coil Voltage with 48VDC,110VDC are available on request.

— Universal Rail mounting.

Note: • Relay Coil Voltage with 48VDC,110VDC are available on request.

— Universal Rail mounting.

Tightening torque 0.6 Nm Max.

Note: • Relay Coil Voltage with 48VDC,110VDC are available on request.

— Universal Rail mounting.

Note: • Relay Coil Voltage with 48VDC,110VDC are available on request.

— Universal Rail mounting.

Note: • Relay Coil Voltage with 48VDC,110VDC are available on request.

Output Data Insulation resistance 1000MΩ at 500V DC

Tightening torque 0.6 Nm Max.

Field Side Termination Relay Socket

System Output Data Relay Data

Field Side Termination Relay Socket

Field Side Termination Relay Socket

Field Side Termination Relay Socket

System Output Data General Data

System Side Termination Auxiliary Power Supply

Selection Matrix For Analog Input Field Interface Module (Redundant)

Selection Matrix For Analog Output Field Interface Module (Non-Redundant)

Selection Matrix For Analog Output Field Interface Module (Redundant)

Current Signal Isolator

Type Analog signal Isolator.

Voltage Signal Isolator Technical Specification:

Signal Isolating Repeater Technical Specification:

Passive Interface Modules

Ordering Details Ordering Details

Note: Specify Prefab cable length while ordering.

Other Options Available in Prefab Cable

Utility Module with ON/OFFControl for tube lights and fans

Power Distribution Module General Data:

Diode Oring Modules General Data:

Diode Oring Module (Plastic Enclosure)

Diode Oring Module (Metallic Enclosure)

Fan Failure Detection Module for 2 Fans with Temperature Monitoring

Fan Failure Detection Module for 4 Fans with Temperature Monitoring

Temperature Monitoring Unit

Din Rail Mount LIU

For example, ULFOPP-6P-DIN-NN-STSM-SPX :

WALL MOUNT LIU

WALL 48 Port wall 350 x 300 x 110 ULFOPP-48P-WM-SCSM-SPX

For example, ULFOPP-8P-WM-SCSM-DPX :

RACK MOUNT LIU

4U RACK 96 Port Rack 176 x 440 x 350 ULFOPP-96P-RM-4U-SCSM-SPX

SLIDING RACK MOUNT LIU

For example, ULFOPP-12P-SRM-1U-FCSM-SPX:

Simplex and Duplex Patch cords

Fiber Type :Multimode (OM1/OM2)

Fiber Type :Multimode (OM3)

Fiber Type :Multimode (OM4)

Note: All FO Patch Cable Outer Jacker material is LSZH type

List of Customized Interface Modules

16 Chnannel DI Relay module with DI