Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    Barnes Layer Analysis: R 2par, Per Astm G 57 & Barnes Method

    Uploaded by

    Anonymous lv8SNRy
    The document describes a pipeline relocation route test in Ayer Keroh, Malacca. Four-pin Wenner array measurements were taken at depths of 1-3 meters to calculate layer resistivities using the Barnes layer analysis method. Graphs show the calculated layer resistivity values and an average resistivity curve.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Barnes Layer Analysis: R 2par, Per Astm G 57 & Barnes Method

    Uploaded by

    Anonymous lv8SNRy
    5 views1 page
    The document describes a pipeline relocation route test in Ayer Keroh, Malacca. Four-pin Wenner array measurements were taken at depths of 1-3 meters to calculate layer resistivities using the Barnes layer analysis method. Graphs show the calculated layer resistivity values and an average resistivity curve.

    Original Title

    C 1400

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a pipeline relocation route test in Ayer Keroh, Malacca. Four-pin Wenner array measurements were taken at depths of 1-3 meters to calculate layer resistivities using the Barnes layer analysis method. Graphs show the calculated layer resistivity values and an average resistivity curve.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    5 views1 page

    Barnes Layer Analysis: R 2par, Per Astm G 57 & Barnes Method

    Uploaded by

    Anonymous lv8SNRy
    The document describes a pipeline relocation route test in Ayer Keroh, Malacca. Four-pin Wenner array measurements were taken at depths of 1-3 meters to calculate layer resistivities using the Barnes layer analysis method. Graphs show the calculated layer resistivity values and an average resistivity curve.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 1

    BARNES LAYER ANALYSIS

    MAIN CONTRACTOR: ACE ENERGY SDN BHD

    TEST LOCATION: Ayer Keroh Melaka

    DATE: 20/05/2017
    TITLE : Pipeline Relocation Route in Ayer Keroh Malacca

    TESTERS: 1) Arzaine

    SRT No : Chainage 1400

    METHODOLOGY: r = 2paR, per ASTM G 57 & Barnes Method

    TEST INSTRUMENT: Digital Earth Tester Model Megger DET 5/4R

    Spacing 4 Pin Wenner Data Barnes Layer Analysis


    a R Spacing Resistivity 1/R D 1/R 1/(D 1/R) Spacing Layer Resistivity
    (m) (Ohms) Factor (Ohm-cm) (Mhos) (Mhos) (Ohms) Factor Layer (m) (Ohm-cm)
    1.0 21.5 628 13,509 0.047 n/a n/a n/a 0 - 1.0 13,509
    2.0 15 1,257 18,850 0.067 0.020 50.00 628 1.0 - 2.0 31,400
    3.0 9.74 1,885 18,359 0.103 0.036 27.78 628 2.0 - 3.0 17,446
    6.0 3,770 1,885 3.0 - 4.0
    9.0 5,655 1,885 4.0 - 5.0
    Resistivity (ohm.cm)

    (Table format from "Control of Pipeline Corrosion," by A. W. Peabody, pg. 91)

    LAYERRESISTIVITY

    R e s is t iv it y ( o h m .c m )
    35,0 0
    AVERAGE RESISTIVITY
    30, 0
    20,000
    f(x) = 4769.46400294966 ln(x) + 14057.3413405242 25,0 0
    18,000
    16,000 20, 0
    14,000 15,0 0
    12,000 10, 0
    10,000
    5,0 0
    8,000
    6,000 0
    4,000 1.0

    2,000 2.0
    0
    3.0
    1.0 2.0 3.0 6.0 9.0 Depth (m)
    6.0
    Depth (m)
    9.0

    You might also like