Job No Sheet No Rev

1
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Job Information
Engineer Checked Approved

Name:
Date: 26-Mar-24

Structure Type SPACE FRAME

Number of Nodes 49 Highest Node 73

Number of Elements 88 Highest Beam 128

Number of Basic Load Cases 4

Number of Combination Load Cases 1

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name

Primary 1 BS
Primary 2 BM
Primary 3 BH
Primary 4 BA
Combination 5 BS+BM+BH+BA

Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 0.20x0.20 400.000 13.3E+3 13.3E+3 22.5E+3 CONCRETE
2 Rect 0.20x0.20 400.000 13.3E+3 13.3E+3 22.5E+3 CONCRETE
3 RHS80X40X1.6 3.672 10.500 30.700 24.831 STEEL
4 RHS60X30X1.6 2.712 4.250 12.500 10.141 STEEL
5 SHS100X100X2.3 8.852 140.000 140.000 214.492 STEEL
6 RHS80X40X1.6 3.672 10.500 30.700 24.831 STEEL
7 RHS80X40X1.6 3.672 10.500 30.700 24.831 STEEL

Basic Load Cases

Number Name

1 BS
2 BM
3 BH
4 BA

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 1 of 76
 Job No Sheet No Rev
2
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Combination Load Cases

Comb. Combination L/C Name Primary Primary L/C Name Factor

5 BS+BM+BH+BA 1 BS 1.00
2 BM 1.00
3 BH 1.00
4 BA 1.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 2 of 76
 Job No Sheet No Rev
3
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 17 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 17 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.3 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 L4 -------------|
| KL/R-Y= 181.04 | L5 FA = 32.21 |
| KL/R-Z= 105.88 + L4 fa = 4.41 |
| UNL = 306.15 | L4 L4 FCZ = 141.22 |
| CB = 1.00 + L4 L5 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 33.94 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.83 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.78 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 3.831E-01 4 |
| 1.62 C 0.00 0.26 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
17 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.383 4
165.12 C 0.44 26.56 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 3 of 76
 Job No Sheet No Rev
4
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 18 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 18 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L5 L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 L4 -------------|
| KL/R-Y= 181.04 | L5 L4 FA = 32.21 |
| KL/R-Z= 105.88 + fa = 6.50 |
| UNL = 306.15 | L4 L5 FCZ = 155.34 |
| CB = 1.00 + L4 L5 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L1 fbz = 77.78 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.49 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.92 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 6.855E-01 4 |
| 2.39 C 0.01 0.60 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
18 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.685 4
243.54 C 1.47 60.88 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 4 of 76
 Job No Sheet No Rev
5
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 19 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 19 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L5 L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 L4 -------------|
| KL/R-Y= 181.04 | L5 L4 FA = 32.21 |
| KL/R-Z= 105.88 + fa = 10.20 |
| UNL = 306.15 | L4 L5 FCZ = 155.34 |
| CB = 1.00 + L4 L5 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 69.91 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.38 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.72 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 7.756E-01 4 |
| 3.75 C -0.01 -0.54 3.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
19 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.776 4
382.01 C -1.42 -54.72 3.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 5 of 76
 Job No Sheet No Rev
6
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 20 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 20 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS |L5 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 181.04 | L5 L4 FA = 32.21 |
| KL/R-Z= 105.88 + fa = 10.77 |
| UNL = 306.15 | L5 L5 FCZ = 141.22 |
| CB = 1.00 + L4 L5 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 28.24 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.95 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.64 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 5.349E-01 4 |
| 3.95 C 0.00 -0.22 3.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
20 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.535 4
403.23 C -0.40 -22.10 3.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 6 of 76
 Job No Sheet No Rev
7
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 21 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 21 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 181.04 | L4 L5 FA = 32.21 |
| KL/R-Z= 105.88 + fa = 10.77 |
| UNL = 306.15 | L5 L5 FCZ = 141.22 |
| CB = 1.00 + L5 L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 28.24 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.95 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.64 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 5.349E-01 4 |
| 3.95 C 0.00 -0.22 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
21 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.535 4
403.23 C -0.40 -22.10 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 7 of 76
 Job No Sheet No Rev
8
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 21 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 21 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 181.04 | FA = 32.21 |
| KL/R-Z= 105.88 + fa = 10.77 |
| UNL = 306.15 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 28.24 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.95 |
| DFF = 0.00 0.2 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.64 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 5.349E-01 4 |
| 3.95 C 0.00 -0.22 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
21 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.535 4
403.23 C -0.40 -22.10 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 8 of 76
 Job No Sheet No Rev
9
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 22 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 22 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L4 L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L4 L5 -------------|
| KL/R-Y= 181.04 | L4 L5 FA = 32.21 |
| KL/R-Z= 105.88 + fa = 10.20 |
| UNL = 306.15 | L5 L4 FCZ = 155.34 |
| CB = 1.00 + L5 L4 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 69.91 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.38 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.72 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 7.756E-01 4 |
| 3.75 C -0.01 -0.54 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
22 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.776 4
382.01 C -1.42 -54.72 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 9 of 76
 Job No Sheet No Rev
10
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 22 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 22 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 181.04 | FA = 32.21 |
| KL/R-Z= 105.88 + fa = 10.20 |
| UNL = 306.15 | FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L4 fbz = 69.91 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.38 |
| DFF = 0.00 0.5 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.72 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 7.756E-01 4 |
| 3.75 C -0.01 -0.54 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
22 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.776 4
382.01 C -1.42 -54.72 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 10 of 76
 Job No Sheet No Rev
11
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 23 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 23 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L4 L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L4 L5 -------------|
| KL/R-Y= 181.04 | L4 L5 FA = 32.21 |
| KL/R-Z= 105.88 + fa = 6.50 |
| UNL = 306.15 | L5 L4 FCZ = 155.34 |
| CB = 1.00 + L5 L4 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L1 fbz = 77.78 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.49 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.92 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-1 6.855E-01 4 |
| 2.39 C 0.01 0.60 3.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
23 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-1 0.685 4
243.54 C 1.47 60.88 3.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 11 of 76
 Job No Sheet No Rev
12
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 24 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 24 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.3 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- +L4 L5 -------------|
| KL/R-Y= 181.04 | L5 FA = 32.21 |
| KL/R-Z= 105.88 + L4 fa = 4.41 |
| UNL = 306.15 | L4 L4 FCZ = 141.22 |
| CB = 1.00 + L5 L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 33.94 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.83 |
| DFF = 0.00 0.0 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.78 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 3.831E-01 4 |
| 1.62 C 0.00 0.26 3.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
24 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.383 4
165.12 C 0.44 26.56 3.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 12 of 76
 Job No Sheet No Rev
13
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 33 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 33 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.4 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | L5 FA = 127.36 |
| KL/R-Z= 37.72 + L5 fa = 1.42 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L4 L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 L2 fbz = 84.27 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.35 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 6.079E-01 5 |
| 1.26 C 0.00 2.36 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
33 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.608 5
128.42 C 0.00 240.62 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 13 of 76
 Job No Sheet No Rev
14
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 34 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 34 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.5 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | L5 FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 1.86 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L4 L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L4 L2 L5 fbz = 86.22 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 6.46 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 6.695E-01 4 |
| 1.65 T 0.18 2.41 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
34 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.669 4
167.94 T 18.44 246.18 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 14 of 76
 Job No Sheet No Rev
15
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 35 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 35 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.6 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 37.72 | L4 FA = 127.36 |
| KL/R-Z= 37.72 + L4 fa = 2.43 |
| UNL = 150.00 | L4 FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 93.03 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 11.89 |
| DFF = 0.00 -0.1 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.35 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 7.620E-01 5 |
| 2.15 C -0.33 2.60 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
35 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.762 5
219.41 C -33.95 265.61 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 15 of 76
 Job No Sheet No Rev
16
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 36 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 36 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.7 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 37.72 | L4 FA = 127.36 |
| KL/R-Z= 37.72 + L4 fa = 2.10 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L5 L2 L4 fbz = 94.35 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 12.68 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 7.08 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 7.744E-01 5 |
| 1.86 C -0.35 2.64 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
36 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.774 5
189.70 C -36.20 269.38 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 16 of 76
 Job No Sheet No Rev
17
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 37 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 37 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.7 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 37.72 | L4 FA = 141.22 |
| KL/R-Z= 37.72 + L4 fa = 1.09 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L5 L5 L2 fbz = 95.36 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 7.27 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 6.830E-01 4 |
| 0.97 T 0.00 2.67 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
37 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.683 4
98.66 T 0.00 272.26 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 17 of 76
 Job No Sheet No Rev
18
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 38 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 38 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.7 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 37.72 | L4 FA = 127.36 |
| KL/R-Z= 37.72 + L4 fa = 2.10 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L5 L2 L4 fbz = 94.35 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 12.68 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 7.08 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 7.744E-01 5 |
| 1.86 C 0.35 2.64 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
38 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.774 5
189.70 C 36.20 269.38 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 18 of 76
 Job No Sheet No Rev
19
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 38 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 38 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.7 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 37.72 | FA = 127.36 |
| KL/R-Z= 37.72 + fa = 2.10 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 94.35 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 12.68 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 7.08 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 7.744E-01 5 |
| 1.86 C 0.35 2.64 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
38 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.774 5
189.70 C 36.20 269.38 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 19 of 76
 Job No Sheet No Rev
20
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 39 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 39 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.6 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 37.72 | L4 FA = 127.36 |
| KL/R-Z= 37.72 + L4 fa = 2.43 |
| UNL = 150.00 | L4 FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 93.03 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 11.89 |
| DFF = 0.00 -0.1 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.35 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 7.620E-01 5 |
| 2.15 C 0.33 2.60 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
39 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.762 5
219.41 C 33.95 265.61 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 20 of 76
 Job No Sheet No Rev
21
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 40 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 40 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 2.5 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | L5 FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 1.86 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L4 L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L4 L2 L5 fbz = 86.22 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 6.46 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 6.695E-01 4 |
| 1.65 T -0.18 2.41 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
40 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.669 4
167.94 T -18.44 246.18 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 21 of 76
 Job No Sheet No Rev
22
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 57 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 57 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 57 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 22 of 76
 Job No Sheet No Rev
23
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 58 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 58 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 58 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 23 of 76
 Job No Sheet No Rev
24
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 59 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 59 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 59 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 24 of 76
 Job No Sheet No Rev
25
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 60 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 60 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 60 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 25 of 76
 Job No Sheet No Rev
26
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 61 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 61 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 61 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 26 of 76
 Job No Sheet No Rev
27
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 62 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 62 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 62 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 27 of 76
 Job No Sheet No Rev
28
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 63 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 63 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 63 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 28 of 76
 Job No Sheet No Rev
29
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 64 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 64 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 0.00 |
|DESIGN CODE * | | AZ = 0.00 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.83 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.0 (KNS-METRE) |
|PARAMETER | STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 226.31 | FA = 0.00 |
| KL/R-Z= 132.35 + fa = 0.00 |
| UNL = 382.68 | FCZ = 0.00 |
| CB = 1.00 + FTZ = 0.00 |
| CMY = 0.00 | FCY = 0.00 |
| CMZ = 0.00 + FTY = 0.00 |
| FYLD = 23.54 | fbz = 0.00 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00****** Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 0.00 |
| fv = 5.46 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL L/R-EXCEEDS 1.132E+00 1 |
| 0.22 C 0.00 0.00 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 64 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL L/R-EXCEEDS 1.132

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 29 of 76
 Job No Sheet No Rev
30
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 65 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 65 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 60.96 | L5 FA = 141.22 |
| KL/R-Z= 35.65 + fa = 0.86 |
| UNL = 103.08 | L5 FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 +L4 L4 L5 FTY = 141.22 |
| FYLD = 23.54 | L4 L4 L5 fbz = 15.40 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.64 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.81 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.052E-01 5 |
| 0.32 T 0.00 0.12 1.03 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
65 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.105 5
32.19 T 0.00 12.05 1.03

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 30 of 76
 Job No Sheet No Rev
31
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 66 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 66 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 L5 -------------|
| KL/R-Y= 121.91 | L5 FA = 141.22 |
| KL/R-Z= 71.30 +L5 fa = 6.14 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L5 L5 FTZ = 155.34 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 53.32 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.24 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.867E-01 4 |
| 2.25 T 0.00 -0.41 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
66 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.387 4
229.79 T 0.00 -41.73 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 31 of 76
 Job No Sheet No Rev
32
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 68 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 68 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.5 (KNS-METRE) |
|PARAMETER | L4 L4 L4 STRESSES |
|IN KNS CMS | L4 L5 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 121.91 | L4 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 2.03 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 +L4 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 L5 fbz = 65.57 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.1 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.08 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 4.365E-01 4 |
| 0.74 T 0.00 0.50 1.55 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
68 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.436 4
75.94 T 0.00 51.32 1.55

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 32 of 76
 Job No Sheet No Rev
33
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 69 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 69 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 60.96 | L5 FA = 141.22 |
| KL/R-Z= 35.65 + fa = 0.88 |
| UNL = 103.08 | L5 FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 +L4 L4 L5 FTY = 141.22 |
| FYLD = 23.54 | L4 L4 L5 fbz = 14.44 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.09 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.83 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.069E-01 5 |
| 0.32 T -0.01 0.11 1.03 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
69 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.107 5
32.95 T -0.58 11.30 1.03

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 33 of 76
 Job No Sheet No Rev
34
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 70 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 70 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 L5 -------------|
| KL/R-Y= 121.91 | L5 FA = 141.22 |
| KL/R-Z= 71.30 +L5 fa = 7.02 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L5 L5 FTZ = 155.34 |
| CMY = 0.85 | L5 L4 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 46.83 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 9.39 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.10 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 4.176E-01 4 |
| 2.58 T 0.05 -0.36 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
70 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.418 4
262.69 T 5.03 -36.65 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 34 of 76
 Job No Sheet No Rev
35
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 71 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 71 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L4 L4 STRESSES |
|IN KNS CMS | L4 L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 121.91 | L4 L5 FA = 141.22 |
| KL/R-Z= 71.30 +L4 fa = 2.67 |
| UNL = 206.15 | FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 47.54 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 2.21 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.11 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.406E-01 4 |
| 0.98 T 0.01 0.36 1.37 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
71 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.341 4
99.82 T 1.18 37.21 1.37

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 35 of 76
 Job No Sheet No Rev
36
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 72 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 72 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 60.96 | L4 FA = 141.22 |
| KL/R-Z= 35.65 + L4 fa = 0.34 |
| UNL = 103.08 | L4 FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L5 L5 L5 L5 fbz = 46.14 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.74 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 3.07 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.117E-01 4 |
| 0.12 T -0.01 -0.35 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
72 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.312 4
12.57 T -0.93 -36.11 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 36 of 76
 Job No Sheet No Rev
37
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 73 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 73 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 60.96 | L5 FA = 141.22 |
| KL/R-Z= 35.65 + fa = 0.93 |
| UNL = 103.08 | L5 FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 |L1 L1 FCY = 141.22 |
| CMZ = 0.85 + L5 L3 FTY = 141.22 |
| FYLD = 23.54 | L5 L3 fbz = 11.22 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 2.56 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.64 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.90 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 9.695E-02 5 |
| 0.34 T -0.01 0.09 1.03 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
73 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.097 5
34.80 T -1.37 8.78 1.03

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 37 of 76
 Job No Sheet No Rev
38
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 74 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 74 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 L4 -------------|
| KL/R-Y= 121.91 | L5 L5 L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 7.33 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 L4 fbz = 15.94 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 19.73 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.64 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.942E-01 4 |
| 2.69 T 0.08 -0.12 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
74 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.294 4
274.34 T 8.29 -12.47 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 38 of 76
 Job No Sheet No Rev
39
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 75 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 75 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 121.91 | FA = 141.22 |
| KL/R-Z= 71.30 + fa = 1.55 |
| UNL = 206.16 | L5 FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | L5 L4 L5 L5 L4 FCY = 141.22 |
| CMZ = 0.85 + L5 L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 24.12 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 4.20 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.30 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.960E-01 5 |
| 0.57 T 0.02 0.19 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
75 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.196 5
57.92 T 2.25 18.87 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 39 of 76
 Job No Sheet No Rev
40
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 76 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 76 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 60.96 | L5 FA = 141.22 |
| KL/R-Z= 35.65 + fa = 0.93 |
| UNL = 103.08 | L5 FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 | L1 L1 FCY = 141.22 |
| CMZ = 0.85 + L3 L5 FTY = 141.22 |
| FYLD = 23.54 | L3 L5 fbz = 11.22 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 2.56 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.64 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.90 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 9.695E-02 5 |
| 0.34 T -0.01 0.09 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
76 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.097 5
34.80 T -1.37 8.78 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 40 of 76
 Job No Sheet No Rev
41
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 77 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 77 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 60.96 | L4 FA = 141.22 |
| KL/R-Z= 35.65 + L4 fa = 0.34 |
| UNL = 103.08 | L4 FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 |L5 L5 L5 L5 fbz = 46.14 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.74 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 3.07 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.117E-01 4 |
| 0.12 T -0.01 -0.35 1.03 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
77 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.312 4
12.57 T -0.93 -36.11 1.03

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 41 of 76
 Job No Sheet No Rev
42
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 78 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 78 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.5 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 121.91 | L4 L4 L4 L4 L5 FA = 141.22 |
| KL/R-Z= 71.30 + L4 fa = 6.37 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L4 L4 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 68.32 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 5.55 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.12 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 5.242E-01 4 |
| 2.34 T -0.03 -0.52 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
78 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.524 4
238.35 T -2.97 -53.47 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 42 of 76
 Job No Sheet No Rev
43
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 79 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 79 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.3 (KNS-METRE) |
|PARAMETER | L5 L5 L4 STRESSES |
|IN KNS CMS | L5 L5 IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 121.91 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 3.38 |
| UNL = 206.15 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | L4 L4 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 |L4 fbz = 40.15 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.48 |
| DFF = 0.00 0.1 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.50 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.187E-01 4 |
| 1.24 T 0.01 -0.31 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
79 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.319 4
126.62 T 0.79 -31.42 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 43 of 76
 Job No Sheet No Rev
44
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 79 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 79 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.3 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 121.91 | FA = 141.22 |
| KL/R-Z= 71.30 + fa = 3.38 |
| UNL = 206.15 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L4 fbz = 40.15 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.48 |
| DFF = 0.00 0.1 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.50 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.187E-01 4 |
| 1.24 T 0.01 -0.31 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
79 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.319 4
126.62 T 0.79 -31.42 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 44 of 76
 Job No Sheet No Rev
45
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 80 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 80 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 60.96 | L5 FA = 141.22 |
| KL/R-Z= 35.65 + fa = 0.88 |
| UNL = 103.08 | L5 FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L5 L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L5 L4 L4 fbz = 14.44 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.09 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.83 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.069E-01 5 |
| 0.32 T -0.01 0.11 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
80 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.107 5
32.95 T -0.58 11.30 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 45 of 76
 Job No Sheet No Rev
46
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 80 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 80 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 1.03 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 60.96 | FA = 141.22 |
| KL/R-Z= 35.65 + fa = 0.88 |
| UNL = 103.08 | FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 14.44 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.09 |
| DFF = 0.00 0.0 Fey = 284.10 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 830.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.83 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.069E-01 5 |
| 0.32 T -0.01 0.11 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
80 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.107 5
32.95 T -0.58 11.30 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 46 of 76
 Job No Sheet No Rev
47
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 97 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 97 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L5 L5 L5 L5 STRESSES |
|IN KNS CMS |L4 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 121.91 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 2.53 |
| UNL = 206.16 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 46.39 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.2 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.26 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.465E-01 4 |
| 0.93 T 0.00 -0.36 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
97 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.346 4
94.76 T 0.00 -36.31 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 47 of 76
 Job No Sheet No Rev
48
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 98 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 98 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS |L5 L4 L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 121.91 | L4 L4 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 5.86 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L4 L4 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 77.47 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.1 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.69 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 5.402E-01 4 |
| 2.15 T 0.00 -0.59 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
98 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.540 4
219.38 T 0.00 -60.63 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 48 of 76
 Job No Sheet No Rev
49
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 99 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 99 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.3 (KNS-METRE) |
|PARAMETER |L4 L5 L5 STRESSES |
|IN KNS CMS | L5 L5 IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 121.91 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 3.38 |
| UNL = 206.15 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | L4 L4 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 40.15 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.48 |
| DFF = 0.00 0.1 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.50 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.187E-01 4 |
| 1.24 T 0.01 -0.31 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
99 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.319 4
126.62 T 0.79 -31.42 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 49 of 76
 Job No Sheet No Rev
50
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 100 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 100 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.5 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 121.91 |L5 L4 L4 L4 L4 FA = 141.22 |
| KL/R-Z= 71.30 + L4 fa = 6.37 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L4 L4 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 68.32 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 5.55 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 5.12 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 5.242E-01 4 |
| 2.34 T -0.03 -0.52 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
100 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.524 4
238.35 T -2.97 -53.47 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 50 of 76
 Job No Sheet No Rev
51
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 101 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 101 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 121.91 | FA = 141.22 |
| KL/R-Z= 71.30 + fa = 1.55 |
| UNL = 206.16 | L5 FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 |L4 L5 L5 L4 L5 FCY = 141.22 |
| CMZ = 0.85 + L5 L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 24.12 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 4.20 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.30 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.960E-01 5 |
| 0.57 T 0.02 0.19 2.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
101 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.196 5
57.92 T 2.25 18.87 2.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 51 of 76
 Job No Sheet No Rev
52
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 102 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 102 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 0.88 |
| AISC-1989 * =============================== SY = 4.12 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- +L4 L5 -------------|
| KL/R-Y= 121.91 | L5 L5 L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 7.33 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L5 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 L5 fbz = 15.94 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 19.73 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.64 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.942E-01 4 |
| 2.69 T 0.08 -0.12 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
102 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.294 4
274.34 T 8.29 -12.47 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 52 of 76
 Job No Sheet No Rev
53
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 103 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 103 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L4 L4 STRESSES |
|IN KNS CMS | L4 L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 121.91 |L5 L4 FA = 141.22 |
| KL/R-Z= 71.30 + L4 fa = 2.67 |
| UNL = 206.15 | FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 47.54 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 2.21 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.11 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.406E-01 4 |
| 0.98 T 0.01 0.36 0.69 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
103 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.341 4
99.82 T 1.18 37.21 0.69

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 53 of 76
 Job No Sheet No Rev
54
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 104 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 104 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 L5 -------------|
| KL/R-Y= 121.91 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 7.02 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + L5 L5 FTZ = 155.34 |
| CMY = 0.85 | L4 L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 46.83 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 9.39 |
| DFF = 0.00 0.0 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.10 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 4.176E-01 4 |
| 2.58 T 0.05 -0.36 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
104 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.418 4
262.69 T 5.03 -36.65 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 54 of 76
 Job No Sheet No Rev
55
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 104 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 104 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 2.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 121.91 | FA = 141.22 |
| KL/R-Z= 71.30 + fa = 7.02 |
| UNL = 206.16 | FCZ = 155.34 |
| CB = 1.00 + FTZ = 155.34 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 46.83 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 9.39 |
| DFF = 0.00 0.2 Fey = 71.02 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.66 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.10 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 4.176E-01 4 |
| 2.58 T 0.05 -0.36 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
104 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.418 4
262.69 T 5.03 -36.65 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 55 of 76
 Job No Sheet No Rev
56
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 105 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 105 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- +L5 -------------|
| KL/R-Y= 122.28 | L4 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 6.91 |
| UNL = 153.07 | L5 L4 FCZ = 155.34 |
| CB = 1.00 + L4 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 44.78 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 5.70 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.45 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.775E-01 4 |
| 1.87 T -0.02 0.19 1.53 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
105 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.378 4
190.98 T -1.65 19.02 1.53

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 56 of 76
 Job No Sheet No Rev
57
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 106 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 106 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 122.28 | L4 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 7.14 |
| UNL = 153.07 | L4 FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 20.95 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 6.32 |
| DFF = 0.00 0.1 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.21 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.437E-01 4 |
| 1.94 T 0.02 0.09 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
106 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.244 4
197.51 T 1.83 8.90 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 57 of 76
 Job No Sheet No Rev
58
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 107 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 107 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + L4 -------------|
| KL/R-Y= 122.28 | L4 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 7.14 |
| UNL = 153.07 | L4 FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | L4 FCY = 141.22 |
| CMZ = 0.85 + L4 FTY = 141.22 |
| FYLD = 23.54 |L4 fbz = 20.95 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 6.32 |
| DFF = 0.00 0.1 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.21 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.437E-01 4 |
| 1.94 T 0.02 0.09 1.53 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
107 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.244 4
197.51 T 1.83 8.90 1.53

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 58 of 76
 Job No Sheet No Rev
59
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 108 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 108 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.2 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L4 L5 -------------|
| KL/R-Y= 122.28 | L4 FA = 141.22 |
| KL/R-Z= 71.30 + L4 L5 fa = 6.91 |
| UNL = 153.07 | L4 L5 FCZ = 155.34 |
| CB = 1.00 + L4 FTZ = 155.34 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 44.78 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 5.70 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.45 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.775E-01 4 |
| 1.87 T -0.02 0.19 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
108 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.378 4
190.98 T -1.65 19.02 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 59 of 76
 Job No Sheet No Rev
60
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 109 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 109 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 L5 STRESSES |
|IN KNS CMS | L5 L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 122.28 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 6.61 |
| UNL = 153.07 | FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 |L5 fbz = 16.34 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 8.70 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.44 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.241E-01 4 |
| 1.79 T 0.02 -0.07 1.53 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
109 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.224 4
182.75 T 2.51 -6.94 1.53

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 60 of 76
 Job No Sheet No Rev
61
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 109 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 109 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 122.28 | FA = 141.22 |
| KL/R-Z= 71.30 + fa = 6.61 |
| UNL = 153.07 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L5 fbz = 16.34 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 8.70 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.44 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.241E-01 4 |
| 1.79 T 0.02 -0.07 1.53 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
109 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.224 4
182.75 T 2.51 -6.94 1.53

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 61 of 76
 Job No Sheet No Rev
62
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 110 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 110 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 L5 L5 L5 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 122.28 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 6.42 |
| UNL = 153.07 | L5 FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L5 fbz = 12.54 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.24 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.17 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.572E-01 4 |
| 1.74 T 0.01 -0.05 1.53 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
110 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.157 4
177.47 T 0.94 -5.33 1.53

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 62 of 76
 Job No Sheet No Rev
63
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 110 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 110 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 122.28 | FA = 141.22 |
| KL/R-Z= 71.30 + fa = 6.42 |
| UNL = 153.07 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L5 fbz = 12.54 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.24 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.17 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.572E-01 4 |
| 1.74 T 0.01 -0.05 1.53 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
110 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.157 4
177.47 T 0.94 -5.33 1.53

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 63 of 76
 Job No Sheet No Rev
64
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 111 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 111 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER |L5 L5 L5 L5 STRESSES |
|IN KNS CMS | L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 122.28 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + fa = 6.42 |
| UNL = 153.07 | L5 FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 12.54 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 3.24 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.17 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.572E-01 4 |
| 1.74 T 0.01 -0.05 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
111 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.157 4
177.47 T 0.94 -5.33 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 64 of 76
 Job No Sheet No Rev
65
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 112 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 112 * | JAPANESE SECTIONS | AX = 2.71 |
| * | ST RHS60X30X1.6 | --Z AY = 1.49 |
|DESIGN CODE * | | AZ = 0.82 |
| AISC-1989 * =============================== SY = 2.83 |
| * SZ = 4.17 |
| * |<---LENGTH (M)= 1.53 --->| RY = 1.25 |
|************* RZ = 2.15 |
| |
| 0.1 (KNS-METRE) |
|PARAMETER |L5 L5 STRESSES |
|IN KNS CMS | L5 L5 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 122.28 | L5 FA = 141.22 |
| KL/R-Z= 71.30 + L5 fa = 6.61 |
| UNL = 153.07 | FCZ = 141.22 |
| CB = 1.00 + L5 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L5 FTY = 141.22 |
| FYLD = 23.54 | L5 fbz = 16.34 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 8.70 |
| DFF = 0.00 0.0 Fey = 70.60 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 207.65 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.44 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.241E-01 4 |
| 1.79 T 0.02 -0.07 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
112 ST RHS60X30X1.6 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.224 4
182.75 T 2.51 -6.94 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 65 of 76
 Job No Sheet No Rev
66
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 113 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 113 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 0.91 |
| UNL = 150.00 | L5 FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + L2 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 L5 L5 L2 fbz = 14.85 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.86 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 1.116E-01 5 |
| 0.80 T 0.00 0.42 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
113 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.112 5
82.00 T 0.00 42.39 0.00

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 66 of 76
 Job No Sheet No Rev
67
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 114 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 114 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.7 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 L5 -------------|
| KL/R-Y= 37.72 | L5 FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 2.16 |
| UNL = 150.00 | L5 L4 FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 L4 fbz = 21.47 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 22.40 |
| DFF = 0.00 0.1 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.71 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.259E-01 4 |
| 1.91 T -0.63 -0.60 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
114 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.326 4
194.70 T -63.97 -61.29 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 67 of 76
 Job No Sheet No Rev
68
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 115 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 115 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 1.2 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 37.72 | L4 FA = 127.36 |
| KL/R-Z= 37.72 +L4 L4 fa = 0.40 |
| UNL = 150.00 | L4 L4 FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 42.44 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.90 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 3.29 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 3.171E-01 5 |
| 0.36 C 0.05 -1.19 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
115 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.317 5
36.22 C 5.41 -121.17 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 68 of 76
 Job No Sheet No Rev
69
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 116 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 116 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L5 L4 L4 L4 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | L4 FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 0.73 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L4 L5 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L2 fbz = 20.08 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 17.84 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.25 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.737E-01 4 |
| 0.65 T 0.50 -0.56 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
116 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.274 4
65.79 T 50.93 -57.33 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 69 of 76
 Job No Sheet No Rev
70
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 117 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 117 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.4 (KNS-METRE) |
|PARAMETER | L5 L5 L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | L5 FA = 127.36 |
| KL/R-Z= 37.72 + L5 L4 fa = 0.50 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 |L2 L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 14.45 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.1 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 0.00 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 1.063E-01 5 |
| 0.44 C 0.00 -0.40 0.75 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
117 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.106 5
45.08 C 0.00 -41.27 0.75

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 70 of 76
 Job No Sheet No Rev
71
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 118 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 118 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | L5 L4 L4 L4 IN NEWTON MMS|
|--------------- + L5 -------------|
| KL/R-Y= 37.72 | L4 FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 0.73 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + L4 L5 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L2 fbz = 20.08 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 17.84 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.25 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.737E-01 4 |
| 0.65 T -0.50 -0.56 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
118 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.274 4
65.79 T -50.93 -57.33 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 71 of 76
 Job No Sheet No Rev
72
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 118 Check 2

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 118 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.6 (KNS-METRE) |
|PARAMETER |L4 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 37.72 | FA = 141.22 |
| KL/R-Z= 37.72 + fa = 0.73 |
| UNL = 150.00 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 20.08 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 17.84 |
| DFF = 0.00 0.6 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.25 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 2.737E-01 4 |
| 0.65 T -0.50 -0.56 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
118 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.274 4
65.79 T -50.93 -57.33 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 72 of 76
 Job No Sheet No Rev
73
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 119 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 119 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 1.2 (KNS-METRE) |
|PARAMETER | L4 STRESSES |
|IN KNS CMS | L4 IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 37.72 | L4 FA = 127.36 |
| KL/R-Z= 37.72 +L4 L4 fa = 0.40 |
| UNL = 150.00 | L4 L4 FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + L4 L4 FTY = 141.22 |
| FYLD = 23.54 | L4 fbz = 42.44 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 1.90 |
| DFF = 0.00 0.0 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 3.29 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 3.171E-01 5 |
| 0.36 C -0.05 -1.19 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
119 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.317 5
36.22 C -5.41 -121.17 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 73 of 76
 Job No Sheet No Rev
74
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 120 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 120 * | JAPANESE SECTIONS | AX = 8.85 |
| * | ST SHS100X100X2.3 | --Z AY = 3.91 |
|DESIGN CODE * | | AZ = 3.91 |
| AISC-1989 * =============================== SY = 28.00 |
| * SZ = 28.00 |
| * |<---LENGTH (M)= 1.50 --->| RY = 3.98 |
|************* RZ = 3.98 |
| |
| 0.7 (KNS-METRE) |
|PARAMETER |L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L5 L5 -------------|
| KL/R-Y= 37.72 | L5 FA = 141.22 |
| KL/R-Z= 37.72 + L5 fa = 2.16 |
| UNL = 150.00 | L5 L4 FCZ = 141.22 |
| CB = 1.00 + L4 FTZ = 141.22 |
| CMY = 0.85 | L5 FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 | L5 L4 fbz = 21.47 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 22.40 |
| DFF = 0.00 0.1 Fey = 742.01 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 742.01 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 1.71 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H2-1 3.259E-01 4 |
| 1.91 T 0.63 -0.60 1.50 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
120 ST SHS100X100X2.3 (JAPANESE SECTIONS)
PASS AISC- H2-1 0.326 4
194.70 T 63.97 -61.29 1.50

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 74 of 76
 Job No Sheet No Rev
75
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 125 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 125 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 0.7 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 181.04 | FA = 32.21 |
| KL/R-Z= 105.88 + fa = 1.09 |
| UNL = 306.15 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L2 fbz = 89.68 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.27 |
| DFF = 0.00 0.4 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 4.88 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 6.708E-01 5 |
| 0.40 C 0.00 0.69 3.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
125 ST RHS80X40X1.6 (JAPANESE SECTIONS)
PASS AISC- H1-3 0.671 5
40.71 C -0.14 70.19 3.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 75 of 76
 Job No Sheet No Rev
76
Part
Software licensed to
Job Title Ref

By Date26-Mar-24 Chd

Client File Membran R2.std Date/Time 28-Mar-2024 09:14

Steel Design (Track 2) Beam 126 Check 1

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ------------ |
|MEMBER 126 * | JAPANESE SECTIONS | AX = 3.67 |
| * | ST RHS80X40X1.6 | --Z AY = 2.02 |
|DESIGN CODE * | | AZ = 1.12 |
| AISC-1989 * =============================== SY = 5.25 |
| * SZ = 7.68 |
| * |<---LENGTH (M)= 3.06 --->| RY = 1.69 |
|************* RZ = 2.89 |
| |
| 1.1 (KNS-METRE) |
|PARAMETER | L5 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 181.04 | FA = 32.21 |
| KL/R-Z= 105.88 + fa = 3.15 |
| UNL = 306.15 | FCZ = 141.22 |
| CB = 1.00 + FTZ = 141.22 |
| CMY = 0.85 | FCY = 141.22 |
| CMZ = 0.85 + FTY = 141.22 |
| FYLD = 23.54 |L4 fbz = 142.58 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.12 |
| DFF = 0.00 0.7 Fey = 32.21 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 94.16 |
| (WITH LOAD NO.) FV = 94.14 |
| fv = 6.18 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| FAIL AISC- H1-3 1.108E+00 5 |
| 1.16 C 0.00 1.09 3.06 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
* 126 ST RHS80X40X1.6 (JAPANESE SECTIONS)
FAIL AISC- H1-3 1.108 5
117.93 C 0.06 111.59 3.06

Print Time/Date: 28/03/2024 09:15 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 76 of 76