EPCCOM FOR GAS PROCESSING PLANT

DETAIL DESIGN HFY-3800-0000

0000-VED-197-STR-DWG-0021 REV.: B PAGE 1 OF 19

HFY--CON/F&C0940-0964
VENDOR NAME: KWIK STEEL
PO NO: IQP-3020-ST-197
PO TITLE: SUPPLY OF STEEL STRUCTURE & PIPE RACK

Erection GA Drawings of Miscellaneous Steel

Structures - SRU

A. halim Doka 14.8.2023

B RE-ISSUED FOR APPROVAL 15-July-2023 Dilip Kumar Arun Parthiban RT sankar

A ISSUED FOR APPROVAL 08-May-2023 Dilip Kumar Arun Parthiban RT sankar

REV. DESCRIPTION DATE PREP’D CHK’D REV’D APP’D

 EPCCOM FOR GAS PROCESSING PLANT

DETAIL DESIGN HFY-3800-0000-VED-197-STR-DWG-0021 REV.: B PAGE 2 OF 19

HFY-CON/F&C0940-0964
VENDOR NAME: KWIK STEEL
PO NO: IQP-3020-ST-197
PO TITLE: SUPPLY OF STEEL STRUCTURE & PIPE RACK

Erection GA Drawings of Miscellaneous Steel

Structures - SRU

18.07.2023

B RE-ISSUED FOR APPROVAL 15-July-2023 Dilip Kumar Arun Parthiban RT sankar

A ISSUED FOR APPROVAL 08-May-2023 Dilip Kumar Arun Parthiban RT sankar

REV. DESCRIPTION DATE PREP’D CHK’D REV’D APP’D

 Erection GA Drawings of Miscellaneous
EPCCOM FOR GAS PROCESSING PLANT
Steel Structures - SRU

DETAIL DESIGN HFY-3800-0000-VED-197-STR-DWG-0021 REV.: B PAGE 3 OF 19

REVISION DESCRIPTION SHEET

Rev. Page Para. Reason for Revision
B All - Re-Issued for Approval

Hold No. Page Para. Reason for Hold

DATE
BY
DISCIPLINE
DATE
BY
DISCIPLINE
DATE
BY
BYBY
DISCIPLINE
DATE
DISCIPLINE
DATE
BY
DISCIPLINE
DATE
DISCIPLINE
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

3D VIEW_MISC-STRU-1401

CLIENT:

CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. 3D VIEW
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 1/16 B
STR-DWG-0021

A0
DATE
BY
DISCIPLINE
DATE
BY

A.8.1 A.8.2 B.8.1 D.8.1 E.8.1 F.8

DISCIPLINE

12240

1960 800 3940 3000 2540

DATE

EL.+3.250
(T.O.S)
BY
DISCIPLINE
DATE

MISC1401-CL16

MISC1401-CL17

MISC1401-CL17

MISC1401-CL17

MISC1401-CL17

MISC1401-CL16
2700

HEB160

HEB160

HEB160

HEB160

HEB160

HEB160
BY
DISCIPLINE

EL.+0.550
DATE

BOTTOM OF BASE PLATE

BY

ELEVATION ALONG GRID - "3.8"

BYDISCIPLINE
DATE
DISCIPLINE
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

CLIENT:

CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL 91401_V26_V28_V31_V32
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. ELEVATION ALONG GRID "3.8"
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 10/16 B
STR-DWG-0021

A0
DATE
BY
DISCIPLINE
DATE
BY
DISCIPLINE
DATE
BY
DISCIPLINE

A.SR31 B.SR31 A.SR31 B.SR31

1.SR31 2.SR31 1.SR31 2.SR31
DATE

2140 150 1000 150

2140 150 1000 150

EL.+4.500 EL.+4.500 HEB260 EL.+4.500

EL.+4.500
BY

MISC1401-FR1 HEB260 HEB260

T.O.S HEB260 T.O.S T.O.S
T.O.S
DISCIPLINE
DATE
BY
DISCIPLINE

4000

4000

4000

4000
DATE

MISC1401-CL1

MISC1401-CL2

MISC1401-CL1

MISC1401-CL2
MISC1401-CL2

MISC1401-CL2
MISC1401-CL1

MISC1401-CL1

HEB260

HEB260

HEB260

HEB260
HEB260

HEB260
HEB260

HEB260
BY
DISCIPLINE

EL.+0.500 EL.+0.500 EL.+0.500

BOTTOM OF BASE PLATE EL.+0.500
BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE

ELEVATION ALONG GRID "B.SR31"

ELEVATION ALONG GRID "A.SR31" ELEVATION ALONG GRID "1.SR31" ELEVATION ALONG GRID "2.SR31"
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

CLIENT:

CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL SILENCER BLOWER SUPPORT
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. ELEVATION ALONG GRIDS "A.SR31" , "B.SR31" ,"1.SR31" & "2.SR31"
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 12/16 B
STR-DWG-0021

A0
DATE
BY

A.8 B.8 C.8 D.8 E.8 F.8

DISCIPLINE

13000

2900 2900 1400 2800 3000

134 126
DATE

HEB100 1299 1601 1705 1195 601 799 295

EL.+5.221
EL.+4.400 EL.+4.416 EL.+4.387 (T.O.S)
258
T.O.S
T.O.S T.O.S EL.+4.842
BY

MISC1401-SF39
(T.O.S)
L75*8

MISC1401-SF20
DISCIPLINE

826
HEB100
L75*8

MISC1401-SF23
L75*8

447
MISC1401-SF24
HEB100

1166
EL.+4.395

1150

1137
EL.+4.395

HEB100
L75*8
(T.O.S)
(T.O.S)

HEB100
MISC1401-SF49
L75*8
DATE

EL.+3.250 MISC1401-B15 MISC1401-B16 MISC1401-B18

1224
MISC1401-B19 SECTION BH - BH SECTION BJ - BJ
(T.O.S) HEB160 HEB160 HEB160 HEB160
BY

460
652
745
UNP160

820
MISC1401-B17

929
HEB160
DISCIPLINE

MISC1401-SF11
L75*8 476 86 D.8
624
287
1322 907 MISC1401-SF25 MISC1401-SF21 UNP160
MISC1401-SF22 911 UNP160 UNP160
L75*8
DATE

2700

877
BY

MISC1401-CL4

MISC1401-CL5

MISC1401-CL6

MISC1401-CL7

MISC1401-CL8

MISC1401-CL9
DISCIPLINE

MISC1401-CL13
HEB160
HEB160

HEB160

HEB160

HEB160

HEB160

HEB160
10

2.8

32
EL.+0.550
DATE

MISC1401-SF19
BOTTOM OF BASE PLATE UNP160

SECTION BJ1 - BJ1

BY

ELEVATION ALONG GRID - "1.8"

DISCIPLINE

A.8 B.8 C.8 D.8 E.8 F.8

DATE

13000

2900 2900 1400 2800 3000

BY

578
EL.+5.796 250 250
DISCIPLINE

T.O.S SPS-IC-0376E

1812 1188
BH BJ
HEB160
1299 1601

9 L75*8
166 166

MISC1401-PS3
L75*8
300
2546

HEB160
172 128 613 962 1225 279 679
8
L75*8 EL.+4.395 3 EL.+4.335 19
T.O.S
L75*8 T.O.S

2100
L75*8
HEB100
989 1163
249 251

MISC1401-SF38
MISC1401-SF41
1590

1592

MISC1401-PS1
MISC1401-SF42

UNP160
BJ

MISC1401-SF35
MISC1401-SF43

1210

1195
1151

HEB140
MISC1401-SF40 MISC1401-SF31

1085

L75*8
159 174
HEB100

EL.+3.613 UNP160
MISC1401-PS2
UNP160
854

854

854
T.O.S

HEB100
MISC1401-SF34 UNP160
L75*8

UNP160 UNP160
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

BH 850
363

MISC1401-SF45
EL.+3.250 UNP160
MISC1401-B48 MISC1401-B2
T.O.S HEB160 HEB160
1730
450

364
230 1500

460
537
EL.+2.800 MISC1401-B1 MISC1401-B14
L75*8 UNP160
778

MISC1401-FR3 MISC1401-B47
80

T.O.S HEB160 HEB160 HEB160 HEB160

L50*6
MISC1401-SF18 369
EL.+2.472 850
MISC1401-SF37
UNP160 L75*8
(T.O.S) 788
600 380 90
UNP160

MISC1401-CL13
670
920

HEB160
61

MISC1401-SF36
UNP160
100 HEB160 MISC1401-SF19
UNP160
2700

SPS-IC-0328E
MISC1401-CL10

MISC1401-CL11

MISC1401-CL12

MISC1401-CL14

MISC1401-CL15
2250
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

BJ1 BJ1
HEB160

HEB160

HEB160

HEB160

HEB160
666
297

580
EL.+0.950
UNP160 (T.O.S)

L75*8
537

400
EL.+0.550
BOTTOM OF BASE PLATE
CLIENT:

ELEVATION ALONG GRID - "2.8" CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL 91401_V26_V28_V31_V32
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. ELEVATION ALONG GRIDS "1.8" & "2.8"
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 9/16 B
STR-DWG-0021

A0
DATE

1.8 2.8 1.8 2.8

2100 2100 550
BY

245 55 126 195

150 EL.+4.714
1.8 2.8
DISCIPLINE

MISC1401-SF28 (T.O.S)
L75*8
2100
L75*8 L75*8
L75*8
90 EL.+4.401
436 437 117 30 (T.O.S)
L75*8

20
MISC1401-SF39
SPS-IC-0095E
1.8 2.8

1592
355 UNP160

1464
DATE

HEB100
306 114

MISC1401-SF27

MISC1401-PS2

1151
UNP160

1085
EL.+3.619

1096
1.8 2.8 MISC1401-SF43
L75*8 (T.O.S)
395 90
MISC1401-SF46 2100

UNP160
724
UNP100
2100 UNP160
EL.+3.250 EL.+3.250 EL.+3.250

473
UNP160
EL.+3.250

369
EL.+3.250
BY

MISC1401-B29 T.O.S MISC1401-B30 MISC1401-B32 MISC1401-B34

(T.O.S) (T.O.S) HEB160 HEB160 (T.O.S) (T.O.S) HEB160
HEB160
DISCIPLINE

MISC1401-B28 MISC1401-SF34
HEB160 UNP160
MISC1401-SF26
L75*8

MISC1401-CL10
491 EL.+2.244
MISC1401-CL4

MISC1401-CL14
(T.O.S)
DATE

HEB160
HEB160

MISC1401-CL11

MISC1401-CL13

HEB160
MISC1401-CL5

MISC1401-CL7

MISC1401-CL8
2700
2700

2700

2700
2700

HEB160

HEB160

HEB160
HEB160

HEB160
MISC1401-CL12
BY

MISC1401-CL6
MISC1401-SF50
L75*8 EL.+1.279

1694
(T.O.S)

HEB160

HEB160
DISCIPLINE

EL.+0.770
(T.O.S) 500

729
523

EL.+0.550 EL.+0.550 EL.+0.550 EL.+0.550

EL.+0.550 BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE
BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE
DATE

UNP160

ELEVATION ALONG GRID "C.8" ELEVATION ALONG GRID "D.8" ELEVATION ALONG GRID "E.8"
ELEVATION ALONG GRID "B.8"
ELEVATION ALONG GRID "A.8"
BY
DISCIPLINE
DATE

1.8 2.8 3.8 2.8 3.8 2.8 3.8

BY

4480
3.8 2380 2380 3.8
2100 2380
DISCIPLINE

400 400 400 400

EL.+3.250 400 400 330 400 480
EL.+3.250
400 400
EL.+3.250 EL.+3.250
MISC1401-B36 MISC1401-B46 EL.+3.250 MISC1401-B20 MISC1401-B45 (T.O.S)
(T.O.S) HEB160 HEB160 (T.O.S) (T.O.S) HEB160 (T.O.S) HEB160

UNP80
HEB160 HEB160
HEB160
DATE

HEB160
HEB160
6
604

MISC1401-CL17
BY

MISC1401-CL17
MISC1401-CL16

2700
MISC1401-CL17
MISC1401-CL16

2700
2700
2700

2700
MISC1401-CL15

HEB160

HEB160
DISCIPLINE

2396
MISC1401-CL9

HEB160

HEB160
HEB160
HEB160
HEB160

EL.+0.550 EL.+0.550 EL.+0.550 EL.+0.550 EL.+0.550

BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE
BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE

ELEVATION ALONG GRID "D 8.1"

ELEVATION ALONG GRID "A 8.1" ELEVATION ALONG GRID "A 8.2"
ELEVATION ALONG GRID "F.8" ELEVATION ALONG GRID "B 8.1"
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

3.8
400 400
EL.+3.250
(T.O.S)

HEB160
MISC1401-CL17
2700
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

HEB160

EL.+0.550
BOTTOM OF BASE PLATE

CLIENT:

ELEVATION ALONG GRID "E 8.1"

CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL 91401_V26_V28_V31_V32
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. ELEVATION ALONG GRIDS "A.8" TO "F.8" & "A/B/D/E 8.1", "A8.2"
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 8/16 B
STR-DWG-0021

A0
DATE
BY
DISCIPLINE
DATE

VB VA
BY

4000
DISCIPLINE

1300 2700

EL.+4.365 MISC1401-B5
T.O.S HEB160
DATE

V1

MISC1401-SC1
1095
875

HEB160
BY

EL.+3.410 170 775 100

T.O.S
EL.+3.270 170
MISC1401-B13
DISCIPLINE

T.O.S HEB160

660
MISC1401-B11 HEB100
HEB160
EL.+2.750
CL
DATE

HEB100

3865
HEB100
BY

2760

MISC1401-SF14

2770
DISCIPLINE

HEB160
2100

MISC1401-SF15

MISC1401-SF16
HEB160

HEB160
DATE

EL.+0.650
BY

BOTTOM OF BASE PLATE

EL.+0.500
BOTTOM OF BASE PLATE
DISCIPLINE

ELEVATION ALONG GRID "VA.1"

DATE

ELEVATION ALONG GRID "V2"

BY
DISCIPLINE
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

CLIENT:

CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL SUPPORT CABLE TRAYS
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. ELEVATION ALONG GRIDS "V2" & VA.1
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 11/16 B
STR-DWG-0021

A0
DATE
BY

SPS-ICA-0483 SPS-ICA-0483
DISCIPLINE

2100

136 119 970 796 79 111

MISC1401-HR6
DATE

MISC1401-HR6 CHS42.4*3.6
CHS42.4*3.6

SPS-ICA-0478

136
BY

391
MISC1401-HR4
DISCIPLINE

CL OF SPLICE
CHS42.4*3.6

CHS42.4*3.6
312
845
L50*6
DATE

MISC1401-HR7

565
261

CHS42.4*3.6

458
397
BY

SPS-ICA-0483
1745
DISCIPLINE

216
295

159

TOE PLATE
DATE

200 200
MISC1401-HR5

TOC 1 - 18 Ø HOLE
CHS42.4*3.6

30
639
515
BY

16Ø ANCHOR
DISCIPLINE

FASTNER
202

155
MISC1401-HR5
CHS42.4*3.6

MISC1401-HR7
TYPICAL HANDRAIL CONCRETE CONNECTION DETAIL
DATE

CHS42.4*3.6

111 185 479 772 775

2100
BY
DISCIPLINE

HANDRAIL PLAN AT EL. +1.100 TOS

DATE

MISC1401-HR47
CHS42.4*3.6
CL OF SPLICE CL OF SPLICE CL OF SPLICE CL OF SPLICE CL OF SPLICE CL OF SPLICE CL OF SPLICE
861 1978 5073 2027 5973 1977 1729
BY

MISC1401-HR36 MISC1401-HR52
CHS42.4*3.6 179 604 390 1762 415 1265 1878 1265 465 1812 415 1327 1327 1327 1327 465 1762 465 1265 465 997 997 997 797 639 321 179 CHS42.4*3.6
25
DISCIPLINE

MISC1401-HR41 MISC1401-HR45 MISC1401-HR48 MISC1401-HR50

CL OF SPLICE
CHS42.4*3.6 CHS42.4*3.6 CHS42.4*3.6 CHS42.4*3.6

228
CL OF SPLICE

325
535
332

MISC1401-HR42
MISC1401-HR42 MISC1401-HR44

440
CHS42.4*3.6
CHS42.4*3.6 CHS42.4*3.6
380

1208
MISC1401-HR37
CHS42.4*3.6 MISC1401-HR39

MISC1401-HR23
CHS42.4*3.6

CHS42.4*3.6

1009
1189

MISC1401-HR49 MISC1401-HR53
MISC1401-HR49 MISC1401-HR53 L50*6
L50*6 L50*6 MISC1401-HR53
L50*6 MISC1401-HR49 L50*6
L50*6

1009
1081 1537 5513 1537 6463 1537

113
1339

879
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

163

6087
MISC1401-HR40
MISC1401-HR3

CHS42.4*3.6
CHS42.4*3.6

593
1339

586
334
765

MISC1401-HR43
CHS42.4*3.6

558
225
639

MISC1401-HR1

97
CHS42.4*3.6

CL OF SPLICE
630
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

MISC1401-HR20 MISC1401-HR46
121 CHS42.4*3.6
319 44
CHS42.4*3.6
143 275 216
204

269
350

162 165

36
325
151

MISC1401-HR38 MISC1401-HR2 MISC1401-HR19 MISC1401-HR21 MISC1401-HR51

CHS42.4*3.6 CHS42.4*3.6 CHS42.4*3.6 CHS42.4*3.6 CHS42.4*3.6

325 425 1239 1289 686 1379 614 514 653 573 751 1174 1174 830 515 490 709 1289 1289 889 495 570 500 597 580 677 427 1050 1327 465 1485 125

229 5682 5673 5182 6173

CL OF SPLICE CL OF SPLICE CL OF SPLICE CLIENT:

CL OF SPLICE

HANDRAIL PLAN AT EL. +0.600 TOG

STAIRS STEEL STRUCTURES TO PIT-V20
CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL PIPING SUPPORTS
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. HANDRAIL PLAN AT EL. +1.100 TOS
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 16/16 B
STR-DWG-0021

A0
DATE

1.8 2.8 3.8

BY

4480
DISCIPLINE

2100 2380

C
L OF SPLICE
38
111 155 959 639 458
366 291 366
DATE

111

111
MISC1401-
HR11

F.8 F.8

CL OF SPLICE

355
405

405
111
294
MISC1401-
BY

HR13

625

539
DISCIPLINE

1250
1370

200

600

2540
DATE

1139

MISC1401-
3000

154

HR24
BY
DISCIPLINE

1250
1415
1130

839
CL OF SPLICE
E.8.1

378
DATE

5003

338
E.8

MISC1401-
BY

490
1250

1250
MISC1401-

1160
191 59

HR35
HR30
DISCIPLINE

511

CL OF SPLICE
MISC1401-

739

3000
HR30
CL OF SPLICE

590
623
2800
DATE

303
MISC1401-
1253

1253
HR9

CL OF SPLICE

443
BY

MISC1401-
CL OF SPLICE

HR29
MISC1401-
HR14
DISCIPLINE

340

1519
308
363
D.8.1

247
396

615

732
MISC1401-
D.8 HR27

300
598

831
DATE

CL OF SPLICE

12240
192
581

C
L OF SPLICE
1044
13000

1400

966
MISC1401-
BY

HR22

1171

5096
DISCIPLINE

MISC1401-
251

1452
L OF SPLICE

623

HR16

300
C.8 CHS42.4*3.6

1884
CHS42.4*3.6
229
1100

3940
219

MISC1401-
869
679

HR26
TYP
CL OF SPLICE 4
233

37.5
194

37.5
1485
MISC1401-

MISC1401-
600
844

MISC1401-

HR28

HR34
2900

37.5
1139
398

HR15

CL OF SPLICE
500

2-14X30 LG SLOTTED
122 HOLES IN PLATE AND
122

14Ø HOLES IN RAIL FOR M12 BOLT 37.5

233

35
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

661
MISC1401-

B.8.1
240 600 600 317

80
1494

HR8

844

800
CL OF SPLICE
844
B.8 260 580 600 317
MISC1401- A.8.2
HR31
CL OF SPLICE
750

1519
CL OF SPLICE

260

501

HANDRAIL SPLICE DETAIL

565

370
MISC1401-

CL OF SPLICE
700

MISC1401-
HR17

350

HR25
500

608
1960
138

C
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

L OF SPLICE
CL OF SPLICE
2900

MISC1401-
722
557
497

C
HR33

971

L OF SPLICE
894

623
146

279

A.8.1
837
797

1199

111

MISC1401-
HR18 342 639 291
MISC1401-
HR10 MISC1401- CLIENT:
HR32 511
255
249

A.8
111

111 MISC1401-
HR12 111 CONTRACTOR:

149 671 1074 318

713

C
L OF SPLICE

HANDRAIL PLAN AT EL. +3.250 TOS

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL 91401_V26_V28_V31_V32
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. HANDRAIL PLAN AT EL. +3.250 TOS
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 15/16 B
STR-DWG-0021

A0
DATE

SPS-ICA-0483 SPS-ICA-0483 350

SPS-ICA-0484 SPS-ICA-0479 SPS-ICA-0476
SPS-ICA-0476 SPS-ICA-0070
2100 400 50 125 125 50

2904 690 2100 400 1345

50
6 - 20 Ø HOLES
BY

1050 1050 HEB160

50
125
AM
DISCIPLINE

350
E 353.198 AL

125
MISC1401-SF10

EL. +1.047 (TOS)

N 178.017 SPS-ICA-0479 AW AW

50
HEB160
AP SPS-ICA-0070
MISC1401-SF4 DET- 7 MISC1401-SF5 SPS-ICA-0476

910
HEB160 MISC1401-SF12 UNP160 2 - 30 Ø HOLES
HEB160

HEB160
CL OF RUNG

104
TYP HEB160

50
EL. +0.980 (TOS)

53
682 15 15

17
BASEPLATE

625
350 X 350 X 15
DATE

MISC1401-B8 482 200 DETAIL- 7

AR AR HEB160 (REQ QTY: 9 NOS)
MISC1401-SF32
AM UNP140
SPS-ICA-0484 SPS-ICA-0476

840
845

806
AN
BY

SPS-ICA-0478

230
MISC1401-SF10

630
MISC1401-SF7 HEB160
HEB160 OF LADDER
CL
FROM EL.+0.550
DISCIPLINE

SPS-ICA-0478

MISC1401-B9

230
HEB160

845
80

305
327 154 PLATE
AQ AQ MISC1401-B4 AU AU 200 X 80 X 10

HEB160
HEB160
HEB160 SPS-ICA-0484
SPS-ICA-0483 AP

171
845
AL SPS-ICA-0483 AS UNP140

200
MISC1401-LD3

1000
MISC1401-SF6 MISC1401-SF9 UNP100 EL.+0.500
DATE

HEB160 HEB160
SPS-ICA-0483 BOTTOM OF BASE PLATE

695
SPS-ICA-0483
SECTION AW - AW

MISC1401-B7
BY

IPE160
900
AN AS

MISC1401-B3
AV
DISCIPLINE

1180
200

HEB160
300 259
MISC1401-B6

CL OF RUNGS
MISC1401-LD1 HEB160
UNP140

883
FLT10*65

325
1083
AT AT

280
DATE

630
MISC1401-SF30
UNP140
845 CL OF RUNG
UNP140
1050 1050

305
CL OF RUNG
700
240 240

TO EL.+1.130 (TOG)
MISC1401-LD1 9

LADDER FROM
UNP140
52

200
200 500
BY

FLT10*65

TO EL.+1.130 (TOG)
EL.+3.457

EL.+0.500
300

LADDER FROM
(T.O.S)
DISCIPLINE

20

== 230 230

EL.+0.500
MISC1401-LD2 6
UNP100
850 155

CL
HEB160
OF LADDER
CL
FROM EL.+0.550 400

CL
EL.+2.841 HEB160 PLAN AT EL. +0.500 BOTTOM OF BASE PLATE ==
SECTION AU3 - AU3
PLAN AT EL. +1.100 TOS
DATE

(T.O.S) AV
EL.+3.738 300
(T.O.S) ==
400
SPS-ICA-0478 ==
300
2500 EL.+3.521
BY

EL.+3.652 ==

20
EL.+3.457 (T.O.S)
(T.O.S) HEB160
MISC1401-SF7
MISC1401-SF6

(T.O.S) SPS-ICA-0070
DISCIPLINE

2957
1741

HEB160
HEB160

HEB160
90 750

1300
207 301
SPS-ICA-0478 SPS-ICA-0076
900 845

1062
DATE

625 EL.+1.100 MISC1401-B9

UNP160

UNP160
T.O.S

300
MISC1401-B3 MISC1401-B4 HEB160
EL.+1.100 150 135
HEB160 HEB160
420 EL.+2.568
(T.O.S) (T.O.S)
EL.+2.438 75 150
20

2421

20
600
BY

2357
EL.+2.590 850 (T.O.S)
EL.+0.500 MISC1401-SF9 T.O.S
600

WELDED FRAME
HEB160
480

BOTTOM OF BASE PLATE HEB160

EL.+0.500
DISCIPLINE

2957

MISC1401-SF10
MISC1401-SF7
UNP160 UNP100
BOTTOM OF BASE PLATE

3238
HEB160
UNP160

HEB160

MISC1401-SF4

WELDED FRAME
980
SECTION AS - AS

781
HEB160

3152
SECTION AN - AN 325 200 320

WELDED FRAME
MISC1401-SF5
EL.+1.100 EL.+1.809

MISC1401-SF12
20
MISC1401-B8
T.O.S HEB160 T.O.S

2068
HEB160
1938

HEB160
600

HEB160
EL.+0.500 37
BOTTOM OF BASE PLATE L75*8

944
HEB160

750
SECTION AQ - AQ 500

430
200 550 EL.+0.940 45 150

20
200 320
AV1 AV1 T.O.S

20
EL.+3.521 300
EL.+0.500
== EL.+0.500
20

(T.O.S)
BOTTOM OF BASE PLATE
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

BOTTOM OF BASE PLATE

271

440
UNP160

365
EL.+0.500 HEB140
SECTION AR - AR
BOTTOM OF BASE PLATE
SECTION AM - AM
HEB160 PIPING SUPPORT PIPING SUPPORT

300
SPS-ICA-0479 SPS-ICA-0070
(LOOKING WEST) (LOOKING NORTH)
SECTION AL - AL
1200
987

PIPING SUPPORT
200

300
SPS-ICA-0484 200

1570
(LOOKING WEST)
344 769

330 221 MISC1401-SF30 MISC1401-SF33

EL.+2.531 UNP140 UNP140

CL LADDER
25 150

325
325
285 95

170
60 159 CL OF LADDER AU1 AU1 95 285
20

20

(T.O.S)

630
250
CL LADDER
MISC1401-LD1 10 772 10

650
UNP140
UNP160 FLT10*65

305
45°
45°

870
AT1 AT1
541

UNP160
33

559
UNP160
WELDED FRAME

AV2 AV2

45°

45°
UNP140
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

EL.+1.990

460

460
200 400

211
3175
20

(T.O.S)
3021

45°

45°
AU2 AU2 HEB300
45°
45°
MISC1401-SF30
UNP140 6
7*300=2100

191 HEB300
HEB160 6

R3
1121

1068

0
MISC1401-SF10

380

7*300=2100

80
R 38
MISC1401-LD2

MISC1401-SF33
SECTION AU2 - AU2
2034

943

UNP140
1200

2500
1975
HEB160

HEB160
SECTION AV2 - AV2
UNP100

SECTION AV1 - AV1 SECTION AU1 - AU1

MISC1401-LD3
1721

2200

2125
1490

1200 CLIENT:
EL.+1.100

UNP100
200 400 (T.O.S)
20

75 772
AV2 AV2 MISC1401-SF32
34
300

UNP140

74
CONTRACTOR:
MISC1401-SG2
600

HEB160 AU3 AU3

547

150 170

MISC1401-SF30
430

EL.+0.500 EL.+0.500 UNP140 STOP PIN

130

EL.+0.550

220
55
BOTTOM OF BASE PLATE (T.O.GROUT) MISC1401-SG2 SLEEVE
430
100

BASEMENT C10
AT2 AT2
MOUNTING PLATE
130

910

25
EL.+0.300 EL.+0.550
250

SECTION AT - AT 30 25
100

VENDOR:
(FGL) BASEMENT C10 SECTION AT1 - AT1
SECTION AP - AP
SECTION AU - AU SECTION AT2 - AT2
SECTION AV - AV
NOTES: HOLDS: PROJECT TITLE:
DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL PIPING SUPPORTS
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. PLAN AT EL. +0.500 (BOBP) & EL. +1.100 (TOS)
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 6/16 B
STR-DWG-0021

A0
DATE
BY
DISCIPLINE

V1 V2
V1 V2
2080
DATE

HEA160
2080
VA
BY

V1 V2
X X
VA 2080
DISCIPLINE

MISC1401-SF16 DET- 3
HEB160 VA

MISC1401-SF16

2130
HEB160
DATE

2130

91401-PIT-V-20
130

MISC1401-B12

MISC1401-B5
2130
BY

1000
EL.+0.650 (BOBP)

HEB160
UNP160
MISC1401-SF14
DISCIPLINE

HEB160 HEB100
MISC1401-B11
4000

1015

4000

4000
HEB160
EL. +3.410 (TOS)
MISC1401-SF14
VA.1 HEB160 VA.1
DET- 4
100
VA.1 170
DATE

EL. +3.250 (TOS)

HEA160

1120
985
1870

HEB100
Y Y

500
BY

1870
1870
W
DISCIPLINE

EL. +3.270 (TOS)

MISC1401-SF15

1300
MISC1401-B13
HEB160
775

HEB160
MISC1401-SF15
VB HEB160

DET- 3
DATE

VB
VB

170
450
BY

PLAN AT EL. +2.750 TOS

PLAN AT EL. +0.500 BOTTOM OF BASE PLATE PLAN AT EL. +4.365 TOS
DISCIPLINE
DATE

VA.1
V2
BY

V2 450
MISC1401-B11 450
EL.+3.410 HEB160
(T.O.S)
EL.+4.365 MISC1401-B12 EL.+4.365
DISCIPLINE

HEA160
UNP160 (T.O.S)
(T.O.S)
610

985 1015
GRID
EL.+2.550 GRID
250

(T.O.S) HEB100 HEA160 MISC1401-B12

360 200
UNP160 GRID
HEB100 50 260 50 50 100 50
500
15 15

HEB160
MISC1401-SC1

50
50
4 - 20 Ø HOLES 4 - 20 Ø HOLES
80
PLATE
2 - 30 Ø HOLES GRID

HEB160
200 X 80 X 10
MISC1401-SF16

2 - 30 Ø HOLES

30
30
1900

GRID
GRID
MISC1401-SF14

200
360
260
360

260

HEB160
EL.+0.500
HEB160

30
30
BOTTOM OF BASE PLATE
EL.+0.650
HEB160

HEB160
HEB160 BOTTOM OF BASE PLATE
BASEPLATE
AA AA AB AB

50
50
200 X 360 X 20
15 15
SHEAR KEY
EL.+0.650 BASEPLATE
BOTTOM OF BASE PLATE 360 X 360 X 20 100
DETAIL- 3
Y - Y DETAIL- 4 SECTION AB - AB
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

SECTION AA - AA
W - W
X - X
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

CLIENT:

CONTRACTOR:

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL SUPPORT CABLE TRAYS
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. PLAN AT EL. +0.500 (BOBP) & EL. +2.750 TOS
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 4/16 B
STR-DWG-0021

A0
DATE

SPS-ICA-0028
BY

1600
E-08-1
600 1000
DISCIPLINE

MISC1401-SF3
HEB120

AK
E-08-C

AC AC
SPS-ICA-0699
DATE

500
MISC1401-SF1
HEB160 SPS-ICA-0354 HEB160
HEB160

1970
SPS-ICA-0699
BY

MISC1401-SF2 MISC1401-SF3
HEB160 HEB120
DISCIPLINE

WELDED FRAME
91401_V_01
SPS-ICA-1788 SPS-ICA-1789
SPS-ICA-0354 E-08-B

2000
DET- 6

4630
AC AC AJ2 MISC1401-SF17
AJ3

MISC1401-FR2
MISC1401-SF8 HEB200 MISC1401-SF48
HEB160 HEB200 HEB160
DATE

1500

HEB260
SPS-ICA-1788 SPS-ICA-1789 91401_V_01

2660
AJ3
BY

HEB160
AJ2 AJ AJ
HEB260
DISCIPLINE

MISC1401-SF3
HEB120 PLAN AT EL. +0.350 BOTTOM OF BASE PLATE PLAN AT EL. +0.500 BOTTOM OF BASE PLATE PLAN AT EL. +0.500 BOTTOM OF BASE PLATE
SPS-ICA-0028

E-08-A
DATE

AC AC AK
DET- 5
TYP
PLAN AT EL. +4.187 TOS
BY

91401_V_01 PIPING SUPPORT

SPS-ICA-0028
PLAN AT EL. +0.500 BOTTOM OF BASE PLATE
DISCIPLINE

GRID GRID
GRID
320 510 GRID
500 GRID
40 120 120 40 BASEPLATE
GRID GRID
DATE

BASEPLATE
510 X 510 X 20 65 190 190 65 360
320 320 500 X 500 X 15 75 175 175 75 250
50 50 BASEPLATE
MISC1401-SF1 GRID

65
45
HEB160 45 115 115 45 45 230 45 8 - 20 Ø HOLES 250 X 250 X 10 50 150 50 8 - 20 Ø HOLES 50 130 130 50
8 - 24 Ø HOLES BASEPLATE HEB200
HEB260 360 X 360 X 20

75
40

15 15
40

50
115
8 - 20 Ø HOLES 2 - 30 Ø HOLES HEB200 4 - 14 Ø HOLES
BY

15

50
4 - 20 Ø HOLES

190
320
GRID PLATE

175
50

50
120

HEB120 200 X 80 X 10 80
120

15
115
15

15
2 - 30 Ø HOLES

GRID
GRID

GRID
GRID

250
150
GRID

510
320
DISCIPLINE

500
320

30
15

GRID
120

15
AE1 AE1
120

360

260
175

190
50

50

45
HEB160 AH1 AH1

200
30
BASEPLATE AG AG

50
2 - 30 Ø HOLES
AD AD HEB160 320 X 320 X 15 2 - 30 Ø HOLES
EL.+0.500
40

40

75
15 15 HEB200
15 15 BOTTOM OF BASE PLATE
BASEPLATE 2 - 30 Ø HOLES AF AF AH AH

65

50
320 X 320 X 15
50 50
DATE

PIPING SUPPORT 50 50 DETAIL 5

PIPING SUPPORT
SPS-ICA-0699 AE AE SPS-ICA-1788
PIPING SUPPORT DETAIL 6 SECTION AH1 - AH1
PIPING SUPPORT PIPING SUPPORT
SPS-ICA-1789 SPS-ICA-0028
SPS-ICA-0354
BY

GRID
DISCIPLINE

GRID
GRID
GRID
GRID GRID
HEB160 PLATE
HEB200 150 300 X 150 X 15 HEB260
HEB160 80 PLATE
HEB160
200 X 80 X 10
PLATE
200 X 80 X 10
120 PLATE
250 X 120 X 15 BS
AJ1
80 PLATE
80
200 X 80 X 10 HEB120 60 PLATE
150 X 60 X 10 91401_V_01
91401_V_01

300
200

EL.+0.500 EL.+5.000 525 EL.+5.000

250
200
200

100
EL.+0.500

150
EL.+0.500 BOTTOM OF BASE PLATE EL.+0.350 EL.+0.500 EL.+0.500
(T.O.S)
(T.O.S)
BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE
BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE

SECTION AG - AG

898
SECTION AE - AE SECTION AF - AF
SECTION AD - AD SECTION AE1 - AE1 450
SECTION AH - AH

1400
525
L75*8
200

250
SPS-ICA-1789 SPS-ICA-0028
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

1200 2000

EL.+4.370 300 900 1500 500

(T.O.S) EL.+4.187

4500
(T.O.S) MISC1401-FR2
HEB260

HEB200

3601
AJ2 SPS-ICA-1788

MISC1401-SF48
SPS-ICA-0354

3000
600
SPS-ICA-0699

1
BR
550

MISC1401-SF48
HEB200
200 400

60 01
550 SPS-ICA-0354
EL.+3.078

P1 14
EL.+3.026

N C

1525
275 275

U IS
200 (T.O.S)

M
EL.+3.025

100
10

(T.O.S)
EL.+3.025

HEB200
(T.O.S) E-08-1
(T.O.S)
100
500 HEB160
HEB160
EL.+2.533 EL.+0.500
67

HEB160
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

(T.O.S) BOTTOM OF BASE PLATE EL.+0.500

3870
BOTTOM OF BASE PLATE

3687
1612
MISC1401-SF1

HEB120
AJ1
MISC1401-SF2
HEB160

SECTION AJ1 - AJ1

MISC1401-SF8

MISC1401-SF17

MISC1401-CL3
2728
HEB160
MISC1401-SF2

AJ - AJ
2525

2525

EL.+1.414
MISC1401-SF3

91401_V_01
HEB160

HEB260
HEB200
HEB160

(T.O.S)
2033

HEB120

HEA100
CLIENT:
914

EL.+0.500
BOTTOM OF BASE PLATE EL.+0.500 EL.+0.500 EL.+0.500 EL.+0.350 EL.+0.500 EL.+0.500
BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE BOTTOM OF BASE PLATE CONTRACTOR:

AJ2 AJ2 - AJ2

PIPING SUPPORT SECTION AJ2 - AJ2
SPS-ICA-0699 SECTION AC - AC PIPING SUPPORT SECTION AJ3 - AJ3 SECTION AK - AK
(LOOKING NORTH) PIPING SUPPORT E-08-A/B/C SPS-ICA-1788 PIPING SUPPORT
(LOOKING NORTH) SPS-ICA-1789
SPS-ICA-0354 (LOOKING WEST)
(LOOKING NORTH)
VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL PIPING SUPPORTS
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. PLAN AT EL. +0.500 (BOBP) & EL. +4.162 (TOS)
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 5/16 B
STR-DWG-0021

A0
DATE

GRID
1.SR31 2.SR31
BY

510
2140
MISC1401-LD6
65 190 190 65 UNP100 MISC1401-SG3
DISCIPLINE

1070 1070

151
151
1.SR31 2.SR31 50 50 BK1 BK1 BL1 BL1

45

45
8 - 20 Ø HOLES

65
571 499 506 564
BK2 BK2
2140
HEB260

639

669
2 - 30 Ø HOLES
MISC1401-CL2 MISC1401-CL2

1235
1235
190
55
HEB260
DATE

HEB260 2 - 22 Ø HOLES
B.SR31 R380

15
FOR M20

GRID
ANCHOR FASTNER 300

510

460
300

15

45°
EL.+0.600 EL.+0.600

190
B.SR31

648
45°

445

618
BASEPLATE
HEB260 HEB260 510 X 510 X 20 (T.O.G)
HEB260 (T.O.G)
BY

250

250
1000
91401-K-03A/B
AX AX

65
285 95
DISCIPLINE

60

60
461

461
1000

MISC1401-CL1 MISC1401-CL1 HEB260

HEB260 HEB260

445
DETAIL- 8
MISC1401-FR1
HEB260
SECTION BK1 - BK1
2 - 22 Ø HOLES
FOR M20
ANCHOR FASTNER
A.SR31 A.SR31
DATE

55
150

1200

1200
GRID 639 75
DET- 8 41
MISC1401-SG3

75
TYP
BY

PLAN AT EL. +4.500 TOS

PLAN AT EL. +0.500 BOTTOM OF BASE PLATE HEB260 STOP PIN

55
220
DISCIPLINE

24*300=7200

24*300=7200
SLEEVE

1200

1200

25
MOUNTING PLATE
120 PLATE
32
250 X 120 X 15 BS
DATE

2 - 22 Ø HOLES BK2 - BK2

6260

6260
250
FOR M20
ANCHOR FASTNER
EL.+0.500
BOTTOM OF BASE PLATE

1070

1070
MISC1401-SG1
BY

60 50

60 50
SECTION AX - AX BL2 BL2
DISCIPLINE

2 - 22 Ø HOLES 80
FOR M20 R3
ANCHOR FASTNER

460
DATE

45°
45°

MISC1401-LD7

2450

2450
MISC1401-LD6

2125

2125
UNP100
UNP100
95 285
BY

SECTION BL1 - BL1

DISCIPLINE

EL.-5.660 EL.-5.660

250

250
(T.O.SCREED)
34 639

75
MISC1401-SG1
DATE

SECTION BK - BK SECTION BL - BL STOP PIN

55
220
SLEEVE
MOUNTING PLATE

25
BY

32
DISCIPLINE

SECTION BL2 - BL2

1212 1275 5775 1275 6725 1275

FOUNDATION PIT
91401-V20

450
UNP200
MISC1401-FR6

MISC1401-FR6

MISC1401-FR6
UNP200 UNP200 LADDER DOWN TO
CL
EL.-5.660 (T.O.SCREED)
1275

1275

1275
1095

1095

1095
BK BK
HEB200

HEB200

HEB200
HEB200 HEB200 HEB200
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

UNP200 UNP200 MISC1401-LD7

UNP100 300

UNP200 CL OF
RUNG

BL
EL.-5.660 (T.O.SCREED)
OF LADDER DOWN TO
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

CL

450

MISC1401-LD6
UNP100
CL OF RUNG

CLIENT:
300

CONTRACTOR:

BL
PLAN AT EL. +0.020 TOS
STAIRS STEEL STRUCTURES TO PIT-V20 VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL SILENCER BLOWER SUPPORT
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. PLAN AT EL. +0.500 (BOBP) & EL. +4.500 (TOS)
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 7/16 B
STR-DWG-0021

A0
 1.8 2.8 3.8
DATE

4480

2100 2380
BY

CL OF RUNG

MISC1401-LD4 350 UNP160

FLT10*65
DISCIPLINE

LADDER FROM
EL.+0.450
CL
1.8 2.8 3.8

850
V TO EL.+3.280(TOG) V
L75*8 400 400
4480

500
EL. +3.250 (TOS)
DATE

MISC1401-B36 MISC1401-B46 HEB160 HEB160

171
2100 2380 HEB160 HEB160
F.8 F.8
CL OF RUNGS
MISC1401-LD4 B

MISC1401-B14
350
BY

FLT10*65
350 L75*8

895

HEB160
LADDER FROM 37
DISCIPLINE

456
EL.+0.450
MISC1401-CL9 C
L TO EL.+3.280 (TOG) MISC1401-B25

109
HEB160 MISC1401-CL15 MISC1401-CL16 HEB160
HEB160

204 216
MISC1401-B24

500
HEB160
IPE160 MISC1401-PS1
HEB140

32
F.8 F.8 UNP100 401
EL. +3.225 (TOS) B EL.+3.250

2540
MISC1401-FR5
DET- 1 813 (T.O.S)
DATE

DET- 1 C C HEB160

1109
1.8

3000
SPS-IC-0031E EL.+3.250 MISC1401-B18
HEB160
(T.O.S)

333
UNP100 UNP100
EL. +3.220 (TOS)
BY

MISC1401-B41 MISC1401-SF31

213
MISC1401-B24
IPE160 IPE160 UNP160 EL.+2.600 UNP100

MISC1401-SF49
(T.O.S)

38

651
DISCIPLINE

MISC1401-B35
2540
D 181
D
MISC1401-B19 HEB160 MISC1401-SF47

L75*8
3000

UNP100

HEB160
HEB160 602
MISC1401-SF35 EL.+2.599 L75*8

996
16
HEB100 E.8.1 (T.O.S)
SECTION A3 - A3
MISC1401-B34 E E

279
DATE

HEB160 32 196
MISC1401-CL17
E.8

307
HEB160
SECTION H1 - H1
E.8.1 A2
BY

MISC1401-CL8
MISC1401-CL14 24 330
HEB160 UNP80
HEB160 HEB160
272

627
MISC1401-SF49 CL OF SPLICE
DISCIPLINE

L75*8
E.8

264
MISC1401-B24 MISC1401-B24 HEB160 4 - 22 Ø HOLES 50 60 50
IPE160 IPE160 UNP80 4 - 22 Ø HOLES

3000

27.5
810
290

291
MISC1401-SF38
L75*8
H1 H1 25
F F A3

MISC1401-B18
2800
32 UNP100 HEB160

940

27.5
DATE

MISC1401-B40
HEB160 MISC1401-LP4
MISC1401-B2
30 30 PL10*107 BS

HEB160
HEB160

3000
UNP80 HEB160

253
MISC1401-B23 HEB160
10

602
IPE160
A2 GAP
2800

MISC1401-SF41

1060
15
BY

UNP160 MISC1401-SF47
MISC1401-B24

MISC1401-B33
H H IPE160
UNP100
DETAIL- 9 SECTION A2 - A2
MISC1401-SF25
G G
DISCIPLINE

HEB160

439
926
UNP160 HEB160

613
MISC1401-SF46 355 SPS-IC-0095E
UNP160 D.8.1
MISC1401-B32

370
HEB160

19
MISC1401-CL17
HEB160 UNP80
D.8 A3
MISC1401-CL7
MISC1401-CL13
HEB160 UNP160 J J

34
D.8.1
DATE

HEB160
MISC1401-B22
305 395 GRID

703
IPE160 UNP160

MISC1401-FR5
D.8 MISC1401-PS2
UNP160 360

260
MISC1401-SF24 BASEPLATE

UNP80
HEB100 HEB160

13000
360 X 360 X 20

1170

HEB160
1400
MISC1401-B43 50 260 50 4 - 20 Ø HOLES
BY

HEB160

2240
80

50
96
HEB160 PLATE
K K MISC1401-B39 MISC1401-B1 200 X 80 X 10
13000

IPE160
1400

HEB160

697
DISCIPLINE

L L MISC1401-B44

15
426
IPE160
MISC1401-B30
MISC1401-CL6 MISC1401-CL12

360

260
HEB160 MISC1401-SF29
HEB160 HEB160 GRID

220
HEB100
C.8

15
MISC1401-PS3
UNP80
A A EL.+0.550

378
513 585 HEB160 280 BOTTOM OF BASE PLATE
MISC1401-B31
C.8

3940
HEB160 SPS-IC-0376E DET- 9 DET- 9

150
50
HEB160
974
2 - 30 Ø HOLES
3940

30 30 SHEAR KEY
UNP100 CL OF SPLICE
EL. +3.220 (TOS) MISC1401-LP4

395
380 PL10*107
MISC1401-B10 MISC1401-B24
IPE160 IPE160 MISC1401-LP4
MISC1401-LP4
PL10*107 DETAIL- 1 SECTION A - A
PL10*107

221
MISC1401-LP4

MISC1401-B48
MISC1401-B38
PL10*107
M M HEB160
GRID

763
MISC1401-B16
MISC1401-SF23 GRID

HEB160
HEB160

1700
360
2900

HEB100
960
2900

MISC1401-SF40 HEB160
MISC1401-B21 50 260 50
HEB160

UNP160 UNP100
IPE160
355

50
UNP100 4 - 20 Ø HOLES
EL. +3.221 (TOS) N N PLATE HEB160
753 2 - 30 Ø HOLES 200 X 80 X 10
MISC1401-CL17 80

221
UNP100 MISC1401-B24 HEB160
HEB160 P1 P1

30
60

EL. +3.220 (TOS) IPE160 MISC1401-B45

P P
459

360

260
HEB160
GRID
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

B.8.1 32 B.8.1

200
30
A1 A1
966

MISC1401-SF11
L75*8 EL.+0.550
MISC1401-CL5 MISC1401-CL11 BOTTOM OF BASE PLATE
MISC1401-SF44
335

513
800

HEB160 HEB160 MISC1401-SA2

UNP160

800

50
MISC1401-CL17 L75*8
MISC1401-B29

150
HEB160
HEB160 HEB160
B.8 15 15
B.8 MISC1401-B20 SHEAR KEY
A.8.2
134

HEB160
A.8.2 100
DET- 2 DETAIL- 2
MISC1401-B27
MISC1401-B27

TYP UNP100
EL. +3.221 (TOS)
973

SECTION A1 - A1
UNP160
UNP160

860
MISC1401-SF22
L75*8 MISC1401-B26 MISC1401-B42 UNP80 330
1960

IPE160 IPE160
9

32 MISC1401-SF20 304

1960
395
352
2900

HEB100 UNP80
24

MISC1401-FR4
MISC1401-B37

MISC1401-CL16 Q Q
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

HEB160 MISC1401-SF42
1.8
2900

960

279

HEB100

920
HEB160

HEB160
R R 355
333

332

A.8.1 MISC1401-B24 MISC1401-B24

248 211

IPE160 IPE160 395 90

DET- 1 513 EL.+3.619

635

UNP160
760

MISC1401-CL10 (T.O.S)
UNP100 UNP80 A.8.1
MISC1401-B47

MISC1401-CL4
HEB160 HEB160
LADDER FROM
EL.+0.500
EL. +3.221 (TOS)
HEB160
FOR SEC VIEW B-B TO V-V
CL REFER DWG. SHT NO: 13/16
967

HEB160

TO EL.+3.280 (TOG) UNP100 MISC1401-B15

634
MISC1401-SF44
A.8 EL. +3.220 (TOS) HEB160 UNP160
EL.+3.250

1000
DET- 1 MISC1401-B28 S T
LADDER FROM
EL.+0.500
(T.O.S) CLIENT:

217 MISC1401-LD5 HEB160 CL

FLT10*65 U TO EL.+3.280 (TOG) U
DET- 1 CL OF RUNGS
A.8
39

MISC1401-B21
2100 2380 MISC1401-SF27 MISC1401-SF28 IPE160
UNP100 60 436 L75*8
CONTRACTOR:

MISC1401-LD5
S T FLT10*65 UNP160
SECTION P1 - P1
1050 1050
PLAN AT EL. +0.550 BOTTOM OF BASE PLATE
2100 2380 217 200
CL OF RUNGS
VENDOR:

PLAN AT EL. +3.250 TOS

NOTES: HOLDS: PROJECT TITLE:
DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL 91401_V26_V28_V31_V32
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. PLAN AT EL. +0.550 (BOBP) & EL. +3.250 TOS
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 3/16 B
STR-DWG-0021

A0
DATE

1.SR31 2.SR31 STRUCTURE SUPPORT

FOR SILENCER BLOWER
91401-K-03A/B

B.SR31
BY

1000
A.SR31
DISCIPLINE

2140 1907 26525

DATE

8094
BY
DISCIPLINE

1.8 2.8
SPS-ICA-0028
91401_V26_V28_V31_V32
3.8
E 375.720
N 223.500

1150
DATE

F.8 F.8

2540
3000
BY

E.8.1
E.8
DISCIPLINE

3000
2800
D.8.1
D.8
DATE

13000

1400
C.8

15048

3940
BY

2900
DISCIPLINE

B.8.1

800
B.8
A.8.2

1960
E-08-1

2900
DATE

4057 3288 A.8.1

760
91401_E_08A A.8

E-08-C
BY

SPS-ICA-0699

1970
91401_E_08B
DISCIPLINE

871

SPS-ICA-0354
E-08-B
720 2100 3530

2660
91401_E_08C
SPS-ICA-1788
DATE

SPS-ICA-1789
E-08-A
1930 6202 2736
BY

G.I
28102
DISCIPLINE

17500
2426

SPS-ICA-1789
2255

SPS-ICA-1788

27685
91401_V_01
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

V1 V2
1850 7050 8000 7800
91401_PIT-V20 600 600 600 600
600 600

2238
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

2080 3420

VA
SUPPORT CABLE

2130
TRAYS 4000

VA.1

SPS-ICA-0476 1870
CLIENT:

VB

23686
(NTS)
910

SPS-ICA-0070
2915

SPS-ICA-0479
CONTRACTOR:

SPS-ICA-0478
SPS-ICA-0484

SPS-ICA-0483 6000
GS
91401_C_10
8000
VENDOR:
RACK PR-G
PLANT STRUCTURES MISCELLANEOUS ITEM 1401 G1 G2

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. PLANT STRUCTURES MISCELLANEOUS ITEM 1401
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 2/16 B
STR-DWG-0021

A0
DATE

2.8
940 520
BY

EL.+5.182

168
DISCIPLINE

(T.O.S) UNP180

2.8
2.8 132 172
EL.+4.445 EL.+4.460
DATE

449 16
(T.O.S)
22

MISC1401-PS1
2.8 (T.O.S)

940
2.8

HEB140
L100*10 181 335 92
HEB100 L75*8 1.8
EL.+4.104 152 201 EL.+4.104
BY

(T.O.S) (T.O.S)
UNP160
EL.+3.250
(T.O.S)

MISC1401-SF38
1932

MISC1401-SF35
DISCIPLINE

UNP160

1210
1195

HEB100

MISC1401-SF41
MISC1401-SF31

L75*8
MISC1401-SF25

854

854
UNP160

769
UNP160
UNP160
EL.+3.250
DATE

T.O.S
125 150
EL.+3.250 EL.+3.250 EL.+3.250 EL.+3.250 EL.+2.481
364

20
(T.O.S) (T.O.S) (T.O.S) (T.O.S) (T.O.S)
6
EL.+2.886
L75*8 T.O.S EL.+3.250
BY

MISC1401-SF13 (T.O.S) MISC1401-B2 UNP160

L75*8 HEB160

MISC1401-B41 430 90
DISCIPLINE

32 424 IPE160

MISC1401-B14 SECTION E - E SECTION F - F SECTION G - G

HEB160
SECTION D - D SECTION H - H
SECTION B - B
SECTION C - C
PIPING SUPPORT
DATE

SPS-IC-0031E
BY

2.8
DISCIPLINE

550

126 195 1.8

1.8
L75*8
740
600 1.8
2.8
313

L75*8 150 90 EL.+4.416 365 375 365

EL.+4.401 275 325
DATE

EL.+4.387 (T.O.S) 427

(T.O.S) (T.O.S) 246 119
20

335 92 EL.+4.400 3
1.8
HEB100 EL.+4.104 1.8
EL.+3.250
(T.O.S)
HEB100
(T.O.S) UNP160 EL.+3.250
BY

UNP160 300 (T.O.S) (T.O.S)

MISC1401-SF24

EL.+3.870 150 150 HEB100

MISC1401-SF20
MISC1401-SF23
DISCIPLINE

(T.O.S)
HEB100

1166
MISC1401-PS2

MISC1401-SF40
1151

782
1137

HEB100

HEB100
HEB100

MISC1401-SF11
745

745
UNP160

854

UNP160
MISC1401-SF22
L75*8 EL.+3.619 358

620
MISC1401-SF29

L75*8
HEB100 (T.O.S)

EL.+2.505 EL.+2.505
DATE

EL.+3.250 EL.+3.250 EL.+3.250 EL.+3.250 EL.+3.250 (T.O.S)

L75*8 (T.O.S)
L75*8

(T.O.S) (T.O.S) UNP100

(T.O.S) (T.O.S) (T.O.S)

369
EL.+3.250 UNP160

29
321 32 (T.O.S)
321 32
BY

MISC1401-B48 752
HEB160
SECTION L - L SECTION M - M SECTION P - P
DISCIPLINE

SECTION K - K
SECTION Q - Q
SECTION N - N SECTION R - R
SECTION J - J
PIPING SUPPORT
SPS-IC-0095E

3.8
2.8
217 350

45
MISC1401-SG1

182
45

V1 V1
203

U1 U1 U2 U2
75 639

540
639
618

A.8 R 38

1235
0 34 MISC1401-SG1

926
1235

74
460
329 FLT10*115

45°
EL.+3.280

386
EL.+3.280
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

60 269 45°
EL.+4.346

55
(T.O.G)

220
UNP160 STOP PIN
(T.O.G)
(T.O.S) SLEEVE
EL.+3.250

639
A.8 EL.+3.250
639

25
386 285 95

55
(T.O.S) MOUNTING PLATE
55

(T.O.S)
39 242 30 25
UNP100 766
EL.+3.974

50
50

11*300=3300
11*300=3300

(T.O.S)
MISC1401-SF27

200 SECTION U2 - U2
SECTION U1 - U1
630
MISC1401-SF28
1096

630
UNP100

L75*8
4065
4015
724

L75*8

766
EL.+3.250 EL.+3.250 MISC1401-LD5
(T.O.S) (T.O.S)
FLT10*65 386 285 95
2830
2780

75 639
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

MISC1401-LD4
FLT10*65 40 MISC1401-SG4

74
386
45°
1975
1925

SECTION S - S SECTION T - T FOR SEC MARK B-B TO V-V

45°

55

220
STOP PIN
UNP160
REFER DWG. SHT NO: 3/16

460
796
SLEEVE
0
FLT10*115
38

25
2*240=480 MOUNTING PLATE
223

R
55

410
16Ø BOLT WITH 16Ø BOLT WITH
30 25
FLAT WASHER & NUT FLAT WASHER & NUT
223

TIGHTEN NUT & BURR TIGHTEN NUT & BURR

50

BOLT THREADS EL.+0.450 BOLT THREADS

SECTION V2 - V2
EL.+0.500 (T.O.GROUT)
240

CLIENT:
V2 V2
224

(T.O.GROUT)
EL.+0.300 MISC1401-SG4
EL.+0.300
200

(FGL)
(FGL) HILTI BOLT
SECTION V1 - V1
150

HILTI BOLT
CONTRACTOR:

SECTION U - U
SECTION V - V

VENDOR:

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL 91401_V26_V28_V31_V32
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. SECTIONS
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 13/16 B
STR-DWG-0021

A0
DATE

1850 7050 8000

BY

BD
AY AZ FOUNDATION PIT
BA BC
600 600
91401-V20
600 600
BB 600 600
DISCIPLINE
DATE

114

114

114
MISC1401-SA1 MISC1401-SA1
L75*8 L75*8
1262 1176 5874 1176 6824 1176 MISC1401-SA1
L75*8
BY

(DN)

(DN)
(DN)
MISC1401-ST1 MISC1401-ST1
UNP200 MISC1401-ST1
UNP200 UNP200
DISCIPLINE

MISC1401-ST2
MISC1401-ST2 UNP200 MISC1401-ST2
UNP200 UNP200

AZ BC
DATE

AY BA BB BD
BY

STAIR PLAN AT EL. +0.600 TOG

DISCIPLINE

MISC1401-HR44
200 562 418 CHS42.4*3.6
DATE

200 562 425 200 562 425

200 562 425
MISC1401-HR42
CHS42.4*3.6
BY

37
HR 39
-
01 .6 - HR
14 .4*3 01 .6

480
C
S 2 14 .4*3
DISCIPLINE

MI HS4 C
S 2

480
MI HS4 121 171

480
C
C

480
122 171
121 171

121 171
DATE

460
460

460

620
480
460
BY

650
480

650
480

650
BE

480
EL.+0.600 EL.+0.600
DISCIPLINE

EL.+0.600 (T.O.G) 275 750 325

(T.O.G) 275 750 325
(T.O.G)
EL.+0.600

50
3X250=750 275 750
W.P
325
BG (T.O.G) EL.+0.570 3X250=750 W.P
EL.+0.570 EL.+0.570
50

W.P 275 750 325 (T.O.S)

EL.+0.570

50
(T.O.S) 3X250=750
(T.O.S) 3X250=750 250 250

50
W.P
(T.O.S)

100
TYP

MISC1401-HR53
250
MISC1401-HR49

250 250
100

250 250
DATE

100

3X183=550

734
TYP TYP

100
TYP

MISC1401-HR49
MISC1401-HR53
3X183=550

734

TYP
620
550

183
3X183=550

734

L50*6
3X183=550
TYP

734
624
550

183
L50*6

250

TYP
624
550

183
MISC1401-LP3
BE

TYP
620
EL.+0.050

550

183
PL15*290

L50*6
L50*6 MISC1401-LP3
EL.+0.050
BY

MISC1401-LP2 (T.O.G)
EL.+0.050 PL15*290 W.P

73
PL15*290 MISC1401-ST2
(T.O.G) MISC1401-ST1 (T.O.G) W.P
BG EL.+0.050 EL.+0.020 UNP200
73

UNP200 MISC1401-ST2

73
W.P MISC1401-ST1 100

50
(T.O.G) (T.O.S)
EL.+0.020 EL.+0.020 UNP200

73
DISCIPLINE

MISC1401-FR6 BF UNP200
100 EL.+0.020 W.P

50
(T.O.S) HEB200 (T.O.S) 100
MISC1401-FR6

50
100

100
(T.O.S) HEB200

100

100
HEB200
142 MISC1401-LP1 HEB200 MISC1401-LP1 40 60
PL15*270 40 60 PL15*270 142 142 879
142 40 60 MISC1401-LP1 40 60
879 879 PL15*270 MISC1401-LP1
1350 PL15*270
879
BF 1350
1350 1350

SECTION AY - AY SECTION AZ - AZ SECTION BB - BB

SECTION BA - BA

200 562 425 200 562 425

MISC1401-HR47
MISC1401-HR42 CHS42.4*3.6
CHS42.4*3.6
NOTICE: THIS DRAWING AND THE INFORMATION IT CONTAINS ARE THE SOLE PROPERTY OF PETROCHINA COMPANY LIMITED (HALFAYA).

270 290
290
MISC1401-LP1
480

MISC1401-LP2

480
PL15*290 PL15*270 85 120 85 4 - 18 Ø HOLES
85 120 85 85 100 85
FOR M16
ANCHOR FASTNER

50

50
121 171

50
123 171
MISC1401-LP3
PL15*290

100

100
100
4 - 18 Ø HOLES

310

310
310
4 - 18 Ø HOLES FOR M16 L100*10
FOR M16 ANCHOR FASTNER (WELDING TO PL)

160

160
160
ANCHOR FASTNER
460

460

L100*10 L100*10
(WELDING TO PL) (WELDING TO PL) 40 116
85 100 85
650

650
480

480

EL.+0.600 EL.+0.600
(T.O.G) (T.O.G) SECTION BE - BE SECTION BF - BF SECTION BG - BG
IT SHALL NOT BE REPRODUCED OR LENT WITHOUT THE AGREEMENT OF THE OWNER.

275 750 325 275 750 325

EL.+0.570 3X250=750 EL.+0.570 3X250=750
50

50

W.P W.P
(T.O.S) (T.O.S)
250 250 250 250
MISC1401-HR49

100

TYP
100

TYP
MISC1401-HR53
3X183=550

3X183=550
734

734

250
L50*6

TYP
620

TYP
620
550

183

550

183

NOSING 30 100
L50*6

MISC1401-ST1 MISC1401-LP3
EL.+0.050 EL.+0.050

55
UNP200 PL15*290
73

(T.O.G)

20
MISC1401-LP2
73

W.P (T.O.G)

80
PL15*290 MISC1401-ST2 CLIENT:
W.P
EL.+0.020 100
EL.+0.020 UNP200

25
MISC1401-FR6 100 25
50

50

(T.O.S) HEB200 (T.O.S) MISC1401-TR1

1-14Ø HOLE
FOR M12 BOLTS 225 L50*6
100

100

1 - 14X30 LG SLOTTED CONTRACTOR:

HOLE IN ANGLE
FOR M12 BOLTS

HEB200
142 40 60 142
MISC1401-LP1
TREAD DETAIL
879 PL15*270 40 60
MISC1401-LP1 879
1350 PL15*270
1350
VENDOR:

SECTION BC - BC
SECTION BD - BD

NOTES: HOLDS: PROJECT TITLE:

DOCUMENT No. REFERENCE DRAWINGS REV. DATE DESCRIPTION PREP'D CHK'D REV'D APP'D
1. ALL DIMENSIONS ARE IN MILLIMETERS AND ALL COORDINATES 6. FOR STRUCTURAL GENERAL NOTES REFER TO DRAWING EPCCOM FOR GAS PROCESSING PLANT
ELEVATIONS ARE IN METERS UNLESS OTHERWISE NOTED. HFY-3800-0000-STR-DWG-0001-01_0. HFY-3800-0000-STR-DWG-0002 STANDARD DRAWING - STEEL STAIR A 08.05.2023 ISSUED FOR APPROVAL DK ARN PAR RTS
2. DO NOT SCALE THE DWG FOLLOW WRITTEN DIMENSIONS. 7. ALL PAINTING AND COATING SHALL BE AS PER PROJECT SPECIFICATION
HFY-3800-000-CPR-SPC-0005 DRAWING TITLE:
3. FINISHES : PLEASE REFER THE PROJECT SPECIFICATION. HFY-3800-0000-STR-DWG-0003 STANDARD DRAWING - LADDER B 15.07.2023 RE-ISSUED FOR APPROVAL DK ARN PAR RTS
8. GRATINGS & CHEQUERED PLATES SHALL BE HOT DIP GALVANIZED ERECTION GA DRAWINGS OF MISCELLANEOUS STEEL STRUCTURES - SRU
4. ALL WELDS SHALL BE AS MINIMUM 6MM CONTINUOUS FILLET (MIN. GALVANIZATION SHALL BE 600 G/M2)
ALL AROUND WELD UNLESS NOTED OTHERWISE. HFY-3800-0000-STR-DWG-0004 STANDARD DRAWING - HANDRAIL STAIRS STEEL STRUCTURES TO PIT-V20
9. DENOTES SHOP MARK & SHALL BE PROVIDED BY THE FABRICATOR
5. WELDING ELECTRODES SHALL BE OF AWS A5.1., E70 SERIES ON FLANGE OF MEMBER/FACE OF PLATES ON EACH ASSEMBLY AS
CLASSIFICATION OR APPROVED EQUIVALENT AND AWS A5.1 STRUCTURAL GA, ELEVATIONS & DETAILS
SHOP DETAIL DRAWINGS SAME IS TO BE REFERRED FOR ORIENTATION HFY-3800-0000-STR-DWG-0005 STANDARD DRAWING - GRATING, CHEQUERED PLATE
E60 SERIES OR EQUAL SHOULD BE USE ONLY FOR STAIR, DURING ERECTION OF THE ASSEMBLY. STAIR PLAN AT EL. +0.600 TOG
LADDER, HANDRAIL & FLOORING
Tekla Structures

AND STAIR TREAD STAGE DRAWING NO. SHT. REV.

HFY-3800-0000-VED-197
STR-DESIGN- 14/16 B
STR-DWG-0021

A0