Bid Number/बोली मांक ( बड सं या) :

GEM/2023/B/3721824
Dated/ दनांक : 25-07-2023

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 04-08-2023 14:00:00

Bid Opening Date/Time/ बड खुलने क

04-08-2023 14:30:00
तार ख/समय

Bid Offer Validity (From End Date)/ बड पेशकश

180 (Days)
वैधता (बंद होने क तार ख से)

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Coal

Department Name/ वभाग का नाम Central Mine Planning And Design Institute Limited

Organisation Name/संगठन का नाम Central Mine Planning And Design Institute Limited

Office Name/कायालय का नाम Regional Institute 1

Total Quantity/कुल मा ा 3630

Extreme Pressure Gear Oil as per IS 1118 (Q3) , Oil

Item Category/मद केटे गर Hydraulic as per IS 10522 (Q2) , Lithium Base Grease for
Industrial Purposes as per IS 7623 (Q3)

Years of Past Experience Required for

same/similar service/उ ह ं/समान सेवाओं के िलए 3 Year (s)
अपे त वगत अनुभव के वष

MSE Exemption for Years Of

Yes
Experience/अनुभव के वष से एमएसई छूट/

Startup Exemption for Years Of

Yes
Experience/अनुभव के वष से टाटअप छूट/

Experience Criteria,Past Performance,Certificate (Requested

in ATC),OEM Authorization Certificate,Additional Doc 1
Document required from seller/ व े ता से मांगे (Requested in ATC)
*In case any bidder is seeking exemption from Experience /
गए द तावेज़ Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Past Performance/ वगत दशन 50 %

Bid to RA enabled/ बड से रवस नीलामी स य कया No

Type of Bid/ बड का कार Two Packet Bid

Primary product category Extreme Pressure Gear Oil as per IS 1118

1/9
 Bid Details/ बड ववरण

Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 3 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)

Evaluation Method/मू यांकन प ित Total value wise evaluation

EMD Detail/ईएमड ववरण

Advisory Bank/एडवाईजर बक State Bank of India

EMD Amount/ईएमड रािश 22077

ePBG Detail/ईपीबीजी ववरण

Advisory Bank/एडवाइजर बक State Bank of India

ePBG Percentage(%)/ईपीबीजी ितशत (%) 10.00

Duration of ePBG required (Months)/ईपीबीजी क

2
अपे त अविध (मह ने).

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this
Policy./जेम क शत के अनुसार ईएमड छूट के इ छुक बडर को संबंिधत केटे गर के िलए बड के साथ वैध समिथत द तावेज़ तुत करने है ।
एमएसई केटे गर के अंतगत केवल व तुओं के िलए विनमाता तथा सेवाओं के िलए सेवा दाता ईएमड से छूट के पा ह। यापा रय को इस नीित के
दायरे से बाहर रखा गया है ।

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।

Beneficiary/लाभाथ :
CMPDI LTD, REGIONAL INSTITUTE, ASANSOL
Regional Institute 1, CENTRAL MINE PLANNING and DESIGN INSTITUTE Limited, CENTRAL MINE PLANNING and
DESIGN INSTITUTE Limited, Ministry of Coal
(Cmpdi, Regional Institute, Asansol)

Splitting/ वभाजन

Bid splitting not applied/बोली वभाजन लागू नह ं कया गया.

MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता Yes

2/9
MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. If the bidder is a Startup, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and
"Experience Criteria" subject to their meeting of quality and technical specifications. If the bidder is OEM of the
offered products, it would be exempted from the "OEM Average Turnover" criteria also subject to meeting of
quality and technical specifications. In case any bidder is seeking exemption from Turnover / Experience Criteria,
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer.
3. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
4. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.

5. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%
(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be
given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of
total QUANTITY.The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.
6. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 50% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.

Extreme Pressure Gear Oil As Per IS 1118 ( 1260 pieces )

3/9
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

* As per GeM Category Specification/जेम केटे गर विश के अनुसार

Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed

Specification
नाम Values)/अनुमत मू य

Generic Oil Types EP Type GL-4

Viscosity Grades SAE 90

Packaging Packaging Size 210 Or higher (liter)

Packaging Material Metal Container

Additional Specification Parameters - Extreme Pressure Gear Oil As Per IS 1118 ( 1260 pieces )
Specification Parameter
Bid Requirement (Allowed Values)
Name

Make Only PSU make product will be accepted

* Bidders offering must also comply with the additional specification parameters mentioned above.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

713304,CMPDI LTD., REGIONAL

SANTHOSH KUMAR
1 INSTITUTE-1, G. T. ROAD 1260 60
GUMMADI
(WEST), ASANSOL

Oil Hydraulic As Per IS 10522 ( 1470 liter )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

* As per GeM Category Specification/जेम केटे गर विश के अनुसार

4/9
 Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed
Specification
नाम Values)/अनुमत मू य

Grade Grade of Oil Hydraulic VG-32

REQUIREMENTS FOR Kinematic viscosity at (28.8-35.2) for VG 32 grade

OIL HYDRAULIC 40°C,cSt

Additional Specification Parameters - Oil Hydraulic As Per IS 10522 ( 1470 liter )

Specification Parameter
Bid Requirement (Allowed Values)
Name

Make Only PSU make product will be accepted

* Bidders offering must also comply with the additional specification parameters mentioned above.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

713304,CMPDI LTD., REGIONAL

SANTHOSH KUMAR
1 INSTITUTE-1, G. T. ROAD 1470 60
GUMMADI
(WEST), ASANSOL

Lithium Base Grease For Industrial Purposes As Per IS 7623 ( 900 kilogram )
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

* As per GeM Category Specification/जेम केटे गर विश के अनुसार

Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed

Specification
नाम Values)/अनुमत मू य

Types Type Regular

Grade Grade of Lithium Base Grade 2

Grease for Industrial
Purposes

Requirement for "Consistency of worked 265-295 for grade 2

Lithium Base Grease grease at 25±5°C : 60
for Industrial double strokes "
Purposes

5/9
 Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed
Specification
नाम Values)/अनुमत मू य

"Free organic acidity (as 0.1 (for 1, 2, 3 grade)

oleic), percent by mass,
Max"

Packing , Marking The material shall be MS Barrels

and Labelling packed in metal or any
other suitable containers as
agreed to between the
purchaser and the supplier

Additional Specification Parameters - Lithium Base Grease For Industrial Purposes As Per IS 7623 (
900 kilogram )
Specification Parameter
Bid Requirement (Allowed Values)
Name

Make Only PSU make product will be accepted

* Bidders offering must also comply with the additional specification parameters mentioned above.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

713304,CMPDI LTD., REGIONAL

SANTHOSH KUMAR
1 INSTITUTE-1, G. T. ROAD 900 60
GUMMADI
(WEST), ASANSOL

Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत

1. Generic

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.

2. Forms of EMD and PBG

Bidders can also submit the EMD with Account Payee Demand Draft in favour of

CMPDI LTD, REGIONAL INSTITUTE, ASANSOL

payable at

6/9
 ASANSOL
.
Bidder has to upload scanned copy / proof of the DD along with bid and has to ensure delivery of hardcopy
to the Buyer within 5 days of Bid End date / Bid Opening date.

3. Forms of EMD and PBG

Bidders can also submit the EMD with Payment online through RTGS / internet banking in Beneficiary
name

CMPDI LTD, REGIONAL INSTITUTE, ASANSOL

Account No.
11214095558
IFSC Code
SBIN0000011
Bank Name
STATE BANK OF INDIA
Branch address
ASANSOL
.
Bidder to indicate bid number and name of bidding entity in the transaction details field at the time of on-
line transfer. Bidder has to upload scanned copy / proof of the Online Payment Transfer along with bid.

4. Generic

Bidders shall quote only those products (Part of Service delivery) in the bid which are not obsolete in the
market and has at least 1 years residual market life i.e. the offered product shall not be declared end-of-
life by the OEM before this period.

5. Certificates

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.

6. Generic

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

a. Copy of PAN Card.

b. Copy of GSTIN.

c. Copy of Cancelled Cheque.

d. Copy of EFT Mandate duly certified by Bank.

7. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

Only Indian Public Sector Oil Company make products will be accepted. Bidder must possess valid Authori
zed Dealership Certificate of the Public Sector Oil Company whose product is offered.

8. Generic

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU / Public Listed Company for 3 years before the bid opening date. Copies of relevant contracts to be
submitted along with bid in support of having supplied some quantity during each of the year. In case of
bunch bids, the primary product having highest value should meet this criterion.

9. Generic

7/9
 Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the
bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation,
address, e-mail Id and Phone No. required to be furnished along with the bid

10. Past Project Experience

Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any
one of the following documents may be considered as valid proof for meeting the experience criteria:a.
Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the
invoices have been executed.b. Execution certificate by client with contract value.c. Any other document
in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and
Project Experience clause: For fulfilling the experience criteria any one of the following documents may be
considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with
self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution
certificate by client with contract value.c. Any other document in support of contract execution like Third
Party Inspection release note, etc.

11. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also
(besides PBG which is allowed as per GeM GTC). DD should be made in favour of

CMPDI LTD, REGIONAL INSTITUTE, ASANSOL

payable at
ASANSOL
. After award of contract, Successful Bidder can upload scanned copy of the DD in place of PBG and has to
ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of contract.

12. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Payment online through RTGS /
internet banking also (besides PBG which is allowed as per GeM GTC). On-line payment shall be in
Beneficiary name

CMPDI LTD, REGIONAL INSTITUTE, ASANSOL

Account No.
11214095558
IFSC Code
SBIN0000011
Bank Name
STATE BANK OF INDIA
Branch address
ASANSOL
. Successful Bidder to indicate Contract number and name of Seller entity in the transaction details field at
the time of on-line transfer. Bidder has to upload scanned copy / proof of the Online Payment Transfer in
place of PBG within 15 days of award of contract.

13. Generic

Shelf Life: The Product/Spare parts to be supplied as part of the services must have minimum

1 Year
Shelf Life. On the date of supply, minimum
1 year
usable shelf life should be available / balance.

14. Warranty

Timely Servicing / rectification of defects during warranty period: After having been notified of the defects
/ service requirement during warranty period, Seller has to complete the required Service / Rectification
within 10 days time limit. If the Seller fails to complete service / rectification with defined time limit, a
penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the
seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all
such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than

8/9
 10% of the total contract value after which the Buyer shall have the right to get the service / rectification
done from alternate sources at the risk and cost of the Seller besides forfeiture of PBG. Seller shall be
liable to re-imberse the cost of such service / rectification to the Buyer.

Disclaimer/अ वीकरण

The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. Any clause(s) incorporated by the Buyer regarding following shall be treated as
null and void and would not be considered as part of bid:-

1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process.
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.

Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.

This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action

in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।

---Thank You/ ध यवाद---

9/9