1 2 3 4 5 6 7 8

1 REFERENCE STANDARD ITEM

296 396 DESCRIPTION MATERIAL
No
ØH DESIGN API 600 / ASME B16.34
1 BODY ASTM A216 GR WCB
PRESSURE - TEMPERATURE
ASME B16.34
RATING 2 SEAT RING ASTM A105 N + STELLITE #6
A FACE TO FACE ASME B16.10 ASTM A216 GR WCB + A
3 WEDGE (FLEXIBLE)
13% CR STEEL
END FLANGE DIMENSIONS ASME B16.5 RF
4 STEM ASTM A182 GR F6a
TEST METHOD API 598
5 GASKET GRAPHITE WITH SS316 INSERT
1
TEST PRESSURE psig bar 6 BONNET ASTM A216 GR WCB

229
SHELL HYDROSTATIC 450 30 7 STUD ASTM A193 GR B7

BACKSEAT HYDROSTATIC 315 22 8 HEX NUT ASTM A194 GR 2H

HYDROSTATIC 9 BACKSEAT RING ASTM A276 TYPE 410

SEAT
PNEUMATIC 80 5.6 10 SPACER RING ASTM A276 TYPE 410
17
B B
11 PACKING GRAPHITE
SEAT TEST PRESSURE : 1.1 TIMES THE ACTUATOR
16
SIZING DIFFERENTIAL PRESSURE ( P) 12 GLAND ASTM A276 TYPE 410
15 18
ACTUATOR DETAIL 13 GLAND FLANGE ASTM A105N / A216 GR WCB

Z 14 MAKE ROTORK 14 EYE BOLT ASTM A193 GR B7

B -(± 5%)

13 11 MODEL IQ12 15 HEX NUT ASTM A194 GR 2H

12 10 POWER SUPPLY 415V, 50Hz, 3 PHASE 16 ADAPTOR S.G.IRON/STEEL

RPM 48 17 ACTUATOR ELECTRICAL TYPE

9
OPERATING TIME (± 10%) 34 s 18 DISC SPRING SPRING STEEL
C 6 DETAIL - Z C
DIFFERENTIAL IDENTIFICATION PLATE SS 304
8 10 bar
PRESSURE ( P)
5
DUTY ON-OFF 1

4
7
3

1
D NOTES : 1 D
1. END FLANGE RAISED FACE FINISH : 3.2 TO 6.3 µm (125 to 250 µin) Ra.
2. SEAT RINGS ARE SEAL WELDED TO THE BODY.
3. BACKSEAT RING IS THREADED-IN AND SECURED BY TAB TO THE BONNET.
4. VALVES ARE IBR CERTIFIED.
5. PAINTING AS PER APPROVED PAINTING PROCEDURE.

PROJECT No PT5311 1

E E
PROJECT NAME RELIANCE HRSG JAMNAGAR

PURCHASER'S NAME THERMAX BABCOCK &WILCOX ENERGY SOLU

A
PURCHASE ORDER No 961001384
TOTAL
SIZE PURCHASER'S UNLESS OTHERWISE SPECIFIED:
A B H WEIGHT kg ITEM No QTY
(NPS) TAG No ALL DIMENSIONS ARE IN mm.
(APPROX) 1 1
ALL PROJECTIONS ARE IN
THIRD ANGLE.
6 267 870 306 118 17 1 PV-GPG942-EV-300752

THIS DRAWING AND DESIGN IS THE PROPERTY OF L&T VALVES LIMITED. IT IS A CONFIDENTIAL DISCLOSURE
WHICH MUST NEITHER BE COPIED NOR USED IN ANY MANNER DETRIMENTAL TO THEIR INTERESTS.

F TITLE : F
PURCHASER'S Design Pressure Design Temp. TBWES DRAWN EG CAST CARBON STEEL GATE VALVE
BAAN PART No LOCATION
TAG No (barg) (°C) SPEC No. CHECKED SS GENERAL ASSEMBLY
S.O. ITEM REF.: 250

1 1
DOF-034-A3-G R0

LP Start-up vent Isolation Valve APPROVED MSM SIZE : REFER TABLE CLASS : 150 TRIM : 8 CAT No : 113
PV-GPG942-EV-300752 Z2M0000017 7 200 Z2M-RT-CS-222273
1 - 17-JUL-2023 PGK SS MSM DATE 28-JUN-2023 DRG No : REV SHEET
REV ECM No DATE PRD CHKD APPD SCALE N.T.S 110028932-LP-001 1 1 OF 1
. 1 2 3 4 5 6 7 8 [A3] .