Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    Sheet 1 Spur Gears

    Uploaded by

    محمود بسيوني نصار
    The document discusses the design of several spur gear drives. It provides instructions for students to determine specifications like module, face width, pitch circle diameters, number of teeth, shaft speeds, and gear dimensions. Students are asked to complete the designs based on given power ratings, torque, speeds, materials and other factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sheet 1 Spur Gears

    Uploaded by

    محمود بسيوني نصار
    15 views2 pages
    The document discusses the design of several spur gear drives. It provides instructions for students to determine specifications like module, face width, pitch circle diameters, number of teeth, shaft speeds, and gear dimensions. Students are asked to complete the designs based on given power ratings, torque, speeds, materials and other factors.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the design of several spur gear drives. It provides instructions for students to determine specifications like module, face width, pitch circle diameters, number of teeth, shaft speeds, and gear dimensions. Students are asked to complete the designs based on given power ratings, torque, speeds, materials and other factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views2 pages

    Sheet 1 Spur Gears

    Uploaded by

    محمود بسيوني نصار
    The document discusses the design of several spur gear drives. It provides instructions for students to determine specifications like module, face width, pitch circle diameters, number of teeth, shaft speeds, and gear dimensions. Students are asked to complete the designs based on given power ratings, torque, speeds, materials and other factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Kafrelsheikh University Assignment No.

    1
    Faculty of Engineering Spur Gears
    Mechanical Engineering Dept.
    Mechanical design

    1. A pair of straight teeth spur gears is to transmit 20 kW when the pinion rotates
    at 300 r.p.m. The velocity ratio is 1: 3. The allowable static stresses for the pinion
    and gear materials are 120 MPa and 100 MPa respectively. The pinion has 15 teeth
    and its face width is 14 times the module.

    Determine:

    a) Module
    b) Face width
    c) Pitch circle diameters of both the pinion and the gear from the standpoint of
    strength only, taking into consideration the effect of the dynamic loading.

    The tooth form factor y can be taken as:

    and the velocity factor Cv as: , where v is expressed in m / s.

    2. A reciprocating compressor is to be connected to an electric motor with the


    help of spur gears. The distance between the shafts is to be 500 mm. The speed of
    the electric motor is 900 r.p.m. and the speed of the compressor shaft is desired to
    be 200 r.p.m. The torque, to be transmitted is 5000 N-m. Taking starting torque as
    25% more than the normal torque, determine:
    a) Module and face width of the gears using 20 degrees stub teeth,
    b) Number of teeth and pitch circle diameter of each gear.
    (Assume suitable values of velocity factor and Lewis factor)

    3. A two-stage reduction drive is to be designed to transmit 2 kW; the input speed


    being 960 r.p.m. and overall reduction ratio being 9. The drive consists of straight
    tooth spur gears only, the shafts being spaced 200 mm apart, the input and output
    shafts being co-axial.
    a) Draw a layout of a suitable system to meet the above specifications,
    indicating the speeds of all rotating components.
    b) Calculate the module, pitch diameter, number of teeth, blank diameter and
    face width of the gears for medium heavy-duty conditions, the gears being of
    medium grades of accuracy.
    c) Draw to scale one of the gears and specify on the drawing the calculated
    dimensions and other data complete in every respect for manufacturing
    purposes.

    Page 1 of 2
    Kafrelsheikh University Assignment No. 1
    Faculty of Engineering Spur Gears
    Mechanical Engineering Dept.
    Mechanical design

    4. A motor shaft rotating at 1500 r.p.m. has to transmit 15 kW to a low-speed shaft


    with a speed reduction of 3:1. The teeth are 14 / 12° involute with 25 teeth on the
    pinion. Both the pinion and gear are made of steel with a maximum safe stress of
    200 MPa. A safe stress of 40 MPa may be taken for the shaft on which the gear is
    mounted and for the key.
    Design a spur gear drive to suit the above conditions. Also sketch the spur gear
    drive. Assume starting torque to be 25% higher than the running torque.

    5. Design a spur gear drive required to transmit 45 kW at a pinion speed of 800 r.p.m.
    The velocity ratio is 3.5: 1. The teeth are 20° full-depth involute with 18 teeth on the
    pinion. Both the pinion and gear are made of steel with a maximum safe static stress
    of 180 MPa. Assume a safe stress of 40 MPa for the material of the shaft and key.

    6. Design and draw a spur gear drive transmitting 30 kW at 400 r.p.m. to another shaft
    running approximately at 100 r.p.m. The load is steady and continuous. The
    materials for the pinion and gear are cast steel and cast iron respectively. Take
    module as 10 mm. Also check the design for dynamic load and wear.
    Assume:

    Page 2 of 2

    You might also like