of scale length to a panel area. Several units can be stacked together in a single rectangular panel cut-out to facilitate adjacent comparisons and the mounting arrangement is as simple as possible. Features Instruments are available to measure A.C. Rugged taut band or D.C. current and voltage, Watts, Vars, suspension i.e. bump, shock and vibration proof Frequency, Power Factor, Speed or any other parameter that can be converted to Accuracy class 1.5 a D.C. analog signal. Dimensions comply Shock tested to 50G with ANSI C39.1 Meets all requirements of ANSI-C39.1 (1981) IP54 to BS5490/IEC529 (NEMA 3S) Description Parallax error-free platform Cases The high-torque system and large clearances dials between fixed and moving elements enhance The shatterproof polycarbonate case is a single moulding which has no joints at the their reliability and robustness which is Ambient temperature inherent in the Hi-Q taut band suspension range -10°C to +55°C panel front and the enclosure is splashproof. The materials used for case and terminal system. (14° to 131°F) plate tray are non drip self extinguishing Panel Mounting engineering thermoplastics which meet the Two simple screw clamps secure the Calibrated at 23°C U.S. Bureau of Underwriters specification instrument so that only one cut out is Dielectric: 2kV for 1 Grade SE1. Case and bezels are finished required in the panel. Panel thickness from matt black, aluminium silver is available if 0.073 inches (1.5mm) to 0.375 inches minute specified. (10mm) is acceptable. Overload: Movements Any number of units may be stacked flush x1.2 rated current or Movements are available to measure most against each other horizontally or vertically on voltage for 2 hours, electrical quantities. They are fully self- one cut-out, In this arrangement, the x10 rated current, and X2 shielding and unaffected by stray magnetic detachable side bezels which conceal the cut fields, the panel thickness or the material edge of the panel are attached only to the rated voltage for 5 used. outside faces of end units. seconds Panel space saving UL 94V2 cases Specifications Internally illuminated option Performance: Instruments comply with Ambient Temperature: Calibrated for 23°C U.S.A. specification ANSI Other values may be ABS American Bureau of C39.1 specified. Shipping approved Accuracy: Iron vane and moving Working temperature range is coil:1.5% 10°C to +55°C (14 to 131°F) (where applicable) Moving coil rectifier: 2.5% Enclosure code: IP55 dust proof and splash Overload capacity: 1.2 times rated current or proof. voltage for 2 hours. Movements: Self shielding Hi-Q taut band 10 times rated current or 60° rotation. 2 times rated voltage for Shock: Type tested to 50G 5 seconds. Panel material: No restrictions Dielectric Test: 2kV AC for 1 minute, case to terminals.
Analogue Instruments Web: www.crompton-instruments.com • Email: crompton.info@tycoelectronics.com 2002 128 Series Edgewise Meters A.C. Ammeters
Analogue Instruments Web: www.crompton-instruments.com • Email: crompton.info@tycoelectronics.com 2002 128 Series Edgewise Meters D.C. Milliammeters, Transducer and Temperature Indicators Rating Scaling Horizontal Vertical Catalogue No. Catalogue No.
D.C. Milliammeter - Suppressed Zero
1-5mA To suit 128-10RA-GM**-HL 128-10RA-GM**-VL 4-20mA To suit 128-10RA-HG**-HL 128-10RA-HG**-VL 10-50mA To suit 128-10RA-HZ**-HL 128-10RA-HZ**-VL
Tranducers Indicators (IMA D.C. Rated)
Volts To suit 128-108A-FA**-HL 128-108A-FA**-VL Amps To suit 128-109A-FA**-HL 128-109A-FA**-VL Watts To suit 128-105A-FA**-HL 128-105A-FA**-VL VArs To suit 128-106A-FA**-HL 128-106A-FA**-VL Hertz To suit 128-103A-FA**-HL 128-103A-FA**-VL Power Factor To suit 128-104A-FA**-HL 128-104A-FA**-VL Speed To suit 128-102A-FA**-HL 128-102A-FA**-VL
Temperature Indicators Thermocouple inputs J and K To suit 128-45T 128-45T
Notes 1. Only one scale, one set of figures and one legend 3. Where asterisks (**) are shown in the catalog can be supplied. number, describe scale detail. 2. Specify horizontal or vertical mounting at time of ordering.
Optional features Construction Scale Variations Option Option code Option Option code
1. Internal illumination EL 1. Spare black dial and legend plate SA
2. Anti-glare window BR 2. Black scale, white markings
and pointer SB 3. Aluminium finish to case FS (standard is black) 3. Colored index marker on scale SL
4. Other trim colors (specify) - 4. Coloured zone(s) SZ
5. Additional sealing - 5. Standard scale with non-standard
For 1-Or 2-Stage Oil Power Burners Up To 30kg/h Capacity and Intermittent Operations. Flame Detection: - Photoresistor MZ 770 S - Infrared-Flicker Detector IRD 1010 - UV Solid State Sensor UVD 970
For 1-Or 2-Stage Oil Power Burners Up To 30kg/h Capacity and Intermittent Operations. Flame Detection: - Photoresistor MZ 770 S - Infrared-Flicker Detector IRD 1010 - UV Solid State Sensor UVD 970
