Co-Ordination Chemistry
Co-Ordination Chemistry
Co-Ordination Chemistry
CHAPTER-5
COORDINATION COMPOUNDS
Charges of ligands
2. Why does NH3 take part in complex formation but not NH4+?
NH4+ ion does not take part in complex formation because
unlike NH3, the N-atom of NH4+ does not have any lone pair of electrons.
The positive charge on NH4+ gets repelled by the positively charged metal ion.
3. What is meant by unidentate or monodentate ligand? Give two examples.
A molecule or an ion which has only one donor atom to form one coordinate bond with the central
metal ion is called unidentate or monodentate ligand, e.g., Cl – and NH3.
4. What is meant by bidentate or didentate ligand? Give two examples.
A molecule or an ion which contains two donor atoms and forms two coordinate bonds with the
central metal ion is called a bidentate ligand, e.g., ethane-1,2-diamine (NH2—CH2—CH2—NH2) and
oxalate (C2O42-).
5. Define ambidentate ligand with example.
A molecule or an ion which contains two donor atoms but only one of them forms a coordinate bond
at a time with the central metal ion is called ambidentate ligand, e.g., CN– or NC– and NO2- or ONO-.
6. What is meant by chelate effect? Give an example. (OR)
What is a chelate complex? How it affects the stability of complex?
When a bidentate or a polydentate ligand contains donor atoms coordinate with the central metal ion,
a five or a six-membered ring is formed, this effect is called chelate effect. Chelating agents form more
stable complexes. Example, [PtCl2(en)].
17. When a coordination compound PtCl4.6NH3 is mixed with AgNO3, 4 moles of AgCl are
precipitated per mole of the compound. Write
(i) structural formula of the complex.
(ii) IUPAC name of the complex.
(i) [Pt(NH3)6]Cl4
(ii) hexaammineplatinum (IV) chloride
18. The compound PtCl2⋅2NH3 does not react with AgNO3, what will be its formula?
Ans: [Pt(NH3)2Cl2]
19. What is the secondary valency of [Co(en)3]3+ ? (OR) Coordination number of Co in [Co(en)3]3+ is:
Ans: 6 (en is a bidentate ligand).
20. What is the secondary valency of cobalt in [Co(en)2Cl2]+?
Ans: Six
21. How many ions are produced from the complex, [Co(NH3)6]Cl2 in solution?
[Co(NH3)6]Cl2 → [Co(NH3)6]2+ + 2Cl-
Ans: 3 ions.
22. Arrange the following complexes in the increasing order of conductivity in their solution:
[Cr(NH3)5Cl] Cl2, [Cr(NH3)3Cl3], [Cr(NH3)6] Cl3
Ans: [Cr(NH3)3Cl3] < [Cr(NH3)5Cl] Cl2 < [Cr(NH3)6] Cl3
Hint: Conductivity increases when increases number of ions.
23. Write the hybridization, geometry and magnetic character of [FeF6]3–.
Electronic configuration of Fe (Z=26) = [Ar] 3d6 4s2
Iron in [FeF6]3– is +3 oxidation state.
Electronic configuration of Fe3+ = [Ar] 3d5 4s0
Cl – is a weak field ligand. It is, therefore, unable to pair up the unpaired electrons.
Hybridization: sp3
Geometry: Tetrahedral
Magnetic property: Since two electrons are unpaired, it is paramagnetic.
The spin-only magnetic moment (μ) = √𝑛 (𝑛 + 2) = √2 (2 + 2) = √8 = 2.82 BM.
[Ni(CO)4]:
Electronic configuration of Ni (Z=28) = [Ar] 3d8 4s2
Nickel in [Ni(CO)4] is in zero oxidation state.
Electronic configuration of Ni (0) = [Ar] 3d8 4s2
Hybridization: sp3
Geometry: Tetrahedral
Magnetic property: Since absence of unpaired electrons, it is diamagnetic.
The spin-only magnetic moment (μ) = 0 BM
26. Write the hybridization and magnetic character of [Fe(CO)5]
Electronic configuration of Fe (Z=26) = [Ar] 3d6 4s2
Iron in [Fe(CO)5] is in zero oxidation state.
Electronic configuration of Fe (0) = [Ar] 3d6 4s2
[Ni(H2O)6]2+
Hybridization: d2 sp3
Geometry: Octahedral, inner orbital complex, low spin complex.
Magnetic property: Since the absence of unpaired electrons, it is diamagnetic.
33. Write the electronic configuration of Fe(III) on the basis of crystal field theory when it forms an
octahedral complex in the presence of (i) strong field ligand, and (ii) weak field ligand.
Electronic configuration of Fe (Z=26) = [Ar] 3d6 4s2
Electronic configuration of Fe 3+ = [Ar] 3d5
34. How is the crystal field splitting energy for octahedral complex (Δ0) related to that of tetrahedral
complex (Δt)?
Δt = (4/9) Δ0
35. Give the IUPAC name, oxidation state, coordination number, stereochemistry and electronic
configuration of central metal atom in terms of t2g and eg of K4[Mn(CN)6].
K4[Mn(CN)6] :
IUPAC name: Potassium hexacyanomanganate(II)
Oxidation state of Mn = +2, coordination number = 6
Stereochemistry = octahedral
Electronic configuration of Mn2+: [Ar] 3d5 4s0 = (t2g)5 (eg)0
The spin-only magnetic moment (μ) = √𝑛 (𝑛 + 2) = √1 (1 + 2) = √3= 1.73 BM.
36. What type of isomerism is shown by the complex [Cr(H2O)5Br]SO4 ?
(i) Ionisation isomerism: [Cr(H2O)5Br]SO4 and [Cr(H2O)5 (SO4)]Br
(ii) Hydrate or solvate isomerism: [Cr(H2O)5Br]SO4 and [Cr(H2O)4 (Br)( SO4)] H2O
37. Isomerism exhibited by the compounds [Co(SO4)(NH3)5]Br and [Co(Br)(NH3)5] SO4 is?
Ans: Ionisation isomerism
38. What type of isomerism is shown by the complex [Co(NH3)5 NO2] Cl2?
It exhibits both ionization and linkage isomerism.
[Co(NH3)5 (NO2)] Cl2 and [Co(NH3)5 (ONO)] Cl2 (linkage isomerism)
[Co(NH3)5 (NO2)] Cl2 and [Co(NH3)5 (Cl)] (Cl) (NO2) (ionization isomerism)
39. What type of isomerism is shown by the complex [Co(NH3)6] [Cr(CN)6]?
Co-ordination isomerism, [Co(NH3)6] [Cr(CN)6] and [Co(CN)6] [Cr(NH3)6]
40. What type of isomerism is shown by the complex [Co(en)2Cl2]2+? Name the structure of an isomer
of this complex which is optically active.
[Co(en)2Cl2]2+ shows geometrical (cis-trans) isomerism.
Cis- isomer of [Co(en)2Cl2]2+ shows optical activity. Its IUPAC name is cis-Dichloridobis(ethane-1,2-
diamine)cobalt(IV) ion
41. Write IUPAC name and draw structures of geometrical isomers of the complex [Pt(en2)Cl2].
IUPAC name of this complex is Dichloridobis(ethane-1,2-diammine)platinum(II).
cis trans
42. Out of Cis–[Pt(en)2Cl2]2+ and Trans–[Pt(en2)Cl2]2+, which one is optically active and why?
Only cis-form will have non-superimposable mirror images. Trans isomer is optically inactive as it
has mirror plane and hence symmetry.
43. Give evidence that [Co(NH3)5Cl]SO4 and [Co(NH3)5SO4]Cl are ionization isomers. (OR)
How can you show that complexes [Co(NH3)5Cl]SO4 and [Co(NH3)5SO4]Cl are ionization isomers ?
Add BaCl2 solution, [Co(NH3)5Cl]SO4 will give white precipitate due to the formation of BaSO4, but
[Co(NH3)5SO4]Cl will not react.
Add AgNO3 solution [Co(NH3)5SO4]Cl will give white precipitate due to the formation of AgCl, but
[Co(NH3)5Cl]SO4 will not react.
These isomers produce different ions in aqueous solution but have same chemical formula, therefore
they are ionization isomers.
44. Write the IUPAC name of the isomer of the following complex: [Pt(NH3)2Cl2]
cis-diamminedichloridoplatinum (II) and trans-diamminedichloridoplatinum (II)
45. How is stability of coordination compounds determined in aqueous solution?
Higher the value of stability constant, greater will be the stability.
Smaller the cation, higher charge on cation, more stable will be the complex.
Chelating agents form more stable complexes.
Stronger the ligand, more stable will be the complex.
46. Amongst the following, which complex is the most stable and why?
(i) [Fe(H2O)6]3+ (ii) [Fe(NH3)6]3+ (iii) [Fe(C2O4)3]3– (iv) [FeCl6]3–
[Fe(C2O4)3]3–, because oxalate is a bi-dentate ligand. It will form a stable chelating ring with central
metal ion.
47. Which of the following is more stable complex and why? [Co(NH3)6]3+ and [Co(en)3]3+
[Co(en)3]3+ is more stable complex because ethane-1,2-diamine is a bi-dentate ligand. It will form a
stable chelating ring with central metal ion.
48. Discuss the nature of bonding in metal carbonyls.
The metal–carbon bond in metal carbonyls have both σ and π character. The metal–carbon σ -bond is
formed by the donation of lone pair of electrons from the carbonyl carbon into a vacant orbital of the
metal. The metal–carbon π -bond is formed by the donation of a pair of electrons from a filled d-orbital
of metal into the vacant anti-bonding π -molecular orbital (π *) of carbon monoxide. The metal to ligand
bonding creates a synergic effect which strengthens the bond between CO and the metal.
49. Write the role of coordination compounds with examples in each of the following:
(i) Biological system (ii) Extraction/Metallurgy of metals
(i) In Biological System:
Haemoglobin, the red pigment of blood which acts as oxygen carrier is a complex of Fe2+ with
porphyrin.
The pigment responsible for photosynthesis, chlorophyll, is a complex of Mg2+ with porphyrin.
Vitamin B12 (Cyanocobalamine), the antipernicious anaemia factor, is a complex of cobalt.
(ii) Extraction/metallurgy of metals:
In Mond’s process, impure nickel is converted to [Ni(CO)4], which is decomposed to yield pure
nickel.
Silver and gold are extracted from their ores as cyanide complex, [Au(CN)2]- and [Ag(CN)2]-
50. What is Wilkinson catalyst? Write its use?
Rhodium complex, [RhCl(PPh3)3] (Chloro tris(triphenylphosphine)rhodium(I) is known as Wilkinson
catalyst. It is used for hydrogenation of alkenes.
51. In black and white photography, film is fixed by washing with hypo solution. Give the IUPAC
name of the soluble complex formed in the process.
In black and white photography, the film is fixed by washing with hypo solution which dissolves the
undecomposed silver bromide to form [Ag(S2O3)2]3−. IUPAC name is Dithiosulphatoargentate(I) ion.
52. Give examples for ligands used for detection and estimation of metal ions by classical and
instrumental methods.
EDTA, DMG, α-nitroso-β-naphthol, cupron.
CHAPTER 5: COORDINATION COMPOUNDS Page 12
FRANCIS XAVIER SCHOOL (CBSE) GRADE XII CHEMISTRY (2024-2025)
(ii) [Co(en)3]Cl3
4. Why is geometrical isomerism not possible in tetrahedral complexes having two different types of
unidentate ligands coordinated with the central metal ion?
Tetrahedral complexes do not show geometrical isomerism because the relative positions of the
unidentate ligands attached to the central metal atom are the same with respect to each other.
5. Explain on the basis of valence bond theory that [Ni(CN)4]2– ion with square planar structure is
diamagnetic and the [NiCl4]2– ion with tetrahedral geometry is paramagnetic.
[Ni(CN)4]2–:
Electronic configuration of Ni (Z=28) = [Ar] 3d8 4s2
Nickel in [Ni(CN)4]2– is in the +2 oxidation state.
Electronic configuration of Ni2+ = [Ar] 3d8 4s0
Cl – is a weak field ligand. It is, therefore, unable to pair up the unpaired electrons.
Hybridization: sp3
Geometry: Tetrahedral
Magnetic property: Since two electrons are unpaired, it is paramagnetic.
The spin-only magnetic moment (μ) = √𝑛 (𝑛 + 2) = √2 (2 + 2) = √8 = 2.82 BM.
6. [Fe(H2O)6]3+ is strongly paramagnetic whereas [Fe(CN)6]3– is weakly paramagnetic. Explain.
[Fe(H2O)6]3+ :
Electronic configuration of Fe (Z=26) = [Ar] 3d6 4s2
Iron in [Fe(H2O)6]3+ is +3 oxidation state.
Electronic configuration of Fe3+ = [Ar] 3d5 4s0
H2O is a weak field ligand. It is, therefore, unable to pair up the unpaired electrons.
Hybridization: sp3 d2
Geometry: Octahedral, outer orbital complex, high spin complex.
Magnetic property: Since five electrons are unpaired, it is strongly paramagnetic.
The spin-only magnetic moment (μ) = √𝑛 (𝑛 + 2) = √5 (5 + 2) = √35 = 5.92 BM.
[Fe(CN)6]3– :
Electronic configuration of Fe (Z=26) = [Ar] 3d6 4s2
Iron in [Fe(CN)6]3– is +3 oxidation state.
Electronic configuration of Fe3+ = [Ar] 3d5 4s0
Since CN- is a strong field ligand, it pair up the unpaired electrons. It has dsp2 hybridization, square
planar geometry and no unpaired electrons.
9. The hexaaqua manganese(II) ion contains five unpaired electrons while the hexacyano ion contains
only one unpaired electron. Explain using crystal field theory.
[Mn(H2O)6]2+ [Mn(CN)6]4-
Mn is in the +2 oxidation state. Mn is in the +2 oxidation state.
The electronic configuration is 3d5. The electronic configuration is 3d5.
The crystal field is octahedral. Water is a The crystal field is octahedral. Cyanide is a strong
weak field ligand. Therefore, the arrangement field ligand. Therefore, the arrangement of the
of the electrons in [Mn(H2O)6]2+ is t2g3eg2. electrons in [Mn(CN)6]4- is t2g5eg0.
Hence, hexaaquo manganese (II) ion has five While hexacyano ion has only one unpaired
unpaired electrons electron.
2-
10. The spin only magnetic moment of [MnBr4] is 5.9 BM. Predict the geometry of the complex ion.
Since coordination number of the complex is 4, it will be either tetrahedral or square planar geometry.
Its magnetic moment value is 5.9 BM so, it should contain five unpaired electrons and the hybridization
will be sp3 and geometry will be tetrahedral.
NCERT Exercises:
1. Explain the bonding in coordination compounds in terms of Werner’s postulates.
The main postulates of Werner’s theory are:
(i) In coordination compounds, metals show two types of valencies: primary and secondary.
(ii) The primary valencies are normally ionisable and are satisfied by negative ions.
(iii) The secondary valencies are non ionisable and are satisfied by neutral molecules or negative ions.
The secondary valency is equal to the coordination number and is fixed for a metal.
(iv) The ions or groups bound by secondary linkage to the metal have characteristic spatial
arrangements.
2. FeSO4 solution mixed with (NH4)2SO4 solution in 1:1 molar ratio gives the test of Fe2+ ion but
CuSO4 solution mixed with aqueous ammonia in 1:4 molar ratio does not give the test of Cu2+ ion.
Explain why.
FeSO4 solution mixed with (NH4)2SO4 solution in 1:1 molar ratio forms double salt FeSO4 . (NH4)2
SO4.6H2O which ionises in the solution to give Fe2+ ions. Hence, it gives the test of Fe2+ ions.
CuSO4 solution mixed with aqueous ammonia in 1:4 molar ratio forms a complex, with the formula
[Cu(NH3)4]SO4. The complex ion, [Cu(NH3)4]2+ does not ionise to give Cu2+ ions. Hence, it does not give
the test of Cu2+ ion.
3. Explain with two examples for each of the following: Coordination entity, ligand, coordination
number, coordination polyhedron.
Coordination Entity: A coordination entity constitutes a central metal atom or ion bonded to a fixed
number of molecules or ions (ligands), e.g., [Co(NH3) Cl3 ], [Fe(CN6)]4-.
Ligands: Ligands are the atoms, molecules or ions which donate a pair of electrons to central metal atom
or ion and form a coordinate bond with it. Example: NH3, Cl-, CN-.
Coordination Number (CN): The total number of ligand donor atoms to which the metal ion is directly
bonded is called coordination number. For example, in the complex ions, [Co(NH3)6]3+ and [Fe(C2O4)3]3–
the coordination numbers of both Co and Fe is 6.
Coordination Polyhedron: The spatial arrangement of the ligand atoms which are directly attached to the
central atom/ion is known as the coordination polyhedron. Tetrahedral, square planar, octahedral, square
pyramidal and trigonal bipyramidal are common shapes of coordination polyhedron.
4. Specify the oxidation numbers of the metals in the following coordination entities:
(i) [Co(H2O)(CN)(en)2]2+
x + (0) + (–1) + (0) =+ 2 or x = + 3
(ii) [CoBr2 (en)2] +
x + 2(–1) + 0 = + 1 or x = + 3
(iii) [PtCl4]2–
x – 4 = –2 or x = + 2
(iv) K3[Fe(CN)6]
3(1) + x + 6 (–1) = 0 or x = + 3
(v) [Cr(NH3)3Cl3]
x + 0 + 3(–1) = 0 or x = + 3
5. Using IUPAC norms, write the formulae of the following:
(i) Tetrahydroxozincate(II) - [Zn(OH)4]2–
(ii) Potassium tetrachloridopalladate(II) - K2[PdCl4]
(iii) Diamminedichloridoplatinum(II) - [Pt(NH3)2Cl2]
(iv) Potassium tetracyanidonickelate(II) - K2[Ni(CN)4]
(v) Hexaammineplatinum(IV) - [Pt(NH3)6]4+
(vi) Tetrabromidocuprate(II) - [CuBr4]2–
(vii) Pentaamminenitrito-N-cobalt(III) - [Co(NH3)5(NO2)]2+
6. Using IUPAC norms, write the systematic names of the following:
(i) [Co(NH3)6]Cl3 - Hexaamminecobalt(III) chloride
(ii) [Pt(NH3)2Cl(NH2CH3)]Cl - Diamminechlorido(methylamine)platinum(II) chloride
(iii) [Ti(H2O)6]3+ - Hexaaquatitanium(III) ion
(iv) [Co(NH3)4Cl(NO2)]Cl - Tetraamminechloridonitrito-N-cobalt(III) chloride
(v) [Mn(H2O)6]2+ - Hexaaquamanganese(II) ion
(vi) [Ni(NH3)6]Cl2 - Hexaamminenickel(II) chloride
(vii) [Co(en)3]3+ - Tris(ethane-1, 2-diamine)cobalt(III) ion
7. How many geometrical isomers are possible in the following coordination entities?
(i) [Cr(C2O4)3]3– (ii) [Co(NH3)3Cl3]
(i) Geometrical isomers are not possible.
(ii) Two geometrical isomers are possible
8. List various types of isomerism possible for coordination compounds, giving an example of each.
Solvate isomerism
(a) Structural isomerism:
(i) Linkage isomerism: This type of isomerism arises due to the presence of an ambidentate ligand in a
coordination compound. Example: [Co(NH3)5NO2]2+ and [Co(NH3)5 ONO]2+
(ii) Coordination isomerism: This type of isomerism arises due to interchange of ligands between the
cationic and anionic entities of different metal ions present in a complex. Example: [Co(NH3)6] [Cr(CN)6]
and [Cr(NH3)6] [Co(CN)6]
(iii) Ionisation isomerism: Ionisation isomerism arises when the counter ion in a complex salt is a potential
ligand and can displace a ligand which can then become the counter ion. Example: [Co(NH3)5Cl]SO4 and
[Co(NH3)5SO4] Cl
(iv) Solvate isomerism: They differ in number of solvent molecule is directly bonded to central metal ion. If
water is the solvent then this form of isomerism is known as “hydrate isomerism”. Example: [Cr(H2O)6] Cl3
and [Cr(H2O)5Cl] Cl2. H2O
(b) Stereoisomerism: Stereoisomerism is of two types:
(i) Geometrical isomerism: This type of isomerism arises in heteroleptic complexes due to difference in
geometrical arrangement of the ligand around the central metal ion. If the same kind of ligand occupy
adjacent positions, the isomer is called cis, and if these are opposite to each other, the isomer is called trans.
Example: [Pt(NH3)2Cl2]
(ii) Optical isomerism: This type of isomerism is exhibited by chiral molecules. Optical isomers are mirror
images that cannot be superimposed on one another. These are called as enantiomers and rotate the plane of
polarised light equally but in opposite directions. The isomer which rotates the plane of polarised light
towards left is called laevorotatory (l) while which rotates the plane towards right is called dextrorotatory
(d). Example: [Cr(ox)3]3-
(ii) [PtCl2(en)2]2+:
(iii) [Cr(NH3)2Cl2(en)]+:
Cis [Cr(NH3)2Cl2(en)]+
10. Draw all the isomers (geometrical and optical) of: (i) [CoCl2(en)2]+ (ii) [Co(NH3)Cl(en)2]2+
(iii) [Co(NH3)2Cl2(en)]+
11. Write all the geometrical isomers of [Pt(NH3)(Br)(Cl)(py)] and how many of these will exhibit
optical isomerism?
Aqueous copper sulphate exists as [Cu(H2O)4] SO4. The blue colour of the solution is due to
[Cu(H2O)4]2+ ions.
(i) [Cu(H2O)4]2+ + 4F- → [CuF4]2- + 4 H2O
(Blue) (green ppt)
(ii) [Cu(H2O)4]2+ + 4Cl- → [CuCl4]2- + 4 H2O
(Blue) (bright green)
13. What is the coordination entity formed when excess of aqueous KCN is added to an aqueous
solution of copper sulphate? Why is it that no precipitate of copper sulphide is obtained when
H2S(g) is passed through this solution?
[Cu(H2O)4]2+ + 4 CN- → [Cu(CN)4]2- + 4 H2O
As CN– ions are strong ligands the complex is very stable. It is not replaced by S 2– ions when H2S
gas is passed through the solution and thus no precipitate of CuS is obtained.
14. Draw figure to show the splitting of d orbitals in an octahedral crystal field.
15. What is spectrochemical series? Explain the difference between a weak field ligand and a strong
field ligand.
The arrangement of ligands in order of their increasing field strengths, i.e., increasing crystal field
splitting energy (CFSE) values is called spectrochemical series.
I– < Br– < SCN– < Cl– < S2– < F– < OH– < C2O42– < H2O< NCS– < EDTA4 – < NH3< en< CN– < CO
The ligands with a small value of CFSE (Δo) are called weak field ligands whereas those with a large
value of CFSE are called strong field ligands.
16. What is crystal field splitting energy? How does the magnitude of Δo decide the actual
configuration of d-orbitals in a coordination entity?
When ligands approach a transition metal ion, the d-orbitals split into two sets, one with lower energy
and the other with higher energy. The difference of energy between the two sets of orbitals (t2g and eg) is
called crystal field splitting energy (Δo).
(i) If Δ0 < P (pairing energy), the 4th electron enters one of the eg orbitals, and the configuration will
be t32g e1g, in case of weak field ligands and high spin complex will be formed.
(ii) If Δ0 > P, the 4th electron pairs up in one of the t2g orbitals giving the configuration t42g e0g, in
case of strong field ligands and low spin complex will be formed.
17. [Cr(NH3)6]3+ is paramagnetic while [Ni(CN)4]2– is diamagnetic. Explain why.
Formation of [Cr(NH3)6]3+ :
Electronic configuration of Cr (Z=24) = [Ar] 3d5 4s1
The oxidation state of chromium in [Cr(NH3)6]3+ ion is +3.
Electronic configuration of Cr3+ = [Ar] 3d3 4s0
Hybridization: d2sp3
Geometry: octahedral, inner orbital complex, high spin complex.
Magnetic property: paramagnetic, due to the presence of 3 unpaired electrons.
The spin-only magnetic moment (μ) = √𝑛 (𝑛 + 2) = √3 (3 + 2) = 15 = 3.82 BM.
[Ni(CN)4]2–:
Electronic configuration of Ni (Z=28) = [Ar] 3d8 4s2
Nickel in [Ni(CN)4]2– is in the +2 oxidation state.
Electronic configuration of Ni2+ = [Ar] 3d8 4s0
18. [Fe(CN)6]4– and [Fe(H2O)6]2+ are of different colours in dilute solutions. Why?
In both the complexes, Fe is in +2 oxidation state with d6 configuration. As the ligands CN- and H2O
possess different crystal field splitting energy (Δ0), they absorb different components of visible light for
d-d transition. Hence, the transmitted colours are different in dilute solutions.
19. Give the oxidation state, d orbital occupation and coordination number of the central metal ion in
the following complexes: (i) K3[Co(C2O4)3] (ii) cis-[Cr(en)2Cl2]Cl (iii) (NH4)2[CoF4] (iv)
[Mn(H2O)6]SO4
20. Write down the IUPAC name for each of the following complexes and indicate the oxidation state,
electronic configuration and coordination number. Also give stereochemistry and magnetic
moment of the complex: (i) K[Cr(H2O)2(C2O4)2].3H2O (ii) [Co(NH3)5Cl]Cl2 (iii) [CrCl3(py)3]
(iv) Cs[FeCl4]
(i) K[Cr(H2O)2(C2O4)2].3H2O:
IUPAC name: Potassium diaquadioxalatochromate(III) trihydrate
Oxidation state of Cr = +3; coordination number = 6
Stereochemistry : octahedral
Electronic configuration of Cr3+: [Ar] 3d3 4s0= (t2g)3, (eg)0
The spin-only magnetic moment (μ) = √𝑛 (𝑛 + 2) = √3 (3 + 2) = √15 = 3.82 BM.
(ii) [Co(NH3)5Cl]Cl2:
IUPAC name: Pentaamminechloridocobalt(III) chloride
Oxidation state of Co = +3, coordination number = 6
Stereochemistry = octahedral
Electronic configuration of Co3+: [Ar] 3d6 4s0 = (t2g)6, (eg)0
Magnetic moment (µ) = 0
(iii) [CrCl3(py)3] :
IUPAC name: Trichloridotripyridinechromium(III)
Oxidation state of Cr = +3, coordination number = 6
Stereochemistry : octahedral
Electronic configuration of Cr3+: [Ar] 3d3 4s0= (t2g)3, (eg)0
22. Discuss briefly giving an example in each case, the role of coordination compounds in: (i)
analytical chemistry (ii) Medicinal Chemistry
(ii) In analytical chemistry:
EDTA is used in the determination of hardness of water (estimation of Ca2+ and Mg2+).
Dimethyl glyoxime (DMG) is used in the estimation of Ni2+.
Detection of Cu2+ is based on the formation of a blue tetraammine copper (II) ion.
(iii)Medicinal Chemistry:
Cis-platin [Pt(NH3)2Cl2], is used in the treatment of cancer.
EDTA complex of calcium is used in the treatment of lead poisoning.
Excess of copper and iron present in plant/animal sytems are removed by the chelating
ligands D-penicillamine and desferrioxime B.
23. Amongst the following ions which one has the highest magnetic moment value?
(i) [Cr(H2O)6]3+ (ii) [Fe(H2O)6]2+ (iii) [Zn(H2O)6]2+
The oxidation states are: Cr (III), Fe (II) and Zn (II).
EC of Cr3+ = 3d3, unpaired electrons = 3, μ = √𝑛 (𝑛 + 2) = √3 (3 + 2) = √15= 3.83 BM.
CHAPTER 5: COORDINATION COMPOUNDS Page 26
FRANCIS XAVIER SCHOOL (CBSE) GRADE XII CHEMISTRY (2024-2025)
27. Using IUPAC norms, write the formulae for the following complexes:
(i) hexaaquachromium (III) chloride
(ii) sodium trioxalatoferrate (III)
(i) [Cr(H2O)6]Cl3
(ii) Na3[Fe(C2O4)3]
28. Write IUPAC name of the complex [Co(en)2(NO2)Cl]+. What type of structural isomerism is shown
by this complex?
Chloridobis-(ethane-1,2-diamine)nitrito-N-cobalt(III) ion. This complex shows linkage isomerism.
29. Why do compounds having similar geometry have different magnetic moment?
It is due to the presence of weak and strong ligands in complexes, if CFSE is high, the complex will
show low value of magnetic moment and vice versa, e.g., [CoF6]3– and [Co(NH3)6]3+, the former is
paramagnetic and the latter is diamagnetic.
30. CO is a stronger complexing reagent than NH3- why?
CO has empty π-orbitals which overlap with filled d-orbitals (t2g orbitals) of transition metals and
form π -bonds by back bonding. These π -interactions increase the value of crystal field stabilization
energy (Δ0). As NH3 cannot form π- bonds by back bonding, therefore, CO is stronger ligand than NH3.
31. Why is geometrical isomerism not possible in tetrahedral complexes having two different types of
unidentate ligands coordinated with the central metal ion?
Tetrahedral complexes do not show geometrical isomerism because the relative positions of the
unidentate ligands attached to the central metal atom are the same with respect to each other.
32. Draw structures of geometrical isomers of [Fe(NH3)2 (CN)4]-
33. Out of the following two coordination entities which is chiral (optically active)?
(a) Cis-[CrCl2(ox)2]3- (b) trans-[CrCl2(ox)2]3-
*****************