Tonal Modulation With Just Intonation
Tonal Modulation With Just Intonation
Tonal Modulation With Just Intonation
Background on Monophony
musical gamut of pitch resources that evolved over a period of years during Partch’s early
research into just intonation.2 The description of Monophony as a gamut instead of a scale is not
a frivolous distinction since a common misconception of Partch’s music is that it is mostly based
upon the free use of a 43-tone per octave microtonal chromatic scale, when a more appropriate
class3 space that can be selectively chosen to map a desired melodic or harmonic structure. As
Partch cautioned in his book Genesis of a Music, “music is not a fantasy of chromaticism. A
scale is a source of materials, from which chords and melodies are drawn, and in which the scale
The defining feature of Monophony is that it is not based upon equal divisions of the
octave like the common twelve-tone equal tempered chromatic scale, but rather its constituent
tones all form whole number ratios with a single generative tone, the Prime Unity, or more
specifically and preferably stated in ratio terms, 1/1.5 Most of the familiar pitch intervals that
occur in the twelve-tone equal tempered chromatic scale: the perfect fifth, perfect fourth, major
third, minor sixth, minor third, major sixth, etc., also occur within Monophony. However, unlike
their equal-tempered counterparts, the Monophonic intervals are perfectly in tune. A quick
comparison of several of these intervals in Table 1.1 will be useful to illustrate the differences
© 2006 Bradford A. Blackburn – Tonal Modulation with Just Intonation – Excerpt from Dissertation
between equal tempered intervals and their Monophonic equivalents via cents deviation.
instead of an acoustic reed organ) is used to perform the intervals in sequence beginning with
each equal tempered interval followed by its closest Monophonic equivalent, for the purpose of
providing an aural appreciation of the differences between equal tempered and Monophonic
intervals.
Musical Example 1.1 – Comparison of Equal Tempered and Monophonic Intervals (Performed
on Virtual Chromelodeon I)
© 2006 Bradford A. Blackburn – Tonal Modulation with Just Intonation – Excerpt from Dissertation
In Table 1.1, the equal tempered intervals identified by their common musical names
appear on the left, and their justly tuned Monophonic equivalents appear on the right. Cents
(rounded off to the nearest tenth of a cent in the case of the Monophonic intervals) are used for
both equal tempered intervals and Monophonic intervals as a unit of comparison.6 In the column
for “Cents Deviation” the difference between the two versions is calculated. From this, one can
see that the equal tempered perfect fifth is about two cents flatter than the Monophonic 3/2 (or
just perfect fifth), and conversely its complement the equal tempered perfect fourth is about two
cents sharper than the Monophonic 4/3 (or just perfect fourth). While these differences are not
very striking, the intonation discrepancy of equal temperament becomes more pronounced in the
case of thirds and sixths, for example when comparing the equal tempered major third with the
Monophonic 5/4 (or just major third), one notices that the equal tempered form is about fourteen
cents sharper.7 This discrepancy accounts for why triads played on a piano tuned to twelve-tone
equal temperament are never as well in tune as they can be when played on an instrument
In Monophony, ratios serve a dual role as a precise description of the intervals between
two distinct tones and as the names of specific pitches within the Monophonic fabric. Since the
tones of Monophony are derived from the Prime Unity, or 1/1, it holds true through the identity
property of multiplication that any interval “added” to or “subtracted” from 1/1 will result in a
tone whose name is the same ratio as the interval it bears in relation to 1/1.8 For example, the
interval from “G” to “D” is a perfect fifth, or 3/2 in ratio terms. Partch fixed his 1/1 pitch as a
“G” (for convenience this “G” was equivalent to the modern equal tempered “G” one and a half
octaves below “middle C,” or more precisely 98 Hz). The interval 3/2 when “added” to the tone
© 2006 Bradford A. Blackburn – Tonal Modulation with Just Intonation – Excerpt from Dissertation
1/1 results in the Monophonic tone, 3/2, a just perfect fifth higher than 1/1. The tone 3/2 is
1
In order to distinguish Partch’s term Monophony, which describes his unique system of just
intonation including all of the principles it entails, and the traditional use of the word
monophonic, used to describe a musical texture of one (or more) voices on a single line, the term
Monophony will be capitalized when it refers to Partch’s system.
2
David B. Doty defines Just Intonation as “any system of tuning in which all of the intervals can
be represented by whole-number frequency ratios, with a strongly implied preference for the
simplest ratios compatible with a given musical purpose.” (Doty, 1)
3
Aside from several isolated occurrences, the term “pitch class” will be substituted forthwith by
the term “tone” in keeping with Partch’s nomenclature.
4
Genesis, 121
5
For the purpose of clarity, the convention used in this paper will be to print ratios referring to
intervals in normal font, and ratios referring to specific tones in italics.
6
Alexander J. Ellis devised the cent as a unit of measurement for musical pitch within the
twelve-tone equal tempered tuning system. In Ellis’s system there are 1200 cents per octave, and
therefore 100 cents in a twelve-tone equal-tempered semitone. Cents are used in Table 1.1 to
provide a familiar frame of reference for musicians used to thinking in terms of twelve-tone
equal temperament.
7
Due to its evolution from Pythagorean tuning used in Western Europe during the Middle Ages,
twelve-tone equal temperament bears a close resemblance to the twelve-tone Pythagorean
chromatic scale, a scale built from successive just perfect fifths. In this scale, adjacent fourths
and fifths are perfectly in tune, a fact that reflects their classification as consonances during the
Middle Ages. On the other hand, thirds and sixths are relatively discordant, and bear a close
resemblance to their twelve-tone equal tempered descendants. For example, the Pythagorean
major third 81/64 is equal to approximately 407.8 cents, and there is only a 7.8 cent difference
between the Pythagorean major third and the twelve-tone equal tempered major third.
8
To calculate an ascending interval one must “add” the ratio of the interval to the ratio that
describes the original pitch. The process for doing this is to multiply the numerator of the
original pitch and the numerator of the interval, as well as the denominator of the original pitch
and the denominator of the interval (1/1x3/2 = 3/2; 3/2x5/4=15/8). To calculate a descending
interval, one must “subtract” by multiplying the inverse of the descending interval with the
original pitch (1/1x2/3=2/3=4/3). In order to express the product ratio in simple form (within an
octave, or more specifically, between 1/1 and 2/1) the numerator cannot be less than the
denominator, nor can it be twice the denominator. If the denominator is less than the numerator,
than double the numerator. If the numerator is more than twice the denominator than double the
denominator.
© 2006 Bradford A. Blackburn – Tonal Modulation with Just Intonation – Excerpt from Dissertation