Reg 600XL
Reg 600XL
Reg 600XL
Features
Sizes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Maximum working water pressure 300 psi
Maximum working water temperature 140°F B
Reduced pressure range (standard) 25 psi to 75 psi
Factory preset 50 psi WILKINS
Hydrostatic test pressure 300 psi
CPVC tailpiece: Max. hot water temp. 140°F @ 100 psi C 600XL
Typical Installation
Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted in accor-
dance with the latest edition of the Uniform Plumbing Code. The Model 600XL may be installed in any position. If installed in
a pit, vault or inside application, specify the “SC” sealed cage option. Multiple installations are recommend for wide demand
variations or where the desired pressure reduction is more than 4 to 1 (i.e.: 200 psi inlet reduced to 50 psi outlet). CAUTION:
Anytime a reducing valve is adjusted, a pressure gauge must be used downstream to verify correct pressure setting. Do not
bottom adjustment bolt on bell housing.
MODEL 975XL2
BACKFLOW PREVENTER PROTECTIVE
ENCLOSURE
MODEL 850XL
SHUT-OFF
DIRECTION OF FLOW
97 LKI N
5X NS
W ZU
I
L2
R
AS
OPTIONAL
SE
10
13
PRESSURE GAUGE
WILKINS
600XL
WILKINS
600XL
12" MIN.
30" MAX. OPTIONAL PRESSURE
GAUGE
DIRECTION OF FLOW
Specifications
The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consist of a low lead bronze body and bronze bell hous-
ing, shall have separate access covers for the plunger and strainer screen and shall have a bolt to adjust the downstream
pressure. The Pressure Reducing Valve shall be of the balanced piston design and shall reduce pressure in both flow and
no-flow conditions. The bronze bell housing and access caps shall be threaded to the body and shall not require the use of
ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 600XL.