Specification sheet

VEGAPULS C 21
Two-wire 4 … 20 mA/HART
Radar sensor for continuous level measurement
Technical data
Measuring range up to 15 m (49.21 ft)
Deviation ≤ 2 mm
Beam angle 8°
Measuring frequency W-band (80 GHz technology)
Output signal 4 … 20 mA/HART
Process fitting Thread G1½, 1½ NPT, R1½
Mounting connection Thread G1, 1 NPT, R1
Process pressure -1 … +3 bar (-100 … +300 kPa/-
14.5 … +43.51 psig)
Process temperature -40 … +80 °C (-40 … +176 °F)
Ambient temperature -40 … +80 °C (-40 … +176 °F)
Bluetooth standard Bluetooth 5.0
Bluetooth range typically 25 m (82 ft)
Operating voltage 12 … 35 V DC
Protection rating IP66/IP68 (3 bar, 24 h) acc. to IEC 60529,
Type 4X/6P acc. to UL 50
Application area
Materials
The VEGAPULS C 21 is the ideal radar sensor for non-contact level
measurement with high accuracy requirements in all standard applica- The wetted parts of the instrument are made of PVDF. The process seal
tions where a high degree of protection is required. is made of FKM. The connection cable is PUR insulated.
It is particularly suitable for level measurement in water treatment, in A complete overview of the available materials and seals can be found
pumping stations and rain overflow basins, for flow measurement in on our homepage under " Products" and " Configure & Order".
open channels, for level monitoring and for many other industrial areas.
The sensor is suitable both for measuring liquids and for use on small
bulk solids silos or bulk solids containers. Housing versions

The housing is optimized for applications in the water/waste water

industry and manufactured of PVDF. Due to the encapsulated cable
Your benefit
gland, protection rating IP66/IP68 (3 bar) is achieved.
• Maintenance-free operation due to non-contact 80 GHz radar tech-
nology
Electronics versions
• Exact measurement results independent of medium properties and
process conditions The instruments are available in different electronics versions. Apart
• High accuracy and universal measuring range. Maintenance-free from the two-wire electronics with 4 … 20 mA/HART, two digital ver-
operation due to non-contact measuring principle sions with SDI-12 and Modbus/Levelmaster protocol are possible.

Function Approvals

The sensor emits a continuous radar signal through the antenna. The Worldwide approvals are available for VEGA instruments, e.g. for use in
emitted signal is reflected by the medium and received as an echo by hazardous areas, on ships or in hygienic applications.
the antenna. For approved devices (e.g. with Ex approval) the technical data in the
The frequency difference between the emitted and received signal respective safety instructions are applicable.
is proportional to the distance and depends on the filling height. The You can find detailed information in the available approvals on our
determined filling height is converted into a respective output signal and homepage under " Downloads".
output as measured value.

VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com VEGAPULS C 21 - 58353-EN-230314
 Specification sheet

Adjustment Dimensions

Adjustment via the signal cable

The adjustment of the instrument is carried out via the interface adapter
VEGACONNECT and a PC with the adjustment software PACTware ø 76 mm

and corresponding DTM.

(2.99")
ø 6 ... 8 mm
(0.24 ... 0.31")

Wireless adjustment via Bluetooth 1 NPT R1

The Bluetooth version of the device enables wireless connection to

G1

29 mm
(1.14")
smartphones/tablets (iOS/Android) or Windows PCs.

108 mm
(4.25")
(0.08")
2 mm

23 mm
(0.92")
1½ NPT R 1½
G1½

1 2 3

Dimensions VEGAPULS C 21
1 Thread G1½
2 Thread 1½ NPT
Wireless connection to standard operating devices 3 Thread R1½

Operation is via a free app from the " Apple App Store", the " Goog-
le Play Store" or the " Baidu Store". Alternatively, adjustment can also
be carried out via PACTware/DTM and a Windows PC. Mounting accessories

For the VEGAPULS C 21 the suitable mounting accessories for ceiling

or wall mounting is available.

Adjustment via PACTware or app

Adjustment via remote systems
Further adjustment options are possible via a HART Communicator as
well as manufacturer-specific programs such as AMS™ or PDM.
Example mounting strap - wall mounting with adjustable sensor holder
Electrical connection You can find further information on the mounting accessory on our
homepage.

1
2 Information
3
You can find further information on the VEGA product line on our home-
page.
Wire assignment in permanently connected connection cable
In the download section of our homepage you'll find operating
1 Brown (+) to voltage supply or to the processing system
instructions, product information, industry brochures and approval
2 Blue (-) to voltage supply or to the processing system
documents as well as device and adjustment software.
3 Shielding

You can find details on electrical connection in the instrument operating

Instrument selection
instructions at www.vega.com/downloads.
On our homepage under " Products" you can select the suitable meas-
uring principle and instrument for your application.
There you will also find detailed information on the available device
versions.

Contact

You can find your personal contact person at VEGA on our homepage
under " Contact".

VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com VEGAPULS C 21 - 58353-EN-230314