Emergency Charged port: Type-C USB Front Handle 1 Emergency Charging Power: ≦5V Rear Handle 1 Fingerprint Capacity: 20pcs Lock Latch 1 Password Capacity: 20 groups Square Rod 1 Password Length: 8-12 bits Keys 2 Phantom Password Length: Total 18 bits Bag of Screws 1 Support Application: Smart Life App User Manual 1 Voltage of Low Power Reminder: 3.7V Working Voltage: 6V/4 AAA Batteries Standby Current: <30uA Working Current: <200mA Unlocked Speed: 1.5s Working Temperature: -10℃—+60℃
Ⅰ Functions: 1. USB Port: when the battery is out of power, can use a power bank to emergency charge to open the lock.
2. Fingerprint Light: It shows unlocking signal.
3. Key Hole: use mechanical key to open the
lock.
4. Fingerprint Reader: use Valid Fingerprints to
open the lock.
5. Password Unlock: input 8-12 bits password
(which you setting) to open the lock.
6. Black Button: click it to open/close normal
open mode.
7. Reset Hole: reset factory setting.
I Ⅱ Operation: Normal Functions: ● Capacity: fingerprint 20pcs, password 20groups.
● Waking up the lock by touching the keypad.
● Enter system: long click “#” to enter system.
● Exit system: click “*” to exit system.
● After long click “#” to enter system:[if there is a administrator, please verify the administrator.(the first two added fingerprints or passwords are the administrators.)]
◊ Press “1” to enter fingerprint users.
◊ Press “2” to set password users.
◊ Press “3” to restore factory setting.[now, all users will be deleted, including administrators]
◊ Press “4” to change language: Chinese/English.
◊ Press “5” to open/close normal open mode.[it can be opened by pushing down the handle(don’t need to input unlocked information), after opening normal mode]
● The password length is 8-12bits, and the phantom password length totally is 18 bits.
● “#” key is a confirmed key.
Notice: the first two added fingerprints or passwords are the administrators. ⅰAdd Fingerprint Users[if there is a administrator, please verifying the administrator.(the first two added fingerprints or passwords are the administrators.)] In the initial state, long click “#” to enter system, the lock will broadcast: “ press “1” for fingerprint entering, press “2” for
password setting, press “3” for restore factory setting, press “4” for language switch, press “5” for normally open mode
and press “*” to exit. “
Then press “1”, the lock will broadcast: “please start entering”, then put your finger to the fingerprint reader, the lock will
broadcast: “please enter again”, then please put your finger again(a same finger), totally input 6 times, and the lock will
broadcast: “ enter successfully ”.
If you need to add more fingerprint users, please press “1” to add, after entering successfully.
ⅱ Add Password Users[if there is a administrator, please verifying the administrator.(the first two added fingerprints or passwords are the administrators.)] Long click “#” to enter system, the lock will broadcast: “ please verify the administrator “, then please input administrator
information (the first two added fingerprints or passwords are the administrators.) after verify, the lock will
broadcast: “ press “1” for fingerprint entering, press “2” for password setting, press “3” for restore factory setting, press
“4” for language switch, press “5” for normally open mode and press “*” to exit. “
II Then press “2”, the lock will broadcast: “please enter the 8 to 12bits password, and end with “#” key “, then input 8-12 bits
passwords which you want to set, the lock will broadcast: “be confirmed password”, then please input the password you
setting again, the lock will broadcast: “ password set successfully“.
If you need to add more password users, please press “2” to add, after setting successfully. ⅲ Reset Factory Setting There are two ways to restore factory setting.
1. Long click “#” to enter system, the lock will broadcast: “ please verify the administrator “, then please input
administrator information (the first two added fingerprints or passwords are the administrators.) after verify,
the lock will broadcast: “ press “1” for fingerprint entering, press “2” for password setting, press “3” for restore factory
setting, press “4” for language switch, press “5” for normally open mode and press “*” to exit. “
Then press “3”, then the lock will broadcast: “factory reset “. All users information have been deleted, including the
administrators.
2. If you have forgotten administrators, please use a pin to lick the reset hole for 10s on the rear handle until hearing the
lock broadcast: “ factory reset”. the lock has been finished reset factory setting.( it only can delete all users information,
including the administrators.)
ⅳ Change Language
Long click “#” to enter system, the lock will broadcast: “ please verify the administrator “, then please input administrator
information (the first two added fingerprints or passwords are the administrators.) after verify, the lock will
broadcast: “ press “1” for fingerprint entering, press “2” for password setting, press “3” for restore factory setting, press
“4” for language switch, press “5” for normally open mode and press “*” to exit. “
Then press “4”, then the lock will broadcast: “中文/English “.
ⅴNormal Open Mode
There are two ways to open normal open mode.
1. Long click “#” to enter system, the lock will broadcast: “ please verify the administrator “, then please input
administrator information (the first two added fingerprints or passwords are the administrators.) after verify,
the lock will broadcast: “ press “1” for fingerprint entering, press “2” for password setting, press “3” for restore factory
setting, press “4” for language switch, press “5” for normally open mode and press “*” to exit. “
Then press “5”, then the lock will broadcast: “normally open mode“.
If you want to close normal open mode, you can enter system again and press “5” / or use a valid user information to open
the lock, then the lock will broadcast: “cancel normally open mode”.
2. Click two times the black button on the rear handle(if the lock is waken up, just need to click one time) to open the
III normal mode, and the lock will broadcast: “ normally open mode”.
If you want to close normal open mode, you can click two times the black button on the rear handle (if the lock is waken
up, just need to click one time) / or use a valid user information to open the lock, then the lock will broadcast: “cancel
normally open mode”.
ⅵ Replace Battery Please replace batteries in time when the lock is with low power, now you can open the lock with keys or emergency
charging with power bank to open the lock.
Ⅲ Connect the lock with App
ⅰ App Installation 1. Download and install the "Smart Life" APP from the application market or scan the QR code.
2. After installation, follow the prompts to register and log in.
ⅱ Connect the lock with smart life app:
1. Open the Bluetooth and Location of your smartphone. Then press “1#” of the lock.
2. Open smart life app, the device will automatically pop up, the device name is "F4", please add the device and modify
device name.
ⅲ Family Management
1. Family Member Click "Family" on the unlock interface and select "+" in the upper right corner of the interface to enter “Add Member”
interface. Input member’s name and his account of smart life app, then select his family role (common member or
IV administrator). Then click “save”, and he will receive your invitation.
When your family member receive your invitation, open smart life app, click “Me”→"Home Management”→Find the
family and accept the invitation, then they have been shared the lock.
After Joining, return to the main interface, and select the family name in the list on the upper left corner, then the lock
device will shown in the main interface.
V How to delete Family Member: in the main interface of the smart life app, click “ME” “Home Management” click
“Family Member Name” click “Remove Member”.
2. Enter User Information
Click "Family" on the unlock interface to enter “Family-Associated Unlocking” interface, then select your family member and enter unlocked information(fingerprint and password). You also can set valid time(the timed users).
ⅳ Temporary Unlocking Management
VI 1. Add Temporary Unlocked Password Click "Temporary" on the unlock interface to enter “Add Temporary Unlocking” interface., select “Password”. You can set
8-12 bits temporary password (also can generate randomly), then set the valid time and save it.
Also can set dynamic password ( valid time is 5 minutes), click “Obtain Password”, and share it to your family or friends
after generating.
2. Add Temporary Unlocked Mobile Phone(smart life app unlock)
Click "Temporary" on the unlock interface to enter “Add Temporary Unlocking” interface, select “ Mobile Phone”. You can set “ time-limited” or “ one-time” unlocking. Set “time-limited” unlocking, please enter users’ account of smart life app(phone number or email address), and set the valid time, then click “ send” to finish. Set “ one-time” unlocking, please enter users’ account of smart life app(phone number or email address), then click “ send” to finish. [ Notice: the valid time is 1 hour, and it just can unlock one time.]
VII Then the receiver can open his smart life app, our lock will shown on the main interface. Please open Bluetooth and
location of his mobile phone to connect the lock. Click the lock device name to enter the unlocking interface to open the
lock. There is a valid time shown on the unlocking interface. [ Notice: if you have set a one-time unlocked user, he
just can open the lock 1 time within 1 hour.]
ⅴ Manage “ More” Click "More" on the unlock interface to enter “More” interface to set more functions you need.
1. Click “Smart Scenes” to enter “scene” interface, you can open “ Family Go Home” function, also can open “ Door Lock
Alarm” function. Besides, you can custom some functions which you need. VIII 2. Open or close “Auto Lock” function.
3. Set the time of Auto Lock.
4. Set the Volume of Lock.
ⅵ Unlocking Record / Alerts
Click Doorbell Icon on the unlock interface to enter “Logs” interface to check Unlocking Records or Alerts.
IX ⅶ Restore Factory Setting
On the unlock interface, click the “edit”on the top right corner, then click” remove device”, and select ”Disconnect and
wipe data”, then click ”confirm”, the lock will broadcast: “ factory reset”. [ Notice: all users’ information will be deleted,
including the fingerprint users and password users which set on the lock.]
X Ⅲ Drilling Hole Diagram
Ⅳ Installation
ⅰ Installing lock latch(pay attention to the direction of the tongue and the door opening direction), refer to step ①. Tighten the screws of the lock latch, refer to step ②. ⅱ Steps of inserting 4 AAA Batteries: tearing out the screw in the bottom of the rear handle with a screwdriver, refer to
steps ④⑤. inserting 4 AAA Batteries, refer to step ③(pay attention to the positive and negative anodes of the battery,
prevent short out).
ⅲ Connecting the line of the front handle into the line port of the rear handle, testing it work or not by press fingerprint.
Then tear out the line, and get it through the square rod, and insert the square rod to the lock latch, refer to step ⑥.
Installing the front handle on the corresponding door hole outside the door, assemble the front handle with the rear
handle, and get the line through the rear handle, then insert it into the port on the circuit board. Adjust the place of the
handles to ensure the front handle and the rear handle in a same line, finally tightening the screws, refer to step ⑦.
