Cold milling machine W 600 DC

Technical specification
Technical specification

Cold milling machine

W 600 DC
Milling width max. 24” 600 mm
Milling depth * 1 0 – 12” 0 – 300 mm
Milling drum
Tool spacing 5/8” 15 mm
Number of tools 68
Drum diameter with tools 37” 930 mm
Engine
Manufacturer Deutz
Type BF 6 M 1013 EC
Cooling Water
Number of cylinders 6
Output 129 kW / 173 HP / 175 PS
Engine speed 2,300 min-1
Displacement 436 in3 7,140 cm3
Fuel consumption, full load 9.1 gal/h 34.5 l/h
Fuel consumption, 2/3 load 6.8 gal/h 25.6 l/h
Speeds / Gradeability
1st milling gear 0 – 49 ft/min 0 – 15 m/min
2nd milling gear 0 – 98 ft/min 0 – 30 m/min
0 – 4.7 mph 0 – 7.5 km/h
Travel gear
acc. to German regulations: 5.9
Theoretical gradeability, 1st gear 89 %
Theoretical gradeability, travel gear 15 %
Transversal inclination, max. 10 °
Ground clearance 13” 325 mm
Weights * 2 3 wheels 4 wheels
Front axle load, full tanks 9,921 lbs 4,500 daN (kg) 10,472 lbs 4,750 daN (kg)
Rear axle load, full tanks 17,306 lbs 7,850 daN (kg) 17,306 lbs 7,850 daN (kg)
Own weight 25,904 lbs 11,750 daN (kg) 26,455 lbs 12,000 daN (kg)
Operating weight, CE * 3 26,455 lbs 12,000 daN (kg) 27,073 lbs 12,280 daN (kg)
Operating weight, full tanks 27,227 lbs 12,350 daN (kg) 27,778 lbs 12,600 daN (kg)
Tyres
Type of tyres Solid rubber Solid rubber
Tyre size, front (diameter x width) 22” x 12” 560 x 305 mm 22” x 9” 560 x 230 mm
Tyre size, rear (diameter x width) 22” x 10” 560 x 255 mm 22” x 10” 560 x 255 mm
Tank capacities
Fuel tank 63 gal 240 l
Hydraulic fluid tank 19 gal 70 l
Water tank 112 gal 425 l
Electrical system 24 V
Conveyor system
Belt width 16” 400 mm
Theoretical conveyor capacity 87 yd3/h 67 m3/h
Shipping dimensions / Weights * 2
Dimensions of machine (L x W x H) 15’5” x 6’5” x 8’4” 4,700 x 1,950 x 2,550 mm
Dimensions of conveyor (L x W x H) 23’7” x 40” x 40” 7,200 x 1,000 x 1,000 mm
Weight of machine 24,251 lbs 11,000 daN (kg) 24,802 lbs 11,250 daN (kg)
Weight of conveyor 1,874 lbs 11,850 daN (kg) 1,874 lbs 11,850 daN (kg)
* 1 = The maximum milling depth may deviate from the value indicated, due to tolerances and wear.
* 2 = All weights refer to basic machine without any additional equipment.
* 3 = Weight of machine with half-full water tank, half-full fuel tank, driver (165.4 lbs / 75 kg) and tools.
2
Technical description

Dimensions in
American standard
and mm
19’8” max. 6000

16”
13’11” 4250

410
10’12” 3350

44” 1110 8’2” 2490

17’5” 5300 14’12” 4560

4’6” 1360 32’4” 9860

25°
16” 400
34” 880

26” 650

20°

0
9” 235

20
R

36” 920
8”

Basic design An optimum arrangement of the individ- wheel can be individually adjusted to
ual components ensures easy access for meet each operator’s personal needs.
The W 600 DC is a road milling machine
maintenance and servicing. The control elements are located within
with mechanically driven milling drum
easy reach and within the driver’s field of
and conveyor system. The machine is
Operator’s platform vision. The most commonly used con-
equipped with permanent all-wheel drive
trols are integrated into the armrest to-
as a standard feature.
The operator’s platform is located at the gether with the advance drive lever.
rear of the machine. The comfortable sit-
Chassis
ting position combined with ergonomi- Power unit
Robust welded construction with mounts cally arranged operating elements allows
for the individual function modules. The the driver to operate the machine without The machine is driven by a powerful six-
tanks for diesel fuel, hydraulic fluid and fatiguing and ensures a clear overview of cylinder diesel engine. An integrated
water are integrated into the chassis. the machine. The seat and steering cooling system and heavy-duty fan en-

3
 the operating personnel and the environ- individually and designed as sup-
ment against any nuisance due to noise. porting wheels. The right-hand rear
wheel can be manually swivelled in
Milling drum drive front of the milling drum to improve
The milling drum is driven mechanically the side clearance, for instance when
by the diesel engine via a mechanical working along kerbs.
clutch, angular transmission and power
belts acting on the drum gearbox. The Travel drive
power belts ensure optimum transmis- The cold milling machine W 600 DC
sion of the power, damp any impacts has three (optionally four) separately
and protect the other units against over- driven wheels. The travel drive mo-
loading. Constant tension of the power tors are fed by two common hydraulic
belts is automatically maintained by a variable displacement pumps.
hydraulic cylinder. The travel speed can be infinitely var-
ied from zero to maximum speed in
Milling drum both milling gears and in travel gear.
8’4” 2550

The milling drum is located between the A hydraulic flow divider acts as differ-
rear wheels and operates in up-milling ential gear ensuring uniform traction.
direction. Toolholders accommodating The traction effort is uniformly distrib-
the point-attack cutting tools are welded uted when the lock is activated and,
onto the drum body. An optimum briefly, also when reversing.
arrangement of the cutting tools ensures
38” 960 the smooth operation of the machine. Steering
Special edge segments ensure a clean
The machine has a finger-light hy-
sharp cut at the edges.
draulic steering system. Extremely
As an option, the milling drum can be
tight locking angles allow exceeding-
equipped with the patented and estab-
ly small turning clearance circles.
lished quick-change toolholder system
HT11. With this system, the bottom parts
of the toolholders are welded onto the Brake system
drum body and the upper parts secured
30°

Braking is achieved by the self-lock-

to the bottom parts by retaining bolts to ing hydrostatic transmission. The
allow quick replacement, thus minimiz- road milling machine is additionally
4’9” 1465

6’1” 1840

ing any downtimes. equipped with an automatic spring-

Due to its special bearing system, the loaded braking system in the travel
complete milling drum can be pulled out drive gearboxes of both rear wheels.
to the side. Drums with milling widths of
12” (300 mm), 16” (400 mm), 20” (500 mm) Loading the milled material
and 24” (600 mm) are available for various
16” 406

24” 610

applications. Replacement of the drums is Clean loading of the milled material is

facilitated by a mounting device and drum ensured by means of a scraper
carriage which are available as an equip- blade. Carbide segments on the
°

edges of the scraper blade ensure a

70

ment option. Other milling drums of vari-

ous widths and shapes are available for long service life.
special applications. Customized versions The scraper blade can be locked at
can be produced upon request. the required height with variable con-
tact pressure when milling right down
Cutting tool replacement to the gravel course. In addition, it
sure trouble-free operation even at high can also be adjusted so that the
outside temperatures. The engine com- The scraper blade opens hydraulically milled trench can be refilled or part of
plies with the stringent requirements of and the side plates can be locked in the the reclaimed material loaded on
the exhaust emission standards stipu- upper position to permit easy access to trucks.
lated by the US Environmental Protec- the milling drum for the replacement of The milled material is picked up by
tion Agency (EPA, Tier II) and the EU cutting tools. The power belts can be the integrated conveyor in the milling
(Stage II). All maintenance work can be slackened manually so that the drum chamber and transferred to trucks via
carried out from one machine side. turns effortlessly, thus facilitating the tool a wide conveyor system. By means
replacement. of a special coupling device, the con-
Soundproofing veyor can be mounted and dis-
Drive unit
mounted quickly without the driver
Noise levels are reduced by the standard The machine is steered via the front having to leave the operator’s plat-
soundproofing which also protects both wheel. The rear wheels are suspended form for this purpose.

4
The loading conveyor can be adjusted in a wire-rope sensor and the height ad- an electrically operated water spray
height and slewed to both sides. The justed automatically. system which also cools the cutting
material is transported reliably and safe- tools, thus considerably extending
ly by the V-ribbed belt. Hydraulic system their service life. The spray nozzles
The loading conveyor is covered to pre- are easily removed for cleaning.
The hydraulic systems for travel drive,
vent clouds of dust being blown away by
loading conveyor and setting functions
the wind and causing a nuisance. Filling
are mutually independent. The hydrau-
lic pumps are driven by the diesel en- Water is filled via a C-pipe connec-
Milling depth adjustment and auto-
gine via a power take-off, thus permit- tion or a large filling port. Diesel fuel
matic levelling system
ting a highly compact design. The oil in is filled via a large filling port.
The milling depth is set via the hydraulic the system is cleaned by return-flow
height adjustment of the rear drive units. and suction filters. It is cooled by the hy-
Safety features
The drive units can be conveniently ad- draulic fluid cooler integrated at the
justed independently of one another diesel engine. The cold milling machine can be se-
from the driver’s seat, where the set val- curely lashed onto a low-bed trailer or
ues can be monitored on separate height Electrical system loaded by crane (cross-beam) with
indicators, even with the supporting the aid of the lashing lugs perma-
24 V electrical system with starter, 3-phase
wheel swivelled in front of the drum. This nently attached to the machine. A
alternator and two 12 V / 88 Ah batteries,
feature permits the simple and accurate powerful horn, easily accessible
as well as a socket outlet (24 V).
production of wedged cuts. emergency stop button and exten-
The automatic levelling system from sive working and safety lights ensure
Water spray system
Wirtgen can be installed as an equip- that the machine can be operated
ment option. With this system, a refer- The formation of dust clouds during the safely, even in darkness or inclement
ence plane is scanned, for example, by milling operation is largely prevented by weather.

Special equipment: 4-wheel design

Dimensions in American standard and mm 8’3” 2520

30°
25°

4’9” 1465
1075

6’1” 1840
42”
20°

0
34” 880

16” 400
26” 650

65

36”
R

920
16” 406
”
9” 235

4” 115
26

°
70

Special equipment: Folding conveyor

Dimensions in American standard and mm
9’10” 3000

27’1” 8245

5
 Standard Option
Cold milling machine
Equipment W 600 DC WIRTGEN AMERICA
Frame / Operator’s platform
Footwell heating Wirtgen America Inc.
Canopy, manually retractable 6030 Dana Way

Illustrations are without obligation. Subject to technical changes. Performance data depend on operational conditions. – No. 07-20 AM- 06/05 © by Wirtgen GmbH 2005 Printed in Germany
Special painting Nashville, TN 37013, USA
Transport Phone: (615) 501- 0600
Loading and lashing lugs Fax: (615) 501- 0691
Towing device Internet: www.wirtgenamerica.com
Road traffic licence
Exterior rear view mirror, right
Machine control and levelling system
Automatic levelling system with
wire-rope sensor right / left
Automatic levelling system with slope control sensor
Drive unit / Wheels
All-wheel drive and switchable differential lock
4-wheel design with front axle
Milling drum assembly
Hydraulically lifting side plates
Milling drum with milling width 12” (300 mm),
centrally positioned (milling depth 10” (250 mm))
Milling drum with milling width 16” (400 mm)
(milling depth 12” (300 mm))
Milling drum with milling width 20” (500 mm)
(milling depth 12” (300 mm))
Quick-change toolholder system HT11
Mounting device for milling drum replacement
Drum carriage for milling drum replacement
Loading the milled material
Loading conveyor with quick-release coupling
Adjustable conveyor belt speed
Folding conveyor
Non-supply of conveyor system
Miscellaneous
Comprehensive tool kit
Working lights
Warning beacon
Safety certificate by the
Employer’s Liability Insurance Association
Comprehensive safety package with
emergency stop button
Reversing horn
Soundproofing
Hydraulic hammer
Hydraulic power take-off for ancillary equipment
Operation of the cold milling machine
with organic hydraulic fluid