DELTA ELEKTRONIKA B.V. Vissersdijk 4, 4301 ND www.DeltaPowerSupplies.

com
DC POWER SUPPLIES Zierikzee, the Netherlands Tel. +31 111 413656

SM3300 - Series 3300W DC POWER SUPPLIES

One or Three phase input

Models Voltage range Current range

SM 18-220 0 - 18 V 0 - 220 A
SM 66-AR-110 0 - 33 V 0 - 110 A
Autoranging output 0 - 66 V 0 - 55 A
SM 100-AR-75 0 - 50 V 0 - 75 A
Autoranging output 0 - 100 V 0 – 37.5 A
SM 330-AR-22 0 - 165 V 0 - 22 A
Autoranging output 0 - 330 V 0 - 11 A
SM660-AR-11 0 - 330 V 0 - 11 A
Autoranging output 0 - 660 V 0 – 5.5 A

Features Functionalities

• Designed for long life at full power • Operation on single and three phase input voltages

• Excellent dynamic response to load changes • Standard Ethernet interface

• Protected against all overload and short circuit conditions • Large user display, menu driven operations

• EMC surpasses CE requirements: • Durable digital encoders for voltage and current adjustment
low emission & high immunity
• Plug and play optional interfaces
• Low audible noise: fan is temperature controlled

• Available Options : Software control and Interfaces,

High Speed Programming, Two-Quadrant Output - PowerSink
SPECIFICATIONS SM3300

SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11

DC Power terminals
voltage 0 - 18 V 0 - 66 V 0 - 100 V 0 - 330 V 0-660V
current 0 - 220 A 0 - 110 A 0 - 75 A 0 - 22 A 0-11 A
AC Input
1 or 3 phase, 48 - 62 Hz 180-528 V 180-528 V 180-528 V 180-528 V 180-528 V
rated voltage range 200 - 480 V 200 - 480 V 200 - 480 V 200 - 480 V 200 - 480 V
rated frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
rated current Max. 16 A Max. 16 A Max. 16 A Max. 16 A Max. 16 A

current (400 V / 3 ph, 3300W) 5.8 A 5.6 A 5.6 A 5.6 A 5.6 A

power factor, 3300W, 1750W 0.94, 0.92 0.94, 0.92 0.94, 0.92 0.94, 0.92 0.94, 0.92

Power Derating vs input

Single phase:
230 V : Pout max (W), Iin (A) 3050, 16 3100, 16 3100, 16 3200, 16 3200, 16
205 V : Pout max (W), Iin (A) 2650, 16 2700, 16 2700, 16 2800, 16 2800, 16
180 V : Pout max (W), Iin (A) 2300, 16 2400, 16 2400, 16 2400, 16 2400, 16

Three phase
190 V : Pout max (W), Iin (A) 3300, 12.5 3300, 12.5 3300, 12.5 3300, 12.5 3300, 12.5
180 V : Pout max (W), Iin (A) 3100, 12.5 3100, 12.5 3100, 12.5 3100, 12.5 3100, 12.5

power factor single phase 0.99 0.99 0.99 0.99 0.99

internal fuses 20 AT 20 AT 20 AT 20 AT 20 AT
standby input power (Vo=Io=0) 30 W 30 W 30 W 30 W 30 W
standby input power (Vo=Vmax) 60 W 50 W 50 W 50 W 60 W
Efficiency 89 % 90 % 90 % 91 % 92 %
400 V AC, 3 ph input, full load
Regulation
Load 0 - 100% CV 2.5 mV 5 mV 5 mV 5 mV 5 mV
Line 180 - 528 V AC CV 0.2 mV 1 mV 1 mV 3 mV 4 mV
(external voltage sense)
Load 0 - 100% CC 12 mA 6 mA 2 mA 1.2 mA 1.2 mA
Line 180 - 528 V AC CC 3 mA 1 mA 0.5 mA 0.2 mA 0.2 mA
(internal voltage sense,
after warm up)
33 / 66V 50 / 100 V 165 / 330 V 330 / 660 V
Ripple + noise
rms (BW=300 kHz) CV 3 mV 7 mV 7 mV 10 mV 15 mV
p-p (BW=20 MHz) CV 12 mV 18 mV 22 mV 50 mV 120 mV

rms (BW=300 kHz) CC

p-p (BW=20 MHz) CC 50 mA 15 / 7.5 mA 6 / 2 mA 4.5 / 1.5 mA 1.8 / 0.6 mA
CC-ripple at full load 250 mA 90 / 45 mA 60 / 20 mA 24 / 8 mA 7.5 / 2.5 mA
Programming & monitoring
accuracy (excluding INT MOD ANA)
Voltage ± 0.1% ± 0.1% ± 0.1% ± 0.1% ± 0.1%
Current ± 0.18% ± 0.25% ± 0.25% ± 0.15% ± 0.15%
Temp. coeff., per °C 1 CV 35.10-6
CC 60.10-6
Stability 1 after 1 hr warm-up
during 8 hrs CV
CC 6.10-5
tamb = 25 ± 1 °C, Vin = 400 VAC 9.10-5
(internal voltage sensing for CC-stab.)

Programming speed 2 SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11

Standard Version (resistive load)
Rise time (10 - 90%)
output voltage step 0 → 15 / 18 V 0 → 33 V 0 → 50V 0 → 165 V 0 → 330 V
time, (load = 3300W) 4 / 5.5 ms 1.6 ms 3.6 ms 3.8 ms 4.2 ms
time, (load = 330 W) 2.2 / 2.6 ms 1 ms 2 ms 2 ms 2.5 ms
output voltage step - 0 → 66 V 0 → 100 V 0 → 330 V 0 → 660 V
time, (load = 3300W) - 7 ms 15 ms 15 ms 15 ms
time, (load = 330 W) - 3.7 ms 8 ms 8 ms 7.5 ms
Fall time (90 - 10%)
output voltage step 15 / 18 V → 0 V 33 V → 0 V 50 V → 0 V 165 V → 0 V 330 V → 0 V
time, (load = 3300W) 6 / 8 ms 3 ms 6 ms 6 ms 6 ms
time, (load = 330 W) 52 / 75 ms 33 ms 65 ms 65 ms 70 ms
output voltage step - 66 V → 0 V 100 V → 0 V 330 V → 0 V 660 V → 0 V
time, (load = 3300W) - 11 ms 26 ms 25 ms 28 ms
time, (load = 330 W) - 100 ms 260 ms 250 ms 270 ms

Notes: 1. Measured at full load. 2. Signal latency depends on the interface used & data traffic. 3. See "Safety instructions" 4. With optional Interface.

2/6 DELTA ELEKTRONIKA B.V. rev. June 2023

SPECIFICATIONS SM3300

Programming speed 2 SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11

High Speed Version (resistive load) Option P300 Option P302 Option P303 Option P304 Option P305
Rise time (10 - 90%)
output voltage step 0 → 15 / 18 V 0 → 33 V 0 → 50V 0 → 165 V 0 → 330 V
time, (load = 3300W) 0.17 / 0.24 ms 0.34 ms 0.46 ms 0.38 ms 0.8 ms
time, (load = 330 W) 0.13 / 0.15 ms 0.33 ms 0.46 ms 0.35 ms 0.7 ms
output voltage step - 0 → 66 V 0 → 100 V 0 → 330 V 0 → 660 V
time, (load = 3300W) - 0.44 ms 0.53 ms 1.6 ms 2.8 ms
time, (load = 330 W) - 0.35 ms 0.47 ms 0.8 ms 2.0 ms

Ripple @ full load

Typical (rms / pp) 15 mV / 50 mV 25 mV / 70 mV 35 mV / 120 mV 50 mV / 120 mV 60 mV / 250 mV

Output Capacitance (typical) 750 µF 315 µF 95 µF 31 µF 15 µF

Fall time (90 - 10%)
output voltage step 15 / 18 V → 0 V 33 V → 0 V 50 V → 0 V 165 V → 0 V 330 V → 0 V
time, (load = 3300W) 0.19 / 0.27 ms 0.34 ms 0.42 ms 0.45 ms 0.82 ms
time, (load = 330 W) 0.52 / 0.75 ms 1.6 ms 1.4 ms 4.3 ms 8 ms
output voltage step - 66 V → 0 V 100 V → 0 V 330 V → 0 V 660 V → 0 V
time, (load = 3300W) - 0.58 ms 0.53 ms 2.1 ms 3.4 ms
time, (load = 330 W) - 5.7 ms 5 ms 17 ms 30 ms

SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11

Recovery time range 33 V / 66 V 50 V / 100 V 165 V / 330 V 330 V / 660 V
recovery within 50 mV 100 mV 100 mV 500 mV 800 / 500 mV
di/dt of load step 2.7 A/µs 1.7 / 0.7 A/µs 1.1 / 0.5 A/µs 0.35 / 0.17 A/µs 0.16 / 0.08 A/µs
output voltage 15V 30V / 60V 45V / 90V 150 / 300 V 300 / 600 V
time, @ 50 - 100% load step 100 µs 100 µs 100 µs 100 µs 100 µs
max. deviation 250 mV 260 / 180 mV 180 / 80 mV 1.8 / 1.4 V 2.2 / 1.8 V
Output impedance
CV, 0-1 kHz < 0.8 mΩ < 3 mΩ < 1.8 mΩ < 30 mΩ < 60 mΩ
CV, 1-100 kHz < 12 mΩ < 25 mΩ < 18 mΩ < 250 mΩ < 600 mΩ
Pulsating load
max. tolerable AC component
of load current
f > 1 kHz 25 Arms 20 Arms 11 Arms t.b.d. t.b.d.
f < 1 kHz 220 Apeak 110 Apeak 75 Apeak 22 Apeak 11 Apeak

Insulation
AC power terminals / DC power term. 3750 Vrms (1min.) 3750 Vrms (1min.) 3750 Vrms (1min.)
creepage / clearance 8 mm 8 mm 8 mm
AC power terminals / case 2500 Vrms 2500 Vrms 2500 Vrms
DC power terminals / case 1000 V DC 3 1330 V DC 3 1400 V DC 3
Safety cTUVus / EN 60950 / EN 61010
EMC Emission EN 61326-1, class B equipment (for use in domestic establishments)
Immunity EN 61326-1, equipment for use in industrial and domestic establishments
Operating Temperature at full load – 20 to + 50 °C
derate output to 75% at 60 °C
Humidity maximum 95% RH, non condensing, up to 40 °C
maximum 75% RH, non condensing, up to 50 °C
Storage temperature – 40 to + 85 °C
Thermal protection output shuts down in case of insufficient cooling
MTBF 500 000 hrs

SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11

Hold-Up time (@ 400 VAC input)
Vout = 100%, Pout = 3300 W 6 ms 12 ms 12 ms 12 ms 12 ms
Iout = 100%, Pout = 3300 W 13 ms 13 ms 13 ms 13 ms 13 ms
Vout = 100%, Pout = 1750 W 18 ms 24 ms 24 ms 24 ms 24 ms
Turn on delay
after mains switch on 1.4 s
Inrush current 15 A

Notes: 1. Measured at full load. 2. Signal latency depends on the interface used & data traffic. 3. See "Safety instructions" 4. With optional Interface. For
details see ‘Datasheet Interfaces SM3300 series’.

3/6 DELTA ELEKTRONIKA B.V. rev. June 2023

SPECIFICATIONS SM3300

SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11

Series operation
max. total voltage 1000 V 3 1000 V 3 1000 V 3 1330 V 3 1330 V 3
Master / Slave operation 4 yes yes yes yes yes
Parallel operation
Normal no limit
Master / Slave operation 4 maximum 8 units
Remote sensing
max. voltage drop per load lead 2V
Limits Voltage adjust range 0 - 101 %
Current adjust range 0 - 101 %
Potentiometers
front panel control with knobs
resolution 15 bits
Meters 4 digit 4 digit 4 digit 4 digit 4 digit
scale voltage 0.00 - 18.00 V 0.00 - 66.00 V 0.0 – 100.0 V 0.0 - 330.0 V 0.0 - 660.0 V
scale current 0.0 - 220.0 A 0.0 - 110.0 A 0.00 - 75.00 A 0.00 - 22.00 A 0.00 - 11.00 A
accuracy read output 0.2% + 2 digit 0.2% + 2 digit 0.2% + 2 digit 0.2% + 2 digit 0.2% + 2 digit
read limit setting 0.3% + 2 digit 0.3% + 2 digit 0.3% + 2 digit 0.3% + 2 digit 0.3% + 2 digit

Mounting stacking of units allowed, air flow is from left to right

AC Terminals (CON D) screw terminals for wire 2.5 - 4 mm2, 3 phase + earth (no neutral)
DC Terminals (CON B1 & B2) M8 bolts
Programming connectors (LAN) standard with RJ45-connector for Ethernet at rear panel, 100 Mb/s, full-duplex
Interlock (CON A) input for contact at rear panel
Cooling low noise blower, fan speed adapts to temperature of internal system
audio noise level ca. 50 dBA at full load, 25 °C ambient temperature, 1 m distance
ca. 57 dBA at full load, 50 °C ambient temperature, 1 m distance
air flow From left to right
Enclosure degree of protection IP20
Dimensions
front panel: h x w 88.1 x 483 mm (19", 2 U)
behind front panel: h x w x d 86 x 448 x 455 mm (excluding feet)
with optional interfaces the required depth is 500…530mm
Weight 15 kg

CV = Constant Voltage
CC = Constant Current

Specifications measured at
tamb = 25 ± 5 °C and Vin = 400 VAC,
50 Hz unless otherwise noted.

The information in this document is

subject to change without notice.

Notes:
1. Measured at full load.
2. Signal latency depends on the
interface used and data traffic.
3. See safety Instructions in the
operating manual.
4. With optional ‘plug and play’ interface. For
details see ‘Datasheet Interfaces SM3300
series’.

4/6 DELTA ELEKTRONIKA B.V. rev. June 2023

SPECIFICATIONS SM3300

Typical Applications

• Solar inverter testing, PV-Simulation • Automotive battery simulations • Driving PWM-Controlled DC motors

• Car testing systems • Controlled battery (dis)charging • Accurate current sources

• ATE in industrial production lines • Lasers • Aerospace and military equipment

• Plasma chambers • Sustainable energy

Standard Features

Digital CV- and CC- Ethernet Interface Sequencer

Settings

Reliable, long-life digital Ethernet interface for Arbitrary Waveform

encoders are implemented programming and monitoring generator or standalone
at the front panel. Includes automation.
total front panel lock (also for CV- / CC-knobs)
and a coarse or fine pitch adjustment
depending on the turning speed.

High Voltage Isolation USB-Input

A high DC output isolation Not yet available:

allows floating operation up to Front and rear panel USB-Input
1000 V for SM18-220, for exchange of settings and
SM66-AR-110 and SM100-AR-75, and up to waveforms (Host / Type-A).
1330V and 1400 V for SM330-AR-22 and
SM660-AR-11.

Options

Software control and High Speed Two-Quadrant

Interfaces Programming Output Power Sink

Field installable interfaces: A 10 to 20 times higher Two quadrant operation

programming speed (down to maintains the DC output
0.2ms rise time at full load) voltage constant regardless
- Master / Slave controller and lower output capacitance. Excellent for the output power is positive or negative. Ideal
- Isolated Contacts laser applications, test systems or as current for PWM-speed controlled DC-Motors and
- Serial controller with multiple protocols: source with low parallel capacitance as used ATE systems.
RS 232, RS 485, RS 422 and USB (Device) in plasma chambers.
- Digital I/O
- Isolated Analog Programming
- Simulation interface

Order Codes : Order Codes : Order Codes :

• INT MOD M/S • SM 18-220 – P300 • SM 18-220 – P306
• INT MOD CON • SM 66-AR-110 – P302 • SM 66-AR-110 – P308
• INT MOD SER • SM 100-AR-75 – P303 • SM 100-AR-75 – P309
• INT MOD DIG • SM 330-AR-22 – P304 • SM 330-AR-22 – P310
• INT MOD ANA • SM 660-AR-11 – P305 • SM 660-AR-11 – P311
• INT MOD SIM

5/6 DELTA ELEKTRONIKA B.V. rev. June 2023

SPECIFICATIONS SM3300

Optional Interfaces (4pcs) NO Line Cord supplied

Isolated Analog, RS485 / RS422 / RS232, USB, AC Mains Connector

Digital I/O, Isolated Contacts and M/S-2 Controller. (contra-plug supplied)

InterLock Sense Block

Ethernet (standard) DC Power Terminals Feet are not mounted

but included in packing

Safety Covers supplied for in- and output (not shown)

6/6 DELTA ELEKTRONIKA B.V. rev. June 2023