ECP3771T 4 InfoPacket
ECP3771T 4 InfoPacket
ECP3771T 4 InfoPacket
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
3/15/2024 10:20:24 AM
CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
Page 4 of 12
CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
Nameplate
NP3257
CAT.NO. ECP3771T-4
SPEC. 07K374Y826G2
HP 10 TE
VOLTS 460
AMP 11
RPM 3500
FRAME 215T HZ 60 PH 3
SER.F. 1.15 CODE H DES B CL F
RATING 40C AMB-CONT
SN
DE 6307 ODE 6307
NEMA-NOM-EFF 92.4 PF 90
G.MIN.EFF 91.0 CC 010A
T. CODE T3C T= 160
NP3260
SPEC. 07K374Y826G2
D.E. BRG. 35BC03XP30X
O.D.E. BRG. 35BC03XP30X
GREASE POLYREX EM
RPM MAX 5400 MAX. KVAR N/A
BLANK
INV.TYPE PWM
T= 160
C HP FR 60 C HP TO 90
CT HZ FROM 6 CT HZ TO 60
VT HZ FROM 3 VT HZ TO 60
Page 5 of 12
HTR-VOLTS HTR-AMPS
HTR-WATTS MAX. SPACE HEATER TEMP.
NEMA-NOM-EFF 92.4 PF 90
G.MIN.EFF 91.0 CC 010A
T. CODE T3C T= CUSTOMER INFORMATION PACKET
160 ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
NP3260
SPEC. 07K374Y826G2
D.E. BRG. 35BC03XP30X
O.D.E. BRG. 35BC03XP30X
GREASE POLYREX EM
RPM MAX 5400 MAX. KVAR N/A
BLANK
INV.TYPE PWM
T= 160
C HP FR 60 C HP TO 90
CT HZ FROM 6 CT HZ TO 60
VT HZ FROM 3 VT HZ TO 60
HTR-VOLTS HTR-AMPS
HTR-WATTS MAX. SPACE HEATER TEMP.
Page 6 of 12
CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
Parts list
Page 8 of 12
CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
460 V, 60 Hz:
Nameplate Data
Single Voltage Motor
Rated Output (HP) 10 Full Load Torque 14.9 LB-FT
Volts 460 Start Configuration direct on line
Full Load Amps 11 Breakdown Torque 70.8 LB-FT
R.P.M. 3500 Pull-up Torque 24.2 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 32.6 LB-FT
NEMA Design Code B KVA Code H Starting Current 88.5 A
Service Factor (S.F.) 1.15 No-load Current 3.61 A
NEMA Nom. Eff. 92.4 Power Factor 90 Line-line Res. @ 25ºC 0.745 Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 40°C
S.F. Amps Temp. Rise @ S.F. Load 50°C
Locked-rotor Power Factor 30.1
Rotor inertia 0.383 LB-FT2
Page 9 of 12
CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
95 38 3,590 19 19
90 36 3,580 18 18
85 34 3,570 17 17
80 32 3,560 16 16
75 30 3,550 15 15
70 28 3,540 14 14
65 26 3,530 13 13
60 24 3,520 12 12
55 22 3,510 11 11
50 20 3,500 10 10
45 18 3,490 9 9
40 16 3,480 8 8
35 14 3,470 7 7
30 12 3,460 6 6
25 10 3,450 5 5
20 8 3,440 4 4
15 6 3,430 3 3
10 4 3,420 2 2
5 2 3,410 1 1
0 0 3,400 0 0
0 25 50 75 100 125 150
3/15/2024 ACPERF, record # 47087 PERCENT OF RATED OUTPUT (10 HP)
Page 10 of 12
CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
8 7 6 5 4 3 2 1
07LYK374
8.87 5.75
9.11 3.88
AUXILIARY NP 3.38
PLUG (WHEN REQ'D) 2.04
C C
12.19 5.74
.31 KEY
2.38 LONG
1.3750
1.3745
5.25
5.19
FORSHEDA LEAD
B SLINGER HOLE B
1.00 N.P.T.
8 HOLES
GROUND DRAIN
Ø.41
SLINGER LUG FITTING 4.25 4.25
8.13
A A
07LYK374
CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT THE PRODUCT WILL PERFORM SUITABLY IN THE INTENDED APPLICATION
BALDOR - RELIANCE
REV. DESC: CONVERT AUTOCAD DRAWING TO SWD ®
REV: G VERSION: 07 REVISED: 11:34:04 11/21/2022 TDR: 000001199231
MODEL NO. 07LYK374 REF: -
STD HORZ 213-5T TEFC M CP W/6307 BRGS, LIPPED KOBX LID
BY: ENALEM0 B
8 7 6 5 4 3 2 1