C 20 ISE 1 2 Sem

Diploma in Information Science & Engineering 2020-21 C20
Vision
[(To be drafted individually at institution level)]
To build a strong learning environment in the field of Information Science and Engineering that
responds to the challenges of the century
Mission
(To be drafted individually at institution level)
M1: To produce Information science diploma graduates who are trained in design, implementation,
testing and maintenance of computational systems through competitive curriculum in
collaboration with industry and other organizations.
M2: Providing state of art facilities for enhancing skills in the field of computer science and
engineering.
M3:To encourage ethical values and leadership abilities in the minds of students so as to work
towards the growth of the society.
Programme Educational Objectives (PEOs)

(After 2/3 years of graduation, the students will have the ability to)
1. Attainment of key principles and practices of computation and basic principles of engineering to
ensure that technicians are able to apply their software development skills to implement
practical systems consisting of software and/or hardware components.
2. Get hands on domain knowledge to pursue higher education.
3. Become socially responsible technicians with good leadership qualities, ethical values and
effective interpersonal skills.
PROGRAM OUTCOMES (POs)
1. Basic and Discipline specific knowledge: Apply knowledge of basic mathematics, science and
engineering fundamentals and engineering specialization to solve the engineering problems.
2. Problem analysis: Identify and analyze well-defined engineering problems using codified
standard methods.
3. Design/ development of solutions: Design solutions for well-defined technical problems and
assist with the design of systems components or processes to meet specified needs.
4. Engineering Tools, Experimentation and Testing: Apply modern engineering tools and
appropriate technique to conduct standard tests and measurements.
5. Engineering practices for society, sustainability and environment: Apply appropriate
technology in context of society, sustainability, environment and ethical practices.
6. Project Management: Use engineering management principles individually, as a team member
or a leader to manage projects and effectively communicate about well-defined engineering
activities.
7. Life-long learning: Ability to analyze individual needs and engage in updating in the context of
technological changes.
Department of Collegiate & Technical Education Bengaluru-560001 Page 2

CONSISTENCY MATRIX OF PEO’S WITH MISSION
Environmental
Societal Needs
Self-Learning
Team Spirit
Leadership
Learning
Qualities
Industry
Adapt to
Concern
Higher
PEO statements
Attainment of key principles and practices of

computation and basic principles of
engineering to ensure that technicians are
1 able to apply their software development X X X X X
skills to implement practical systems
consisting of software and/or hardware
components.
Get hands on domain knowledge to pursue
2 X
higher education.
Become socially responsible technicians with

3 good leadership qualities, ethical values and X X X
effective interpersonal skills.
PROGRAM SPECIFIC OUTCOMES (PSOs)
Program shall specify 2-4 Program Specific Outcomes

1. Demonstrate skills in the core knowledge areas of Data Structures, Programming Languages,
Databases, Software Engineering, Development & testing, Computer Hardware and Networking.
2. Apply problem-solving skills and the knowledge of computer science to solve real world
problems.
3. Develop technical project and present the reports effectively
1.0 GENERAL PROGRAMME STRUCTURE AND CREDIT DISTRIBUTION
1. Definition of Credit: Credit is a kind of weightage given to the contact hours to teach the
prescribed syllabus, which is in a modular form. For courses, one credit is allocated to one contact
hour for theory / tutorial per week and one credit is allocated to 02 contact hours for practical.
2. Choice-Based Credit System (CBCS): CBCS is a flexible system of learning that permits
students to learn at their own pace, choose electives from a wide range of elective courses and
adopt an inter-disciplinary approach in learning and make best use of the expertise of available
faculty.

3. Range of Credits
1 Hr. Lecture (L) per week 1 credit
1 Hr. Practical (P) per week 0.5 credit
1 Hr. Tutorial (T) per week 1 credit
4 Hrs. Theory (T) per week 4 credit
3 Hrs. Practical (P) per week 2 credit
[1 Hr. Tutorial +2 Hrs. Practical]
4. Programme: Programme means Diploma Programme that is Diploma in Information Science

&Engineering, which is of three years duration.
2.0 PROGRAMME STRUCTURE
1. Course: A Course is a component (a paper) of a Programme. All the courses need not carrysame
weightage. The course should define Course objectives. A course may be designed to involve lectures
/ tutorials / laboratory work / seminar / project work/ Internships / seminar or a combination of
these, to meet effectively the teaching and learning needs and the credits may be assigned suitably.
2. Course Code: Each course shall have an alphanumeric code, which includes last two digits of year
of introduction such as 20 subject code IS (IS for Information Science & Engineering, CH for Chemical
Engineering etc. ), then first two digits for example 12 (where 1 represents first semester and 2
represents the course number in incremental order) and the last alphabet represent Theory (T),
Practical/Internship/Project (P), Drawing (D), Programme / Open Electives (A, B, C, E, F, G …).
3. Programme Courses: Each Programme will consist of Communication skills and Social Sciences
(HS), Engineering Mathematics, Statistics and Analytics (BS), Engineering Sciences (ES), Professional
Core (PC), Professional Electives (PE), Open Electives (OE), Employability Enhancement Courses
(EEC) and Internships.
1. Communication Skills and Social Sciences: Communication Skills and Social Science
courses are incorporated in the curriculum to meet the desired needs of communication and
life skills amongst students.
2. Engineering Mathematics, Statistics and Analytics: Common to all Engineering
Programme to develop reasoning and analytical skills amongst students.
3. Engineering Sciences: Engineering Science shall create awareness on
differentspecializations of engineering studies. The goal of these courses are to create
engineers of tomorrow, who possess the knowledge of all disciplines and can apply their

interdisciplinary knowledge in every aspect. It could be any branch of engineering - Civil,

Computer Science and Engineering, Electrical, Mechanical, etc.
4. Professional Core: CoreCourses designed in the programme which are major courses of the
discipline, required to attain desired outcomes and to ignite critical thinking skills amongst
students.
5. Professional Elective: Generally a course can be chosen from a pool of courses and
whichmay be very specific or specialized or advanced or supportive to the discipline or
nurtures the candidate's proficiency/skill is called Professional Elective Course.
6. Open Electives: An elective course chosen generally from other discipline/ subject, with
anintention to seek interdisciplinary exposure is called an open elective. While choosing the
electives, students shall ensure that they do not opt for the courses with syllabus contents of
which are similar to that of their departmental core/elective courses.
7. Audit / Non-Core Courses: An audit / Non-core course is one in which the student attends
classes, does the necessary assignments, and takes exams. The Institute encourages students
towards extra learning by auditing for additional number of courses. The results of audit
courses shall not be considered for prescribed “carry over courses” limit, however students
need to pass audit courses for awarding the diploma.
8. Employability Enhancement Courses: It contains the following courses:
a. Mini Project: Mini Project is a laboratory oriented course which will provide aplatform
to students to enhance their practical knowledge and skills by development of small
systems/application.
b. Seminar: Seminar should be based on thrust areas in state of arttechnologies. Students
should identify the topic of seminar and finalize in consultation with Guide. Students
should understand the topic and compile the report in standard format and present in
front of Panel of Examiners respective Programme.
c. Major Project: Every student must do one major project in the Final year of their
program. Theminimum duration of project is 6 months. Students can do their major
project in Industry or R&D Lab or in house or combination of any two.

3.0 COURSE CODE AND DEFINITION:
Cours Teaching Teaching

Name of the Teaching Name of the Teaching
e code Definitions Dept. Dept.
Department Department
Code Code
Mechanical Engineering
L Lecture SC Science MI
[Instruments]
Commercial Practice
T Tutorial CP CR Ceramic Engineering
/ English
Mechanical
P Practical ME EN Civil Environmental Engg.
Engineering
Humanities & Social Electrical &
HS EE AN Aeronautical Engg.
Sciences Courses Electronics Engg.
BS Basic Science Courses CE Civil Engineering MN Mining & Mine Surveying
Engineering Science Electronics &Commn. Modern Office
ES EC MM
Courses Engg. Management
Library and Information
PC Program Core Courses CS Comp Science &Engg. LI
Science
Program Elective Apparel Design and
PE IS Info Science &Engg. FT
Courses Fabrication Technology
OE Open Elective Courses AT Automobile Engg. CH Chemical Engineering
AU Audit Courses MC Mechatronics PO Polymer Technology
SI Summer Internship MT Metallurgical Engg. PT Printing Technology
Mechanical
PR Project HP TX Textile Technology
Engineering [HPT]
Mechanical
Electronic
Engineering[
SE Seminar WS EI Instrumentation & Control
Welding & Sheet
Engg.
Metal]
Continuous Internal Leather & Fashion
CIE CN Cinematography LT
Evaluation Technology
Semester End Sound Recording Water Technology &
SEE SR WH
Examination &Engg. Health Science
Civil (Public Health & Mechanical Engineering
PH MY
Environment) Engg. [Machine Tools]
TD Tool & Die Making AR Architecture
ID Interior Decoration EG English
4.0 INDUCTION PROGRAMME
The Essence and Details of Induction program can also be understood from the “Detailed Guide on
Student Induction program’, as available on AICTE Portal, although that is for Diploma students of
Engineering & Technology. Suggestive schedule for induction program is given below
(Link:https://www.aicteindia.org/sites/default/files/Detailed%20Guide%20on%20Studen
t%20Induction%20program.pdf)

Induction Program Schedule (Suggestive only)

(Induction program for students to be offered right at the start of the first year)
SL
DAY TIME ACTIVITY VENUE
NO
Registration, Formation of Mentor-mentee groups – Introduction of Class rooms of
09.30-
mentors with-in group. respective
12.30
programs
1 1
01.30- Screening of Institute video clips of various functions held and Photos
of various events, Institution Excursion Seminar hall
04.30
Prayer- Physical activities such as yoga; Presentation cum Interactive
09.30- Session with: Important Institution Functionaries like Principal, HoDs Play ground and
12.30 etc. seminar hall
Visit to Central facilities such as Reading room,library,Sport centre,

2 2 01.30-
computer centre, hostel, NSS/NCC cell, community development cell Tour
04.30
functioning in polytechnic
Lecturer sessions about importance of NSS/NCC/Youth red cross
01.30-
activities and their contribution towards national building and Seminar hall
04.30
personality and character development
09.30- Seminar hall
Personality development talk on Human values
12.30
4 4
01.30- Interaction with Alumni students of polytechnic of different programs Seminar hall
04.30 and interaction with few alumina and sharing their experiences
09.30- Introduction to Swatch barathabhiyan-Importance of abhiyan-Clean Campus
12.30 drive in around college
5 5
01.30- College
Talent hunt-Music/Antakshri/Instrument play/ Dance/Team Activity
04.30 Auditorium
09.30- Talent hunt Activity: Essay/Debate/Best out of Waste/Pick and speak
Seminar hall
12.30 ,other
6 6 Screening of Movie related: personality development, character
01.30- College
building, motivational ,Environmental concern, Public health, rural
04.30 Auditorium
sanitation
09.30- Exchange of views between students and faculty about their
Seminar hall
12.30 Institute/program/carrier opportunities
7 7
01.30-
Games/Sports Activity Sports ground
04.30
09.30- Talk by training and placement cell: Carrier opportunities for diploma Training and
12.30 students, placement activities in college; placement process placement cell
8 8
01.30- Talents hunt Activity: (Street Play/Mime/Acting/Stand Up Comedy
Seminar hall
04.30 /Dance etc.)
09.30- Personality development talks by eminent speakers on -Leadership
Seminar hall
12.30 styles/How to handle failures/stress management
9 9 Importance of student union, student union activities, Student
01.30-
insurance, How to make student insurance by Student welfare officer Seminar hall
04.30
of college
Awareness on: Student scholarship- introduction to SSP portal –e-pass
09.30-
portal-Authenticated documents, how to apply in portal: Talk by Seminar hall
12.30
10 10 Taluk/District social welfare officer
01.30-
Local visits to surrounding places/Industry Tour
04.30

Talk on Respective Program scheme of studies and detail of courses,

09.30- Department
Diploma examination pattern, Passing and eligibility criteria,
12.30 Class rooms
11 11 attendance requirements by respective program coordinator
01.30-
Visit to respective programs lab/work shops of institution Tour
04.30
09.30- Awareness camp on human health ,Community health, Personal
Seminar hall
12.30 hygiene-By Local Taluk medical officer/Community medical officer
12 12 Collection of student feedback on induction program- Make a report
01.30-
Valedictory of two weeks Induction program by collecting student feed Seminar hall
04.30
back
Induction Program ( mandatory) Two- week Duration

Induction program for students to be • Physical activity
offered right at the start of the first • Creative arts
year. • Universal human values
• Literacy
• Proficiency modules
• Lectures by Eminent People
• Visits to Local Areas
• Familiarization to Dept./Branch & Innovations
5.0 MANDATORY VISITS/WORKSHOP/EXPERT LECTURES:
1. It is mandatory to arrange one industrial visit every semester for the students of each branch.
2. It is mandatory to conduct a One-week workshop during the winter break after fifth semester on
professional/ industry/ entrepreneurial orientation.
3. It is mandatory to organize at least one expert lecture per semester for each branch by inviting
resource persons from domain specific industry.
6.0 EVALUATION SCHEME:
A. For Theory Courses:

The weightage of Continuous Internal Evaluation (CIE) is 50% and for Semester End Exam (SEE) is
50%. The student has to obtain minimum of 40% marks individually both in CIE and SEE to pass.
Theory Semester End Exam (SEE) is conducted for 100 marks (3 Hours duration). Based on this
grading will be awarded
B. For Practical Courses:

The weightage of Continuous Internal Evaluation (CIE) is 60% and for Semester End Exam (SEE) is
40%. The student has to obtain minimum of 40% marks individually both CIE and SEE to pass. The
practical Semester End Exam (SEE) is conducted for 100 marks (3 Hours duration exams). Based on
this grading will be awarded.

C. For Summer Internship / Projects / Seminar etc.
1. Evaluation is based on work done, quality of report, performance in viva-voce,

presentation etc.
Note:
A. The Continuous Internal Evaluation (CIE) is based on the student’s performance in
Internal Assessment tests, student activity, mini project, quizzes, assignments, seminars,
viva-voce in practical, lab record etc as specified in respective course curriculum.
B. Major Project/Mini Project: Students can do their major project in Industry or R&D
Labor in house. Mini Project is a laboratory oriented course which will provide a platform
to students to enhance their practical knowledge and skills by development of small
systems/application.
C. Personality and character development: It is mandatory for the students from 1s
semester to enroll in any one of the personality and character development programmes
(NCC/NSS/YRC/Yoga/Technical Club) and undergo training for their Personality and
character development.
• National Cadet Corps (NCC).
• National Service Scheme (NSS) will have social service activities in and
around the Institution.
• Youth Red Cross (YRC) will have activities in and around the institution.
• Yoga
• Technical Clubs.
D. Internship:A minimum of 10 credits (400 Hrs) of Internship/ Entrepreneurial activities /
Project work/ Seminar and Inter/ Intra Institutional Training may be counted toward
three-year diploma programme.
E. Mapping of Marks to Grades:Each course (Theory/Practical) is to be assigned 100
marks, irrespective of the number of credits, and the mapping of marks to grades may be
done as per the following table:
Range of Marks Level Assigned Grade Grade Point
91-100 Outstanding A+ 10
81-90 Excellent A 09
71-80 Very Good B+ 08
61-70 Good B 07
51-60 Above Average C+ 06
45-50 Average C 05
40-44 Satisfactory D 04
<40 Fail F 00
Fail due to shortage of attendance and therefore, to
F* 00
repeat the course/semester.
Fail in Continuous internal Evaluation (CIE). F** 00

Note: Those Candidates who have not obtained requisite minimum pass marks in CIE are not eligible to
take up SEE in that course until they get requisite minimum pass marks in the CIE. They may re- register
for the CIE in the subsequent regular semesters by paying prescribed examination fee.
SGPA and CGPA Calculations

∑[(Course Credits earned)X(Grade Points)] for all the
Semester Grade Point Average courses in that semester
(SGPA)= ∑[Total Course credits applied] for all the courses in that
semester
∑[(Course Credits earned)X(Grade Points) for all courses,
Cumulative Grade excluding those with F*/F** grades until that semester
PointAverage(CGPA)= ∑[Total Course Credits earned] for all Courses excluding
those with F*/F** grades until that semester
Note: The SGPA and CGPA shall be rounded off to 2 decimal points and reported in the semester Diploma
marks /grade card.
A. SGPA and CGPA Calculations: An illustrative example for one academic year
Semest Course Credits Result Grade Credits Credit points SGPA, CGPA
er Code Applied Grade Points Earned (CP=CE x GP)
(CA) (GP) (CE)
I Course 1 4 B 7 4 4x7=28
I Course 2 4 F 0 0 0x0=00 SGPA=CP/CA
I Course 3 4 Absent (F) 0 0 0x0=00
I Course 4 4 A 9 4 4x9=36 =110/22
I Course 5 2 A+ 10 2 2x10=20
I Course 6 2 D 4 2 2x4=08 = 5.00
I Course 7 2 A 9 2 2x9=18
Total 22 14 110 SGPA = 5.00
Note: In 1s semester grade/marks card only SGPA is reported. From 2 d semester onwards both SGPA &
CGPA will be reported in the grade/marks card.
Semest Course Credits Result Grade Credits Credit SGPA, CGPA
er Code Applied Grade Points Earned points(CP=C
(CA) (GP) (CE) E x GP)
II Course 1 4 B 7 4 4x7=28 SGPA=CP/CA
II Course 2 4 A 9 4 4x9=36
=100/19
II Course 3 3 D 4 3 3x4=12
II Course 4 3 Absent (F) 0 0 0x0=00 = 5.26
II Course 5 2 A+ 10 2 2x10=20 CGPA
II Course 6 1 D 4 1 1x4=04 = CP/CE
=(110+136)/
II Course 7 2 F 0 0 0x0=00
(14+22)
19 14 100 = 246/36
I Semester Back log courses =6.83
I Course 2 4 C 5 4 4x5=20
I Course 3 4 D 4 4 4x4=16
Total 27 22 136

• Total credits of the semester excluding the credits of the courses under F/F*/F** grade are
considered for the calculation of CGPA of the two consecutive semesters under consideration.
B. CGPA Calculation of the entire programme: An Illustrative Example.
Semester I II III IV V VI Total
Credits of the Semester 22 19 24 24 24 24 137
∑CP 110 136 184 155 191 188 964
964
CGPA = [110+136+184+155+191+18]
= = 7.04
22+19+22+24+24+24 137
P=Percentage Conversion= (CGPA-0.75) X 10

Class Declaration:
After the conversion of final CGPA into percentage of marks (P), a graduating student is declared to
have passed in:
(i) First Class with Distinction (FCD) if P ≥ 70%
(ii) First Class (FC) if P ≥ 60% but <70% and
(iii) Second Class (SC) if P < 60%.

SCHEME OF STUDIES
DIPLOMA IN INFORMATION
SCIENCE & ENGINEERING
(C-20)

Government of Karnataka
Department of Collegiate and Technical Education
Board of Technical Examinations, Bangalore
Course Code 20SC01T Semester I/II

ENGINEERING
Course Title Course Group Core
MATHEMATICS
No. of Credits 4 Type of Course Lecture
4Hrs Per Week
Course Category Theory Total Contact Hours
52Hrs Per Semester
Prerequisites 10 Level Mathematics Teaching Scheme (L:T:P) = 4:0:0
CIE Marks 50 SEE Marks 50
RATIONALE
Engineering Mathematics specification provides students with access to important mathematical
ideas to develop the mathematical knowledge and skills that they will draw on in their personal and
work lives. The course enable students to develop mathematical conceptualization, inquiry,
reasoning, and communication skills and the ability to use mathematics to formulate and solve
problems in everyday life, as well as in mathematical contexts. At this level, the mathematics
curriculum further integrates the three content areas taught in the higher grades into three main
learning areas: Algebra; Measurement of angles and Trigonometry and Calculus.
1. COURSE SKILL SET

Student will be able to:
1. Solve system of linear equations arise in different engineering fields
2. Incorporate the knowledge of calculus to support their concurrent and subsequent
engineering studies
3. Adept at solving quantitative problems
4. Ability to understand both concrete and abstract problems
5. Proficient in communicating mathematical ideas
6. Detail-oriented
2. COURSE OUT COMES

At the end of the course, student will be able to
Determine the inverse of a square matrix using matrix algebra. Apply the concepts
CO1 of matrices and determinants to solve system of linear equations and find eigen
values associated with the square matrix.
Find the equation of straight line in different forms. Determine the parallelism and
CO2
perpendicularity of lines.
Calculate trigonometric ratios of allied angles and compound angles. Transform sum
CO3
or difference of trigonometric ratios into product and vice versa.

Differentiate various continuous functions and apply the concept in real life
CO4
situations.
Integrate various continuous functions and apply the concept in evaluating the area
CO5
and volume through definite integrals.
3. SUGGESTED SPECIFICATION TABLE WITH HOURS & MARKS

DISTRIBUTION(THEORY)
UNIT TEACHING
UNIT TITLE R U A
NO HOURS TOTAL
LEVEL LEVEL LEVEL
1 Matrices and Determinants 10 8 20 12 40

2 Straight lines 10 8 20 12 40
3 Trigonometry 10 8 20 12 40
Differential Calculus and
4 11 8 20 12 40
applications
Integral Calculus and
5 11 8 20 12 40
applications
Total 52 40 100 60 200
Legends: R = Remember; U = Understand; A = Apply and above levels (Bloom’s revised
taxonomy)
4. DETAILS OF COURSE CONTENT

The following topics/subtopics is to be taught and assessed in order to develop Unit Skill sets for
achieving CO to attain identified skill sets.
UNIT Unit skill set Hours
Topics/Subtopics
NO (In cognitive domain) L-T-P
1.1 Matrix and types
MATRICES AND DETERMINANTS
1.2 Algebra of Matrices (addition,

subtraction, scalar multiplication
and multiplication)
Ø Use algebraic skills which 1.3 Evaluation of determinants of a
are essential for the study square matrix of order 2 and 3.
UNIT-1
of systems of linear Singular matrices 10-0-0

equations, matrix algebra 1.4 Cramer’s rule for solving system
and eigen values of linear equations involving 2
and 3 variables
1.5 Adjoint and Inverse of the non-
singular matrices of order 2 and 3
1.6 Characteristic equation and Eigen
values of a square matrix of order 2

Ø Able to find the equation 2.1 Slope of a straight line

of a straight line in 2.2 Intercepts of a straight line
different forms 2.3 Intercept form of a straight line
STRAIGHT LINES
Ø Determine whether the 2.4 Slope-intercept form of a straight line
lines are parallel or 2.5 Slope-point form of a straight line
2.6 Two-point form of a straight line
UNIT-2
perpendicular 10-0-0
2.7 General form of a straight line
2.8 Angle between two lines and conditions
for lines to be parallel and perpendicular
2.9 Equation of a straight line parallel to the
given line
2.10 Equation of a straight line perpendicular
to the given line
3.1 Concept of angles, their measurement,
Radian measure and related conversions.
Ø Use basic trigonometric 3.2 Signs of trigonometric ratios in different
skills in finding the quadrants (ASTC rule)
TRIGONOMETRY
trigonometric ratios of 3.3 Trigonometric ratios of allied angles

allied and compound (definition and the table of
UNIT-3
angles 10-0-0
trigonometric ratios of standard
Ø Able to find all the allied angles say 900±Ɵ, 1800±Ɵ,
measurable dimensions 2700±Ɵ and 3600±Ɵ)
of a triangle 3.4 Trigonometric ratios of compound
angles (without proof)
3.5 Trigonometric ratios of multiple angles
3.6 Transformation formulae
Ø Able to differentiate 4.1 Derivatives of continuous functions in an
algebraic, exponential, interval (List of formulae)
DIFFERENTIAL CALCULUS
trigonometric, logarithmic 4.2 Rules of differentiation

AND APPLICATIONS
and composite functions 4.3 Successive differentiation (up to second

Ø Able to find higher order order)
UNIT-4
derivatives 4.4 Applications of differentiation

11-0-0
Ø Understand and work with
derivatives as rates of
change in mathematical
models
Ø Find local maxima and
minima of a function
Ø Understand the basic rules 5.1 List of standard integrals and Basic rules
INTEGRAL CALCULUS AND
of integration and of integration

Evaluate integrals with 5.2 Evaluation of integrals of simple
basic integrands. function and their combination
APPLICATIONS
5.3 Methods of integration

Ø Identify the methods to
UNIT-5
5.4 Concept of definite integrals

evaluate integrands 5.5 Applications of definite integrals 11-0-0
Ø Apply the skills to evaluate
integrals representing areas
and volumes

5. MAPPING OF CO WITH PO
PO UNIT CL Theory TOT
CO Course Outcome
Mapped Linked R/U/A in Hrs AL
Determine the inverse of a square
matrix using matrix algebra. Apply the
CO1
concepts of matrices and determinants 1, 7 1 R/U/A 10 40
to solve system of linear equations and
find eigen values associated with the
square matrix.
Find the equation of straight line in
CO2 different forms. Determine the 1, 7 2 R/U/A 10 40
parallelism and perpendicularity of
lines.
Calculate trigonometric ratios of allied
angles and compound angles.
CO3 1, 7 3 R/U/A 10 40
Transform sum (difference) of
trigonometric ratios into product and
vice versa.
Differentiate various continuous
CO4 1, 3, 7 4 R/U/A 11 40
functions and apply the concept in real
life situations.
Integrate various continuous functions
CO5 and apply the concept in evaluating the 1, 3, 7 5 R/U/A 11 40
area and volume through definite
integrals.
52 200
Course CO’s Programme Outcomes (PO’s)

1 2 3 4 5 6 7
CO1 3 1 0 0 0 0 3
CO2 3 1 0 0 0 0 3
ENGINEERING MATHEMATICS CO3 3 1 0 0 0 0 3
CO4 3 1 3 0 0 0 3
CO5 3 1 3 0 0 0 3
Level 3- Highly Mapped, Level 2-Moderately Mapped, Level 1-Low Mapped, Level 0- Not Mapped

7. INSTRUCTIONAL STRATEGY
These are sample Strategies, which teacher can use to accelerate the attainment of the various course
outcomes
1. Explicit instruction will be provided in intervention classes or by using different differentiation
strategies in the main classroom.
2. Lecturer method (L) does not mean only traditional lecture method, but different type of teaching
method and media that are employed to develop the outcomes.
3. Observing the way their more proficient peers use prior knowledge to solve current challenges
and persevere in problem solving will help struggling students to improve their approach to
engaging with rich contextual problems.
4. Ten minutes a day in homeroom, at the end of class, or as a station in a series of math activities
will help students build speed and confidence.
5. Topics will be introduced in a multiple representation.
6. The teacher is able to show different ways to solve the same problem and encourage the students
to come up with their own creative ways to solve them.
7. In a perfect world, teacher would always be able to demonstrate how every concept can be
applied to the real world - and when that's possible, it helps improve the students' understanding.
When a concept cannot be applied in that manner, we can still share how it might be applied
within mathematics.
8. SUGGESTED LEARNING RESOURCES:
Sl.
Author Title of Books Publication/Year
No.
Higher Engineering Khanna Publishers, New Delhi,
1 B.S. Grewal
Mathematics 40th Edition,2007
G. B. Thomas, R. L. Calculus and Analytic Addison Wesley, 9th Edition,
2
Finney Geometry 1995
S.S. Sabharwal, Sunita Applied Mathematics, Vol. I &
3 Jalandhar.
Jain, Eagle Parkashan II
Comprehensive Comprehensive Mathematics
4 Laxmi Publications, Delhi
Mathematics Vol. I & II
ReenaGarg Advanced Engineering Khanna Publishing House, New
5
&Chandrika Prasad Mathematics Delhi

9. COURSE ASSESSMENT AND EVALUATION CHART

Sl.No. Assessment Duration Max marks Conversion
CIE Assessment 1
1 (Written Test -1) 80 minutes 30 Average of three
At the end of 3 d week written tests
CIE Assessment 2
2 (Written Test -2) 80 minutes 30 30
At the end of 7 week
CIE Assessment 3
3 (Written Test -3) 80 minutes 30
CIE Assessment 4
4 (MCQ/Quiz) At the end of 60 minutes 20
5 week
CIE Assessment 5
(Open book Test) Average of three
5 60 minutes 20
At the end of 9 week 20
CIE Assessment 6
(Student
6 activity/Assignment) 60 minutes 20
Total Continuous Internal Evaluation (CIE) Assessment 50
Semester End Examination
8 (SEE) Assessment (Written 3 Hours 100 50
Test)
Total Marks 100
Note:
1. SEE (Semester End Examination) is conducted for 100 Marks theory courses for a time
duration of 3 Hours.
2. Three CIE (written test), each of 30 marks for a time duration of 80 minutes shall be
conducted. Also, three CIE (MCQ or Quiz/Open book test/student activity or assignment)
each of 20 marks for the time duration of 60 minutes shall be conducted. Any fraction at any
stage during evaluation will be rounded off to the next higher digit
3. Assessment of assignment and student activity is evaluated through appropriate rubrics by
the respective course coordinator. The secured mark in each case is rounded off to the next
higher digit.

10 DETAILED COURSE CONTENT

UNIT
NO CONTACT
DETAILED COURSE CONTENT CO PO TOTAL
AND HRS
NAME
Definition and types of matrices 1 1,7 1
Algebra of Matrices (addition, subtraction and
MATRICES AND DETERMINANTS
1 1,7 1
scalar multiplication) problems
Multiplication of Matrices(problems) 1 1,7 1
Evaluation of 2x2 ,3x3 determinants and
Singular matrices and problems in finding 1 1,7 1
unknown variable
Cramer’s rule to solve system of linear equation with 2
1 1,7 1
and 3 variables
10
1
Cramer’s rule to solve system of linear equation with 2

1 1,7 1
and 3 variables.problems
Minors, Cofactors of elements of square matrices of
1 1,7 1
order 2 and 3
Adjoint of a square matrix(2x2 and 3x3),Inverse of a
1 1,7 1
non singular square matrix
Adjoint of a square matrix(2x2 and 3x3),Inverse of a
1 1,7 1
non singular square matrix and problems
Characteristic equation and eigen values of a 2x2
1 1,7 1
matirx and problems
Slope of the straight line(provided with inclination and
2 1,7 1
two points on the line as well) and problems
Intercepts of a straight line and problems 2 1,7 1
Intercept form of a straight line and problems 2 1,7 1
STRAIGHTLINES
Slope-intercept form of a straight line and problems 2 1,7 1

Slope-point form of the straight line and problems 2 1,7 1
Two-point form of a straight line and problems 2 1,7 1
10
2
General form of a straight line.problems on finding

2 1,7 1
slope and intercepts.
Angle between two straight lines and conditions for
the lines to be parallel and perpendicular and 2 1,7 1
problems
Equation of a line parellel to the given line and
2 1,7 1
problems
Equation of a line perpendicular to the given
2 1,7 1
line.problems

Concept of angles and their measurement.

Radian measures and related conversions (degree to 3 1,7 1
radian and vice-versa) and problems
Signs of trigonometric ratios in different quadrants
3 1,7 1
(ASTC rule)
Trigonometric ratios of allied angles (definition and
the table of trigonometric ratios of standard allied 3 1,7 1
TRIGONOMETRY
angles say 900±Ɵ, 1800±Ɵ, 2700±Ɵ and 3600±Ɵ)

Problems on allied angles. (proving identities) 3 1,7 1
Problems on allied angles. (Finding values of x in an
3 1,7 1 10
3
identity)
Trigonometric ratios of compound angles (without
3 1,7 1
proof)
Trigonometric ratios of multiple angles (sin2A,
3 1,7 1
cos2A, tan2A, sin3A, cos3A and tan3A)
Problems on multiple angles sin2A, cos2A, tan2A,
3 1,7 1
sin3A, cos3A and tan3A
Transformation formulae (without proof) as sum to 3
1,7 1
product. (Simple problems)
Transformation formulae (without proof) as product 3
1,7 1
to sum. (Simple problems)
Definition of a derivative of a function. Listing the
derivatives of standard functions. (Algebraic,
4 1,3,7 1
DIFFERENTIAL CALCULUS AND
trigonometric, exponential, logarithmic and inverse

trigonometric functions)
Addition and subtraction rule of differentiation and
4 1,3,7 1
problems
APPLICATIONS
Product rule and quotient rule of differentiation and

4 1,3,7 1
problems
Product rule and quotient rule of differentiation and 11
4
4 1,3,7 1
problems
Composite functions and their derivatives. (CHAIN
4 1,3,7 1
RULE)
Composite functions and their derivatives. (CHAIN
4 1,3,7 1
RULE). Problems
Successive differentiation up to second order 4 1,3,7 1
Slope of the tangent and normal to the given curve
4 1,3,7 1
and their equations and problems

Rate measure: velocity and acceleration at a point of

4 1,3,7 1
time and problems
Local Maxima and Minima of a function 4 1,3,7 1
Local Maxima and Minima of a function. Problems 4 1,3,7 1
Definition of an indefinite integral. Listing the
INTEGRAL CALCULUS AND APPLICATIONS
Integrals of standard functions. (Algebraic,
5 1,3,7 1
trigonometric, exponential, logarithmic and inverse
trigonometric functions)
Rules of Integration. Evaluation of integrals with
5 1,3,7 1
simple integrands and their combinations
Rules of Integration. Evaluation of integrals with
5 1,3,7 1
simple integrands and their combinations. Problems
Evaluation of integrals with simple integrands and
5 1,3,7 1 11
their combinations. Problems
Evaluation of integrals by Substitution method 5 1,3,7 1
5
Evaluation of integrals by Integration by parts 5 1,3,7 1

Evaluation of integrals by Integration by parts.
5 1,3,7 1
Problems
Definition of definite integrals and their evaluation 5 1,3,7 1
Evaluation of Definite integrals. Problems 5 1,3,7 1
Area enclosed by the curves by integral method 5 1,3,7 1
Volume generated by the curve rotated about an axis

5 1,3,7 1
by integral method

First Semester Examination, Model Question Paper – 2020

Engineering Mathematics
Duration: 3Hours] Subject Code: 20SC01T [ Max. Marks:100
Instruction: Answer one full question from each section. One full question carries 20 marks.
SECTION – 1
1 é2 4 6 ù
a If the matrix ê2 x 2 ú is singular then find x . 4
ê ú
êë6 8 14 úû
é1 3 4ù
b Find the A2 for the matrix ê- 1 2 1 úú . 5
ê
êë 0 3 3úû
c Solve 2 x - y = 3 and x + 2 y = 4 by using determinant method. 5
é 2 3 1ù
d Find the inverse ofthe matrix ê- 1 2 1ú . 6
ê ú
êë 5 4 3úû
2 é 2 -1ù é 1 - 3 4ù
ê ú
If A = ê 4 0 ú and B = ê- 1 - 1 1ú then find ( AB )T.
a ê ú 4
êë1 3 úû êë 0 4 2úû
b é 1 0 5ù
Verify whether AB=BA for the matrices A = ê- 1 2 1ú and
ê ú
êë 5 4 3úû
5
é3 - 1 4 ù
B = êê0 - 1 1 úú .
êë2 4 - 2úû
é 1 3 4ù
c Find the Adjoint of the matrix A = ê- 1 2 1ú . 5
ê ú
êë 0 3 3úû
é1 2ù
d Find the charcteristic equation and eigen values for the matrix ê ú. 6
ë3 `1û

SECTION – 2
3
a If the straight line is passing through the points (1, 2) and (3, 5) then find the 4
slope of the line.
Write the standard intercept form of the straight line and hence find the
b equation of the straight line whose x and y intercepts are 2 and 3
5
respectively.
c Write the standard slope-intercept form of a straight line. Find the equation 5
of the straight line passing through the point (3, 5) and slope 4 units.
d Find the equation of the straight line parallel to the line passing through the 6
points (1, 3) and (4, 6).
4
a i) If a line inclined at 45! with x-axis find its slope. ii) Write 2+2
the x and y intercept of the line 2x+3y=10.
b Find the equation of the straight line whose angle of inclination is 450 and 5
passingthrough the origin.
c Find the equation of the straight line perpendicular to the line 2x+6y=3 and 5
with the y intercept 2 units.
d Find the acute angle between the lines 7x-4y=0 and 3x-11y +5=0. 6
SECTION – 3
5 a Express 75! in radian measure and 3π/2 in degree. 4

b Prove that cos( A + B) cos( A - B) = cos 2 A - sin 2 B . 5
c Show that cos 2q = 2 cos 2 q - 1. 5

Find the value of sin120! × cos330! - sin 240! × cos390! without using
d 6
calculator.
6 a Find the value of sin15! . 4
cos(360! - A) tan(360! + A)
b Simplify . 5
cot(270! - A) sin(90! + A)
c Prove that sin 3q = sin 3q - 4 sin 3 q . 5

3
d Prove that sin 20! × sin 40! × sin 80! = . 6
8
SECTION – 4
7 a Find the derivative of y = x 2 + e 2 x + cos 2 x - 2 log x with respect to x . 4

b sec x + tan x
Find dy/dx of y = . 5
sec x - tan x
c æ1+ x ö
Find dy/dx of y = tan -1 ç ÷. 5
è1- x ø
d If the s = 2 x 3 + 3x + 4 repersents the displacement of the particle in motion at

6
time x, then find the velocity of the particle at x = 2 secs and acceleration at
x = 3 secs.
8 a Find
dy
of y = 3x 4 + 4 log x + 2e 3 x + tan -1 x .
dx 4
dy
b If y = e 2 x sin 3x then find . 5
dx
d2 y
c Find if y = 3sin x + 4 cos x at x = 1. 5
dx 2
d Find the equation of tangent and normal to the curve y = x 2 at the point 6
(1, 1).

SECTION – 5
9 a Evaluate ò ( x - 1)( x + 1)dx . 4

p/2
b Evaluate ò sin 2 x dx 5
0
c Evaluate ò x sin xdx . 5
d Find the area bounded by the curve y = 4 x - x 2 - 3 , x-axis and ordinates 6

x = 1 and x = 3 .
10 2
a Evaluate ò e x dx . 4
0
4 cos(log x)
b Evaluate ò x
dx . 5
c Evaluate ò x e x dx . 5
d Find the volume of the solid generated by revolving the curve y = x 2 + 5 x 6

between x = 1and x = 2 .
*************************

Course Code 20CS11T Semester I

FUNDAMENTALS OF
COMPUTER
4Hrs Per Week
Course Category PC Total Contact Hours
52Hrs Per Semester
Prerequisites Nil Teaching Scheme (L: T:P) = 4:0:0
1. COURSE RATIONALE
Fundamentals of Computer is the foundational course that sets the base for computer science
engineering. Core knowledge of number system, conversion, Boolean algebra, logic circuits are
fundamental and even sets the basis for further study of computer organization & architecture,
system software and computer network. Understanding the functional units, peripherals and
components of a computer is vital.
2. COURSE SKILL SET

The aim of the course is to help the student to attain the following industry identified competency
through various teaching –learning experiences
1. Identify computer hardware and software
2. Understand the data representation in computers
3. Basic knowledge of computer system and its working
4. Basic knowledge of logical thinking and problem solving
3. COURSE OBJECTIVES
1. Introduction to number system, conversion and data representation
2. Introduction to logic design
3. Understand functional units and components of computer
4. Develop logical thinking and problem-solving skills


taxonomy)
These are sample strategies, which teacher can use to accelerate the attainment of the
various course outcomes
1. Massive Open online courses (MOOCS) can be used to teach various topics/subtopics.
2. Lecture method(L) does not mean only traditional lecture method, but different type of
teaching methods and media can be employed to develop the outcomes.
3. About 15 to 20% of the topics/subtopics which are relatively simpler or descriptive in
nature are to be given to the students for self-directed learning.
4. Arrange visits to nearby Offices/Industries/ Academic institution having network facility
to understand types of network and types of computers being used.
5. Use different instructional strategies in classroom teaching
6. Use of virtual labs wherever mentioned

The following topics/subtopics is to be taught and assessed in order to develop Unit Skill
sets for achieving CO to attain identified skill sets
UNIT TOPICS/SUBTOPICS LEARNING OUTCOME HOURS

NO (IN COGNITIVE DOMAIN) L-T-P
1 BASICS OF LOGIC DESIGN 12
1.1 Introduction to number system. 1. Understand various
• Binary number representation
• Octal 2. Perform conversion and
• Decimal arithmetic operations using
• Hexadecimal different number system
(characteristics of each number 3. Apply the knowledge of
system) codes to represent data
1.2 Conversion from one number system 4. Explain the working of logic
to other gates
1.3 Complements of number systems and 5. Apply Boolean rules and
arithmetic operations laws to solve the Boolean
1.4 Computer codes (BCD, EBCDIC, ASCII expression

Code, Gray code, Excess-3 code and

Unicode)
1.5 Logic gates
1.6 Boolean algebra (rules, laws, De-
Morgan Theorem, Boolean
expressionsand simplifications)
Note:
1. Use visual/graphic content for demonstration
2. Demonstrate data representation inside the computer using virtual
labs
3. Demonstrate logic gates using virtual labs
4. Explain with block diagram, circuit diagram and truth table
2 LOGIC CIRCUITS 14
2.1 Combinational Circuits
§ Characteristics 1. Identify logic circuits
§ Logic circuit design 2. Describe the working of logic
§ Block diagram, features & circuits
Applications of 3. Compare combinational and
§ adders,subtractors and comparators sequential circuits
§ multiplexers, demultiplexers 4. List the applications of logic
§ encoders, decoders and code circuits
converters (7 segment)
2.2 Sequential Circuits
§ Characteristics
§ Types
§ Asynchronous
§ Synchronous (clocked, un
clocked)
§ Flip flops
o Types, circuit analysis
and truth table
§ Applications of sequential circuits
o Shift registers (types and

application)
o Counters (classification
and application)
Note:
1. Demonstrate logic circuits and their application using virtual labs
3 INTRODUCTION TO COMPUTER CONCEPTS 8

3.1 Introduction to computers 1. Describe the characteristics
§ Evolution of computer (abstract of computer of various
only) generations
§ Generation of computers 2. Identify the functional units
§ Classification of computer and peripherals of a computer
§ Applications 3. Identify components of a
3.2 Components of computers computer system
§ Hardware (different types of 4. Explain computer network
hardware components) concepts such as types, protocols
§ Software 5. Identify and distinguish
(System Software, Application threats and viruses
Software, E-accessibility
Software)
(Open source, freeware and
proprietary software)
§ Peripherals (working of
keyboard and laser printer)
3.3 Computer Network (Concept Only)
§ Basics
§ Categories
§ Protocols (Application layer)
§ Advantages.
3.4 Methods of data processing
(concepts only)
§ Single user programming
§ Multi programming
§ Real-time processing
§ On-line processing

§ Time sharing processing

§ Distributed processing
3.5 Computer Security
§ Types of threats and source of
threats
Note
1. Demonstrate computer and computer software’s using videos and
other visual/graphical method
4 INTRODUCTION TO COMPUTER ORGANIZATION & OPERATING SYSTEM 10
4.1 Introduction 1.Examine the working of each

§ Overview of functional units of a functional unit
computer 2. Explain memory hierarchy
§ Stored Program Concept 3.Explain BIOS and UEFI
§ Flynn's Classification of Computers 4.Describe type and functions of
4.2 Memory Hierarchy OS
§ Main memory
§ Auxiliary memory
§ Cache memory
4.3 Introduction to BIOS and UEFI
4.4 OS Concepts
§ Overview
§ Types (Batch Operating System,
Multitasking/Time Sharing OS,
Multiprocessing OS, Real Time OS,
Distributed OS, Network OS,
Mobile OS)
§ Services
Note:
1. Demonstrate using videos and other visual/graphical method
5 INTRODUCTION TO COMPUTER PROGRAMMING 8
5.1 Basics of programming 1.Writing algorithms for
§ Algorithms and Flowcharts mathematical concepts
§ Basics 2.Representation with flowchart
§ Decision making 3. Identify the naming rules for

§ Iterative variables
(With sufficient examples)
5.2 Programming Languages
§ Generation of languages
§ General concepts of variables and
constants
Note:
1. Demonstrate using videos and other visual/graphical method
2. Use of online tools for flowchart design. ex:https://app.diagrams.net/

COURSE CO’S PROGRAMME OUTCOMES (PO’S)
1 2 3 4 5 6 7
FUNDAMENTALS OF CO1 3 - - 2 - - 1
COMPUTERS CO2 3 - - 2 - - 1
CO3 3 - - 2 -- - 1
CO4 3 - - 2 - - 3
CO5 3 - - 2 - - 3
Level 3- Highly Mapped, Level 2-Moderately Mapped, Level 1-Low Mapped, Level 0- Not
Mapped
11. SUGGESTED LEARNING RESOURCES
BOOKS
Digital fundamentals – Thomas L. Floyd, PEARSON EDUCATION publication, Eleventh

1
edition – Global Edition, ISBN 10: 1-292-07598-8, ISBN 13: 978-1-292-07598-3
Digital Electronics –principles and integrated circuits. Anil K. Maini. Wiley publications,
2
first edition. ISBN: 978-81-265-1466-3
Digital Electronics –principles and integrated circuits. Anil K. Maini. Wiley publications,
3
first edition. ISBN: 978-81-265-1466-3
Digital principles and applications. Donald P Leach, Albert Paul Malvino, GoutamSaha,
4 McGraw Hill Publisher, 7th edition, ISBN (13 digit): 978-0-07-014170-4 ISBN (10 digit):
0-07-014170-3
Digital Computer Fundamentals, - Thomas C Bartee, McGraw-Hill Publisher,4th edition.

5
ISBN 0-07-003892-9
6 Digital Logic and Computer Design M. Morris Mano

7 Introduction to Computer Science, ITL Education Solutions Pvt. Ltd., Pearson Education
8 “Computer Fundamentals” by Goel
URL’S
1 https://www.tutorialspoint.com/basics of computer science
2 https://www.guru99.com/operating-system-tutorial.html
3 https://www.javatpoint.com/computer-organization-and-architecture-tutorial
12. SUGGESTED LIST OF PROPOSED STUDENT ACTIVITYS

Note: the following activities or similar activities for assessing CIE (IA)
SL. NO ACTIVITY
1 Prepare a report on programming languages and their features

2 Prepare a report on open source and proprietary, system and application software
3 Prepare a report on recent viruses(computer)
4 Identify the logic circuits used in construction of memory and prepare a report
5 Identify the utilities of OS and prepare a report

SL.N ASSESSMENT DURATION MAX CONVERSION
O (in MARKS
minutes)
1 CIE Assessment 1 (Written Test -1) - At the 80 30 Average of
end of 3 d week three written
tests
2 CIE Assessment 2 (Written Test -2) - At the 80 30
30
end of 7 week
3 CIE Assessment 3 (Written Test -3) - At the 80 30
end of 13 week
4 CIE Assessment 4 (MCQ/Quiz)- At the end of 60 20 Average of
5 week three
5 CIE Assessment 5 (Open book Test) - At the 60 20 20
end of 9 week
6 CIE Assessment 6 (Student activity/ 60 20
Assignment)- At the end of 11 week
7 Total Continuous Internal Evaluation (CIE) Assessment 50

8 Semester End Examination (SEE) 3 hrs 100 50

Assessment (Written Test)
TOTAL MARKS 100
14. RUBRICS FOR ACTIVITY

RUBRICS FOR ACTIVITY (Example Only)
Dimension Poor Below Average Good Exemplary Student
average Score
4 8 12 16 20
Collection Does not collect Collects very Collect much Collects Collects a 8
of data any limited information; some basic great deal of
information information; but very information; information;
relating to the some relate limited most refer all refer to
topic to the topic relate to the to the topic the topic
topic
Fulfil Does not Performs Performs Performs Performs all 6
team’s roles perform any very little very little nearly all duties of
& duties duties assigned duties but duties duties assigned
to the team role unreliable. team roles
Shares Always relies Rarely does Usually does Normally Always does 8
work on others to do the assigned the assigned does the the assigned
equally the work work; often work; rarely assigned work
needs needs work without
reminding reminding having to be
reminded.
Listen to Is always Usually does Talks good; Listens, but Listens and 8
other Team talking; never most of the but never sometimes speaks a fair
mates allows anyone talking; show talk too amount
else to speak rarely allows interest in much
others to listening
speak others
Average / Total Marks: (8+6+8+8)/4 7.5 = 8
marks
Model Question Paper

I A Test (CIE)
Programme: Semester: I
Course : Max Marks : 30
Course Code : Duration : 1 Hr 20 minutes
Name of the course coordinator: Test : I/II/III
Note: Answer one full question from each section. One full question carries 10 marks.
Qn.No Question CL CO PO Marks
Section-1
1.a)
b)
c)
2.a)
b)
c)
Section-2
3.a)
b)
c)
4.a)
b)
c)
Section-3
5.a)
b)
c)
6.a)
b)
c)

Course : Max Marks: 100
Course Code: Duration: 3 Hrs
Instruction to the Candidate:
Answer one full question from each section. One full question carries 20 marks.
Qn.No Question CL CO Marks
Section-1
1.a)
b)
2.a)
b)
Section-2
3.a)
b)
4.a)
b)
Section- 3
5.a)
b)
6.a)
b)
Section-4
7.a)
b)
8.a)
b)
Section-5
9.a)
b)
10.a)
b)

Course Code 20EC01P Semester I/II

FUNDAMENTALS OF
Course Title ELECTRICAL & Course Group Core
ELECTRONICS ENGINEERING
No. of Credits 4 Type of Course Lecture & Practice
6Hrs Per Week
78Hrs Per Semester
Prerequisites Basic Science Teaching Scheme (L: T:P) =1:0:2
1. RATIONALE
Fundamentals of Electrical and Electronics Engineering is essential for all streams of diploma
engineering to work in any industry as it covers basic electrical safety,troubleshooting and repairing
of simple electrical systems. Basic knowledge of electrical wiring circuits, protective devices,
electrical machines and basic electronics devices is required to work in any engineering field.
2. COURSE SKILL SET

through various teaching –learning experiences
1. Perform and test domestic wiring
2. Can operate electrical machine
3. Test different electronics devices
1. Expose to different learning tools used in respective labs, Operational safety and Procedure
to be followed in the laboratory.
2. Instructor should give examples from daily routine as well as, engineering/technology
applications on various concepts and principles in each topic so that students are able to
understand and grasp these concepts and principles. In all contents, SI units should be
followed.
3. Activity- Theory - Demonstrate/practice approach may be followed throughout the course so
that learning may be skill and employability based.
4.COURSE OUT COMES

On successful completion of the course, the students will be able to
CO1 Comply with the safety procedures
CO2 Apply the fundamentals of electricity.
CO3 Install and test electrical wiring system.
CO4 Identify and Operate electrical machines, Batteries and UPS.

CO5 Identify and test the different electronic devices.
5. COURSE TOPICS:
Unit Unit Name Hours
No
1 Electrical Safety 6
2 Electrical Fundamentals 15
3 Protective Devices and Wiring circuits 15
4 Electric Machines and Batteries and UPS 15
5 Introduction to Electronic Devices and Digital 27

Electronics
Total 78Hr
6. COURSE CONTENT
The following topics/subtopics is to be taught and assessed in order to develop Unit Skill sets for achieving CO to
attain identified skill sets
Unit skill set
Sl (In cognitive domain) Hours
No On successful completion of Topics/Subtopics Practical L-T-P
the class, the students will
be able to
UNIT-1
Electrical Safety
1 Comply with the Electrical 1. Electrical Symbols 1. Electrical symbols 02-00-
safety 2. Electrical safety related to electrical 04
• Identify Various types of safety signs engineering.
and what they mean 2. Electrical safety
• Demonstrate and practice use of PPE 3. Electrical earthing
• Demonstrate how to free a person
from electrocution
• Administer appropriate first aid to
victims, bandaging, heart attack,
CPR, etc.
• Fire safety, causes and precautionar
y activities.
• Use of appropriate fire extinguishers
on different types of fires.
• Demonstrate rescue techniques
applied during fire hazard, correct
method to move injured people
during emergency
• Inform relevant authority about any
abnormal situation
• Earthing: Types

Ø http://nreeder.com/Flash/sy
mbols.htm
Ø http://bouteloup.pierre.free.fr
/iufm/as/de/house/safety.html
UNIT-2
Electrical Fundamentals
2 1. Identify and select the 1. Describe the sources of electrical 1:0:2
different measuring energy. 1. Connect voltmeter
devices. 2. Electrical current, voltage, emf,
2. Identify different potential difference, resistance with
and ammeter in a
electrical supply systems their SI units. simple circuit.
3. Identify open circuit, 3. Mention the meters used to (Practicing of
close circuit and short measure different electrical identification and
circuit conditions. quantities. connection of
Identification Measuring devices
different meters)
• Ammeter
• Voltmeter
• Wattmeter
• Ohmmeter
• Digital Multimeter
• Megger
• Tong tester
4. Explain supply systems like AC, DC.

Ø http://nreeder.com/Flash/units.ht
m
3 Calculate basic electrical • Relationship between V, I and 1. Measure current, 1:0:2
quantities R. (Ohms law) voltage and analyze
• Behavior of V, I in Series and effective resistance in
Parallel DC circuits.
seriescircuit
• Describe open circuit, close cir
cuit and short circuit 2. Demonstrate effects
of shorts and opens in
a circuit
• http://nreeder.com/Flash/oh
msLaw.htm
4 Connect resistances in 1. Equation to find the effective 1. Determine the 1:0:2
different combination Resistances connected in series equivalent Resistance
2. Equation to find effective Resistances of parallel connected
connected in parallel resistances.
3. Resistances connected series and
parallel combinations
4. Simple problems.
5 Calculate and Ac sinewave: Sinusoidal voltage, Generate and 1:0:2
measurement of different current, amplitude, time-period, demonstrate the
parameters of an AC cycle, frequency, phase, phase measurement of
quantity. difference, and their units. frequency, time period
Ø http://nreeder.com/Flash/freqP
and phase difference of
eriod.htm
Ø http://nreeder.com/Flash/oscill

oscope.htm AC quantity using CRO

and function generator.
6 1. Calculate and measure 1. Electrical work, power and power • Measure the voltage, 1:0:2
electric power and factor current, powerusing
energy • SI units relevant measuring
2. Identify and differentiate • Mention the meters used to instruments in a Single-
Single phase and Three measure them phase load.
phase supply Øhttp://nreeder.com/Flash/powerL
aw.htm
7. 1. Electrical energy 1. Measure single phase

• SI units energy using relevant
• Mention the meters used to measuring instruments
measure them in a Single-phase load.
2. Single phase and Three phase 2. Measure the voltages
supply. in Three phase supply.
UNIT-3
Protective Devices and Wiring circuits
8. 1. Identify and select • Necessity of Protective 1. Wire up and test PVC 1:0:2
Protective Devices for Devices Conduit wiring to
given current and voltage • Various Protective devices control one lamp from
rating and their functions two different places
2. Identify and select the •fuse wire, using suitable
various electrician tools •Glass cartridge fuse protective devices.
• HRC fuse
• Kit-kat fuse
• MCB
• MCCB
• RCCB
• ELCB
• Relay
• Different types of electrician
tools and their function.
• Describe various wiring tools.
• State procedure of care and
maintenance of wiring tools.

9 1. Identify and select 1. Describe different types of wiring 1. Wire up and test PVC 2:0:4
Wiring systems for a systems. Conduit wiring to
given applications • Surface conduit control of 2 sockets and
2. Identify and select the • concealed conduit 2 lamps.
cables used for different • PVC casing capping
current and voltage 2. Wiring systems and their
ratings. applications.
3. Draw the wiring diagram 3. Describe the types of wires, cables
used for different current and voltage
ratings.
10 Estimate and plan Explain Plan and estimate the cost of Prepare the estimation 1:0:2
electrical wiring electrical wiring for one 3m × 3m room and plan
consisting of 2 lamps, 1ceiling fan, 2
three pin sockets.
UNIT-4
Electrical Machines and Batteries and UPS
11 1. Identify the types of Transformer Connect the Single- phase 1:0:2
transformer. • working principle transformer as Step-Up,
2. verify the transformation • Transformation ratio Step-Down transformer
ratio. • Types and applications with and verify the
their ratings transformation ratio.
12 1. Start and run the 1. Induction motor 1. Construct a suitable 2:0:4

induction motor. • Single phase and three phase circuit to start and
2. Troubleshoot DOL/Star- Induction motor. reverse the direction of
delta starter and • Necessity of starters. three phase induction
induction motor • Describe DOL AND STAR-DELTA motor using DOL/ Star-
starters. delta starter.
2. What are different causes and
remedies for a failure of starter and 2. Troubleshoot the DOL/
induction motor. Star-delta starter and
induction motor
13 Select and test the battery Battery Testing Condition of 1:0:2
for a given application • Types of batteries (Lead acid charging and discharging
battery, lithium, sealed of a Lead-acid battery
maintenance free (SMF) battery,
Modular battery).
• Selection criteria of batteries for
different applications.
• Ampere-Hour Capacity.
• Efficiency
14 Select the size of the UPS UPS Sizing of UPS 1:0:2
for a given application • List the types and applications
• Selection criteria of UPS
• Sizing of UPS

UNIT-5
Introduction to Electronic Devices and Digital Electronics
15 Identify and differentiate 1.Compare Conductors, insulators and Determine the value of 1:0:2
Conductors, insulators and semiconductors with examples. resistance by color code
semiconductors. 2. Identification of types and values of and compare it with
resistors-color codes. multimeter readings.
Ø http://nreeder.com/Flash/resisto
r.htm
16 Identify and test PN PN junction diode Identify the terminals of a 1:0:2
junction Diode • Symbol Diode and test the diode
• Characteristics for its condition.
• Diode as switch.
• Types of diodes and ratings
• Applications
17 Build and test bridge Rectifier Construct and test bridge 1:0:2
rectifier circuit • Need for AC to DC conversion rectifiers using semi-
• Bridge rectifier with and conductor diode and
without C filter, rectifier IC.
• Rectifier IC. Compare the waveforms
using CRO.
18 1. Identify and test Transistor (BJT) 1. Identification of 1:0:2
Transistor • Symbol transistor terminals
2. Build and test • Structure and test.
transistor as an • Working principle 2. Construct and test the
electronic switch transistor as an
electronic switch
19. 1. Identify and test • Comparison of analog and digital • Test a Digital IC. 2:0:4
different digital IC signal • Identification and
1. • Digital systems, examples. selection of suitable
• Binary numbers, Boolean ICs for basic gates.
identities and laws. 1. Verify NOT, AND, OR,
• Digital system building blocks: NOR, EXOR and NAND
Basic logic gates, symbols and gate operations (two
truth tables. inputs).
IC-Definition and advantages.
20 Identify and test various 1.Sensors 2. Connect and test an IR 2:0:4
Sensors and actuators. • Concept proximity sensor to a
• Types: Temperature, Pressure, Digital circuit.
Water, Light, Sound, Smoke, • Connect and test a
proximity Sensors, Flow, relay
humidity, voltage, vibration, IR circuit using an Opto-
(Principle/working, ratings/ coupler. (Photo Diode
specifications, cost, and & Transistor)
applications) Refer note
2.Actuators
• Concept
• Types and applications.
• Relay as an actuator.

21 Know the application of • Microcontroller as a • Identify different 1:0:2

Microcontroller and PLC programmable device, and list application
of real-world applications. microcontroller.
• PLC and Their applications. • Identify commercially
(Activity based learning) available PLC
and their
specifications
TOTAL 26-0-
52=78
Hours
7. PRATICAL SKILL EXERCISES

Sl. Practical Out Comes/Practical exercises Unit PO CO L: T:P
No. No. Hrs.
1 • Identify Various types of safety signs and what 1 1,4 1 0:0:2
they meanDemonstrate and practice use of PPE
• Demonstrate how to free a person from
electrocution appropriate first aid to victims,
bandaging, heart attack, CPR, etc.
• Fire safety, causes and precautionary activities.
• Use of appropriate fire extinguishers on different
types of fires.
• Demonstrate rescue techniques applied during fire
hazard.
• Inform relevant authority about any abnormal
situation during fire hazard.
2 • Demonstrate different types of earthing/using 1 1,4 1 0:0:2

videos.
• Prepare a Report on types of Earthing
3 Connect voltmeter and ammeter in a simple 2 1,4 2 0:0:2
circuit. (Practicing of identification and
connection of different meters)
4 1.Determine the equivalent Resistance of series 2 1,4 2 0:0:2
connected resistances.
2.Demonstrate effects of shorts and opens in a
circuit
5 Determine the equivalent Resistance of parallel 2 1,4 2 0:0:2

connected resistances.
6 Generate and demonstrate the measurement of 2 1,4 2 0:0:2
frequency, time period and phase difference of AC
quantity using CRO and function generator.
7 Measure the voltage, current, power using 2 1,4 2 0:0:2
relevant measuring instruments in a Single-
phase load.
8. 1.Measure single phase energy using relevant
measuring instruments in a Single-phase load.
2. Measure the voltages in Three phase supply.

9. Wire up and test PVC Conduit wiring to control one 3 1,4 3 0:0:2
lamp from two different places using suitable
protective devices.
10 2. Wire up and test PVC Conduit wiring to control of 2 3 1,4 3 0:0:2
sockets and 2 lamps.
11 Wire up and test PVC Conduit wiring to control one 3 1,4 3 0:0:2
lamp from two different places.
12 Plan and estimate the cost of electrical wiring for one 3 1,4 3 0:0:2
3mx3m room consisting of 2 CFL 1ceiling fan, 2 three
pin sockets.
13 Connect the Single- phase transformer as Step-Up, 4 1,4 4 0:0:2
Step-Down transformer and verify the
transformation ratio.
14 Construct a suitable circuit to start and reverse the 4 1,4 4 0:0:2
direction of three phase induction motor using
DOL/star-delta starter.
15 Troubleshoot the DOL/Star-delta starter and 4 1,4 4 0:0:2
induction motor
16 Testing Condition of charging and discharging of a 4 1,4 4 0:0:2
Lead-acid battery.
17 Estimate the UPS rating for a computer lab with 50 4 1,4 4 0:0:2
computers/domestic.
18 Determine the value of resistance by color code and 5 1,4 5 0:0:2
compare it with multimeter readings
19 Identify the terminals of a Diode and test the diode 5 1,4 5 0:0:2
for its condition.
20 Construct and test bridge rectifiers using 5 1,4 5 0:0:2
semiconductor diode and rectifier IC. Compare the
waveforms using CRO.
21 Identification of transistor terminals and test. 5 1,4 5 0:0:2
Construct and test the transistor as an electronic
switch.
22 Test an IC. Verify the truth-table AND, OR, NOT logic
gates.
23 Verify the truth-table NAND, NOR, EX-OR, EX-NOR 5 1,4 5 0:0:2
logic gates.
24 Connect and test anIR proximity sensor to a Digital
circuit. NOTE:Any sensor listed in the theory may be
used for condition appropriately.
25 Connect and test a relay circuit using an Optocoupler. 5 1,4 5 0:0:2
(Photo Diode & Transistor)
26 1.Identify MCS-51 variants 5 1,4 5 0:0:2
2.Identify commercially available PLC and their
specifications.
Total 0:0:52
=52Hrs

8.MAPPING OF CO WITH PO
Cognitive Lecture TOTAL
Experimen
Course Outcome PO Level &
CO Mapped R/U/A Practical
Sessions
in Hrs
t
CO1 Comply with the safety PO1, 1-2 A 6
procedures PO4
CO2 Apply the fundamentals of PO1, 3-7 A 15
electricity. PO4
CO3 Install and test electrical wiring PO1, 8-12 A 15
system and protective devices. PO4
CO4 Identify and Operate electrical PO1, 13-17 A 15
machines, Batteries and UPS. PO4
CO5 Identify and test the different PO1, 18-26 A 27
electronic devices. PO4

1 2 3 4 5 6 7
Fundamentals of Electrical CO1 3 0 0 3 0 0 0
and Electronics CO2 3 0 0 3 0 0 0
Engineering CO3 3 0 0 3 0 0 0
CO4 3 0 0 3 0 0 0
Level 3- Highly Mapped, Level 2-Moderately Mapped, Level 1-Low Mapped, Level 0-
Not Mapped

Reference Books:
1. ABC of Electrical Engineering by B. L. Theraja and A. K. Theraja, S Chand Publishers, New Delhi,
2014 Edition.
2. Basic Electrical and Electronics Engineering by S. K. Bhattacharya, Pearson Education India,
2012 Edition.
3. Electronic Devices and Circuits by I. J. Nagrath, PHI Learning Pvt. Ltd., 2007 Edition.
4. Basic Electrical Engineering byV. Mittle and ArvindMittle, McGrawHill Companies, 2005
Edition.
5. The 8051 Microcontroller & Embedded systemsusinkbnnnjbbh bb vvvvg assembly and C
(2ndEdition)–M.A.Mazidi , J.C. Mazidi&R.D.McKinlay ISBN: 81-317-1026-2
6. Programmable Logic controllers, W BOLTON
e-Resources
1. https://www.youtube.com/watch?v=mc979OhitAg&list=PLWv9VM947MKi 7yJ0 FCfzTBXpQU-
Qd3K
2.https://www.youtube.com/watch?v=CWulQ1ZSE3c
3. en.wikipedia.org/wiki/Transformer
2. www.animations.physics.unsw.edu.au//jw/AC.html
3. www.alpharubicon.com/altenergy/understandingAC.htm
4. www.electronics-tutorials
5. learn.sparkfun.com/tutorials/transistors
6. www.pitt.edu/~qiw4/Academic/ME2082/Transistor%20Basics.pdf
7. www.technologystudent.com/elec1/transis1.htm
8. www.learningaboutelectronics.com
9. www.electrical4u.com
10.https://www.youtube.com/watch?v=zLW 7TPf310
11. https://www.youtube.com/watch?v=8PTNjw-hQIM
10.SUGGESTED LIST OF STUDENTS ACTIVITYS for CIE

Note: the following activities or similar activities for assessing CIE (IA) (Any one)
Each student should conduct different activity and no repeating should occur
1 Using suitable meters/ instruments give the practical working circuits to measure
2 Resistance, Current, Voltage, Power and Energy in DC and AC (Single phase) Circuits.
3 List out the different types of wiring systems used in your laboratories or house with
their representation.
4 Mini-Projects: Like preparing extension box, switch box and wiring models,
5 List out the different protective devices used in your laboratories or house with their
ratings.
6 Applications of Electro Magnetic Induction, statically induced and dynamically induced
emf, self and mutual induced emfs.
7 Prepare a report on types of starters and enclosures used for various industrial
applications of AC motors.
8 Types of Cells and Battery maintenance
9 Visit nearby Battery charging shop or show room and prepare a report of the visit.
10 Prepare a report on various types of diodes used for various industrial applications.
11 Prepare a report on various types of sensors and actuators used for various industrial
applications.
12 Mini-Projects: Connect and test a sensor (domain application) to a Digital circuit

Sl.No Assessment Duration Max Conversion
marks
1. CIE Assessment 1 (Written Test -1-theory) 60 20 Average of

- At the end of 3rd week minutes two written
tests
2. CIE Assessment 2 (Written Test -2-theory) 60 20 20
- At the end of 13th week minutes
3. CIE Assessment 3 (Skill test) 3 Hours 100 Average
- At the end of 5th week of three
4 CIE Assessment 4 (Skill test) 3 Hours 100 20 skill
- At the end of 7th week tests
5 CIE Assessment 5 (Skill test) 3 Hours 100 20
- At the end of 9th week
6 CIE Assessment 6 (Student activity) - 20 20

7. Total Continuous Internal Evaluation (CIE) Assessment 60
8. Semester End Examination (SEE) Assessment 3 Hours 100 40

(Practical Test)
100
Total Marks
Note:
1. CIE written test is conducted for 20 marks (Two sections). Each section shall have two
full questions of same CL, CO. Student shall answer one full question (10 marks) from
each section.
2. CIE Skill test is conducted for 100 marks (3 Hours duration) as per scheme of evaluation
and the obtained marks are scaled down to 20 marks
12. SCHEME OF VALUATION FOR SKILL TEST (CIE) & SEE
(CONTINOUS INTERNAL & SEMESTER END EXAMINATION)
Sl. Particulars Marks

No.
1. Identification of meters/ equipment/wires/tools etc. 10
2. Writing Circuit/writing diagram and Procedure* 25
3. Conduction 35
4. Results 10
5 Viva-voce 20
Total 100

RUBRICS FOR ACTIVITY (Example only)
Faculty need to develop appropriate rubrics for respective activity
Dimension Beginning Developing Satisfactory Good Exemplary Student
1 2 3 4 5 Score
Collection Does not collect Collects very Collect much Collects Collects a
of data any limited information; some basic great deal of
information information; but very information; information;
relating to the some relate limited most refer all refer to
topic to the topic relate to the to the topic the topic
topic
Fulfil Does not Performs Performs Performs Performs all
team’s perform any very little very little nearly all duties of
roles & duties assigned duties but duties duties assigned
duties to the team role unreliable. team roles

Shares Always relies Rarely does Usually does Normally Always does
work on others to do the assigned the assigned does the the assigned
equally the work work; often work; rarely assigned work
needs needs work without
reminding reminding having to be
reminded.
Listen to Is always Usually does Talks good; Listens, but Listens and
other talking; never most of the but never sometimes speaks a fair
Team allows anyone talking; show talk too amount
mates else to speak rarely interest in much
allows listening
others to others
speak
Average / Total Marks:
Lab Equipment Requirement

The following are the specification of the apparatus required for FEEE lab and number of apparatus
required for the batch of 20 students.
Sl. No. Name of Equipment and Specification Quantity

Required
1 Dual Channel 30 V, 2 A continuously variable DC Regulated 05 Nos.
Power Supply with Current and Overload Protection
2 +/- 15 V, 2 A, fixed DC Regulated Power Supply 05 Nos.
3 Portable Moving Coil DC Voltmeters Each 05 Nos.
a) 0 - 1 V
b) 0 - 10 V
c) 0 - 30 V
4 Portable Moving Iron AC Voltmeters Each 05 Nos.
a) 0 - 300 V
b) 0 - 600 V
5 Portable Moving Coil DC Ammeters Each 05 Nos.
a) 0 - 100 mA
b) 0 - 1 A
c) 0 - 2 A
6 Portable Moving Iron AC Ammeters Each 05 Nos.
a) 0 - 2 A
b) 0 - 5 A
c) 0 - 10 A
7 Watt-meters Each 02 Nos.
a) 150/ 300V, 2 A, UPF
b) 300/ 600 V, 5/ 10 A, LPF
8 Rheostats – 25 Ohms, 50 Ohms, 150 Ohms, 220 Ohms (all rated Each 05 Nos.
at 3 A)
9 Rheostat Loads s – 1 KW, 230 V 02 Nos.

10 Wire wound Resistors- 5 Ohms 2 Watts, 25 Ohms 5 Watts, 330 Each 05 Nos.
Ohms 2 Watts, 560 Ohms 2 Watts, etc.
11 Soldering Iron 60 W 05 Nos.
13 Single Phase Energy meter 10 A, 230 V, 50 Hz, Digital type 05 Nos.
14 Multi-meter Digital ¾” 06 Nos.

15 Duel Trace Oscilloscope – 30 MHz 02 Nos.
16 Three Phase Induction Motors :1 HP – 440 V 50 Hz,2 HP – 440 V Each 02 Nos.
50 Hz.
17 Three phase DOL, Star-Delta, Auto transformer starter Each 02 Nos.
18 UPS 1 KVA 01 Nos.
19 Battery Lead-Acid type, 140 A-hr and Hydrometers 02 Nos.
Sl. Name of Equipment and Specification Quantity

No. Required
20 I C Trainer kit 05 Nos
21 Digital IC’s 7400, 7402, 7404, 7408, 7486 etc Each 10 Nos.
22 Wooden Wiring board (2x3) ft 10
23 Wiring accessories
2 a) PVC conduit - ¾” - 10 lengths Each 10 Nos.

b) Cap and casing - ¾” - 10 lengths
c) Switches Single Pole- 5A, 230 V
d) Switches two way – 5 A, 230 V
e) 3 Pin Sockets 5A, 230 V
f) Bulb Holders – 5 A, 230 V
g) 3 Pin Plug 5A, 230 V
h) 60 Watts Lamps
i) 100 Watts Lamps
j) 15 W CFL lamps
k) Copper Wires of sizes
1.5 mm2, 2.5 mm2, 4 mm2 – 1 coil each
l) Gang boxes (1+1, 2+1, 2+2)
m) Kit –Kat fuses 5A, 15 A
n) MCB 16 A & 32 A/ 230 V, Single and Double Pole
o) ELCB 16 A & 32 A/ 230 V, Double Pole
p) Neutral link- 16 A, 230 V
q) Screws of assorted sizes
r) Testers

24 Electronic Components Each 10 Nos.

a) Diodes - BY 127 and IN 4001
b) Zener Diodes – 6.2 V, 5.6 V, 7.8 V
c) Relays – solid state Sugar cube type, SPST, Coil 6V,
Power circuit 230 V, 5 A.
d) Spring Boards
e) Bread Boards
f) Tag Boards.
25 Simple PANEL BOARD/ CUBICAL consisting of bus-bars, 1 No
CB/MCB/ELCB, meters, HRC fuses, magnetic contactors,
cables, earthing points.

Course Code 20CS01P Semester I/II
Course Title IT SKILLS Course Group ES/CS
No. of Credits 4 Type of Course Lecture + Practice
6Hrs Per Week

Course Category ES Total Contact Hours
78Hrs Per Semester
Prerequisites Basic Computer Skills Teaching Scheme (L:T:P)= 1:0:2
1. RATIONALE
Information Technology is crucial to the majority of the business and has a great influence on
innovation and engineering. Every branch of engineering and every organization opt for computers
and IT skills for business automation, communication/connectivity, resource planning, work
automation and securing information etc. All engineering diploma students must be conversant with
the basic IT skills which empower them to learn new technologies, adapt to changes, business
development, communication etc.
2. COURSE SKILL SET

through various teaching –learning experiences.
Perform jobs related to web design and maintenance, business process automation tool management,
cyber security and safety and program assistant.
1. Demonstrate the basics of coding.
2. Design and develop web pages that include static and dynamic content.
3. Describe the basic concepts of Cloud and IoT.
4. Express the workflow and business automation
5. Recognize the best practices of Cyber Safety and security.

4. JOB ROLE
SL.NO LEVEL JOB ROLES
1 3 Junior software developer - web.
2 3 Junior Creative Designer/Digital Artist
5. PREREQUISITES
Basic Computer skills (Students without basic computer skills should be taught
STUDENT
basic skills)
TEACHER Computer science faculty with required knowledge of IT Skills.
6. COURSE OUT COMES

On successful completion of the course, the students will be able to demonstrate industry oriented
Cos associated with the above mentioned competency:
Legends: R = Remember; U = Understand; A = Apply and above levels CL = Cognitive Level

(Bloom’s revised taxonomy)

8. INSTRUCTIONAL STRATERGY
These are sample strategies, which teacher can use to accelerate the attainment of the various
course outcomes
1. Lecturer method(L) does not mean only traditional lecture method, but different type of teaching
method and media visual/graphical content that are employed to develop the outcomes
2. Massive Open on-line courses (MOOCS) can be used to teach various topics/subtopics.
3. Online coding platform wherever mentioned.
4. Hands on coding should be practiced.
5. About 15 to 20% of the topics/subtopics which are relatively simpler or descriptive in nature is
to be given to the students for self-directed learning

The following topics/subtopics is to be taught and assessed in order to develop Unit Skill sets for
achieving CO to attain identified skill sets
UNIT Topics/Sub topics Unit skill set/Learning outcomes Hours

NO
(In cognitive domain) L-T-P
1 UNIT 1 - INTRODUCTION TO BASICS OF CODING 05-0-10
1.1 Introduction to computer programming 1. Understand computer

1.2 Algorithms –With sufficient examples programming
1.3 Flowcharts – With sufficient examples 2. Create and write Algorithm for
1.4 Execute simple programs programmable problems.
Note: Below listed or any other suitable 3. Design Flowchart for
online/offline coding platforms should be programmable problems.
used to demonstrate and provide coding 4. Develop simple Android
experience to students. application.
a. https://scratch.mit.edu/

b. https://studio.code.org/projects
Suggested programs are listed in Table 1

1.5 Introduction to Application
development
1.6 Simple android application development (No
knowledge of programming language is required).

Note:
i. The purpose of application development

is to ignite and promote programming
skills.
ii. Application development should be
done using any App builder platforms
such as
iii. MITApp Inventor:
https://appinventor.mit.edu/
iv. Thunkable: https://thunkable.com/
v. ibuildapp: https://ibuildapp.com/
vi. The student should be introduced to the
android application development
environment for further research and
learninghttps://developer.android.com/
1.7 Activity: create a simple Android
application (Unique for each student)

publish on the learning management
system.
2 UNIT 2 - DESIGN AND DEVELOP WEB PAGES 10-0-20
2 2.1 Basic web technologies 1. Understand and examine basic

§ Browser web technologies
§ Web –Server 2. Creating static web pages
§ Client-Server Model 3. Formatting Webpages with
§ URL cascading style sheets (CSS)
§ SEO techniques 4. Creating Dynamic web pages
§ Domain names and domain name system. with JavaScript
2.2 Creating Web-pages with HTML5 - Static

web pages. 5. Creating and launching

§ Introduction, Editors dashboard based personal
§ Tags, Attributes, Elements, Headings website.
§ Links, Images, List, Tables, Forms
§ Formatting, Layout, Iframes.
2.3 Formatting web pages with style sheets
(CSS3).
§ Introduction to CSS
§ Inline CSS, Internal CSS, Classes and
IDs
§ div, Color, Floating, Positioning
§ Margins, Padding, Borders
§ Fonts, Aligning Text, Styling Links
2.4 Creating a web page dynamic using
JavaScript.
§ Dynamic web page and Introduction
to JS
§ Basic syntax
§ Functions
§ Events
Note: Refer https://www.w3schools.com
2.6 Creating dashboards in websites.
2.6 Activity: Personal website design and
launch with a free platform or Create a
Blogging website.
§ Online platforms (Learning and
executing)
§ https://www.w3schools.com/
§ https://studio.code.org
§ https://www.khanacademy.org
Note:
1) The student must be introduced to
website development platforms -
worldpress.com.
2) The student must be made familiar

with launching websites.

Certification available:
• HTML - W3schools
• CSS - W3schools
• JavaScript - W3schools
3 UNIT 3 -BUSINESS PROCESS AUTOMATION/ERP 03:0:06
3 3.1 Introduction to business process 1. Identify and examine the needs

automation. of business process automation.
3.2 Organization structure and functions 2. Understand Organization
composition-Properties and applications structure and functions
§ Structure 3. Create and use workflows
§ Types 4. Use Enterprise resource
§ Functional Units planning in workplace.
Note: Students should be made familiar with
organization, types and components of a big
enterprise to make him understand the
working of organization keeping him as part
of org.
3.3 Workflows
§ Introduction
§ Components
§ Use and use cases
Note: Use free and open-source platform to
demonstrate and create workflows.
Example:
https://airflow.apache.org/
https://taverna.incubator.apache.org/
https://trello.com/
https://www.processmaker.com/
3.4 Enterprise resource planning
§ History
§ Evolution
§ Uses of ERP
§ ERP software tools.

Note: The student should be introduced into

Enterprise resource planning software tools
to understand importance of ERP.
Examples:
§ https://erpnext.com/
§ www.bitrix24.com
§ https://www.odoo.com/
3.5 Activity:
§ Project plan for summer internship -
use open source ERP Software
§ Identify different components of
nearby organization with recourse
plan and workflow design.
§ Identify types of ERP software
available with their market share.
4 04-0-8
UNIT 4 - INTRODUCTION TO CLOUD AND IOT CONCEPTS
4.1 Fundamentals of cloud 1. Understand Cloud concepts
4.2 Cloud service models
2. Identify and use Cloud services
§ IaaS (Infrastructure-as-a-Service)
3. UnderstandIoT concepts
§ PaaS (Platform-as-a-Service)
§ SaaS (Software-as-a-Service) 4. Identify IoT applications
4.3 Cloud deployment types
§ Public,
§ Private,
§ Hybrid
§ Community Cloud
4.4 Cloud services:
§ Google Drive - file storage and
synchronization service developed by Google;
§ Google docs- bring your documents to life
with smart editing and styling tools to help
you easily format text and paragraphs;
§ Google Co-lab (Usage of Jupyter Notebook):
Colab notebooks allow you to combine

executable code and rich text in a single

document, along with images, HTML, LaTeX,
and more.
§ Google App Engine: Google App Engine is a
Platform as a Service and cloud computing
platform for developing and hosting web
applications in Google-managed data centers.
Applications are sandboxed and run across
multiple servers.
Note: Above cloud services are not compulsory

for all branches; teacher can recommend
other cloud service based on need of
engineering branch.
4.5 Working of IoT and IoT components (Only

brief introduction and demonstration
through videos)
4.6 Explain concept of Internet of Things with
examples
§ Smart home
§ Smart city
§ Smart farming
Note:
a. Teacher can also select specific area of
work where Things (autonomous
computing devices) could be
interconnected over TCP/IP to establish
IoT.
b. The students should be introduced to the
IoT environment for further research
and study.
Example:
§ https://www.raspberrypi.org/
§ https://www.arduino.cc/

4.7 Activity:
Create your cloud service account and
demonstrate using cloud services.
Identify cloud service provider with respect
to service models and deployment types.
Identify areas where Internet of Things could
bring positive changes.
5 UNIT 5 - CYBERSECURITY AND SAFETY 4-0-8
5.1 Introduction to Cyber security and cyber 1. Identify need for Cyber
safety. security and cyber safety
§ Brief awareness on cyber safety 2. Identify basic security issues in
measures mobile phones and personal
§ Identification of basic security issues in computers
mobile phones and personal computers
3. Examine Importance of
§ Installation of Antivirus software
privacy, Password policy
§ Firewall concepts
4. Implement best practices of
§ Browser settings
cyber safety and security in
§ Importance of privacy and Password
work place
policy (Best practices).
5.2 Common threats - Demonstration
§ Phishing
§ DoS attack
§ Man in the middle attack
§ Eavesdropping
§ Spamming
5.3 Activity
§ Identification of basic security issues in
computers of your college and fixing the
same.
§ Visit nearby government organization.
§ Identify basic cybersecurity issues
and fixing the same
§ Demonstrate the importance of
cybersecurity, password policy, and
cyber safety.

10. SUGGESTED PRACTICAL SKILL EXERCISES

TABLE-I
Unit
Sl. No. Practical Out Comes/Practical exercises PO CO
No.
Write an algorithm for programmable problems
Example for Reference:
1 • Add/subtract two numbers 1 1,4,7 1
• Find the largest/smallest of 3 numbers
• Calculate and print sum of 'N' numbers
Design a flowchart for programmable problems
Example for Reference:
2 Add/subtract two numbers 1 1,4,7 1
Find the largest/smallest of 3 numbers
Calculate and print sum of 'N' numbers
3 Design and create simple game using MIT-scratch/Code.org 1 1,4,7 1
4 Design and create simple android application (MIT App Inventor) 1 1,4,7 1
Design and create webpage for displaying your poem (Title,
5 2 1,4,7 2
header, paragraph, formatting tags)
Design and create webpage for your wish list (What you want to
6 do). Also list challenges and opportunities along with images to 2 1,4,7 2
present your dreams (List ordered and unordered, Image, table)
Design and create webpage using HTML and CSS about an
7 2 1,4,7 2
awesome animal (Use necessary CSS tags)
Design and create web page for a travel book/recipe book with
8 2 1,47 2
more than 3 pages, table to list places/recipes (iframe, hyperlink)
Design and create web page with JavaScript to design a simple
9 calculator to perform the following operations: sum, product, 2 1,4,7 2
difference and quotient
10 Design and create a personal webpage with dashboard 2 1,4,7 2
Design and create web page about advantages of business process
11 2,3 1,4,7 2,3
automation with respect to your branch of engineering

Create a workflow for education loan approval in bank/diploma

12 3 1,4,7 3
admission process (Use any tool)
Demonstrate ERP with ERPNext Demo for manufacturing, retail
13 3 1,4,7 3
and service sector (Use any other ERP tools)
Create user account and demonstrate use of Google drive, Google
14 docs, Google Co-lab (Usage of Jupyter Notebook) 4 1,4,7 4
1.1 Demonstrate Internet of Things using with examples

a. Smart home
b. Smart city
15 c. Smart farming 4 1,4,7 4
Note: Teacher can also select specific area of work where Things
(autonomous computing devices) could be interconnected over
TCP/IP to establish IoT.
16 Installation of Antivirus software 5 1,4,7 5
17 Demonstration and hands on browser settings 5 1,4,7 5
18 Demonstration and hands on privacy settings and password policy 5 1,4,7 5
Demonstration of common security threats (using videos)
a. Phishing
b. DoS attack
19 5 1,4,7 5
c. Man in the middle attack
d. Spamming
e. Virus
The suggested practical activities (TABLE-I) in this section are demonstrated for the attainment of
the competency. These practical activities can also be used for the student assessment in portfolio
mode for awarding CIE marks. The lecturer can enhance the competency level of the students
by sketching more practical exercises.
NOTES:
1. It is compulsory to prepare log book/record of exercises. It is also required to get each exercise
recorded in logbook, checked and duly dated signed by the teacher
2. Student activities are compulsory and are also required to be performed and noted in logbook.
3. Student activity is compulsory and part of skill assessment. The activity enable student to
explore the course, help student to demonstrate creativity & critical thinking.
4. Student activity report is compulsory part to be submitted at the time of practical ESE
5. Term work report is compulsory part to be submitted at the time of practical ESE.
6. Student activity and student activity reports must be uploaded to Learning management
system.
7. For CIE, students are to be assessed for Skills/competencies achieved.

COURSE CO’S PROGRAMME OUTCOMES (PO’S)
1 2 3 4 5 6 7
IT SKILLS CO1 3 0 0 3 0 0 3
CO2 3 0 0 3 0 0 3
CO3 3 0 0 3 0 0 0
CO4 3 0 0 3 0 0 3
CO5 3 0 0 3 0 0 0
Mapped
12 SUGGESTED LEARNING RESOURCES

BOOKS
The Art of Programming Through Flowcharts & Algorithms, A. B. Chaudhuri, Firewall
1
Media publication
2 HTML5 Black Book, by Publishing company Limited. Kogent Learning Solutions Inc.
3 “World Wide Web design with HTML”, Xavier, Tata McGraw-Hill
Internet of Things – A Hands on Approach, By ArshdeepBahga and Vijay Madisetti
4
Universities Press, ISBN: 9788173719547
URL’S
1 https://scratch.mit.edu
2 https://studio.code.org
3 http://ai2.appinventor.mit.edu
4 https://www.w3schools.com
5 https://www.tutorialspoint.com/javascript/index.htm
6 https://www.geeksforgeeks.org/html-tutorials/
7 Android
https://developer.android.com
8 https://www.khanacademy.org
Tools for Web Development
9
a. https://www.wix.com

b. https://atom.io/
c. https://www.openelement.com/
d. https://www.layoutit.com
13. SUGGESTED LIST OF PROPOSED STUDENTS ACTIVITY
Note: Refer activities mentioned in DETAILS OF COURSE CONTENT table
SL.N ASSESSMENT DURATIO MAX CONVERSION

O N MARKS
(in
minutes)
1 CIE Assessment 1 ( Written Test -1 TH) - 60 20 Average of
At the end of 3 d week two written
2 CIE Assessment 2 (Written Test -2 TH) - 60 20 tests
3 CIE Assessment 3 (Skill Test) - At the end of 3 hrs 20 Average of
5 week three skill test
4 CIE Assessment 4 (Skill Test) - At the 3 hrs 20 20
end of 7 week
5 CIE Assessment 5 (Skill Test) - At the end of 3 hrs 20
9 week
6 CIE Assessment 6 (Student activity)- At the - 20 20
end of 11 week
8 Semester End Examination (SEE) 3 hrs 100 40
Assessment (Practical Test)
TOAL MARKS 100
Note: CIE written test is conducted for 20 marks (Two sections). Each section shall have two full
questions of same CL, CO. Student shall answer one full question from each section.


RUBRICS FOR ACTIVITY (Example Only)
Appropriate rubrics shall be developed by the concerned faculty
Dimensio Poor Below Average Good Exemplary Student
n Average Score
4 8 12 16 20
Concept Does not collect Collects very Collect much Collects some Collects a great 8
any information limited information; basic deal of
relating to the information; but very information; information; all
concept some relate to limited relate most refer to refer to the
the concept to the concept the concept concept
Design Design is not Design is poor Design Design & Design 6
acceptable/very and not well Fallowed convey both considered all
poorly structured structured. layout content and aspect of
samples and context concept,
well concept and
structured presentation
(UI)
Creativity Very little Creativity in Creativity in Creativity in Creative 8
creativity in concept or concept concept concept,
design/impleme design or /design/impl /design/imple content,
ntation implementatio ementation mentation presentation
n which and
complements implementation
each other
Impleme Poorly Partially Implemented Product convey Product is 8
ntation implemented implemented on time with both content creative with
results and context easy-to-use UI,
(content) structure

16. RUBRICS for Skill Test Evaluation (Both for CIE & SEE)
Sl No Parameter to be Observed Marks

Allotted
1 Design-Written
Skill Test 1: Algorithm / Flowchart/Visual Design 30
Skill Test 2: Web site visual design
Skill Test 3: Work flow or Project plan or cyber security
plan or Cloud service Concept
2 Implementation 50
Skill Test 1: Android application
Skill Test 2: Web site / Web pages
Skill Test 3: Create or use cloud service account or
Cyber safety and security- Antivirus
Installation or browser settings
3 Appeal and Presentation 20
Total 100
17. SYSTEM REQUIREMENTS:
Sl. No. Specification Quantity

1. Computers with HD Graphics Card 20
2. Software: GIMP, KRETA, BLENDER, PHOTOSHOP or any -
other relevant open-source software.
3. Internet Connectivity -
Note: Above specification is for a batch of 20 students

Course Code 20AU01T Semester I

ENVIRONMENTAL
Course Title Course Group Audit
SUSTAINABILITY
2Hrs Per Week
Course Category AU Total Contact Hours
26Hrs Per Semester
Prerequisites Basic Environmental Science Teaching Scheme (L: T:P) = 2:0:0
CIE Marks 50 SEE Marks No
COURSE OBJECTIVES:
Technicians working in industries or elsewhere essentially require the knowledge of environmental
science so as to enable them to work and produce most efficient, economical and eco-friendly finished
products.
1. Solve various engineering problems applying ecosystem to produce eco – friendly products.
2. Use relevant air and noise control methods to solve domestic and industrial problems.
3. Use relevant water and soil control methods to solve domestic and industrial problems.
4. To recognize relevant energy sources required for domestic and industrial applications.
5. Solve local solid and e-waste problems.
COURSE OUTCOMES:
At the end of the course student will be able to know:
CO1 Importance of ecosystem and terminology.
CO2 The extent of air pollution, effects, control measures and acts.
CO3 The extent of noise pollution, effects, control measures and acts.
CO4 The water and soil pollution, effects, control measures and acts
CO5 Different renewable energy resources and efficient process of harvesting.
CO6 Solid Waste Management and Environmental acts.

COURSE CONTENT:
Marks: 15 Unit-1 Ecosystem Allotted Hrs: 03
Structure of ecosystem, Biotic & Abiotic components, Aquatic (Lentic and Lotic) and terrestrial ecosystem. Global
warming - Causes, effects, Green House Effect, Ozone depletion.
Marks: 20 Unit-2Air Pollution Allotted Hrs: 03
Air pollution, Natural and manmade sources of air pollution, Effects of air pollution. Air Pollutants and Types.
Control of air pollutants by Cyclone separator and Electrostatic Precipitator, Air (prevention and control of
pollution) act 1981
Marks: 10 Unit-3 Noise Pollution: Allotted Hrs: 02
Noise pollution: sources of pollution, measurement of pollution level, Effects and Control of Noise pollution, Noise
pollution (Regulation and Control) Rules, 2000
Marks: 20 Unit- 4Water and Soil Pollution: Allotted Hrs: 06
Water pollution and Sources of water pollution, Types of water pollutants, Characteristics of water
pollutants,control measures of water pollution.
Definition and list unit operations in water and Wastewater Treatment process, Water (prevention and control of
pollution) act 1974, Water conservation – Importance of Rainwater Harvesting.
Soil pollution, Causes, Effects and Preventive measures of Soil Pollution due to Excessive use of Fertilizers,
Pesticides and Insecticides
Marks: 20 Unit-5 Renewable sources of Energy Allotted Hrs: 07
Solar Energy: Basics of Solar energy. Definition and advantages of advanced solar collectors. Solar water heater
and Solar stills and their uses.
Biomass: Overview of biomass as energy source. Thermal characteristics of biomass as fuel.
Wind energy: Current status and future prospects of wind energy. Wind energy in India.
Need of new Energy sources, Different type’s new energy sources. Environmental benefits of New Energy
Sources-Hydrogen energy, Ocean energy resources, Tidal energy conversion.
Marks: 15 Unit-6 Solid Waste Management and Environmental Allotted Hrs: 05
Acts
Solid waste generation, Sources and characteristics of Municipal solid waste, Solid Waste Management rules
2016- 3R in SWM.
E- Waste generation, Sources and characteristics, E waste management rules 2016
Plastic Waste generation, Sources and characteristics, Recycled plastic rules 2016
Importance of Environment (protection) act 1986
Occupational health and safety measures.

Contact
Unit No & Name Detailed Course Content CO PO
Hrs
Structure of ecosystem, Biotic & Abiotic components, Aquatic
CO1 1,5,7 1
1. (Lentic and Lotic) and terrestrial ecosystem.
Ecosystem Global warming - Causes, effects. CO1 1,5,7 2
Green House Effect, Ozone depletion - Causes, effects CO1 1,5,7 3
Air pollution, Natural sources of air pollution, Man Made
CO2 1,5,7 4
sources of air pollution
Air pollutants and Types, Effects of Particulate Pollutants and
2. CO2 1,5,7 5
control by Cyclone separator
Air and Pollution
Effects of Particulate Pollutants and control by Electrostatic
Precipitator, Air (prevention and control of pollution) act CO2 1,5,7 6
1981.
Noise pollution: sources of pollution, Measurement of Noise
CO3 1,5,7 7
3. pollution level.
Noise Pollution Effects and Control of Noise pollution.
CO3 1,5,7 8
Noise pollution (Regulation and Control) Rules, 2000
Sources of water pollution. Types of water pollutants,
CO4 1,5,7 9
Characteristics of water pollutants.
Control measures of water pollution. CO4 1,5,7 10
Definition and list unit operations in water and Wastewater
4.
Treatment process, Water (prevention and control of CO4 1,5,7 11
Water and Soil
pollution) act 1974.
Pollution:
Water conservation – Importance of Rainwater Harvesting CO4 1,5,7 12
Soil pollution, Causes and Effects due to Fertilizers, Pesticides
CO4 1,5,7 13
and Insecticides
Preventive measures of Soil Pollution due to Excessive use of
CO4 1,5,7 14
Fertilizers, Pesticides and Insecticides.
Solar Energy: Basics of Solar energy.
CO5 1,5,7 15
Solar collectors and advantages of Advanced solar collectors.
Solar water heater, Solar stills and their uses. CO5 1,5,7 16
Biomass: Overview of biomass as energy source. Thermal
17
characteristics of biomass as fuel.
Wind energy: Current status and future prospects of wind
energy. CO5 1,5,7 18
5.
Wind energy in India.
Renewable
Need of new Energy sources, Different type’s new energy
sources of Energy
sources.
CO5 1,5,7 19
Environmental benefits of New Energy Sources-Hydrogen
energy
Environmental benefits of New Energy Sources- Ocean energy
CO5 1,5,7 20
resources
Environmental benefits of New Energy Sources-Tidal energy
CO5 1,5,7 21
conversion.
6. Solid waste generation, Sources, Characteristics of solid waste
CO6 1,5,7 22
Solid Waste Solid Waste Management rules 2016
Management and E- Waste generation Sources and characteristics,
CO6 1,5,7 23
Environmental E waste management rules 2016
Acts Plastic Waste generation Sources and characteristics,
CO6 1,5,7 24
Plastic Waste Sources and characteristics

Recycled plastic rules 2016, Importance of Environment

CO6 1,5,7 25
(protection) act 1986,
Occupational health and safety measures. CO6 1,5,7 26
Total 26
References:
(a) Suggested Learning Resources:
Books:
1. S.C. Sharma & M.P. Poonia, Environmental Studies,Khanna Publishing House,New Delhi
2. C.N. R. Rao, Understanding Chemistry, Universities Press (India) Pvt. Ltd., 2011.
3. Arceivala, Soli Asolekar, Shyam, Wastewater Treatment for Pollution Control and
Reuse, Mc-Graw Hill Education India Pvt. Ltd., New York, 2007, ISBN:978-07-062099.
4. Nazaroff, William, Cohen, Lisa, Environmental Engineering Science, Willy, New York, 2000,
ISBN 10: 0471144940.
5. O.P. Gupta, Elements of Environmental Pollution Control, Khanna Publishing House, New
Delhi
6. Rao, C. S., Environmental Pollution Control and Engineering, New Age International
Publication, 2007, ISBN: 81-224-1835-X.
1. Rao, M. N.Rao, H.V.N, Air Pollution, Tata Mc-Graw Hill Publication, New Delhi, 1988, ISBN: 0-
07- 451871-8.
2. Frank Kreith, Jan F Kreider, Principles of Solar Engineering, McGraw-Hill, New York ; 1978,
ISBN: 9780070354760.
7. Aldo Vieira, Da Rosa, Fundamentals of renewable energy processes, Academic Press Oxford,
UK; 2013. ISBN: 9780123978257.
3. Patvardhan, A.D, Industrial Solid Waste, Teri Press, New Delhi, 2013, ISBN:978-81-7993-502-
6
4. Metcalf & Eddy, Wastewater Engineering, Mc-Graw Hill, New York, 2013, ISBN: 077441206.
5. Keshav Kant, Air Pollution & Control, Khanna Publishing House, New Delhi (Edition 2018)
(b) Open source software and website address:

1) www.eco-prayer.org
2) www.teriin.org
3) www.cpcp.nic.in
4) www.cpcp.gov.in
5) www.indiaenvironmentportal.org.in
6) www.whatis.techtarget.com
7) www.sustainabledevelopment.un.org
8) www.conserve-energy-future.com
Teachers should use the following strategies to achieve the various outcomes of the course.
• Different methods of teaching and media to be used to attain classroom attention.
• Massive open online courses (MOOCs) may be used to teach various topics/subtopics.
• 15-20% of the topics which are relatively simpler or descriptive in nature should be given to the
students for self-learning and assess the development of competency through classroom
presentations.
• Micro-projects may be given to group of students for hand-on experiences

• Encouraging students to visit sites such as Railway station and research establishment around the
institution.
Mapping of Course Outcomes with Programme Outcomes
CO Course Outcome PO Cognitive Theory Allotted marks for TOTAL
Mapped Level Sessions CIE on cognitive
In Hrs levels
R/U/A R U
CO1 Importance Of ecosystem 1,5,7 R, U 03 02 02 04
and terminology
CO2 The extent of air pollution, 1,5,7 R, U 03 03 02 05
effects, control measures
and acts.
CO3 The extent of noise 1,5,7 R, U 02 03 02 05
pollution, effects, control
measures and acts.
CO4 The water and soil 1,5,7 R, U 06 03 02 05
pollution, effects, control
measures and acts
CO5 Different renewable energy 1,5,7 R, U 07 03 02 05
resources and efficient
process of harvesting.
CO6 Solid Waste Management 1,5,7 R, U 05 02 04 06
and Environmental acts.
Total Hours of instruction 26 30
R-Remember; U-Understanding.
Level of Mapping PO’s with CO’s
Course Programme Outcomes (PO’s)

CO’s 1 2 3 4 5 6 7
CO1 3 0 0 0 2 0 1
CO2 3 0 0 0 2 0 1
CO3 3 0 0 0 2 0 1
Environmental Science
CO4 3 0 0 0 2 0 1
CO5 3 0 0 0 2 0 1
CO6 3 0 0 0 2 0 1
Mapped
Method is to relate the level of PO with the number of hours devoted to the CO s which maps the given PO.
If >50% of classroom sessions related to the CO are addressing a particular PO, it is considered that PO is mapped at Level 3
If 30 to 50% of classroom sessions related to the CO are addressing a particular PO, it is considered that PO is mapped at Level 2
If < 5% of classroom sessions related to the CO are addressing a particular PO, it is considered that PO is considered not mapped i.e. Level
0

Course Assessment and Evaluation Chart
Sl. Assessment Duration Max marks Conversion

No
1. CIE Assessment 1 (Written Test -1 - At the end of 80 minutes 30 Average of
3 d week three written
2. CIE Assessment 2 (Written Test -2) - At the end of 80 minutes 30 tests
7 week 30
3. CIE Assessment 3 (Written Test -3) - At the end of 80 minutes 30
13 week
4 CIE Assessment 4 (MCQ/Quiz) - At the end of 5 60 minutes 20 Average of
week three
5 CIE Assessment 5 (Open book Test) - At the end 60 minutes 20 20
of 9 week
6 CIE Assessment 6 (Student activity/Assignment)- 60 minutes 20
7. Total Continuous Internal Evaluation (CIE) Assessment 50
50
Total Marks
Note:
1. Average marks of Three CIE shall be rounded off to the next higher digit.
2. Assessment of assignment and student activity is evaluated through appropriate rubrics by
the respective course coordinator. The secured mark in each case is rounded off to the next
higher digit.
MANDATORY STUDENT ACTIVITY: EACH STUDENT HAS TO SELECT ANY ONE OF THE LISTED
1. Students chose one thing to reduce at home each week and write journal entries about their
successes and challenges implementing the change. In class, they form groups and create "Do
You Know?" posters.
2. Students pretend they are architects and come up with a series of design changes to make
their school more environmentally friendly. They then grade their projects according to a
rubric.
3. A presentation for Green Team Club members to introduce themselves and the purpose of
their club. They explain how to use their new recycling bins, in the classroom and in the
cafeteria.
4. Ever wonder what's in your school's waste? This hands-on activity helps students assess their
school's waste in order to think of ways to reduce it. The results can be incorporated into the
school's recycling plan.
5. How do we measure climate change? What activities contribute to climate change?

6. 6. Start a compost or worm bin. Composting is a hands-on way to learn about important life
science concepts such as ecosystems, food webs and biodegradation. Students experience
how worms and other decomposers recycle fruits and vegetable scraps into compost. Use the
compost in your college garden! Have green team students make up a skit and present details
about the new composting program to all classrooms. Have them make signs for the bins
(compost, recycle, and landfill), monitor the waste collection at lunchtime, cart the food waste
to the compost, and decide how and where the compost will be used.
7. Paint posters and decorate bulletin boards or the doors to the cafeteria with waste- free lunch
messages to announce or support a waste-free event, and have students vote for their favorite
poster.
8. Conduct a classroom audit to identify waste and look for ideas to reduce and reuse. Empower
the student to set goals, search for solutions and review progress.
9. Go on a field trip. Visit your local landfill, recycling centre, or a nearby composing facility
where the students can see first-hand what is happening to waste and learn about the
lifecycle of waste and its effect on the environment.
10. Home energy audit:Have students make a list of all the appliances and light bulbs in their
house. How much energy does their house use if all the lights are on for 4 hours per day? If
their appliances are on for 2 hours per day? How much energy could they save if they
switched to energy-efficient appliances or lightbulbs?
11. Use recycled material in art projects:Recycled materials can make beautiful art projects such
as jewelry, planters, and bird houses. Incorporating materials that would otherwise be
thrown away into art projects can show your students how to find new uses for these items.
12. Life cycle :One way to show students what happens when you put something in the trash
versus recycling or reusing the object is to do a life cycle analysis. This is a flow chart that
shows the environmental impacts of an object, from extracting the raw materials to
decomposition and everything in between. When something is put in the trash instead of
being reused or recycled, the life cycle assessment will show a bigger environmental impact.
When something is reused or recycled, the environmental impact is less because raw
materials don’t need to be extracted to create something new.


I A Test (CIE)
Programme : Semester: I
Course : Max Marks : 30
Course Code : Duration : 1 Hr 20 minutes
Name of the course coordinator: Test : I/II/III
Section-1
1.a)
b)
c)
2.a)
b)
c)
Section-2
3.a)
b)
c)
4.a)
b)
c)
Section-3
5.a)
b)
c)
6.a)
b)
c)

Course Code 20PM01T Semester II

Project Management
Course Title Course Group PM
Skills
No. of Credits 4 Type of Course Activity based study
6 Hrs Per Week (2Theory +4 hrs
Total Contact of classroom activities)
Course Category Theory with Activities
Hours 78 Hrs Per Semester
Prerequisites 10thLevel Mathematics Teaching 4 hrs per week classroom
Scheme sessions dedicated to case studies
& activities
RATIONALE
Project Management is a confluence of Management principles and Engineering subject
area. This course enables the students to develop conceptualisation of Engineering
Management principles and apply the same for their engineering projects, in their domains,
example, Software Development project or Construction Project and so on. The course
integrates three core areas of Planning, Execution and Auditing of Projects.
1. COURSE SKILL SET
Student will be able to:

1. Understand what constitutes a project, Plan for the execution of the project by
breaking into manageable work units, and Prepare necessary project artifacts
2. Track and control the Project while preparing verifiable records for Project
Inspections and Audits
3. Inspect and Audit projects for Milestones or other project completion criteria and
other metrics, Defects and remediation, Project learnings
4. Gain knowledge and develop curiosity on latest technology trends in Project
management

2. COURSE OUT COMES

Apply the concepts of Project Management to real projects which are expressed
CO1
in the form of the Project reports or Engineering drawings
Estimate Project resources needed Time, Material and Effort, and Plan for
CO2
execution
Understand, analyse and assess the risks involved in a project and plan for
CO3 managing them
CO4 Use Project Management Software and processes to track and control Projects
CO5 Conduct inspection of Projects and audit progress and bills
Understand the Digital Technology trends in Project management and concepts

CO6
like Smart cities
3. SUGGESTED SPECIFICATION TABLE WITH HOURS & MARKS
TEACHING MARKS DISTRIBUTION(THEORY)

UNIT
UNIT TITLE HOURS R U A
NO TOTAL
(L-T-P) LEVEL LEVEL LEVEL
1 Introduction 02-00-04 8 8 4 20
2 Project Administration 06-00-12 8 12 20 40
3 Project Lifecycle 04-00-08 8 12 20 40
4 Project Planning, Scheduling 06-00-12 8 12 20 40
and Monitoring
Project Control, Review and
5 06-00-12 8 12 20 40
Audit
6 Digital Project Management 02-00-04 8 8 4 20
Total 26-00- 48 64 88 200
52=78
taxonomy)

The following topics/subtopics is to be taught and assessed in order to develop Unit Skill sets
for achieving CO to attain identified skill sets.
UNIT NO Unit skill set Hours

(In cognitive Topics / Subtopics L-T-P
domain)
1 Introduction Use Basic Science, Maths Introduction and definition, 02-00-
skills to understand Features of a Project, Types of 04
Project management and Projects, Benefits and Obstacles
project planning, in Project Management, Project
execution and control. Management Profession, Role of
Project manager, Consultants,
Project and Operation, Project
Management Process, Project
Scope
2 Project Able to develop WBS, Project Administration, Project 06-00-
Administration PEP and PM processes Team, Project Design, Work 12
for Project with given Breakdown Structure (WBS),
inputs Project Execution Plan (PEP),
Systems and Procedure Plan,
Project Direction,
Communication and Co-
ordination, Project Success
Case Study I
3 Project Use project Project Life Cycle, Phases - 04-00-
Lifecycle administration and Project Planning, Project 08
project lifecycle Execution, Project Closure,
knowledge to Assess and Project Risks, Project Cost Risk
plan for project risk Analysis, Time and Cost
overruns
Case Study 2a
4. Project Able to develop a Project Planning Function, 06-00-
Planning, Project detailed project plan Structure, Project Scheduling, 12
Scheduling and given the inputs on Project monitoring and Project
Project manpower, funds evaluation
Monitoring availability and time
and availability Case Study 2b
Implementation
5.Project Use Project Management Project Control, Problems of
Control, Review lifecycle knowledge to Project Control, Gantt Charts,
and Audit Control project Milestone Charts, Critical Path
parameters, review and Method (CPM), Network 06-00-
audit project Technique in Project Scheduling,
12
performance Crashing Project Duration
through Network, Project
Review, Initial Review,
Performance Evaluation,

Abandonment Analysis, Project

Audit
Case Study 2c
6.Digital Project Understand latest trends Digital Technology trends in

Management of digital technologies Project management, Cloud
impacting the domain of Technology, IoT, Smart cities,
project management and Data and analytics, case studies 02-00-
application of the same 04
in multiple scenario Case study 3
CO Course Outcome PO UNIT CL Sessions TOT

Mapped Linked R/U/A in Hrs AL -
Marks
Understand the concepts of 1, 2, 5, 7 1, 2 R/U/A
Project Management in relation
to real projects which are 06 10
expressed in the form of the
CO1
Project reports or Engineering
drawings
Case Study - I
CO2 Estimate Project resources 1, 2, 3, 7 2, 3 R/U/A
needed Time, Material and 18 20
Effort, and Plan for execution
Case study 2a
CO3 Evaluate the risks involved in a 1,2,3,7 2,3 R/U/A 12 20
project and Plan for managing
them
Case Study - 2a

CO4 Use Project Management 1, 4, 6, 7 4 R/U/A

methods with Software and/or
processes to track and control 18 20
Projects
Case Study 2b
CO5 Conduct inspection of Projects 1, 2, 5, 7 5 R/U/A
and audit progress and bills 18 20
Case Study 2c
CO6 Understand the Digital 1, 5, 7 6 R/U/A
Technology trends in Project
management, and Engineering 06 10
Industries
Case Study 3
78 100
CO’s Programme Outcomes s)

(PO
1 2 3 4 5 6 7
Project Management CO1 3 3 0 0 2 0 1
CO2 3 3 3 0 0 0 1
CO3 3 0 0 3 0 3 1
CO4 3 0 0 3 0 3 1
CO5 3 2 0 0 2 0 1
CO6 3 0 0 0 2 0 2
Not Mapped
These are sample Strategies, which teacher can use to accelerate the attainment of the
1. Explicit instruction will be provided in intervention classes or by using different

differentiation strategies in the main classroom.

2. Lecturer method (L) does not mean only traditional lecture method, but different type of
teaching method and media that are employed to develop the outcomes.
3. Observing the way their more proficient peers use prior knowledge to solve current
challenges and persevere in problem solving will help struggling students to improve
their approach to engaging with rich contextual problems.
4. Topics be introduced always with a reallife example and then answering What, how, why
and when.
5. The teacher is able to show different ways to solve the same problem and encourage the
students to come up with their own creative ways to solve them.
6. In a perfect world, teacher would always be able to demonstrate how every concept can
be applied to the real world - and when that's possible, it helps improve the students'
understanding. When a concept cannot be applied in that manner, we can still share how
it might be applied within mathematics.
SlNo. Author Title of Books Publication/Year

Dr. Lalitha Project Management Himalaya Publishing, 2019
Balakrishnan &
1
Dr. Gowri
Ramachandran
Shailesh Kumar Complete Guide to Digital Apress, 2019
2
Shivakumar Project Management
Project planning, analysis,
3 Prasanna Chandra selection, implementation Tata McGraw Hill
and review
4 Gopala Krishnan Project Management Mcmillan India Ltd.

marks
CIE Assessment 1 Average of three
( Written Test -1) written tests
1 At the end of 3rd week 80 minutes 30
30
CIE Assessment 2
(Written Test -2)
2 At the end of 7th week 80 minutes 30


marks
CIE Assessment 3
(Written Test -3)
CIE Assessment 4 Average of three
(Group Assignment -1)
20
CIE Assessment 5
(Group Assignment -2 )
CIE Assessment 6
(Individual Student
activity/Assignment) At
6 the end of 11th week 60 minutes 20
Semester End
8 Examination (SEE) 3 Hrs 100 50
Assessment (Written Test)
Total Marks 100
Note:
1. SEE (Semester End Examination) is conducted for 100 Marks theory course for a time
duration of 3 Hrs
2. Three CIE (written test), each of 30 marks for a time duration of 80 minutes shall be
conducted. Also, three CIE (MCQ or Quiz/Group Assignment/Individual student
activity or assignment) each of 20 marks for the time duration of 60 minutes shall be
conducted. Any fraction at any stage during evaluation will be rounded off to the next
higher digit
3. Assessment of assignment and student activity is evaluated through
appropriate rubrics by the respective course coordinator. The secured mark in each
case is rounded off to the next higher digit.
10 DETAILED COURSE CONTENT

Unit No DETAILED COURSE CONTENT CONTACT TOTAL
And Name HRS
1.1 Introduction 3

Unit No DETAILED COURSE CONTENT CONTACT TOTAL

And Name HRS
1.2 Meaning of Project
1.3 Definition and No Change Mode
1.4 Features of a Project
1. 6
Introduction 1.5 Types of Projects
1.6 Benefits of Project Management
1.7 Obstacles in Project Management

1.8 Project Management A Profession
1.9 Project Manager and His Role

1.10 Project Consultants
1.11 What is Operation? 3

1.12 Difference between Project and Operation
1.13 What is Process in Project Management and

Process Groups?
1.14 What is Scope? Difference between Project
Group Objectives and
1.15 Project Scope
2. Project 2.1 Essentials of Project Administration 3 18

Administrat 2.2 Project Team
ion 2.3 Project Design
2.4 Work Breakdown Structure (WBS)
2.5 Project Execution Plan (PEP) 6
2.6 Contracting Plan
2.7 Work Packing Plan
2.8 Organisation Plan 3
2.9 Systems and Procedure Plan
2.10 Project Procedure Manual
2.11 Project Diary 3
2.12 Project Execution System
2.13 Project Direction
2.14 Communication in a Project 3
2.15 Project Co-ordination

2.16 Pre-requisites for Successful Project

Implementation
3. Project 3.1 Introduction 6 12
Lifecycle 3.2 Phases of Project Life Cycle
3.3 Project Management Life Cycle General
3.4 Project Planning
3.5 Project Execution
3.6 Project Closure
3.7 Project Risks 3
3.8 Types of Risks: Illustrations
3.9 Risk Assessment Techniques with Illustrations
3.10 Project Cost Risk Analysis 3
3.11 Estimating Time and Cost Overrun Risks
3.12 Organisation/Procedural/Systemic Reasons
for Project Cost Overruns
3.13 Time Overruns
Planning,
Scheduling 4.2 Nature of Project Planning
and
Monitoring 4.3 Need for Project Planning
4.4 Functions of Project Planning

4.5 Steps in Project Planning
4.6 Project Planning Structure
4.7 Project Objectives and Policies
4.8 Tools of Project Planning
4.9 Project Scheduling 6
4.10 Time Monitoring Efforts
4.11 Bounding Schedules
4.12 Scheduling to Match Availability of

Manpower
4.13 Scheduling to Match Release of Funds
4.14 Problems in Scheduling Real-life Projects
4.15 Introduction 3

4.16 Situation Analysis and Problem Definition
4.17 Setting Goals and Objectives
4.18 Generating Structures and Strategies
4.19 Implementation
4.20 What is Project Evaluation? 3
4.21 Why is Project Evaluation Important?
4.22 What are the Challenges in Monitoring and

Evaluation?
Control,
Review and 5.2 Projected Control Purposes
Audit 5.3 Problems of Project Control
5.4 Gantt Charts
5.5 Milestone Charts
5.6 Critical Path Method (CPM) 6
5.7 Construction of a Network
5.8 Network Technique in Project Scheduling
5.9 Crashing Project Duration through Network
5.10 Project Review 3
5.11 Initial Review
5.12 Post Audit
5.13 Performance Evaluation
5.14 Abandonment Analysis
5.15 Objectives of Project Audit 3
5.16 Functions of Project Auditor
5.17 Project Audit Programme
5.18 Difficulties in Establishing Audit Purpose and
Scope
6. Digital 6.1 Digital Technology trends in Project 1 6

Project management
Management
6.2 Cloud Technology, IoT, AR and VR applications 1
in Project management, Smart Cities

6.3 Data Science and Analytics in Project 1

Management
6.4 Case Studies 3
Case Studies:
Please note: The Tutors can either use the following Case studies and activities or Design
on their own, with the overall Learning Outcomes being met.
Case Study I: Residential House – Project Execution Plan
1. Dr. Sunil Kulkarni wants to build a house on his 9000 square feet (90x100) vacant plot
in Bengaluru. His requirements were given below.
i) He lives with his wife, parents and two college going children.
ii) He likes open space around his house and likes to do gardening during free
time
iii) His wife teaches Yoga and about 30 middle aged and old people attend the
daily sessions.
iv) He has a budget limitation of INR 230,00,000 for this project and wants to
present to his wife on their 20th wedding anniversary which is 18 months
away.
v) His parents can not climb stairs and hence prefer a ground floor room
vi) All the rooms should have attached bathrooms
How-ever the Civil contractor who took the work, overshot the time and money available
and hence Dr Sunil was unhappy with the Architect firm who recommended the Contractor.
Task:
• Split the class into groups of three

• Ask them to prepare 2D drawings with Plan, Elevation, Sections and perspectives.
• Prepare the detailed WBS, a Project execution plan and Project communication plan
for contractors
• Estimate the quantities
• Discuss on the possible reasons for delay and methods with which performance to
both time and budget could have been achieved
• Present it in a seminar, with each group getting 5-10 minutes to present their idea.

Case Study 2a:
The Columbus Hospital proposed in Hubli is a 200 bed speciality private hospital for
treatment of Cancer. The hospital will come up on a 12 acre plot between Hubli-Dharwad. A
leading construction company has come forward to complete the hospital works from
concept to commissioning in 9 months. The promoters are willing to spend a premium to
complete the hospital in 9 month time and are not particular about type of construction, ie,
RCC, Steel frame etc. The key requirements are as follows:
i) 200 bed hospital of which 40 are for critical care (ICU), 40 for pre and post
Operative care
ii) 4 Operation Theatres - 2 Major (Minimum 800 SFT each) and 2 minor (minimum
400 sft each)
iii) One full fledged Diagnostic laboratory (1500 Sft)
iv) One 24x7 pharmacy (360 Sft min)
v) Doctors rooms, Nurses enclosures, Change rooms
vi) Office with billing counters (min 2000 sft) for all administrative staff
vii) Wheel chair parking bays, Stretcher parking bays in all floors
viii) One Cafetaria with 50 person capacity
ix) One conference room with Multimedia equipment (300 sft min)
x) Parking for ambulances, 4 wheelers, two wheelers
xi) Reception and enquiry counter
xii) All amenities should be accessible for disabled persons
xiii) Incinerator, Waste storage and disposal area
xiv) Generator and fuel storage area
Discuss
i) The various alternative approaches available to complete the hospital.

ii) Look into National Building Code and BIS standards for arriving at approximate
(+/- 10%) super built-up area required, amenities to be planned
iii) The various phases of the project according to Project lifecycle and durations
iv) Prepare the detailed WBS, Project Organisation required and Project Dairy
template
v) Prepare a Project Plan with risks involved and the risk management plan.
vi) Estimate the cost of time overrun if the project is delayed by 114 calendar days
due to issues with approvals
Case Study 2b:
For case study 2 above, prepare an Implementation Plan using a spreadsheet software.
Discuss

i) What happens if a pandemic affects the project in its 7th Month. How do you
mitigate the possible issues in implementation?
ii) What happens if during the fourth month of projects the client decides to reduce
funds for the month by 50% ?
Case Study 2c:
For case study 2 above, prepare a Critical Path method Chart (CPM) showing all main
activities in the WBS with milestones.
Discuss
i) What happens if the client decides to complete the ground floor roof 15 days
earlier ?
ii) What happens if the client reduces the inflow of project funds by 50% for the
month 4 ?
iii) Write an Audit report for the project at the end of 6th month
Case Study 3:
This will be done as a student activity and has two components.
i) Research on 3D printing in any industry and prepare a three page article

ii) Study usage of Drones in different Industries and evaluate the Cost benefits of
using the same for any one scenario.


I A Test (CIE)
Course: Max Marks: 30
Course Code: Duration: 1 Hr 20 minutes
Name of the course coordinator: Test: I/II/III
Section-1
1.a)
b)
c)
2.a)
b)
c)
Section-2
3.a)
b)
c)
4.a)
b)
c)
Section-3
5.a)
b)
c)
6.a)
b)
c)


Course: Max Marks: 100
Course Code: Duration: 3 Hrs
Instruction to the Candidate:
Answer one full question from each section. One full question carries 20 marks.
Qn.No Question CL CO Marks
Section-1
1.a)
b)
2.a)
b)
Section-2
3.a)
b)
4.a)
b)
Section- 3
5.a)
b)
6.a)
b)
Section-4
7.a)
b)
8.a)
b)
Section-5
9.a)
b)
10.a)
b)

Course Code 20SC02P Semester I/II

Course Title STATISTICS AND Course Group Core
ANALYTICS
No. of Credits 4 Type of Course Lecture and practice
Course Category Practice Total Contact 6 Hrs Per Week
Hours
78 Hrs Per Semester
Prerequisites 10TH LEVEL Teaching Scheme (L: T:P)-1:0:2
MATHEMATICS
RATIONALE
Statistics and analytics help the learner to use the proper methods to collect the data,
employ the correct analyses, effectively present the results and conduct research, to be
able to read and evaluate journal articles, to further develop critical thinking and analytic
skills, to act as an informed consumer and to know when you need to hire outside
statistical help. The python language is one of the most accessible programming languages
available because it has simplified syntax and not complicated, which gives more
emphasis on natural language.
COURSE OUT COMES

CO1 Understand the tools of data collection, classification and cleaning of data.
CO2 Able to summarize the given statistical data
CO3 Understand the measure of location and dispersion of data.
CO4 Learn the basics of Python programming.

DETAILS OF COURSE CONTENT

Sets for achieving CO to attain identified skill sets.
Unit skill set Hours
UNIT NO Topics/Subtopics
(In cognitive domain) L-T-P
Ø Able to collect a Definition of data and
statistical data. classification (qualitative
Ø Able to distinguish quantitative discrete and
the data types. continuous data).
UNIT-1 Ø Understands the b Data collection tools
usage of data iv) Questionnaires.
STATISTICAL collection tools v) Survey. 4-0-8
DATA
Ø Able to specify vi) Interviews.
COLLECTION AND
problem statement vii) Focus group discussion.
TYPES for data collection 1.3 Data cleaning.
Ø Able to collect data
pointing the root
cause of the
problem statement.
Ø Sketches bar, pie a Descriptive statistics
and histograms on viii)
Microsoft Excel Datatabulation(frequency
spread sheet. table
Ø Sketches frequency ix) Relative frequency table.
curve and b Grouped data
frequency polygon x) Bar graph
for the data set on xi) Pie chart
UNIT-2 Microsoft Excel xii) Line graph
spread sheet. 8-0-
SUMMARIZATION xiii) Frequency polygon 16
OF DATA Ø Sketches bar, pie
xiv) Frequency curve
and histograms on
xv) Relative frequency
Microsoft Excel
spread sheet. polygon
Ø Sketches frequency xvi) Histograms
curve and xvii) Box plot
frequency polygon xviii) Leaf-stem plot
for the data set on To be done in Microsoft excel.
Microsoft Excel
spread sheet.
UNIT-3 Ø Able to determine a Determination of central
the descriptive tendencies Range, Mean, Mode and 6-0-
MEASURE OF
statistical variables Median for the data in Microsoft 12
LOCATION AND
using Microsoft excel.
DISPERSION b Determination of absolute
Excel.

Ø Able to determine measures of dispersion for data

the absolute like range quartile deviation,
measures of mean deviation, standard
dispersion of the deviation and variance in
given data set. Microsoft Excel.
Ø Explain the symmetry c Skewness and kurtosis graphs in
and asymmetry of the Microsoft excel and
distributed data. interpretations of results.
Ø Able Install and run the 4.1 Introduction to PYTHON.
Python interpreter. 4.2 Syntax of PYTHON.
Create and execute 4.3 Comments of PYTHON.
UNIT-4 Python programs. 4.4 Data types of PYTHON.
Ø Understand the 4.5 Variables of PYTHON.
INTRODUCTION
concepts of file I/O. 4.6 If-else in PYTHON.
TO 8-0-
Ø Able to read data from 4.6 Loops in PYTHON.
PYTHON 4.7 Arrays and functions in PYTHON. 16
a text file using Python.
PROGRAMMING Ø Learn variable
declarations in Python.
Ø Learn control
structures.
Ø Learn loop constructs.

SL Unit
Practical outcomes/Practical exercises PO CO L:T:P
NO no
Prepare a questionnaire (closed end) containing 25
1 questions for a specified problem statement: for example 1 1,2,4,5,7 1 0:0:2
experience of an individual in a restaurant.
Prepare a Google form for a specified problem statement
2 to collect the dataset. (for example questionnaire to 1 1,2,4,5,7 1 0:0:2
conduct online quiz)
Send out a survey on your problem statement to number
3 of 50 1 1,2,4,5,7 1 0:0:2
(By Google forms) and collect the data.
Remove duplicate or irrelevant observations. Remove
unwanted observations from the dataset provided,
4 1 1,2,4,5,7 1 0:0:2
including duplicate observations or irrelevant
observations.
In Microsoft Excel spread sheet draw the frequency
5 distribution table for the given data (data set should 2 1,2,4,5,7 2 0:0:2
contain minimum 50 data).
In Microsoft Excel spread sheet draw the relative
6 frequency distribution table for the given data (data set 2 1,2,4,5,7 2 0:0:2
should contain minimum 50 data).
Using Microsoft Excel spread sheet plot bar graph for the
data collected from 100 people( for example, conduct a
7 survey on the favorite fruit of a person in your 2 1,2,4,5,7 2 0:0:2
locality(restricting to 5 to 6 fruits). Explain the bar graph
with minimum 30 words.
Using Microsoft Excel spread sheet plot pie chart for the
data collected from 50 people( for example, conduct a
8 2 1,2,4,5,7 2 0:0:2
survey on the smokers with respect to their ages in your
locality. Explain the pie chart with minimum 30 words.
Using Microsoft Excel spread sheet draw a line graph for
9 2 1,2,4,5,7 2 0:0:2
the given dataset.
Using Microsoft Excel spread sheet draw frequency
polygon and frequency curve for the data collected from
50 people. (For example, marks obtained by the students
10 2 1,2,4,5,7 2 0:0:2
in your class in 5 subjects in previous examination).
Explain your observations from the graph in minimum 30
words.
Using Microsoft Excel spread sheet construct a box plot
for the given dataset. (For example dataset can be the
11 2 1,2,4,5,7 2 0:0:2
number of passengers in a flat form at different time in a
day).
Using Microsoft Excel spread sheet construct a leaf plot
12 for the given dataset. Explain the graph with minimum 30 2 1,2,4,5,7 2 0:0:2
words.

Using Microsoft Excel spread sheet find the Mean, Mode

13 and Median for the data (univariate data) given and also 3 1,2,4,5,7 2 0:0:2
represent them in a Histogram.
Generate a 50 random data sample (even and odd
14 number dataset) using Microsoft Excel spread sheet 3 1,2,4,5,7 2 0:0:2
and determine the range and Quartiles.
Collect the current yield of a crop from 50 different
persons (problem statement can be changed according
to priorities of the tutor) in your locality and determine 0:0:2
15 3 1,2,4,5,7 3
mean deviation and Quartile deviation in Microsoft
excel spread sheet and brief your inference with less
than 30 words.
Collect the data of any 2 livestock population from 50
different houses in your locality (problem statement
can be changed according to priorities of the tutor) and
16 3 1,2,4,5,7 3 0:0:2
determine standard deviation for both the two
separately in Microsoft excel spread sheet and brief
your inference with less than 30 words.
Collect the data of two wheeler (with a rider and a
pillion) crossing a busy junction in your locality in the
peak hours (problem statement can be changed 0:0:2
17 3 1,2,4,5,7 3
according to priorities of the tutor) and determine the
variance of the data in Microsoft excel spread sheet and
brief your inference with less than 30 words.
Using Microsoft Excel spread sheet draw a Skewness
0:0:2
18 graph and kurtosis graph for randomly generated 3 1,2,4,5,7 3
dataset.
Write a python program to add 2 integers and 2 strings 0:0:2
20 4 1,2,4,5,7 4
and print the result.
Write a python program to find the sum of first 10 0:0:2
21 4 1,2,4,5,7 4
natural numbers.
Write a python program to find whether the number is 0:0:2
22 4 1,2,4,5,7 4
odd or even.
Write a python program to find the variance and 0:0:2
23 4 1,2,4,5,7 4
standard deviation for the given data..
Write a python program to display student marks from 0:0:2
24 4 1,2,4,5,7 4
the record.
Write a python program to create a labeled bar graph 0:0:2
25 4 1,2,4,5,7 4
using matpoltlib. pyplot.
Write a python program to create a labeled pie chart
26 4 1,2,4,5,7 4 0:0:2
using matpoltlib. pyplot.
0:0:52=5
Total Hours
2

MAPPING OF CO WITH PO
Experi Tutorial &

Cognitive
PO ment Practical
TOT
CO Course Outcome Linked Level
Mapped Sessions AL
R/U/A
in Hrs.
CO1 Understand the tools of data

collection, classification and 1,2,4,5,7 1-4 A 12 12
cleaning of data.
CO2 Able to summarize the given
1,2,4,5,7 5-12 A 33 33
statistical data
CO3 Understand the measure of
1,2,4,5,7 13-18 A 12 12
location and dispersion of data.
CO4 Learn the basics of Python
1,2,4,5,7 19-26 A 21 21
programming.
78 78
Programme Outcomes (PO’s)

Course CO’s
1 2 3 4 5 6 7
CO1 3 3 0 3 3 0 3
CO2 3 3 0 3 3 0 3
Statistics & Analytics
CO3 3 3 0 3 3 0 3
CO4 3 3 0 3 3 0 3
Level 3- Highly Mapped, Level 2-Moderately Mapped, Level 1-Low Mapped,
Level 0- Not Mapped

SUGGESTED LEARNING RESOURCES:

1. Statistical Analysis with Excel For Dummies (For Dummies Series) Paperback
Import, 9 April 2013 by Joseph Schmuller (Author)
2. https://www.brianheinold.net/python/A Practical Introduction to Python Progra
mmingHeinold.pdf
3. http://www.bikeprof.com/uploads/9/0/6/5/9065192/excel stats handout npl.pdf
4. https://adminfinance.umw.edu/tess/files/2013/06/Excel-Manual1.pdf
5. https://www.brianheinold.net/python/A Practical Introduction to Python Progra
mmingHeinold.pdf
6. Introduction to Python programming for beginners by Vivian Baily Kindle edition.
7. PYTHON PROGRAMMING: Python programming: the ultimate guide from a beginner
to expert by Clive Campbell.
8. Open source for python: https://hub.gke2.mybinder.org/user/jupyterlab-
jupyterlab-demo-zfkdwy4y/lab
SUGGESTED LIST OF STUDENT ACTIVITY

Note: The following activities or similar activities for assessing CIE (IA) for 10 marks
(Any one)
Describe the data collection activity itself (interviews, surveys, library research,
etc.) AND why this specific form of data collection was chosen. Be sure to explain
why you think this kind of data will help you in your design process. Also be sure
to provide details about the activity: how many interviews, how long they took,
where they took place, how many questions asked in a survey, how many
respondents, etc.
Present the results of your data collection. You do not have to have completely
analyzed all your data, but do make sure you present the results of your research.
If you did a survey, please attach a copy of the survey as an appendix; if you did
interviews, please attach a copy of the interview questions.
Discuss any preliminary analysis of your data. What have you learned thus far from
the data should be discussed from an analytical perspective (rather than a data
1 dump). For example, if you surveyed people about their use of the local bus system,
and 90% of your respondents said they take the bus when it is raining, and 60% of
your respondents said they usually wait more than 10 minutes for a bus, think
about what this teaches you rather than just the information itself. In this instance,
you can see that people are generally waiting for several minutes in the rain for a
bus, so a covered bus stop might be a good idea. Keep in mind that your findings
from data should lead directly to the conclusions you make about your design
recommendations. This is the time to begin thinking very specifically about your
research in those terms. This is also an opportunity to think about your definition
of “better” and how it applies to your design goals and your choice of research
activities (for example, if you are choosing to make something better by making it
cheaper, maybe you are interviewing people to see how much loss of functionality
or decrease in features for a technology they are willing to tolerate).
https://ils.unc.edu/courses/2013 spring/inls541 001/Assignments.html#Assign
2 ment 9

DOWNLOAD a dataset from the above link and use data visualization tools to
analyze it.
Acquire the dataset from https://www.kaggle.com/datasets (For example
acquire the data of IPL ball by ball scores and find the standard deviation and
3 variance of score of a batsmen)and clean the data for the root cause of the
problem statement and summarize the date and explain the inference.
COURSE ASSESSMENT AND EVALUATION CHART
Meth What To When/Wh Max Evidence Course

od whom ere Mar collected outcomes
(Frequenc ks
y in the
course)
CIE Mode Studen Two IA 20 Blue Book 1,2,3.
(Continuo ls ts Tests
us Internal (Written)
DIRECT ASSESSMENT
Evaluation Three Skill 20 Model 1,2,3

) tests
Student 20 Model/Rep
Activity ort
TOTAL 60
SEE End End of the 100 Models 1,2,3
(Semester Exam course
End
Examinati
on)
Student Feedback Studen Middle of Feedback 1,2,3,
INDIRECT ASSESSMENT
on course ts the course forms Delivery of

course
End of Course End of the Questionnai 1,2,3
Survey course res Effectiveness
of
Demonstratio
ns&
Assessment
Methods


marks
CIE Assessment 1 (Written Test -1-theory) 60 Average of
1 20
- At the end of 3rd week minutes two written
CIE Assessment 2 (Written Test -2-theory) 60 tests
2 20
- At the end of 13 week
th minutes 20
CIE Assessment 3 (Skill test)
3 3 Hrs 20
- At the end of 5th week Average of
CIE Assessment 4 (Skill test) three skill
4 3 Hrs 20
- At the end of 7th week tests
CIE Assessment 5 (Skill test) 20
5 3Hrs 20
CIE Assessment 6 (Student activity)
6 - 20 20
Semester End Examination (SEE) Assessment
8 3Hrs 100 40
(Practical Test)
Total Marks 100
Note:
1. CIE written test is conducted for 20 marks (Two sections). Each section shall have
two full questions of same CL, CO. Student shall answer one full question (10
marks) from each section.
2. CIE Skill test is conducted for 100 marks (3 Hours duration) as per scheme of
evaluation and the obtained marks are scaled down to 20 marks.
3. SEE is conducted for 100 Marks (3 Hours duration) as per scheme of evaluation.

MODEL QUESTION PAPER
CIE, SKILL TEST AND SEMESTER END EXAMINATION
Course & Programme: Common to all Engineering Programmes. Semester: II

Subject: Statistics and Analytics Practice Max Marks: 100
Course Code : 20SC21P Duration : 3Hrs
Instruction to the Candidate: Answer both questions
1 For the given ungrouped data set plot the A 2,3 1,2,4,5,7 50
bar graph by grouping the data in Microsoft
excel spread sheet and interpret the
obtained results. (Dataset. bar graphs and
interpretation have to be entered in the
answer script).
OR
Generate a random data set in Microsoft
excel spread sheet containing 50 data and
find the mean mode and median in
Microsoft excel spread sheet and interpret
the obtained results. (Dataset, bar graphs
and interpretation have to be entered in the
answer script).
2 Write the python program to enter two A 4 1,2,4,5,7 50
integers and two strings and to print the
sum two integers and two strings.
Questions are not framed from Unit 1 in the final SEE. Short questions can only be asked
from that unit.
SCHEME OF EVALUATION FOR BOTH CIE AND SEE
Sl.
Particulars Marks
No
1 Short questions from Unit 1 10
2 Observation 30

3 Conduction 20
4 Output and Interpretation of result 20
5 Viva-voce 20
100
Total
EQUIPMENT LIST
FOR STATISTICS AND DATA ANALYTICS LAB

2 laboratories. Each containing 30 computers (Desktop) with the following system
requirements.
SYSTEM REQUIREMENTS
SL
NO REQUIREMENTS MINIMUM RECOMMENDED
1 RAM 4GB FOR FREE RAM 8GB OF TOTAL SYSTEM RAM

DISK SPACE 2.5 GB AND 1 GB FOR SSD DRIVE WITH AT LEAST 5 GB OF
2
CACHES FREE SPACE
MONITOR
3 RESOLUTION 1024x768 1920×1080
OFFICIALLY
RELEASED 64-BIT
VERSIONS OF THE
OS(OPERATING FOLLOWING: LATEST 64-BIT VERSION OF
4
SYSTEM) WINDOWS
MICROSOFT
WINDOWS 8 OR
LATER

Course Code 20EG01P Semester I/II
COMMUNICATION
SKILLS
Workplace Skills / 6Hrs Per Week

Course Category Humanities & Social Total Contact Hours
Sciences 78Hrs Per Semester
Prerequisites Nil Teaching Scheme (L:T:P)= 0:1:2
Preamble
Today, Communication is a very important skill for the success of every millennial student.
Millennials affinity to use digital media for communication, changing career and working landscapes,
and greater competition in colleges and workplaces makes enhancing student communication skills
beyond language a must. Rote learning a few tips or tricks the night before an interview or
performance review won’t do the job if students are trying to make an impression in highly
collaborative workplaces of the future. Expectations from students aspiring to be part of such future
workplaces are that they have not just good verbal and non-verbal communication skills but also a
good understanding of how to use modern tools for effective communication.
Scope
To enable students to communicate clearly and effectively, by improving their verbal and non-verbal
communication skills, as well as enhancing interpersonal skills and knowledge of appropriate tools
for specific communication strategies.
Course Objectives
The objectives of communication skills course are:
• Build better communication skills: oral and written expressions and body language
• Enable critical thinking
• Empower with active listening skills
• Enable team work/collaboration
Instructional Strategy
To achieve course objectives, it is important to provide the blended mode of instruction for each of
the concepts. This blended mode of instruction enables and empowers students with:
• Understanding of Concept (Theory):

o Through definitions, discussions, explanation, conclusions.

o Through demonstrations: Show films or other workplace clips that model various
conversation skills. This provides greater clarity of the concept by
§ Enabling observation skills
§ Helping in expression of gesture
§ building confidence
• Application of Concept (Learning by doing): It is imperative that to become a good
communicator, the skills have to be built by applying the concept in the hypothetically
created real life situations. Students are encouraged to participate in each of these activities
during lab session to help build the effective communication skills.
o Use of technology tools like audio books, apps like voice thread or paper telephone,
etc.
§ To help in workplace conversions.
§ To increase active listening, pronunciation
§ To help in voice modulation
o Group discussion
§ Reinforce active listening
§ Enable group debate to imbibe healthy communication strategies
§ Sharpen the skills of “Asking clarifying questions”
§ Sharpen Feedback / Response skills
§ Time management skills
o Group presentations/peer reviews
§ Enable team work
§ Assess concept understanding
§ Sharpen both oral and written communication skills
o Group activities:
§ foster critical thinking
§ enable reflective learning
o Tools usage:
§ Understand the difference between a Dictionary and a Thesaurus
§ Understand “When” and “How” to use these tools for communication
Course Outcomes
After completion of this course, the student shall be able to;
• Communicate
o Identify audience (colleagues, management, customers/vendors)and use the right
methodologies for communication using the right terminology, names, grades and
other nomenclature pertaining to the trade, tools and specific equipment.
• Write
o in at least one language correctly
o basic level notes and observations
o job cards, work sheets, basic report writing and responding to emails, simple
presentations, job applications, resume
• Read
o Technical manuals, task sheets/job orders, policies and regulations pertinent to the
job, including OEM guidelines.
o all instructions given in memos, manuals, documents or those put up as posters
across the premises
o safety precautions mentioned in equipment manuals and panels to understand the
potential risks associated
• Question
o Ask right questions

o Use different ways of asking questions

§ Clarifying/Open ended (What, Why, When, Who, Where, How)
§ Close ended
• Present
o With right Posture & Gesture
o With greater concept/content clarity
o With high confidence
o With voice modulation to capture the attention of audience
• Use technology tools

o Office productivity
§ Word : Report writing
§ PowerPoint : Creating effective presentations
§ Excel : Data handling/Charts
Course Content
The following are the various units to be taught and assessed in order to ensure the student is able
to demonstrate the Course Outcomes mentioned in the Course Outcome section.
Pre-assessment:
Teachers are required to administer pre-assessment before starting the actual instruction. This
helps in gathering information about students’ like their attitude, beliefs, interests, and learning
abilities.
Pre assessment expectations:
• To assess current language skill (Pronunciation, usage, sentence formation)

• To assess their ability to comprehend and respond to the instruction
• To assess their interest towards accepting ideas and learning
• To assess their current communication skills: asking questions, listening, communicating
with confidence
UNIT 1: English – Introduction
Learning outcome:
Learn English pronunciation, functional grammar concepts& Reading. To gain confidence in spoken
English.This section also covers phonemic awareness, grammar rules to set a strong base for
application mode of communication.
Phonemic Going over 42 Examining the understanding of sounds 0:2:2
awareness sounds Spelling patterns (Consonant and Vowel
blending: CVC words)
Pronunciation
o List of words given above (Commonly
used words)
o Diction (speech)
Functional Revision of Parts of speech 2:0:0

Grammar Grammar concepts Sentence structure 0:1:0
Concepts Examples of right sentences
Gender, Singular, Plural 0:1:0

Usage of voice (active and passive) and 0:2:0

tenses
Comprehens Reading Written test for each comprehension 0:0:2

ion activities conversations
(check the unit wise
activity table)
UNIT 2: Communication
Lesson outcome:
At the end of the session:
• Students should be able to
o Understand the communication process, influence of voice/tone, logical
organization of thought, comprehension, listening skills.
o Understand the basic building blocks of communication and strategies for working
with each of these blocks.
o Learn about carrying self, etiquettes of communication.
o Build positive attitude about self and towards handling communication.
o Learn the process for effective communication, problem solving techniques, to be
confident communicator.
What is 1: 2:0
communication?
Why communication?
INTRODUCTI How do we
ON: communicate?
Communication
Theory and Process How communication happens? 0:2:2
• Pictorial representation of
communication framework
• Elements of communication:
sender, receiver, message
• Refer to activity in Unit activity
section.
Barriers to Language 0:2:2

communication • Lack of linguistic ability (video clip
• Grammar play,
content
Context tutorial,
• Psychology role play)
• Physiology
Systematic
• inefficient or inappropriate
information systems

• Lack of communication channel

• lack of understanding of the roles
and responsibilities
Attitude
• Perceptions
• Preconceived notions
Building People People: 0:4:4

blocks of Message • Empathising with sender’s or
communicati Context receiver’s perception
on Listening • Intent & Impact on the
sender/receiver
• Think – Feel – Do model
Message:
Message channels:
o Inperson, email, memo, report
Be aware of Mental Filters
o Level of
understanding/knowledge
o Personal concerns
o Pre conceived notions
Organize message:
o Critical thinking: organize your
thoughts?
Use following strategy:
§ Who
§ What
§ When
§ Why
§ How
o Bundle Primary and Secondary

information
o Mindful about non-verbal
message
o Tone of voice
Examples of Types of messages:
o Inform
o Persuade
o Cyclical
Avoiding Miscommunication:
• Evaluate (Checking for)
understanding of the intent of the
message with the receiver – by
asking clarifying questions?

Context:
Define context
Importance of context
Tune into context
• Timing
• Location
• Relationship
Listening:
Importance of listening
Barrier to listening:
• Mental filters
• Multitasking
• Information overload
Strategies for listening:
• Recall
• Acknowledge
• Summarize
• Listen with eyes for connecting to
non-verbal connection
• Empathize
• Pay attention
• Ask clarifying questions
Effective Listening Behaviors:
• Maintaining relaxed body posture
• Leaning slightly forward if sitting
• Facing person squarely at eye level
• Maintaining an open posture
• Maintaining appropriate distance
• Offering simple acknowledgements
• Reflecting meaning (paraphrase)
• Reflecting emotions
• Using eye contact
• Providing non-distracting environment
Behaviors that hinder effective listening
• Acting distracted
• Autobiographical (Telling your own story
without acknowledging theirs first)
• No response
• Invalidating response, put downs
• Interrupting
• Criticizing
• Judging
• Giving advice/solutions
• Changing the subject
• Reassuring without acknowledgment
UNIT 3: Verbal Communication

Lesson outcome:
At the end of this session, Students should be able to:
• Understand and define the communication framework structure for each of the verbal
communication (in person/telephonic/video conference).
• Understand and apply the verbal communication techniques.
• Use technical jargons in communication.
• Use right body language during verbal communication
• Understand and practice the Active Listening techniques
• Confidently articulate or present the content
Different types In person Use ABC’s: Accuracy, Brevity, Clarity 0:2:4
of verbal o Introduction
communication: Telephonic o Main body of the content
o Summary
Video conference • Use voice/tone effectively
• Reinforcement of Listening skills:
Active and Empathetic listening
skills
• Body language
o Eye contact
o Body posture
o Gesture
o Facial expression
o Space
Effective Listening Behaviours:
Listening Skills Effective Listening • Maintaining relaxed body posture
behaviours • Leaning slightly forward if sitting
• Facing person squarely at eye level
• Maintaining an open posture
• Maintaining appropriate distance
• Offering simple acknowledgements
• Reflecting meaning (paraphrase)
• Reflecting emotions
• Using eye contact
• Providing non-distracting environment
Behaviours that hinder effective listening

• Acting distracted
Behaviours that • Autobiographical (Telling your own
hinder effective story without acknowledging theirs first)
listening • No response
• Invalidating response, put downs
• Interrupting

• Criticizing
• Judging
• Giving advice/solutions
• Changing the subject
• Reassuring without acknowledgment
Using technical Assignment based

Jargons: project
encouraging pupil
to use the technical
terms in the
written and verbal
communication.
This requires
understanding of
the core concepts
(from subject
teacher) and
integrating the
concept with
communication
concepts to gain
the real time
application
knowledge.
UNIT4: Non-Verbal Communication:
Lesson outcome:
At the end of this unit, students should be able to:
• Understand the importance of Body language and its impact.
• Use the strategies for effective body language.
• Understand the relevance of different elements of emails and how to use them.
• Develop the confidence in presenting written content in logical and organized manner with
a definitive email framework.
• Write different email formats confidently: Job application, Request email, apology email,
email responses/feedback.
• Confidently write Resume/Curriculum-vitae, Reports, Formal letters and portfolio.
• Confidently communicate using technical jargons and with increased vocabulary.
Body Body language tips: 0:3:4
Language Strategies • Keep appropriate distance
• Take care of your appearance
• Maintain eye contact
• Smile genuinely

Do’s and Don’ts:

dos:
• smile
• stand up confident and straight
• use appropriate hand gestures
• Make eye contact with audience
• Hold neat note cards while
presenting content
Don’ts
• point at anyone
• rock backwards and forwards
• pace across front of room
• read off slides
read off notes
Different types of emails: Job application,

request letter, letter writing and quick notes 0:2:4
Structure of email text:

• Introduction – Beginning of the
letter and this plays crucial role as it
provides first impression to the
reader.
Written
o Who: author (name +
Art of communication
position and organisation)
Professiona
o what: purpose - controlling
l writing:
idea (what author does or
Emails:
feels)
• Development: Expand on the

• Structured
Controlling Idea/purpose of the
framework for
email by answering relevant WH
writing formal
questions
emails to
o what, when, where, who,
emphasize on
whom, which, whose, why,
professional
and how
communication
• Conclusion: Positive words
in English
o Verb: thank, appreciate,
hope, wish
o Phrases: be glad about, look
forward to
Email writing samples and practice content

in the activity section.

Additional essential writing skills –

Framework will be provided and
assignments will be advised:
• Resume writing /CurriculumVitae

• Report Writing
• Portfolio writing
• Formal letters
UNIT5: English - Reading Skills, Grammar & Vocabulary

Lesson Outcome:
At the end of the session, student should be able to:
• Read sentences with punctuation.
• Understand the techniques of reading complex words.
• Understand and apply the reading techniques for efficient reading.
• Understand the usage of communication tools like Thesaurus and Dictionary that aids in
improving vocabulary and reading.
• Understand and apply the functional grammar aspects in day today communication.
Comprehension activities Passage comprehension

Conversation comprehension 0:2: 2
Reading Techniques for smart
skills reading
Strategies for smart reading:
• Skimming and scanning through
the text, inferring the meaning
• Questioning, summarizing
Functional
Grammar List of Commonly Set of words to accelerate the English 0:1: 2
confused words and how language learning and usage.
to use/avoid them Strategies to use these words effectively
Sentences:
o Declarative Techniques of categorizing sentences, 0:1: 2
sentence understanding how to build with
o Imperative punctuation and effectively use in the
sentence verbal and non-verbal communication.
o Interrogativ This involves more of hands on
Vocabulary e sentence activities.
o Exclamator
y sentence

Punctuation, Content Comprehension remains as a main 0:1: 2

organization and activity to accelerate the learning of
Comprehension spoken and written English language
Techniques: Increases vocabulary, builds confidence

• Learning new and helps in becoming a good
words from communicator.
comprehension by
way of repetition Activities are done, tips are provided to
and usage of these efficiently implement these strategies.
words in
communication
• Listing technical
jargons and
repeatedly using in
the communication
with peers and
teachers
• Chunking and
reading words
Tools
• Understand the 0:1:0
difference between
a Dictionary and a
Thesaurus
• Understand
“When” and “How”
to use these tools
for communication
Unit 6 - Communication Tools
Lesson Outcome:
At the end of the session, student should be able to:
• Use Email technology efficiently for communication
• Present content in the PPT format efficiently
• Understand different platforms available for web conferencing and efficiently work with
them.
• Create reports and data management.
Evolution of Traditional vs. modern communication tools 1:0:0
Introduction communication tools Advantages and Disadvantages
Email using Gmail How to use the tools effectively? 0:1:1
Formatting, layout

One-to-One Including attachment

Working with “To, CC, BCC” and Subject
fields effectively
Using signature
Presentation using Creating, Editing, Saving slides 0:1:2
One-to- PowerPoint Using Animation
Many Formatting options
Webinar / Web Hosting online meeting using online meeting 0:1:1
Presentation (zoom, tools
Google meet, Skype) Inviting people
Sharing screen
Other Reports using MS Open, close, Edit and Save usage with 0:1: 2
Word documents
Layout and strategies for creating report
Sample report creation demo with follow on
assignment
Core subject project report submission
assignment
Data & Graphs using Open, close, save and edit the excel 0:1: 2
MS Excel document
Creating data
Using basic maths operation in Excel for
working with data
Creating simple graphs
Assignment: For example, creating statistics
of subject wise activities completed for 6
months in the credit course
4:34:40
Course Class Activity List (Unit-wise)

The following are the various activities that faculty could conduct for each unit are presented
below;
Unit No. Unit Title Unit Activities
1. 42 sounds revision:
UNIT 1: English – Introduction

Activities:

• This helps in reducing the native language impact

• Helps in understanding Short and Long vowel
words
• Helps in spelling
• Helps in pronunciation
2. Reading commonly used words loud from the list (list
will be provided in the workbook):
• This helps in getting familiarity with the word
pronunciation and helps in reading.
3. Blending words activity:
• Write simple three letter words
(CVC/CVCC/CVCV) pattern words: Can, Cap, Snap,
cape (list will be provided in the workbook)
• Show how to blend with the sound.
• Starting with 3 letter words and continuing to 6 to
8 letter words. Note: Remember before going
through big words, it is always important to assess
and ensure the student is aware of all the 42 sounds
and are comfortable making small words.
Parts of Speech:
building sentence using parts of speech: Demonstration

by teacher: (Will be explained in the book as an example)
Jumbled parts of speech: Student should pick the right

order to build meaningful sentence:
(More samples will be provided in the workbook)
• College go to youeveryday.
• Makes spider web the a
Gender, Singular and Plurals:

• Match the following activity for singular and

plural
• Fill in the blanks activity for genders
Reading & Comprehension: Conversation
• Conversation at the bank (provided in the

workbook along with few more conversation
samples)
• Questions based on this conversation will be
provided in the workbook
Oral:
• Introduce yourself?
Unit 2 Communication Visual:
• Video clip on communication etiquette
• Pictures (in addendum section): do’s and don’ts of
communication
Group of students, one participant whispers in

another participant’s ear, and this message has to be
passed on in a circle until it reaches back the sender.
Making a note of process of message conveyed and
how it was perceived.
o Identify the communication gap if any.

o Discuss and conclude the communication
framework importance
o Discuss/reiterate how to make
communication framework strong.
1. Role play to assess the understanding of building

blocks of communication: (can be tapered to the
core skills of diploma courses, following are just
few of the examples)
a. Announcing the result of students in the
class
or
b. Announcing the job placement of students
(people, context, message, form of
message)
c. Discussing the guidelines of examination

(listening skills)

d. Listening to the weather forecast without

seeing and making note of the listening
ability (play video of weather forecast) –
Assess based on how much the student is
able to recall.
2. Run National geography/Discovery Video

clip/subject related technical video clip on
YouTube:
Check:
o if the student has not understood what a

speaker expressed
o about work or safety related issues
o seeking clarification or advice
appropriately from colleague, customer,
management or vendor
1. Voice/tone modulation: Showcase video
Discussion:
What was right?

Unit 3 Verbal communication
What was wrong?
How it should have been better?
2. Picture description activity (memory test): Class

split into groups A, B C,D: (two or four groups of
at least 5 people each): Teacher shows different
picture to each group for three minutes. Now
each group has to remember what was on the
picture and discuss with each other, write down
the elements on a piece of sheet and share it with
the teacher.
Group that remembers more will be the winner.
Teacher to observe the body language of a student

in the group, listening skills of a student,
presentation skill, comprehension skill, content
delivery skill, confidence level, team work. And
reiterate the concepts, dos and don’ts, and discuss
what could have been done better.
(details of pictures will be given in the workbook)
3. Telephonic conversation:

Role play by a teacher: Call Airtel/Vodafone

department and asking for the phone number
portability process.
After teacher demonstrates, teacher divides the

class in to small groups of three people.
• Each group will be given a different telephone
conversation assignment (samples will be
provided in workbook).
• Two people in the group pretend to converse over
the phone, and the third person makes a note of
right and wrong approaches during the
communication.
Body language
Non-verbal
Unit 4: communication
Simon Says:
Instructions and set up :
1. Series of instructions to the group that are to be

copied/reproduced. Start slowly and increase the pace
2. State the following actions as YOU do them:
o Put your hand to your nose

o Clap your hands
o Stand up
o Turn around
o Touch your shoulder
o Sit down
o Stamp your foot
o Cross your arms
o Put your hand to your forehead – BUT WHILE
SAYING THIS PUT YOUR HAND TO YOUR NOSE
3. Observe the number of group members who copy what
you did rather than what you said.
Outcome of this activity:
Discuss how body language can reinforce/influence

verbal communication and drive the importance of body
language and how to work on it

• Email communication & Using technical jargons:
Sample letter writing as assignment to students.

(list will be provided in the text book – Request,
apology, job application and relevant email
formats that are useful for students post diploma
course)
• There will be at least one assignment that utilizes

technical jargons in email communication.
• Reading passage (Provided in workbook)
English - Reading • Reading passage from the text book
Skills, Grammar & • Comprehension: Passage & Conversation (will be
Vocabulary provided in workbook)
UNIT 5:
• Chunking words and reading activities
• Email writing activities: Writing emails using

Communication tools email provider. Theme based email writing
Unit 6: • Report writing assignment
Writing about a machinery tool/interior designing

plan? Related to the diploma stream.
• Resume writing assignment

• Data handling: Collecting data about
machines/number of students passed out of
college for last three years and creating graph
about it.
• Presentation:
o About learning in the communication class
o Concept presentation
Course Assessment Strategies
Assessment Methodology
a. Observation (role play activities, team activities, demonstration)
b. Questions & Answer – Periodic Assessment
Assessment Grading RUBRICS

Language Basics
Beginner Doesn’t know / understand
Intermediate can read and identify commonly used words
Good Confident , able to communicate well with known people
Advanced Confident , able to communicate well with anyone using a English

Expert Can read, understand; Also comprehend & can train others
Reading
Beginner Beginning to read, has native language impact
Intermediate can read, identify words, build simple 3/4/5 letter words easily
Good Can read, understand, build words, read simple sentences ; Also
comprehend
Advanced Can read, understand, build words, read simple sentences ; Also
comprehend
Expert Confident , read simple and complex sentences with punctuation,
comprehend, spell also build words
Inter personal
communication
Beginner is shy, doesn’t talk/express
Intermediate hesitates to communicate – due to lack of confidence / ability, can talk
to known people
Good can talk to unknown people, less confident, does not express, has hard
time working as a team
Advanced can talk to unknown people, confident, can't express, has hard time
working as a team
Expert confident, can talk to anyone, express well, works well in the team
Body language
Beginner Is shy, not open to communicate, has hard time making friends
Intermediate Knows basics of Body language, practices sometimes
Good Knows basics of Body language, practices most times, has less
confidence in presenting content
Advanced Knows and practices good body language all times, can present
content
Expert Knows and practices good body language all times, is an example,
Leads the pack to get better
Listening Skills
Beginner Just hears, no attention
Intermediate Listens, pays attention, does not ask any question
Good Listens, pays attention, ask questions
Advanced listens, pays attention, asks questions, cannot empathize
Expert Listens, pays attention, asks clarifying questions, able to understand
the message communicated
Acceptability to Learn
Low is not receiving to information
Average receives information but resists to implement
Good , Above Average receives information and implements per instructions
Strong receives information and proactively implements and seeks feedback
Verbal Communication
Beginner Does not communicate, shy, low on confidence: has problem
expressing in his/her native language or English language
Intermediate Can communicate in native language, low confidence, shy, yet to try in
English language

Good Can communicate in native language, good confidence, tries to

communicate in English language
Advanced Can communicate in native language, express view points, good
confidence, comfortable talking to people in the team, tries to
communicate in English language aswell
Expert Can communicate in native language, express view points, very good
confidence, can communicate with anyone without any fear, asks
clarifying questions, communicates well in English, or tries hard to
communicate in English language as well
Non-Verbal
Communication
Beginner Struggles to understand the non-verbal cues, has to work on body
language, has hard time understanding the written communication
aspects
Intermediate Can understand the non-verbal cues, has to practice, tries to apply
written communication aspects
Good Can understand non-verbal cues, practices well, works hard to get
hold on written communication skills, exhibits confidence in whatever
task is given
Advanced Can understand non-verbal cues, can work on written communication
aspects, exhibits confidence, practices well, help others to identify
non-verbal cues
Expert Can understand non-verbal cues, train others, confident, exhibits good
non-verbal cues at all times, can train the pack, has good hold on
written communication as well.
Comprehension
Beginner Tries to read the passage, has hard time to comprehend
Intermediate Can read the conversation passage, has hard time understanding the
regular passage
Good Can read the conversation passage, regular passage, but stutters in
answering questions if there are technical jargons
Advanced Can read the conversation passage, comprehend but regular passage
comprehension is good
Expert Can read the conversation passage, comprehend but regular passage
comprehension is good, explain better to others, help others, lead the
pack
Writing Communication
Beginner Has trouble forming right sentences for written communication
Intermediate Can form sentences, has problem with the layout, gets confused
between layout for different form of written communication
Good Can form sentences, has fair understanding of the layout to be used for
particular type of written communication, but stutters for words and
expression
Advanced Can form sentences, has good understanding of the layout to be used
for particular type of written communication, confident, can express
thoughts well

Expert Can form sentences, has good understanding of the layout to be used
for particular type of written communication, confident, can express
thoughts well and train others and lead the pack
Recommended Learning Resources

https://www.englishclub.com/grammar/parts-of-speech.htm
Watch Amy Cuddy’s TED Talk: Your Body Language Shapes Who You Are
Additional Reading: http://money.cnn.com/2000/05/03/career/q body language/
Pre-assessment:
Activity 1:
Make a group, read random words from the list, build sentence for few words from the list.
Create a group of 3 or 5 students. Randomly pick 5 words from the word list write down on the
board/show them as a chart if you have created a word chart/make chit of words and ask them to
pick one chit and READ the word.
Main idea: Testing the pronunciation ability, language ability, confidence in speaking, ability to
understand and accept the instruction
Activity 2:
Simple reading test – Reading passages (Simple passage from the current course book)
Show the reading passage, let each one of them read 2 lines, after first student is done with reading
two lines, then the next student must pick up from there and read next two lines. This process has to
be followed until the entire class is done with reading or at least ten students are done with reading.
Main idea: Testing listening skills, attentiveness, language ability, pronunciation ability
Activity 3:
Students getting to know each other. Create a group of 3 or 5 students. Each student gets chance to
talk to another student, introduce him/herself to the student, ask question, make a note of the answer
against the name of the student who is answering the question on a sheet of paper.

Main idea: To assess current communication level, body language when students talk with each
other, and confidence.
Commonly Used Word List

When Today For Off
Give Stop There Often
Again Little Than Myself
Do Large At Over
From Both Like Along
Him Name Said Why
Can Few They Has
Go Home Look Bring
But Big Know Part
Old Should Done By
Not Once High As
Her Thought So Into
Time Better Them Away
Long Many Does No
Had Get Always Other
Word Please These With
Very Ask Last An
Your Say Got What
Make Ten Next Come
Day I Those Would
Each Show Play Who
Yes To Girl This
On Am A Could
Been Where You Now
Of Way Be Fun
He Which Were Only
It Write Or Much
More Goes One Tell
My Great All Out
Any Number That Fast
Their First Cat Is
We Find His Small
She Me Have Dog
Did In How See
Went Before Water Here
Full Saw And People
Some Never Use School
Then Boy Take Two
If Right The Call
Night After Will Might
Made About Was May
Up Far Are Walk

To assess current communication skill: Activity based
Activity 3:
Making a group of students and getting to know each other with a predefined expectation for
example:
Name:
I have performed on stage:
I’m good at sports:
I can speak more than 3 languages:
I’m always cheerful:
I like my mother tongue:

Communication Skills (20EG01P)
Course Assessment and Evaluation
Continuous Internal Evaluation (CIE)
Max. Test
Sl.No Assessment Schedule Duration
marks
1 Skill Test 1 At the end of 3rd week of the sem 2 Hrs 20
2 Skill Test 2 At the end of 7th week of the sem 2 Hrs 20
3 Skill Test 3 At the end of 13th week of the sem 2 Hrs 20
Total 60
Scheme of Valuation for CIE
Serial no Assessment Marks
Portfolio Evaluation of activities / exercises conducted upto

1 10
the schedule of Skill Test. (Work Book Based)
2 Assessment of any one through qualitative assessment 10

( Rubrics)
TOTAL 20
RUBRICS FOR ASSESSMENT OF ACTIVITY (10marks)

(Qualitative Assessment)
Dimension Beginner Intermediate Good Advanced Expert Student
2 4 6 8 10 Score
Descriptor Descriptor Descriptor Descriptor Descriptor

Average / Total Marks:
Example Only
RUBRICS FOR ASSESSMENT OF ACTIVITY (10marks)
Faculty need to develop appropriate rubrics as per the assigned activity for assessment
Dimension Beginner Intermediate Good Advanced Expert Student
2 4 6 8 10 Score
Language Basics Doesn’t know Can read and Confident , Confident , Can read, 8
/ understand identify able to able to understand;
commonly communicate communicate Also
used words well with well with comprehend
known anyone using & can train
people a English others
Reading Beginning to Can read, Can read, Can read, Confident , 6
read, has identify understand, understand, read simple
native words, build build words, build words, and complex
language simple 3/4/5 read simple read simple sentences
impact letter words sentences ; sentences ; with
easily Also Also punctuation,
comprehend comprehend comprehend,
spell also
build words
Inter personal Is shy, Hesitates to Can talk to Can talk to Confident, 8
communication doesn’t communicate unknown unknown can talk to
talk/express – due to lack people, less people, anyone,
of confidence confident, confident, express well,
/ ability, can does not can't express, works well
talk to express, has has hard in the team
known hard time time working
people working as a as a team
team
Body language Is shy, not Knows basics Knows basics Knows and Knows and 8
open to of Body of Body practices practices
communicate, language, language, good body good body
has hard time practices practices language all language all
making sometimes most times, times, can times, is an
friends has less present example,
confidence in content Leads the
presenting pack to get
content better
marks
Scheme of Valuation for Semester End Examination (SEE)
Serial no Assessment Evidence Marks Conversion
Portfolio Evaluation- UNIT 1: Work

1 15
Book
English – Introduction
2 15
Communication Book

3 15
Book
Verbal Communication
4 Portfolio Evaluation- UNIT-4: Work 15
Non-Verbal Communication: Book
40 Marks
Portfolio Evaluation- UNIT-5: Work
5 15
English - Reading Skills, Grammar & Book
Vocabulary
6 Any one activity through communication BTE 25
tools- By qualitative assessment (Rubrics). Answer
scripts
TOTAL 100
Course Code 20ME02P Semester I/II

Computer Aided CS,EC,EE & Other
Course Title Course Group
Engineering Graphics allied branches
No. of Credits 4 Type of Course Lecture & Practice
6Hrs Per Week
78Hrs Per Semester
Enthusiasm to learn the
Prerequisites Teaching Scheme (L: T:P) = 1:0:2
subject/Visualizing/Creativity
1. COURSE RATIONALE:
Engineering Drawing is an effective language of engineers. It is the foundation block which
strengthens the engineering & technological structure. Moreover, it is the transmitting link between
ideas and realization.
2. LIST OF COMPETENCIES:
The course content should be taught and implemented with the aim to develop different types of
skills leading to the achievement of the following competencies:
1. Prepare engineering drawings both manually and using CAD with given geometrical
dimensions using prevailing drawing standards and drafting instruments.
2. Visualize the shape of simple object from orthographic views and vice versa
3. COURSE OUT COMES:

CO1 Adopt the standards, dimensioning and construct appropriate drawing scales, in technical
drawing development.
CO2 Visualize objects in all planes and learn displaying techniques for graphical
communication in design process.
CO3 Sketch orthographic projections into isometric projections and vice versa.
CO4 Use computer software and Apply computer aided drafting tools to create 2D /3 D
engineering drawings
4. INSTRUCTIONAL STRATEGY:
1. Teacher should show model of real of the component/part whose drawing is to be made.
Emphasis should be given on cleanliness, dimensioning and layout of sheet.
2. Focus should be on proper selection of drawing instruments and their proper use.
3. The institute should procure AutoCAD or other engineering graphics software for practice in
engineering drawings.
4. Separate labs for practice on Engineering graphics Software should be established.

5 COURSE DETAILS:
The following topics/sub topics is to be taught and assessed in order to develop Unit Skill sets for
achieving CO to attain identified skill sets
Major Learning Topics and Sub- Outcomes Hours

Unit
Topics (in cognitive domain) L-T-P
UNIT-1 1.1 List the different drawing instruments 1. Drawing equipment’s,

and application instruments and materials.
Basic
1.2 Convention of lines and its application 2. Equipment’s-types,
elements of
(Thick, Thin, Axis etc.) specifications, method to use
Drawing
1.3 Practice use of drawing instruments them, applications.
1.4 Representative fraction 3. Instruments-types,
Scales - Full Scale, Reduced Scale and specifications, methods to use
Enlarged Scale themandapplications.
4-0-8
1.6 Dimensioning 4. Pencils-grades, applications,
a) Aligned system and Unidirectional system Different typesoflines.
in the Sketches 5. Scaling technique used
b) Chain dimensioning and Parallel indrawing.
dimensioning 6. Dimensioningmethods. -
1.7 Construct different polygons Alignedmethod. Unilateral with
chain, paralleldimensioning.
7. Constructions of geometrical
figures
UNIT-2 22.1 Introduction to CAD- Hardware 1. CAD-Definition-Importance.
requirements. 2. Familiarization with CAD
CAD
2.2 Various CAD software available Environment and utilities.
Interface
2.3 Familiarization of CAD window - 3. Setting up layout in CAD
Commands like New file, Saving the file, software’s by taking plotting
opening an existing drawing file, Creating parameters
templates 4-0-8
2.4 Setting up new drawing: Units, Limits,
Grid, Snap. Standard sizes of sheet.
2.5 Selecting Various plotting parameters
such as Paper size, paper units, drawing
orientation, plot scale, plot offset, plot area,
print preview
UNIT-3 3.1 Draw basic entities like Line, Circle, Arc, 1. Computer graphics & its
Polygon, Ellipse, Rectangle, Multiline, terminology.
Exposure to
Dimensioning, Inserting text 2. CAD definition, concept &
CAD
Applying constraints - horizontal, vertical, need.
Commands
parallel, concentric, perpendicular, 3. Commands used in CAD
symmetric equal, collinear 4. Functional areas of CAD. -
3.2 Insert title block for the drawing and Coordinate systems. 6-0-12
take the Print out 5. Familiarization of Cad
3.3Create objects by applying constraints commands
and convert the objects to full scale, 6. Draw simple Geometrical
reduced scale and enlarged scale figures using CAD
3.4 Apply copy, mirroring, array, fillet and
trim on the object created
UNIT-4 4.1 Introduction to orthographic 1. Types of projections-
projection orthographicconcept and 4-0-8
Orthographic
4.2 Conversion of pictorial view into applications.
projections
Orthographic Views 2 Various term associated

with orthographic
projections.
(a) Theory of projection.
(b) Methods of projection.
(c) Orthographic projection.
(d) Planes of projection.
3. Conversion of simple pictorial
views into Orthographic views.
Illustrative problems on
orthographic projection.
Note :
(1) Problem should be restricted up
to - Front view/Elevation, Top
view/Plan and Side views only.
Use First Angle Method only.
UNIT-5 5.1 Introduction to Isometric Projections 1. Isometric axis, lines and planes.
5.2 Isometric Scales and Actual Scale 2. Isometric scales.
Isometric
5.3 Isometric View and Isometric Projection 3. Isometric view and isometric
projections
5.4 Conversion of Orthographic Views into drawing.
Isometric 4. Difference between isometric 4-0-8
projection and isometric
drawing.
5. Illustrative problems limited to
Simple elements
UNIT-6 6.1 Draw different types of 2D/3D modeling 1 Difference between 2D & 3D models. 4-0-8
entities using viewing commands, to view
CAD Drafting 2.2D/3D modeling – concept, Simple
them (Problems solved in chapter no 3 and
objects
4 i.e Orthographic, isometric projection).
6.2 2D/3D modeling for Branch specific
components
TOTAL 26-0-52
6. LIST OF PRACTICAL EXERCISES:

The exercises/practical/experiments should be properly designed and implemented with an attempt to
develop different types of skills leading to the achievement of the competency. Following is the list of
exercises/practical/experiments for guidance.
Sr. No Unit Practical Exercises Hours

. No. (Outcomes in Psychomotor Domain)
1. Teacher will demonstrate a: Use of a.
Drawing instruments.
b. Planning and layout as per IS.
1-0-2
c: Scaling technique.
2. Draw following.
Problem – 1 Drawing horizontal, vertical, 30 degree, 45 degree, 60
1 1 & 75 degrees lines using Tee and Set squares/ drafter. (Sketch
book)
Problem – 2 Indicate different convention of lines on the 1-0-2
drawing.(SketchBook)
Problem – 3 Copy the sketch to the required scale and dimensioning
adopting right system and positioning of dimensions using Tee and 1-0-2
Set squares / drafter. (SketchBook)

Problem 4. Draw regular geometric constructions Pentagon,

Hexagon, Square, circle, Triangle and other shapes. (SketchBook) 1-0-2
2 2 Use of CAD commands, plotting the drawing 4-0-8

Problem 5: Drawing basic entities: Circle, Arc, Polygon, Ellipse,
3 3 6-0-12
Rectangle, Multiline
Problem 6: Draw Orthographic views for the given object.
4 4 4-0-8
(CAD Drawing) (Minimum 5 Problems)
Problem 7: Draw Isometric projections for the given Orthographic
5 5 4-0-8
views(CAD Drawing) (Minimum 5 Problems)
Problem 8: Produce Orthographic (2D) Drawings in CAD – Chap 3
Problem 14: Produce Isometric and 3D Drawings in CAD – Chap 4 2-0-4
(CAD Drawings and Printout) (Minimum 5 Problems)
6 6
Problem 9: create 3D models of Program specific Elements such as
Panel box (Minimum 3 Problems related to Program specific)) 2-0-4
(CAD Drawings and Printout)
TOTAL 26-0-52
1 Theory & practice should be in first angle projections and IS codes should be followed wherever
applicable.
2 The dimensions of line, axes, distances, angle, side of polygon, diameter, etc. must be varied for
each student in batch so that each student will have same problems, but with different
dimensions.
3 The sketchbook has to contain data of all problems, solutions of all problems and student
activities performed.
4 Students activities are compulsory to be performed.
7. SUGGESTED LIST OF STUDENT ACTIVITIES:

SL.NO. ACTIVITY
1 Sketch the combinations of set squares to draw angles in step of 150 .300 , 450 , 600 ,
750 , 900 , 1050 , 1200 , 1350 , 1500 , 1650 , 1800 .
2 Take two simple objects. Sketch isometric of them.
3 Take two simple objects. Sketch Pictorial orthographic views of them.
4 Prepare a 2D drawing using AutoCAD and 2D parametric sketcher environment.

5 Prepare 3D solid models using AutoCAD any one mechanical component (Four
components).

1. Bureau of Indian Standards. Engineering Drawing Practice for Schools and Colleges IS:
Sp-46. BIS. Government of India, Third Reprint, October 1998; ISBN: 81-7061-091-2.
2. Bhatt, N. D. Engineering Drawing. Charotar Publishing House, Anand, Gujrat 2010;
ISBN: 978-93-80358-17-8.
3. Jain &Gautam, Engineering Graphics & Design, Khanna Publishing House, New Delhi
(ISBN: 978- 93-86173-478)
4. Jolhe, D. A. Engineering Drawing. Tata McGraw Hill Edu. New Delhi, 2010; ISBN: 978-
0-07-064837-1
5. Dhawan, R. K. Engineering Drawing. S. Chand and Company, New Delhi; ISBN: 81-219-
1431-0.

6. Shah, P. J. Engineering Drawing. S. Chand and Company, New Delhi, 2008, ISBN:81-
219-2964-4.
7. Kulkarni, D. M.; Rastogi, A. P.; Sarkar, A. K. Engineering Graphics with AutoCAD . PHI
Learning Private Limited-New Delhi (2010); ISBN: 978-8120337831.
8. Jeyapoovan, T. Essentials of Engineering Drawing and Graphics using AutoCAD. Vikas
Publishing HousePvt. Ltd, Noida, 2011; ISBN: 978-8125953005.
9. Autodesk. AutoCAD User Guide. Autodesk Press, USA, 2015.
10. Sham, Tickoo. AutoCAD 2016 for Engineers and Designers .Dreamtech Press; Galgotia
Publication, New Delhi, 2015; ISBN 978-9351199113.
9.SOFTWARE/LEARNING WEBSITES :
1. https://www.youtube.com/watch?v=TJ4jGyDWCw
2. https://www.youtube.com/watch?v=dmt6 n7Sgcg
3. https://www.youtube.com/watch?v= MQScnLXL0M
4. https://www.youtube.com/watch?v=3WXPanCq9LI
5. https://www.youtube.com/watch?v=fvjk7PlxAuo
6. http://www.me.umn.edu/coursesme2011/handouts/engg%20graphics.pdf
7. https://www.machinedesignonline.com
10. Mapping of Course Outcomes with Programme Outcomes (Suggestive only):

1 2 3 4 5 6 7
Engineering Graphics CO1 3 0 0 3 0 0 0
CO2 3 0 0 3 0 0 0
CO3 3 0 0 3 0 0 0
CO4 3 0 0 3 0 0 0
Not Mapped
Method is to relate the level of PO with the number of hours devoted to the CO s which maps the given PO.
If >50% of classroom sessions related to the CO are addressing a particular PO, it is considered that PO is mapped at Level 3
If < 5% of classroom sessions related to the CO are addressing a particular PO, it is considered that PO is considered not mapped i.e. Level 0
11. COURSE ASSESSMENT AND EVALUATION CHART:

Sl. Assessment Time frame in Duration Max marks Conversion
No semester
1. Portfolio Evaluation of Entire Duration - 20 20
Drawings (CAD
Practice Exercises)
2 Skill Test-1 Average of two skill
(Skill test 1 is of CAD At the end of 4 week 3 Hrs 100 tests 1and 2 (Both
based-Unit-2) skill tests are to be
3 Skill Test-2 reduced to
weightage of 20
(Skill test 2 is of CAD At the end of 8 week 3 Hrs 100 independently)
based-Unit,3,4) 20

4 Skill Test-3 Skill tests-3 is to be

At the end of 13 reduced to
(Skill test 3 is of CAD 3 Hrs 100
week weightage of 20
based Unit 5,6)
6 Semester End Examination (SEE) Assessment 3 Hrs 100 40
conducted for 100 marks, finally reduced to
40 marks weightage
TOTAL 100
Scheme of Valuation for End Examination

SL NO QUESTIONS MARKS
1. Create Orthographic views for the given Pictorial drawing. Indicate 50
all Dimensions and Annotations. (CAD)
OR
Create Isometric Projections for the given Orthographic views (CAD) 50
2. Create 3D drawing for the given Sketch (CAD) 50
TOTAL 100
12. CAD Laboratory and Other Requirements to Conduct Engineering Graphics Course
1. Latest Configuration Computers which can be able to run latest any Computer Aided
Drafting Software. (At least One Computer per student in practical session.)-30 no
2. Any latest Authorized Computer Aided Drafting Software (30 user licenses)
3. Plotter of size A2/A3
4. LCD Projector.
MODEL QUESTION BANK (Suggestive only)

1. Draw six horizontal parallel lines of 50 mm long with 10 mm intervals (Fig 1).
2. Draw six vertical parallel lines of 50 mm length with 10 mm intervals (Fig 2)

3. Draw 45° inclined lines (Fig 3).
4.Draw the given types of lines using 0.5 range thickness of line according to the specification
(Fig 4).

5. Draw the following Exercises in A4 sheet (Fig 5).

6a ) Illustrate the elements of dimensioning with the help of a sketch.
b) Illustrate the dimensioning of given common features: diameter, radius, chord, Arc
and angle.
7. Copy the sketch to 1:1 scale and dimension it using Aligned system.
8. Copy the sketch to 1:1 scale and dimension it using unidirectional system with Parallel
dimensioning method.
9. Copy the sketch to 1:1 scale and dimension it using Aligned system with Chain dimensioning
method.
10.Copy the sketch to 1:1 scale and dimension it using Aligned system with Parallel dimensioning
method.
11. Copy the sketch to 1:1 scale and dimension it using unidirectional system with Chain
dimensioning method

12. Copy the sketch to 1:1 scale and dimension it using unidirectional system with Parallel
dimensioning method.
ORTHOGRAPHIC ROJECTIONS
1 .Draw the three principal views of the component as shown in the figure.

ISOMETRIC PROJECTIONS
1. .Draw the isometric view of the machine component whose orthographic views are given
below:
1. 2. 3.
4. 5. 6.
7. 8. 9.

4. Draw the isometric View of the machine component whose orthographic views are given below

Course Code 20CS21P Semester II
Course Title MULTIMEDIA & ANIMATION Course Group Core
6Hrs Per Week

78Hrs Per Semester
Prerequisites Nil Teaching Scheme (L: T:P) = 1:0:2
1. RATIONALE
Multimedia is one of the very effective forms of communication through which students can
enhance their presentation skills. Learning multimedia enables the brain's ability to make
connections between verbal and visual representations of content, leading to a deeper
understanding, which in turn supports the transfer of learning to other situations. Animation
is the broad field of study that allows one to show their creativity, amplify their imagination
and exercise graphic and technical skills.
2. COURSE SKILL SET
The aim of the course is to help the student to attain the following industry identified
competency through various teaching learning experiences
Perform jobs related to Multimedia – Text, Image, Audio, Video, and Animation.
6. Explore Multimedia features and applications
7. Demonstrate various Photo editing techniques to enhance visual effects of the image
8. Construct graphic design.
9. Demonstrate animation principles.

4. JOB ROLE
SL.NO LEVEL JOB ROLES
1 3 Freelance Photo Editor and Graphic Designer
2 3 Junior Creative Designer/Digital Artist
3 3 Junior Animator
5. PREREQUISITES
STUDENT Nil.
TEACHER FDP training on Multimedia and Animation course.
6. COURSE OUTCOMES
On successful completion of the course, the students will be able to demonstrate industry-
oriented COs associated with the above-mentioned competency:
LINKED TEACHING
COURSE OUTCOME CL
PO HOURS
Identify basic Multimedia features and
CO1 U 1,4 06
applications.
Compile various Photo Editing techniques to
CO2 U,A 1,4,7 27
create excellent Images.
Construct graphic design / web design like
CO3 Advertisement/logo/flyer/Invitation U,A 1,4,7 09
Card/Banner/web site.
Animate geometrical objects by applying
CO4 U,A 1,4,7 36
different animation principles.
taxonomy)

7. SUGGESTED SPECIFICATION TABLE WITH HOURS & MARKS(THEORY)
UNIT NAME DISTRIBUTION OF

UNITNO. TEACHING THEORY MARKS
HOURS R U A TOTAL
1 Introduction to Multimedia Systems 6
2 Image editing 24
3 Graphic Design 12
4 Animation 36
Total 78 200
These are sample strategies, which teacher can use to accelerate the attainment of the
1. Instructors should expose students to explore User Interface thoroughly.
2. Demonstration using visual/graphic content should be delivered. Emphasis should
be given on presentational skills.
3. Arrange visits to nearby Photo studios/ Advertising Industries/ DTP centres/other
related industries.
4. Students should be exposed to other relevant & similar software and their interfaces.
sets for achieving CO to attain identified skill sets
UNIT NO LEARNING OUTCOME HOURS

TOPICS/SUBTOPICS
(IN COGNITIVE DOMAIN) L:P
1 INTRODUCTION TO MULTIMEDIA SYSTEMS 6

1.1 Introduction 1. Identity Multimedia

§ Significant Features features and Applications
§ Classifications 2. Describe building blocks
§ Applications of multimedia
1.2 Multimedia Building blocks 3. Classify multimedia data
§ Text types and file formats
§ Audio 4. Discuss multimedia
§ Image hardware
§ Animation
§ Video
2:4
§ Image Data Types
1.3 Multimedia Image and Graphics
§ Resolution, Size and
Compression
§ File formats
1.4 Multimedia Hardware
§ Interfaces
§ I/O Devices
§ Storage
§ Communication Devices.
2 IMAGE EDITING 24
2.1 Explore image editing tool 1. Explore interfaces of editing 1:2
interface. tool
§ Customizing Workspaces. 2. Perform photo compositing
§ File Handling 3. Create abstract art
§ Setting size and resolution 4. Apply image editing
parameters. techniques
11:22
§ Importing files.
§ Navigating open document
2.2 Working with Layers
2.3 Exploring Selection Tools

2.4 Exploring Layer Styles

2.5 Using filters
2.6 Image editing techniques
§ Adjusting
exposure(brightness)
§ Adjusting color
§ Cropping and adjusting
aspect ratio
§ Dodging and burning
§ Retouching
§ Sharpening and noise
reduction
3 GRAPHIC DESIGN 12
3.1 Design a graphic 1. Construct a graphic design

§ Cards for a theme
§ Flyer 2. Create social media graphic
§ Banner (like emoji’s)
§ Advertisement
3.2 Using blend modes create
§ Logo
§ Poster
3.3 Creating custom shape & text
wrapping
4 ANIMATION 36
4.1 Exploring User Interface 1. Explore interfaces of 3:6
§ Installation & Configuration Animation Tool.

§ Getting to know about 2. Applying foundation
Editors, Scenes and Objects principles of animation
4.2 Fundamentals of Animation.

§ Types of Animation. 4:8
§ 12 Basic Principles of
Animation.
§ Keyframes, Timelines, Graph
Editor, Dope Sheet
4.3 3D Object Animation.
5:10
§ Creating/Importing Object.
§ Texturing
§ Lighting & Rendering
§ Dynamics
§ Animation
§ Adding Sound effects
§ Saving and Exporting.
Note
1. Emphasis to be given on Basic Animation principles - Squash & Stretch,
Timing, Spacing, Arc, Overlapping, and Anticipation
10. SUGGESTED PRACTICAL EXERCISES

Sl No Suggested Practical Exercises (should be similar in Unit PO CO L:P
skills to the ones enlisted) No Hrs
1 Browse the Internet and find different Multimedia 1 1,4 1 1:2

Presentations and identify the building blocks.
2 i) Identify the importance of Resolution, Size and 1 1,4,7 1 1:2

compression of Images.
ii) Classify file formats of various Multimedia files
i) Practice setting the canvas on the workspace for 2 1,4 2 2:4

different requirements.
ii) Import an image from the browser / Picture folder and

place it on the workspace.
iii) Click and drag the image on the work space.

iv) Scale the image up and down.
4 Design a Greeting card. Use different Layers for image and 2 1,4,7 2 1:2
text.
5 Practice using different Selection tools. 2 1,4,7 2 1:2
6 Practice using different painting tools. 2 1,4 2 1:2
7 Restore old monochrome photos to a new one. Apply 2 1,4,7 2 1:2

suitable colors.
8 Import a similar picture from the internet. Erase unwanted 2 1,4,7 2 1:2
parts in the image, retouch old photos into new. Color
partially.
9 Import a picture of a stationary motorcyclist. Apply 2 1,4,7 2 1:2

suitable masking filters and background. The image should
appear as though the motorcyclist is speeding fast.
10 Create a professional web layout. Use different layers, 2 1,4,7 2 1:2

textures, colors, text, blending features and filter masking.
11 Create an innovative logo for your Institute considering all 2 1,4,7 3 1:2
the features of your Institute.
12 Design a flyer for a short term course that is supposed to 2 1,4,7 3 1:2
commence from 3 weeks ahead from the current date.
13 i) Add different objects to the space. Practice with 3 1,4,7 4 1:2

both shortcut keys and menus.
ii) Perform Transformation operations on objects

added in 14 (i)
14 Create primitive objects like an ice cream cone, snowman, 3 1,4,7 4 2:4
house, tunnel and like.
15 Change the structure of objects by editing Vertices, Edges, 3 1,4,7 4 1:2

Faces and transform the same and observe the changes.
16 Design a red ball lying on green grass. Apply suitable 3 1,4,7 4 2:4
texture and render the same.

17 Animate the ball in Ex. 15 (both rigid and elastic) to bounce 3 1,4,7 4 2:4
thrice and roll. Use suitable animation principles. Add a
booing sound when the ball bounces.
18 Design two playing dice and animate the same. Add 3 1,4,7 4 2:4
suitable sound for dice fall.
19 Show the animation of water flowing out from a pipe 3 1,4,7 4 2:4
around a suitable environment.
Total Hours 26 0:52

=78
The suggested practical exercises specified above are demonstrated for the attainment of the
competency. These practical activities can also be used for the student assessment in portfolio mode
for awarding CIE marks. The lecturer can enhance the competency level of the students by
sketching more practical exercises.
NOTES:
8. It is compulsory to prepare log book/record of exercises. It is also required to get each exercise
recorded in logbook, checked and duly dated signed by the teacher
9. Student activities are compulsory and are also required to be performed and noted in logbook.
10. Student activity is compulsory and part of skill assessment. The activity enables student to
explore the course, help student to demonstrate creativity & critical thinking.
11. Student activity report is compulsory part to be submitted at the time of practical ESE
12. Term work report is compulsory part to be submitted at the time of practical ESE.
13. Student activity and student activity reports must be uploaded to Learning management
system.
14. For CIE, students are to be assessed for Skills/competencies achieved.
PROGRAMME OUTCOMES (PO’S)

COURSE CO’S
1 2 3 4 5 6 7
CO1 3 - - 3 - - 2
MULTIMEDIA & ANIMATION
CO2 3 - - 3 - - 3

CO3 3 - - 3 - - 3
CO4 3 3 3
Level 3- Highly Mapped, Level 2-Moderately Mapped, Level 1-Low Mapped, Level 0- Not Mapped
12. SUGGESTED LEARNING RESOURCES

BOOKS
1 The Illusion of Life / Frank Thomas and Ollie Johnston
2 The Animator’s Survival Kit / Richard Williams
3 Animation For Beginners / Morr Meroz
URL’S
1 https://webneel.com/
2 https://clippingpathindia.com/
3 https://www.photoshopessentials.com/basics/https://www.befunky.com/
https://www.creativebloq.com/advice/understand-the-12-principles-of-
4
animation
https://www.cgtarian.com/animation-tutorials/disney-animation-
5
principles.html
https://ohmy.disney.com/movies/2016/07/20/twelve-principles-animation-
6
disney/
7 https://wave.video/blog/12-basic-principles-of-animation/
https://www.youtube.com/watch?v=ILqOWe3zAbk&list=PLa1F2ddGya -
8
UvuAqHAksYnB0qL9yWDO6&index=2

https://www.youtube.com/watch?v=8XyIYRW 2xk&list=PLa1F2ddGya -
9
https://www.youtube.com/watch?v=hTL6AKR8YDs&list=PLa1F2ddGya -
10
https://www.youtube.com/watch?v=JSAobQPRLwc&list=PLa1F2ddGya -
11
https://www.youtube.com/watch?v=7DNmaR7TKwU&list=PLa1F2ddGya -
12
13. SUGGESTED LIST OF PROPOSED STUDENT ACTIVITYS

Note: the following activities or similar activities for assessing CIE (IA)
SL. NO ACTIVITY
1 Create a Collage of college events with various layouts
2 Create a flyer or advertisement for social issue.
3 Create a matte painting of a mountain region
4 Create scenery with a mirror reflection and proper lighting effect.
Create colourful balls and apply animation effects such that balls fall from a
6
table and roll in different directions.
7 Animate blossoming of a flower.
8 Leaf falling from a tree.


SL.NO ASSESSMENT DURATION MAX CONVERSION
(in MARKS
minutes)
1 CIE Assessment 1 ( Written Test -1 TH) - 60 20 Average of
At the end of 3 d week two written
2 CIE Assessment 2 (Written Test -2 TH) - 60 20 tests
3 CIE Assessment 3 (Skill Test) - At the end of 3 hrs 20 Average of
5 week three skill test
4 CIE Assessment 4 (Skill Test) - At the 3 hrs 20 20
end of 7 week
5 CIE Assessment 5 (Skill Test) - At the end of 3 hrs 20
9 week
6 CIE Assessment 6 (Student activity)- At the - 20 20
end of 11 week
8 Semester End Examination(SEE) 3 hrs 100 40
Assessment (Practical Test)
TOAL MARKS 100
Note: CIE written test is conducted for 100 marks (Two sections). Each section shall have two full
questions of same CL, CO. Student shall answer one full question from each section.

15. RUBRICS FOR EVALUATION OF ACTIVITY
RUBRICS FOR ACTIVITY
Below Exemplar
Poor Average Good Student
Dimension Average y
Score
2 4 6 8 10
Guidelines All
Guidelines have been guidelines
Guidelines
Project Guidelines have have been followed have been
have been
Guidelines not been followed to and exceptionall 8
followed with
Compliance followed. an average executed to y followed
little noise.
extent. maximum and
extent. executed.
Good idea Good use of
No thought Cliché idea or Average idea
or concept. an idea or
given to the concept. or concept.
Subject is concept.
subject. No idea Needs to Subject is
Concept/ Idea presented Presented 6
or concept brainstorm presented in
in a the idea in a
presented in the and apply a typical
competent unique and
work. fresh ideas. manner
manner. novel way.
Good Excellent
demonstrat demonstrat
Demonstrates Demonstrate
Lacks ion of ion of
few qualities s some
demonstration qualities qualities
and characteri qualities and
of qualities and and and
Editing stics of characteristi
characteristics characterist characterist 8
Techniques various cs of various
of various ics ics of all
techniques techniques
techniques and of various techniques
and processes, and
processes. techniques 8and
but unreliable. processes.
and processes
processes expected.
Refined and
Excellent
sophisticate
Limited or no Designing Competent approach to
d approach
Graphic expression of needs more development creative
to original 8
Design creative ideas planning and of creative thinking
and unique
and thoughts. creativity. ideas. and
presentatio
expression.
n.

3D
3D animation /
3D
3D animation animation / rendering is
3D animation / animation /
/ rendering is rendering is done
rendering is not rendering is
incomplete. done well, extremely
done at all. completed.
Expected to works/look well,
Animation & Lacks Works/looks
improve in s properly works/look 7
Rendering knowledge satisfactorily
techniques. and saved s properly
on saving and saved in
Saved in in an and is saved
and appropriatel an
appropriately appropriate in an
y naming files. appropriatel
named file ly named appropriate
y named file.
file. ly named
file.
Exemplary.
Messy and Presentation Excellent
Appeal Good. Very well 7
confusing. can be better. show.
organized.
7.3 = 8
Average / Total Marks: (8+6+8+8+7+7)/6
marks
16. RUBRICS FOR SKILL TEST EVALUATION (CIE & SEE)
Sl. Parameter to be observed Marks Allotted

No.
1 Selection of suitable tool 10
2 Comfort level of working on UI
3 Techniques Applied 30
4 Completion of task 40
5 Appeal 20
Total 100
Note: Execution of task Image Editing & Graphic Design / Animation.

17. SYSTEM REQUIREMENTS:
Sl. No. Specification Quantity

1. Computers with HD Graphics Card 20
2. Software: GIMP, KRETA, BLENDER, PHOTOSHOP or any -
other relevant open-source software.
3. Internet Connectivity, -
Note: Above specification is for a batch of 20 students

!" #ೕಯ &'ಸ) * ಕನ. ಡ 0ರದ / ಕನ. 4ತರ 678 ೕ9 :;< =>ಗ@A
BಗCಪ6Eದ ಪಠ< ಕG ಮ
ಬಳ# ಕನ' ಡ – 1
Course Code 20KA21T Semester : II Course Group – AU/KA
Course Title ಬಳK ಕನ. ಡ – I Category : AU Lecture Course
No. of Credits 2 Type of Course CIE Marks : 50
Total Contact Hours 2 Hrs Per Week Teaching Scheme (L:T:P)= SEE Marks : Nil
26Hrs Per Semester 2:0:0
Table of Contents (ಪ"#$)

Part – 1 Teaching
Hour
Introduction to the Book, Necessity of learning a local language, Tips to learn the language with 02
easy methods. Easy learning of a Kannada Language: A few tips. Hints for correct and polite
conservation. Instructions to Teachers for Listening and Speaking Activities.
Part – II
Key to Transcription for Correct Pronunciation of Kannada Language, Instructions to Teachers 02
to teach Kannada Language
Part – III Lessons to teach Kannada Language - Listening and Speaking Activities
Lesson – 1 Personal Pronouns, Possessive Forms, Interrogative words 02
Lesson – 2 Possessive forms of nouns, dubitive question and Relative nouns 02
Lesson – 3 Qualitative, Quantitative and Colour Adjectives, Numerals 02

Lesson – 4 Predictive Forms, Locative Case 02
Lesson – 5 Dative Cases, and Numerals 02
Lesson – 6 Ordinal numerals and Plural markers 02
Lesson – 7 Defective / Negative Verbs and Colour Adjectives 02

Lesson – 8 Permission, Commands, encouraging and Urging words (Imperative words and 02
sentences)
Lesson – 9 Accusative Cases and Potential Forms used in General Communication 02

Lesson – 10 Helping Verbs “iru and iralla”, Corresponding Future and Negation Verbs 02
Lesson – 11 Do's and Don'ts in Learning of Kannada Language (Any Language in General) 01
Lesson – 12 Kannada Vocabulary List : !"ಷ$ಯ&' )*ೕಪ-ೕ. ಕನ1 ಡ ಪದಗ5 - 01
Kannada Words in Conversation Total Teaching 26 Hours

Hours
!" #ೕಯ &'ಸ) * ಕನ. ಡ ಬಲ8 678 ೕ9 :;< =>ಗ@A
BಗCಪ6Eದ ಪಠ< ಕG ಮ
(ಕನ# ಡ &', )*ತ, , -ಸ/ ೃ1 ಮ34 ಪ6ಪ7 893)
Course Code 20KA21T Semester : II Course Group – AU/KA
Course Title )*ತ, :ಂಚನ – ೧ Category : AU Lecture Course
No. of Credits 2 Type of Course CIE Marks : 50
Total Contact Hours 2 Hrs per Week Teaching Scheme SEE Marks : Nil
26 Hrs per Semester (L:T:P)= 2:0:0
!"ತ$ %ಂಚನ – ೧ (,ಯ./ಸ1 ಕ) (20KA21T)

=ೕಧ@
ಪಠ7 8ಸ: ಕದ ಪ"#$
ಅವC
1. ಕ@Dಟಕದ -GH ಪ4 ಇ1Jಸ ಮ34 )*ತ, ದ KಳವMN 01 QR
2. ಕನ# ಡ )*ತ, ದ -GH ಪ4 ಚ9ST 01 QR
3. ಹVಗನ# ಡ )*ತ, - Xಪ YವD Zಗ

ಕನ1 ಡ 67ತ9 ದ ರಚ<= ಪ> ?ಖ A> ೕರ$ಗ5 ಮCD ಪ> "ವಗ5 03 QR
ಕನ1 ಡ 67ತ9 ಪFಪG ಮCD HIಶ> ಯ
ಕKHಜMಗN ಮCD ವOP Hಧ<
4. Xಪ / \Y Zಗದ ಕನ# ಡ )*ತ, ಮ34 ಪ6ಪ7
ಆ)ಕK Sಪ, ರನ1 , Tನ1 , ಜನ1 . ಒಂದY ZಗವಮN ಮCD Zಗ[ದ> 04 QR
10 ಮCD 11Y ಶತMನದ ಸಮ]&ೕನ ಪ> ?ಖ ಕKಗ5
5. ನ^ಗನ# ಡ )*ತ, - ವಚನ )*ತ, / ಬಸವ Zಗ
ವಚನ 67ತ9 ದ ^ಳವ`== ]ರಣಗ5 ಮCD ಅದರ ಮಹತd 04 QR
ಪ> ?ಖ ವಚನ]ರe, ವಚನ 67ತ9 ದ&' fghಕi ಮCD ]ಯಕ ತತD d
6. 8aರc, ಸ Zಗ ಮ34 )*ತ, ದ ಇತ7 dಪಗe
ರಗV – ಹhಹರ, 04 QR
ಷಟg h – jMರk9 ಸ, ಲmn o ೕಶ ಮCD Hಘkಂಕ
)ಂಗತ, - ರq1 ಕರವ`N,
7. iಸ )*ತ, / GೕತDkಗe 02 QR
rFದರsಸe, ಕನಕsಸe ಮCD ಇತG mೕತN<]He
8. ಇತ7 )*ತ, ದ ಪT mರಗe 04 QR
1T ಪh - ಸವNಜu ,
nನಪದ )*ತ, ,
ತತ4 o ಪದಗe - vwZಳ ಶhೕಫe
9. ಮ*p )*ತ, : yಳವನಕz{ .hಯಮo ಮCD !|}ನ1 ಮo , 02 QR

ಆstಕ YವD ಕನ# ಡ )*ತ, : ~ಂrZHಯಣ ಮCD ?ದ• ಣ
10. ಹVಗನ# ಡ ಮ34 ನ^ಗನ# ಡ )*ತ, ಚ9ST ಯ ಒಂw ಅವxೕಕನ 01 QR
ಒN) OೕಧQ ಅವC 26 TUಗV 26 TU

ಬಳ#ೆ ಕನ(ಡ -I ಮತು/ 0ಾ2ತ3 4ಂಚನ -೦೧ ಪಠ3ಕ;ಮಗ=>ೆ ?ರಂತರ ಆಂತBಕ Cೌಲ3Cಾಪನದ
CಾಗGಸೂJಗಳK
(COURSE ASSESSMENTS AND EVALUATION CHART- CIE ONLY)
Time frame in Max

Sl.No Assessment Type Duration Conversion
semester marks
- At the end of
1. CIE Assessment 1 Written test-1 80 minutes 30 Average of
3 d week
three written
- At the end of
2 CIE Assessment 2 Written test-2 80 minutes 30 tests-1,2,3
7 week
for 30 marks
- At the end of
3 CIE Assessment 3 Written test-3 80 minutes 30
13 week
- At the end of Average of
4 CIE Assessment 4 MCQ/Quiz 60 minutes 20
5 week three
- At the end of Assessment
5 CIE Assessment 5 Open book test 60 minutes 20
9 week 4,5,6 for 20
Student activity & - At the end of marks
6 CIE Assessment 6 60 minutes 20
presentation 11 week
Total
50
Marks

C 20 ISE 1 2 Sem

Uploaded by

Copyright:

Available Formats

C 20 ISE 1 2 Sem

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

C 20 ISE 1 2 Sem

Uploaded by

Copyright:

Available Formats

Diploma in Information Science & Engineering 2020-21 C20

Programme Educational Objectives (PEOs)

PROGRAM OUTCOMES (POs)

Department of Collegiate & Technical Education Bengaluru-560001 Page 2

CONSISTENCY MATRIX OF PEO’S WITH MISSION

Attainment of key principles and practices of

Become socially responsible technicians with

PROGRAM SPECIFIC OUTCOMES (PSOs)

Program shall specify 2-4 Program Specific Outcomes

1.0 GENERAL PROGRAMME STRUCTURE AND CREDIT DISTRIBUTION

Department of Collegiate & Technical Education Bengaluru-560001 Page 3

4. Programme: Programme means Diploma Programme that is Diploma in Information Science

Department of Collegiate & Technical Education Bengaluru-560001 Page 4

interdisciplinary knowledge in every aspect. It could be any branch of engineering - Civil,

Department of Collegiate & Technical Education Bengaluru-560001 Page 5

3.0 COURSE CODE AND DEFINITION:

Cours Teaching Teaching

4.0 INDUCTION PROGRAMME

Department of Collegiate & Technical Education Bengaluru-560001 Page 6

Induction Program Schedule (Suggestive only)

Visit to Central facilities such as Reading room,library,Sport centre,

Department of Collegiate & Technical Education Bengaluru-560001 Page 7

Talk on Respective Program scheme of studies and detail of courses,

Induction Program ( mandatory) Two- week Duration

5.0 MANDATORY VISITS/WORKSHOP/EXPERT LECTURES:

6.0 EVALUATION SCHEME:

A. For Theory Courses:

B. For Practical Courses:

Department of Collegiate & Technical Education Bengaluru-560001 Page 8

C. For Summer Internship / Projects / Seminar etc.

1. Evaluation is based on work done, quality of report, performance in viva-voce,

Range of Marks Level Assigned Grade Grade Point

Department of Collegiate & Technical Education Bengaluru-560001 Page 9

SGPA and CGPA Calculations

Department of Collegiate & Technical Education Bengaluru-560001 Page 10

P=Percentage Conversion= (CGPA-0.75) X 10

Department of Collegiate & Technical Education Bengaluru-560001 Page 11

Department of Collegiate & Technical Education Bengaluru-560001 Page 12

Course Code 20SC01T Semester I/II

1. COURSE SKILL SET

2. COURSE OUT COMES

Department of Collegiate & Technical Education Bengaluru-560001 Page 15

3. SUGGESTED SPECIFICATION TABLE WITH HOURS & MARKS

1 Matrices and Determinants 10 8 20 12 40

4. DETAILS OF COURSE CONTENT

1.2 Algebra of Matrices (addition,

of systems of linear Singular matrices 10-0-0

Department of Collegiate & Technical Education Bengaluru-560001 Page 16

Ø Able to find the equation 2.1 Slope of a straight line

trigonometric ratios of 3.3 Trigonometric ratios of allied angles

trigonometric, logarithmic 4.2 Rules of differentiation

and composite functions 4.3 Successive differentiation (up to second

derivatives 4.4 Applications of differentiation

of integration and of integration

5.3 Methods of integration

5.4 Concept of definite integrals

Department of Collegiate & Technical Education Bengaluru-560001 Page 17

Course CO’s Programme Outcomes (PO’s)

Department of Collegiate & Technical Education Bengaluru-560001 Page 18