132px_132PX.

QXD 2/2/2024 4:05 PM Page 1

Series 132P Pressure Switch / Internal Adjustment

®
Compact adjustable pressure switch for low to mid-range process applications. Efficient Nega-Rate Belleville disc spring for set
point stability and vibration resistance. Stainless steel wetted materials and hermetically sealed, explosion-proof electricals make
this switch ideally suited for hazardous and corrosive media or environments.
Operating Pressure Data
Adjustable Adjustable Set Point Range
Range Deadband Maximum Recommended Proof
Number Increasing Decreasing (approximate) System Pressure Pressure
8 3 to 30 1 to 28 2 1350 2000
9 20 to 80 15 to 75 5 1350 2000
0 80 to 130 67 to 117 13 1350 2000
1 50 to 250 30 to 230 20 4000* 6000*
2 200 to 400 175 to 375 25 4000* 6000*
4 375 to 725 330 to 680 45 4000* 6000*
6 700 to 1500 620 to 1420 80 4000* 6000*
7 1500 to 2300 1400 to 2200 100 4000* 6000*
All values given in psig. * See Miscellaneous T for higher pressures.

Standard Specifications Ordering Sequence — Select desired option for each category
Electrical OPTIONS
Snap action electrical switch Wetted Material
assemblies, Part Numbers 057-0770 4 316 stainless steel port and diaphragm, Buna-N O-Ring
& 057-0772 (Form C) and 057-0771 & 5 316 stainless steel port and diaphragm heliarc welded
057-0773 (Form CC), are listed by Adjustable Range
Underwriters’ Laboratories, Inc., 8 1 psig dec. to 30 psig inc. (0.1 bar dec. to 2.1 bar inc.)
CSA International and NCC 9 15 psig dec. to 80 psig inc. (1.0 bar dec. to 5.5 bar inc.)
(INMETRO). See the miscellaneous 0 67 psig dec. to 130 psig inc. (4.6 bar dec. to 9.0 bar inc.)
option N for additional listings. 1 30 psig dec. to 250 psig inc. (2.1 bar dec. to 17.2 bar inc.)
2 175 psig dec. to 400 psig inc. (12.1 bar dec. to 27.6 bar inc.)
Electrical Connection 4 330 psig dec. to 725 psig inc. (22.8 bar dec. to 50.0 bar inc.)
1/2 NPT male conduit connection 6 620 psig dec. to 1500 psig inc. (42.7 bar dec. to 103.4 bar inc.)
with PVC insulated 18 AWG, 7 1400 psig dec. to 2300 psig inc. (96.5 bar dec. to 158.6 bar inc.)
18” long leads Electrical Form
C 11 amp, 1/4 hp at 125 or 250 VAC; 5 amp resistive, 3 amp inductive at 28 VDC;
Pressure Connection .5 amp resistive at 125 VDC
1/4 NPT Female CC 11 amp, 1/4 hp at 125 or 250 VAC; 5 amp resistive, 3 amp inductive at 28 VDC;
.5 amp resistive at 125 VDC
Temperature Range*
Ambient: - 40°F to + 180°F Enclosure
(- 40°C to + 82°C) 6 Includes an explosion proof, hermetically-sealed electrical assembly. EX d IIC.
Media: - 40°F to + 250°F Division 1 and 2, Class I, Groups A, B, C, and D; Class II, Groups E, F, and G.
(- 40°C to + 121°C) NEMA 4X, 7, and 9; IP66. Leads are factory sealed and Pressure Switches are Dual Seal Certified.
.
* Temperature limits change with Miscellaneous
O-Ring selection. See Electrical A Epoxy paint exterior — extra protection for severe environments
Assembly specification sheet for B Viton O-Ring
Temperature Class Ratings. C EPR O-Ring
Adjustment D SIL approval and marking, per IEC61508 (includes FMEA report)
E 7/16" - 20 SAE Female Port
Internal, slotted adjustment nut G 1/2 NPT Female Port
with range scale H Stainless steel body
Shipping Weight I 3/4 NPT conduit box with terminal strip (Groups C & D only, not available with N option)
Approximately 20 ounces J Annealed stainless steel port screws for H2S environments — Consult factory
for reduced system and proof pressure ratings
M Gold electrical contacts for extremely low current applications
(1 Amp at 125 VAC; 1 Amp Res, 0.5 Amp Ind. at 28 VDC)
Order Miscellaneous N ATEX and IECEx with CE Mark
Option “D” O Cleaned for Oxygen Service (wetted material 5 only)
R 72" Electrical free leads
T 6300 psig system, 9450 psig proof, 410 stainless steel screws (Range 1 thru 7 only)
U M20 x 1.5 Electrical Conduit Adapter

Special (Consult representative or factory)

• Non-catalog adjustable range and/or set point, deadband and proof pressure

Ordering Procedure Example

Explosion Proof
Series
When factory presetting is desired, Wetted Material
Hermetically Sealed
stipulate set point, increasing or Adjustable Range
(NEMA 4X, 7, 9 and 13)
decreasing Electrical Form
Insert available option number or Enclosure
letter designation as required Miscellaneous
132P 4 2 CC 6 _
132px_132PX.QXD 2/2/2024 4:05 PM Page 2

Series 132P Pressure Switch / Internal Adjustment

Field Adjustable
1 to 2300 psig
Envelope Dimensions

5.80
Max.

1.50 SQ 1.2 Adjustment

Cover
Free Leads
18 AWG
18" Long
.56
1.12

Conduit Connection
¹⁄₂ NPT
Pressure Port
¹⁄₄ NPT
.209 Dia. Mtg.
Holes (2 places)

Electrical Form

FORM "C" FORM "CC"

(SPDT) (DPDT) INC
INC
P P
RED NC1 RED NC1
BRN C1 BRN C1
BLU NO1 BLU NO1
GRN BLK NC2
YEL C2
VIO NO2
GRN

Basic Principles of Design

Minimum
Bearing
Points
Snap Action
Electrical Adjustment
Element Actuator Diaphragm
Glass to Metal
Sealed Header

All Stainless Steel Pressure

Construction Motion Negative Rate Port
Electrical Assembly Transfer Arm Belleville
Disc Spring O-Ring

Neo-Dyn®
28150 Industry Drive
Valencia, CA 91355
tel: 864-647-9521 An ITT Company
fax: 864-647-9574 AER0935R2 6/22
www.neodyn.com Specifications and dimensions subject to change.