SAFETY DATA SHEET

Safety Data Sheet according to GB/T 16483-2008 and GB/T 17519-2013

Date of issue/Date of revision 15 May 2024

Version 2

Section 1. Chemical product and company identification

Product code : 00461202
Product name : SIGMAFAST 278 BASE RAL 7035
Product name : SIGMAFAST 278 BASE RAL 7035
Product type : Liquid.

Relevant identified uses of the substance or mixture and uses advised against
Product use : Professional applications, Used by spraying.
Use of the substance/ : Coating.
mixture
Uses advised against : Not applicable.

Supplier's details : PPG Coatings (Kunshan) Co., Ltd

53 Jinyang Road, Lujia Town,
215331 Kunshan City, Jiangsu Province, P.R. China
Tel: 86 512 57678859 Fax: 86 512 57678857

Emergency telephone : 00 86 532 83889090

number (with hours of
operation)

Section 2. Hazards identification

Classification of the substance or mixture according to GB 13690-2009 and GB 30000-2013
Emergency overview
Liquid.
Characteristic.
Highly flammable liquid and vapor.
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Harmful if inhaled.
Suspected of causing cancer.
Toxic to aquatic life.
Toxic to aquatic life with long lasting effects.
Prolonged or repeated contact may dry skin and cause irritation.

IF exposed or concerned: Get medical advice or attention. IF INHALED: Call a POISON CENTER or doctor if you
feel unwell. If skin irritation or rash occurs: Get medical advice or attention. If eye irritation persists: Get medical
advice or attention.
See Section 12 for environmental precautions.

China Page: 1/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 2. Hazards identification

Classification of the : FLAMMABLE LIQUIDS - Category 2
substance or mixture ACUTE TOXICITY (inhalation) - Category 4
SKIN CORROSION/IRRITATION - Category 2
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A
SKIN SENSITIZATION - Category 1
CARCINOGENICITY - Category 2
AQUATIC HAZARD (ACUTE) - Category 2
AQUATIC HAZARD (LONG-TERM) - Category 2
Percentage of the mixture consisting of ingredient(s) of unknown acute inhalation
toxicity: 74.4%
Percentage of the mixture consisting of ingredient(s) of unknown hazards to the
aquatic environment: 44.1%

GHS label elements

Hazard pictograms :

Signal word : Danger

Hazard statements : Highly flammable liquid and vapor.
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Harmful if inhaled.
Suspected of causing cancer.
Toxic to aquatic life.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Prevention : Obtain special instructions before use. Do not handle until all safety precautions
have been read and understood. Wear protective gloves, protective clothing and
eye or face protection. Keep away from heat, hot surfaces, sparks, open flames
and other ignition sources. No smoking. Use explosion-proof electrical, ventilating
or lighting equipment. Use non-sparking tools. Take action to prevent static
discharges. Keep container tightly closed. Use only outdoors or in a well-ventilated
area. Avoid release to the environment. Avoid breathing vapor. Wash thoroughly
after handling. Contaminated work clothing should not be allowed out of the
workplace.
Response : Collect spillage. IF exposed or concerned: Get medical advice or attention. IF
INHALED: Remove person to fresh air and keep comfortable for breathing. Call a
POISON CENTER or doctor if you feel unwell. IF ON SKIN (or hair): Take off
immediately all contaminated clothing. Rinse skin with water. IF ON SKIN: Wash
with plenty of water. If skin irritation or rash occurs: Get medical advice or attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical advice or attention.
Suitable extinguishing : Use dry chemical, CO₂, water spray (fog) or foam.
media
Storage : Store locked up. Store in a well-ventilated place. Keep cool.
Disposal : Dispose of contents and container in accordance with all local, regional, national
and international regulations.

China Page: 2/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 2. Hazards identification

Physical and chemical : Highly flammable liquid and vapor.
hazards

Health hazards : Causes skin irritation. May cause an allergic skin reaction. Causes serious eye
irritation. Harmful if inhaled. Suspected of causing cancer. Prolonged or repeated
contact may dry skin and cause irritation.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.

Environmental hazards : Toxic to aquatic life. Toxic to aquatic life with long lasting effects.

Other hazards which do not : Prolonged or repeated contact may dry skin and cause irritation.
result in classification

Section 3. Composition/information on ingredients

Substance/mixture : Mixture

CAS number/other identifiers

CAS number : Not applicable.

China Page: 3/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 3. Composition/information on ingredients

Ingredient name % CAS number
Talc , not containing asbestiform fibres 10 - <25 14807-96-6
bis-[4-(2,3-epoxipropoxi)phenyl]propane 10 - <25 1675-54-3
calcium carbonate 10 - <25 471-34-1
ethylbenzene 1 - <10 100-41-4
xylene isomers mixture 1 - <10 1330-20-7
benzyl alcohol 1 - <10 100-51-6
Phenol, styrenated 1 - <10 61788-44-1
1-methoxy-2-propanol 1 - <10 107-98-2
oxirane, mono[(C12-14-alkyloxy)methyl] derivs. 1 - <10 68609-97-2
trizinc bis(orthophosphate) 0.1 - <1 7779-90-0

There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require
reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
SUB codes represent substances without registered CAS Numbers.

Section 4. First aid measures

Description of necessary first aid measures
Eye contact : Remove contact lenses, irrigate copiously with clean, fresh water, holding the
eyelids apart for at least 10 minutes and seek immediate medical advice.
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.
Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and
water or use recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show this container or label.
Keep person warm and at rest. Do NOT induce vomiting.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : Causes serious eye irritation.
Inhalation : Harmful if inhaled.
Skin contact : Causes skin irritation. Defatting to the skin. May cause an allergic skin reaction.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

China Page: 4/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 4. First aid measures

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it
is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing
thoroughly with water before removing it, or wear gloves.

See toxicological information (Section 11)

Section 5. Fire-fighting measures

Extinguishing media
Suitable extinguishing : Use dry chemical, CO₂, water spray (fog) or foam.
media
Unsuitable extinguishing : Do not use water jet.
media

Specific hazards arising : Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion
from the chemical hazard. In a fire or if heated, a pressure increase will occur and the container may
burst, with the risk of a subsequent explosion. This material is toxic to aquatic life
with long lasting effects. Fire water contaminated with this material must be
contained and prevented from being discharged to any waterway, sewer or drain.
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon oxides
halogenated compounds
metal oxide/oxides

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training. Move containers from fire area if this can be done without risk.
Use water spray to keep fire-exposed containers cool.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.

China Page: 5/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 6. Accidental release measures

For emergency responders : If specialized clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways,
drains and sewers. Inform the relevant authorities if the product has caused
environmental pollution (sewers, waterways, soil or air). Water polluting material.
May be harmful to the environment if released in large quantities. Collect spillage.

Methods and materials for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dilute with water and mop up if water-soluble.
Alternatively, or if water-insoluble, absorb with an inert dry material and place in an
appropriate waste disposal container. Dispose of via a licensed waste disposal
contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Wash spillages into an
effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
and place in container for disposal according to local regulations (see Section 13).
Dispose of via a licensed waste disposal contractor. Contaminated absorbent
material may pose the same hazard as the spilled product. Note: see Section 1 for
emergency contact information and Section 13 for waste disposal.

Section 7. Handling and storage

Precautions for safe : Put on appropriate personal protective equipment (see Section 8). Persons with a
handling history of skin sensitization problems should not be employed in any process in
which this product is used. Avoid exposure - obtain special instructions before use.
Do not handle until all safety precautions have been read and understood. Do not
get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist.
Avoid release to the environment. Use only with adequate ventilation. Wear
appropriate respirator when ventilation is inadequate. Do not enter storage areas
and confined spaces unless adequately ventilated. Keep in the original container or
an approved alternative made from a compatible material, kept tightly closed when
not in use. Store and use away from heat, sparks, open flame or any other ignition
source. Use explosion-proof electrical (ventilating, lighting and material handling)
equipment. Use only non-sparking tools. Take precautionary measures against
electrostatic discharges. Empty containers retain product residue and can be
hazardous. Do not reuse container.

Conditions for safe storage, : Store between the following temperatures: 0 to 35°C (32 to 95°F). Store in
including any accordance with local regulations. Store in a segregated and approved area. Store
incompatibilities in original container protected from direct sunlight in a dry, cool and well-ventilated
area, away from incompatible materials (see Section 10) and food and drink. Store
locked up. Eliminate all ignition sources. Separate from oxidizing materials. Keep
container tightly closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent leakage. Do not
store in unlabeled containers. Use appropriate containment to avoid environmental
contamination. See Section 10 for incompatible materials before handling or use.

China Page: 6/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 7. Handling and storage

Section 8. Exposure controls/personal protection

Control parameters
Occupational exposure limits
Ingredient name Exposure limits
Talc , not containing asbestiform fibres GBZ 2.1 (China, 11/2022).
PC-TWA: 1 mg/m³ 8 hours. Form:
respirable dust
PC-TWA: 3 mg/m³ 8 hours. Form: total dust
calcium carbonate ACGIH TLV (United States).
TWA: 3 mg/m³ Form: Respirable
TWA: 10 mg/m³ Form: Total dust
ethylbenzene GBZ 2.1 (China, 11/2022).
PC-STEL: 150 mg/m³ 15 minutes.
PC-TWA: 100 mg/m³ 8 hours.
xylene isomers mixture GBZ 2.1 (China, 11/2022). [Xylene]
PC-STEL: 100 mg/m³ 15 minutes.
PC-TWA: 50 mg/m³ 8 hours.
1-methoxy-2-propanol ACGIH TLV (United States, 7/2023).
STEL: 369 mg/m³ 15 minutes.
STEL: 100 ppm 15 minutes.
TWA: 184 mg/m³ 8 hours.
TWA: 50 ppm 8 hours.
Recommended monitoring : Reference should be made to appropriate monitoring standards. Reference to
procedures national guidance documents for methods for the determination of hazardous
substances will also be required.

Appropriate engineering : Use only with adequate ventilation. Use process enclosures, local exhaust
controls ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering controls
also need to keep gas, vapor or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.

Individual protection measures

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye protection : Chemical splash goggles.
Skin protection

China Page: 7/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 8. Exposure controls/personal protection

Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Considering the parameters specified by the glove manufacturer,
check during use that the gloves are still retaining their protective properties. It
should be noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures, consisting of
several substances, the protection time of the gloves cannot be accurately
estimated.
Gloves : butyl rubber
Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity,
wear anti-static protective clothing. For the greatest protection from static
discharges, clothing should include anti-static overalls, boots and gloves.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If
workers are exposed to concentrations above the exposure limit, they must use
appropriate, certified respirators. Use a properly fitted, air-purifying or air-fed
respirator complying with an approved standard if a risk assessment indicates this is
necessary.

Section 9. Physical and chemical properties

Appearance
Physical state : Liquid.
Odor : Characteristic.
Boiling point : >37.78°C (>100°F)
Flash point : Closed cup: 19°C (66.2°F)
Lower and upper explosive : Greatest known range: Lower: 1.48% Upper: 13.74% (1-methoxy-2-propanol)
(flammable) limits
Relative density : 1.43
Media Result
Solubility(ies) :
cold water Not soluble

Viscosity : Kinematic (40°C): >21 mm2/s

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability : The product is stable.

Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions

Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition
products.

China Page: 8/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 10. Stability and reactivity

Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.

Hazardous decomposition : Depending on conditions, decomposition products may include the following
products materials: carbon oxides halogenated compounds metal oxide/oxides

Section 11. Toxicological information

Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
bis-[4-(2,3-epoxipropoxi)phenyl] LD50 Dermal Rabbit 23000 mg/kg -
propane
LD50 Oral Rat 15000 mg/kg -
calcium carbonate LD50 Dermal Rat >2000 mg/kg -
LD50 Oral Rat 6450 mg/kg -
ethylbenzene LC50 Inhalation Vapor Rat 17.8 mg/l 4 hours
LD50 Dermal Rabbit 17.8 g/kg -
LD50 Oral Rat 3.5 g/kg -
xylene isomers mixture LD50 Dermal Rabbit 1.7 g/kg -
LD50 Oral Rat 4.3 g/kg -
benzyl alcohol LC50 Inhalation Dusts Rat >4178 mg/m³ 4 hours
and mists
LD50 Dermal Rabbit 2000 mg/kg -
LD50 Oral Rat 1.23 g/kg -
Phenol, styrenated LD50 Dermal Rabbit >5010 mg/kg -
LD50 Oral Rat 3550 mg/kg -
1-methoxy-2-propanol LC50 Inhalation Vapor Rat >7000 ppm 6 hours
LD50 Dermal Rabbit 13 g/kg -
LD50 Oral Rat 5.2 g/kg -
oxirane, mono[(C12-14-alkyloxy) LD50 Oral Rat 17100 mg/kg -
methyl] derivs.
trizinc bis(orthophosphate) LC50 Inhalation Dusts Rat >5.7 mg/l 4 hours
and mists
LD50 Oral Rat >5000 mg/kg -
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
bis-[4-(2,3-epoxipropoxi) Eyes - Mild irritant Rabbit - 24 hours -
phenyl]propane
Eyes - Redness of the Rabbit 0.4 24 hours -
conjunctivae
Skin - Edema Rabbit 0.5 4 hours -
Skin - Erythema/Eschar Rabbit 0.8 4 hours -
Skin - Mild irritant Rabbit - 4 hours -
xylene isomers mixture Skin - Moderate irritant Rabbit - 24 hours 500 -
mg
Sensitization

China Page: 9/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 11. Toxicological information

Product/ingredient name Route of Species Result
exposure
bis-[4-(2,3-epoxipropoxi) skin Mouse Sensitizing
phenyl]propane
Phenol, styrenated skin Mouse Sensitizing
oxirane, mono[ skin Guinea pig Sensitizing
(C12-14-alkyloxy)methyl]
derivs.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Reproductive toxicity
Not available.
Teratogenicity
Not available.

Specific target organ toxicity (single exposure)

Name Category Route of Target organs
exposure
Talc , not containing asbestiform fibres Category 3 - Respiratory tract
irritation
1-methoxy-2-propanol Category 3 - Narcotic effects
Specific target organ toxicity (repeated exposure)
Name Category Route of Target organs
exposure
ethylbenzene Category 2 - -
Aspiration hazard
Name Result
ethylbenzene ASPIRATION HAZARD - Category 1
benzyl alcohol ASPIRATION HAZARD - Category 2

Information on the likely : Not available.

routes of exposure
Potential acute health effects
Eye contact : Causes serious eye irritation.
Inhalation : Harmful if inhaled.
Skin contact : Causes skin irritation. Defatting to the skin. May cause an allergic skin reaction.
Ingestion : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

China Page: 10/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 11. Toxicological information

Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
General : Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/
or dermatitis. Once sensitized, a severe allergic reaction may occur when
subsequently exposed to very low levels.
Carcinogenicity : Suspected of causing cancer. Risk of cancer depends on duration and level of
exposure.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
Product/ingredient name Oral (mg/ Dermal Inhalation Inhalation Inhalation
kg) (mg/kg) (gases) (vapors) (dusts
(ppm) (mg/l) and mists)
(mg/l)
SIGMAFAST 278 BASE RAL 7035 17471.5 6179.8 N/A 54.4 4.1
bis-[4-(2,3-epoxipropoxi)phenyl]propane 15000 23000 N/A N/A N/A
calcium carbonate 6450 2500 N/A N/A N/A
ethylbenzene 3500 17800 N/A 17.8 1.5
xylene isomers mixture 4300 1700 N/A 11 1.5
benzyl alcohol 1230 2000 N/A N/A 1.5
Phenol, styrenated 3550 N/A N/A N/A N/A
1-methoxy-2-propanol 5200 13000 N/A N/A N/A
oxirane, mono[(C12-14-alkyloxy)methyl] derivs. 17100 N/A N/A N/A N/A

Other information :

China Page: 11/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 11. Toxicological information

Prolonged or repeated contact may dry skin and cause irritation. Sanding and grinding dusts may be harmful if inhaled.
Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain
and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits
causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Avoid contact with skin and
clothing.

Section 12. Ecological information

Toxicity
Product/ingredient name Result Species Exposure
bis-[4-(2,3-epoxipropoxi) Acute LC50 1.8 mg/l Fresh water Daphnia - daphnia magna 48 hours
phenyl]propane
Chronic NOEC 0.3 mg/l Daphnia 21 days
calcium carbonate Acute EC10 >14 mg/l Algae 72 hours
ethylbenzene Acute EC50 1.8 mg/l Fresh water Daphnia 48 hours
Chronic NOEC 1 mg/l Fresh water Daphnia - Ceriodaphnia dubia -
Phenol, styrenated Acute EC50 3.8 mg/l Daphnia 48 hours
1-methoxy-2-propanol Acute LC50 23300 mg/l Daphnia 48 hours
Acute LC50 >4500 mg/l Fresh water Fish 96 hours
oxirane, mono[ LC50 >100 mg/l Fish 96 hours
(C12-14-alkyloxy)methyl]
derivs.
trizinc bis(orthophosphate) Acute LC50 0.112 mg/l Fish 96 hours
Chronic NOEC 0.026 mg/l Fish 30 days

Persistence/degradability
Product/ingredient name Test Result Dose Inoculum
ethylbenzene - 79 % - Readily - 10 days - -
Phenol, styrenated OECD 301F 7 % - Not readily - 28 days - -

Product/ingredient name Aquatic half-life Photolysis Biodegradability

bis-[4-(2,3-epoxipropoxi) - - Not readily
phenyl]propane
ethylbenzene - - Readily
xylene isomers mixture - - Readily
benzyl alcohol - - Readily
Phenol, styrenated - - Not readily

Bioaccumulative potential
Product/ingredient name LogPow BCF Potential
ethylbenzene 3.6 79.43 Low
xylene isomers mixture 3.12 7.4 to 18.5 Low
benzyl alcohol 0.87 - Low
1-methoxy-2-propanol <1 - Low
oxirane, mono[ 3.77 - Low
(C12-14-alkyloxy)methyl]
derivs.

Mobility in soil

China Page: 12/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 12. Ecological information

Soil/water partition : Not available.
coefficient (KOC)

Other adverse effects : No known significant effects or critical hazards.

Section 13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation and
any regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible. This material and its
container must be disposed of in a safe way. Care should be taken when handling
emptied containers that have not been cleaned or rinsed out. Empty containers or
liners may retain some product residues. Vapor from product residues may create a
highly flammable or explosive atmosphere inside the container. Do not cut, weld or
grind used containers unless they have been cleaned thoroughly internally. Avoid
dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers.

Section 14. Transport information

China UN IMDG IATA
UN number UN1263 UN1263 UN1263 UN1263
UN proper PAINT PAINT PAINT PAINT
shipping name
Transport hazard 3 3 3 3
class(es)
Packing group II II II II
Environmental Yes. The Yes. The Yes. Yes. The
hazards environmentally environmentally environmentally
hazardous substance hazardous substance hazardous substance
mark is not required. mark is not required. mark is not required.
Marine pollutant Not applicable. Not applicable. (bis-[4- Not applicable.
substances (2,3-epoxipropoxi)
phenyl]propane)

Additional information
CN : None identified.
UN : None identified.
IMDG : The marine pollutant mark is not required when transported in sizes of ≤5 L or ≤5 kg.
IATA : The environmentally hazardous substance mark may appear if required by other transportation
regulations.

China Page: 13/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 14. Transport information

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

Transport in bulk according : Not applicable.

to IMO instruments

Section 15. Regulatory information

China inventory (IECSC) : All components are listed or exempted.

References : Production Safety Law of the People's Republic of China

Code of Occupational Disease Prevention of the People's Republic of China
Environmental Protection Law of the People's Republic of China
Fire Control Law of the People's Republic of China
Regulations on the Control over Safety of Dangerous Chemicals
Occupational exposure limits for hazardous agents in the workplace chemical
hazardous agents (GBZ2.1)
General rule for classification and hazard communication of chemicals (GB13690)
Safety data sheet for chemical products - Content and order of sections (GB/
T16483)
Guidance on the compilation of safety data sheet for chemical products (GB/
T17519)
General rule for preparation of precautionary label for chemicals (GB15258)
Safety rules for classification, precautionary labeling and precautionary statements
of chemicals (GB30000.2-29)

Section 16. Other information

History
Date of issue/Date of : 15 May 2024
revision
Date of previous issue : 5/15/2024
Version : 2
EHS
Key to abbreviations : ADN = European Provisions concerning the International Carriage of Dangerous
Goods by Inland Waterway
ADR = The European Agreement concerning the International Carriage of
Dangerous Goods by Road
ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
RID = The Regulations concerning the International Carriage of Dangerous Goods
by Rail
UN = United Nations
Indicates information that has changed from previously issued version.

China Page: 14/15

Product code 00461202 Date of issue 15 May 2024 Version 2
Product name SIGMAFAST 278 BASE RAL 7035

Section 16. Other information

Notice to reader
The information contained in this data sheet is based on present scientific and technical knowledge. The
purpose of this information is to draw attention to the health and safety aspects concerning the products
supplied by PPG, and to recommend precautionary measures for the storage and handling of the products.
No warranty or guarantee is given in respect of the properties of the products. No liability can be accepted
for any failure to observe the precautionary measures described in this data sheet or for any misuse of the
products.

China Page: 15/15