Technical Manual Copyright © 2017 Coriant Operations, Inc.


76.90CSFP151/16 All rights reserved.
Rev A

7191 Craft Station FP15.1 Software Release Document

Contents

Section Page

1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Features in FP15.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Minimum Product Revision Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Software Anomalies Corrected in FP 15.1 Related to 7090 Packet Transport Platform . . . . . . . . . . . . . . . 6
5. Software Anomalies in FP15.1 Related to 7090 Packet Transport Platform . . . . . . . . . . . . . . . . . . . . . . . . 6
6. Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rev A 12/17 Page 1

FCC Notification  Federal Communications Commission (FCC) Rules require that you be notified of the
Statement following:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by Coriant Operations, Inc., in
writing can void the user’s authority to operate the equipment.

Industry Canada  Industry Canada interference-causing equipment regulations require that you be
Notification Statement notified of the following:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Voluntary Control
Council for Interference
(VCCI)

Corporate References Tellabs and Coriant are joining forces. You may see references to Coriant or Tellabs
when doing business with us. Contact information is available at
http://www.coriant.com.

Copyright Statement This manual is protected by U.S. and international copyright laws, conventions, and
treaties. Your right to use this manual is subject to limitations and restrictions imposed
by applicable licenses and copyright laws. Unauthorized reproduction, modification,
distribution, display or other use of this manual may result in criminal and civil
penalties.

Trademark Notice The following trademarks and service marks are owned by Coriant Operations, Inc., or
its affiliates in the United States and/or other countries: BROADLEAF®, CABLESPAN®,
CORIANT®, CORIANT DYNAMIC OPTICAL CLOUD™, CORIANT TRANSCEND™, DXX®, ®,

™ ™ ® ® ®
DYNAMIC SIGNAL TRANSFER , FOCUS , MARTIS , , MARTISDXX ,
SM
®
, METROCARE , METROWATCH , mTera , Nano , Pico™, SILVX®, SILVX
® ® ™

®, SILVXMANAGER®, SILVXOSS®, SILVXSOURCE®, SMARTCORE®, SOLAR®, SYCAMORE

INSIGHT
NETWORKS®, TECHNOLOGY THAT TRANSFORMS THE WAY THE WORLD COMMUNICATES™,
®
, TELLABS®, ®
, TELLABS PROPARTNER™, TELLABS. THE FUTURE OF YOUR
BUSINESS. STARTING NOW™, THE WORLD COMMUNICATES THROUGH TELLABS™, TITAN®, YOUR
NETWORKING PARTNER®, XIEON NETWORKS™

Any other company or product names may be trademarks of their respective

companies.
Technical Manual 76.90CSFP151/16 7191 Craft Station FP15.1 Software Release Document

1. General Information
1.01 This document describes the software status for 7191 Craft Station®
Feature Package (FP) 15.1. The software status of this feature package is tracked
using the modification request (MR) process.
1.02 The Craft Station is designed to be installed on a laptop computer for direct
connection to supported Network Elements (NEs).
1.03 The Craft Station is used for routine maintenance and provisioning of
individual NEs. It provides a user-friendly graphical interface in place of SNMP or
TL1/CLI line interface commands.
1.04 The following information is included in this document:
• supported features in this release

• supported platforms

• corrected anomalies in this release

• existing anomalies in this release

1.05 The 7090 Packet Transport Platform documentation set screen captures
may not always reflect current Feature Package features and will be updated in a
future release.
1.06 The online help reflects the latest NE feature package. If the Craft Station
is used with an NE feature package prior to the latest release, there may be
inconsistencies between the user documentation and the online help, and some
context sensitive help may not work correctly. For specific information about
performing system administration and provisioning activities on an NE supporting
a previously released FP, refer to the Craft Station User’s Guide released with that
FP. Online and context sensitive help is not available for the 7090-05 CE Packet
Transport Platform.
1.07 Refer to the applicable network element (NE) Software Release Document
for a complete list of features, open anomalies, and corrected anomalies that apply
to the NE.
1.08 Refer to the Portal for the latest 7191 Craft Station Software Release
Document (http://portal.coriant.com).

Reason for Issue 1.09 Coriant issues this manual at Revision A to include the changes in Table 1,
page 3.
Table 1 Software Release Document Revision History
Revision Change History Release Date

A Initial release for 7191 Craft Station FP15.1. 12/17

Rev A 12/17 Page 3

7191 Craft Station FP15.1 Software Release Document Technical Manual 76.90CSFP151/16

2. Features in FP15.1

New Features
2.01 The 7191 Craft Station FP15.1 supports all Network Element features for
the Feature Packages supported in Table 3, page 5. Refer to the applicable NE
Software Release Document for NE feature descriptions.

Behavioral Changes
2.02 There are no changes in system behavior that are not already covered in
the New Features section.

3. Minimum Product Revision Levels

Computer Requirements
3.01 Table 2, page 4 lists the minimum computer requirements for a laptop
computer running the 7191 Craft Station.
Table 2 Hardware and Operating System Requirements
PC Parameter Required

Software Microsoft Windows® 7 with SP1

Additional Software Java J2SE Runtime Environment 8.0 Update 152 or

newer

Processor Pentium III

RAM 1 GB

Hard Drive 20 GB

Optical Drive  CD-ROM

(only needed when
installed via CD)

Ethernet 10/100 Base T Fast Ethernet PCI Adapter

Serial Port RS-232 or equivalent USB/RS-232 adapter

Video Card 8 MB PCI-bus, 1024 x 768 x 256 colors

Page 4 12/17 Rev A

Technical Manual 76.90CSFP151/16 7191 Craft Station FP15.1 Software Release Document

NE and Craft Station Software Compatibility

3.02 Refer to Table 3, page 5 for NE and Craft Station Feature Package
compatibility.
Table 3 Craft Station and NE Software Feature Package
Compatibility
FP Compatible with this
NE 7191 Craft Station Release

7090-45 CE Packet Transport Platform FP2.0

FP2.1.2
FP2.1.3
FP2.1.4
FP2.1.4F2
FP2.1.4F3
FP2.2
FP2.2.1
FP2.3
FP2.3.1
FP2.4F1
FP2.4F2
FP2.4F3
FP2.4F4
FP2.4F5

7090-25 CE Packet Transport Platform FP2.0

FP2.1.2
FP2.1.3
FP2.1.4
FP2.1.4F2
FP2.1.4F3
FP2.2
FP2.2.1
FP2.3
FP2.3.1
FP2.4F1
FP2.4F2
FP2.4F3
FP2.4F4
FP2.4F5

7090-01 CE Ethernet SFP NID FP3.3

7090-05 CE Packet Transport Platform FP2.0

FP2.1
FP2.2F1
FP2.2.1
FP2.3
FP2.3.1
FP2.3.2
FP2.3.3
FP3.0
FP3.1x
FP3.2
FP3.2F1

Rev A 12/17 Page 5

7191 Craft Station FP15.1 Software Release Document Technical Manual 76.90CSFP151/16

Table 3 Craft Station and NE Software Feature Package

Compatibility (Continued)
FP Compatible with this
NE 7191 Craft Station Release

7090-07 CE Packet Transport Platform FP2.3

FP2.3.1
FP2.3.2
FP2.3.3
FP3.0
FP3.1x
FP3.2
FP3.2F1

7090-07 CE PoE Packet Transport Platform FP3.1x

FP3.2
FP3.2F1

7090-15 CE Packet Transport Platform FP3.0

FP3.1x
FP3.2
FP3.2F1
FP3.3

7090-40 CE Packet Transport Platform FP3.0

FP3.0F1
FP3.1
FP3.1F1

Feature Package Availability and Ordering Information

3.03 To order FP15.1, refer to the Coriant website at
http://www.coriant.com/services_support. Refer to Table 4, page 6.
Table 4 Ordering Information
Part Number Description

81.BV7191FP151 7191 FP15.1 Craft Station Software

4. Software Anomalies Corrected inFP 15.1 Related to 7090

Packet Transport Platform
There are no anomalies that apply to this section.

5. Software Anomalies in FP15.1 Related to 7090 Packet

Transport Platform
There are no anomalies that apply to this section.

Page 6 12/17 Rev A

Technical Manual 76.90CSFP151/16 7191 Craft Station FP15.1 Software Release Document

6. Contact Information
6.01 For information about Coriant services and to contact the Technical
Assistance Center (TAC), refer to the Coriant website at
http://www.coriant.com/services_support.

Rev A 12/17 Page 7