Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
5 views

Arduino Clock (Copy)

Uploaded by

Ferdi Risqo Amardianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
5 views

Arduino Clock (Copy)

Uploaded by

Ferdi Risqo Amardianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

const int clock = 7;

const int data = 8;


uint8_t digits[] = { 0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x07, 0x7f, 0x6f };
void setup()
{
setupInterrupt();
pinMode(clock, OUTPUT);
pinMode(data, OUTPUT);
start();
writeValue(0x8c);
stop();
write(0x00, 0x00, 0x00, 0x00);
}
byte tcnt2;
unsigned long int setMinutes = 50;//SET YOUR TIME HERE, THIS IS FOR Minutes
unsigned long int setHours = 8; //SET YOUR TIME HERE, THIS IS FOR Hours
unsigned long time = (setMinutes * 60 * 1000) + (setHours * 3600 *1000);
void setupInterrupt()
{
TIMSK2 &= ~(1<<TOIE2);
TCCR2A &= ~((1<<WGM21) | (1<<WGM20));
TCCR2B &= ~(1<<WGM22);
ASSR &= ~(1<<AS2);
TIMSK2 &= ~(1<<OCIE2A);
TCCR2B |= (1<<CS22) | (1<<CS20);
TCCR2B &= ~(1<<CS21);
tcnt2 = 131;
TCNT2 = tcnt2;
TIMSK2 |= (1<<TOIE2);
}
ISR(TIMER2_OVF_vect) {
TCNT2 = tcnt2;
time++;
time = time % 86400000;
}
void loop()
{
unsigned long t = (unsigned long)(time/1000);
uint8_t minutes = (byte)((t / 60) % 60);
uint8_t hours = (byte)((t / 3600) % 24);
uint8_t seconds = (byte)(t % 60);
write(digits[hours / 10], digits[hours % 10] | ((seconds & 0x01) << 7),
digits[minutes / 10], digits[minutes % 10]);
}
void write(uint8_t first, uint8_t second, uint8_t third, uint8_t fourth)
{
start();
writeValue(0x40);
stop();
start();
writeValue(0xc0);
writeValue(first);
writeValue(second);
writeValue(third);
writeValue(fourth);
stop();
}
void start(void)
{
digitalWrite(clock,HIGH);
digitalWrite(data,HIGH);
delayMicroseconds(5);
digitalWrite(data,LOW);
digitalWrite(clock,LOW);
delayMicroseconds(5);
}
void stop(void)
{
digitalWrite(clock,LOW);
digitalWrite(data,LOW);
delayMicroseconds(5);

digitalWrite(clock,HIGH);
digitalWrite(data,HIGH);
delayMicroseconds(5);
}
bool writeValue(uint8_t value)
{
for(uint8_t i = 0; i < 8; i++)
{
digitalWrite(clock, LOW);
delayMicroseconds(5);
digitalWrite(data, (value & (1 << i)) >> i);
delayMicroseconds(5);
digitalWrite(clock, HIGH);
delayMicroseconds(5);
}
digitalWrite(clock,LOW);
delayMicroseconds(5);
pinMode(data,INPUT);
digitalWrite(clock,HIGH);
delayMicroseconds(5);
bool ack = digitalRead(data) == 0;
pinMode(data,OUTPUT);
return ack;
}

You might also like