E14R00P54

Dual Band Tower Mounted Amplifier, 1800//2100 MHz, 12 dB, 2 BTS &
2 ANT ports, with 4.3-10 connectors, AISG with 1 RET connector (1 device
with 2 sub-units each)

Industry leading PIM performance

Single AISG with 1 RET connector
2 input ports and 2 output ports
Designed to boost UP-Link Coverage and KPIs
New 4.3-10 connectors for improved PIM performance and size reduction
1 device with 2 sub-units

Product Classification
Product Type 2-BTS:2-ANT (Uniplex) | Tower mounted amplifier

General Specifications
Color Gray

Modularity 2-Twin

Mounting Pole | Wall

Mounting Pipe Hardware Band clamps (2)

RF Connector Interface 4.3-10 Female

Dimensions
Height 280 mm | 11.024 in

Width 175 mm | 6.89 in

Depth 98 mm | 3.858 in

Mounting Pipe Diameter Range 42.6–122 mm

Outline Drawing

Page 1 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 16, 2023
E14R00P54

Electrical Specifications
License Band, LNA DCS 1800 | IMT 2100

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes

Lightning Surge Current 10 kA

Lightning Surge Current Waveform 8/20 waveform

Voltage 7–30 Vdc

Electrical Specifications, AISG

AISG Connector 8-pin DIN Female

AISG Connector Standard IEC 60130-9

AISG 2.0 Page 2 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 16, 2023
E14R00P54
Protocol AISG 2.0

Voltage, AISG Mode 10–30 Vdc

Electrical Specifications
Sub-module 1|2 1|2
Branch 1 1
Port Designation ANT ANT
License Band DCS 1800, LNA IMT 2100, LNA
Return Loss, typical, dB 20 20
Return Loss - Bypass Mode, typical, dB 16 16

Electrical Specifications Rx (Uplink)

Frequency Range, MHz 1710–1785 1920–1980
Bandwidth, MHz 75 60
Gain, nominal, dB 12 12
Noise Figure, typical, dB 1.7 1.6
Total Group Delay, typical, ns 120 80
Insertion Loss - Bypass Mode, typical, dB 2.5 2.3

Electrical Specifications Tx (Downlink)

Frequency Range, MHz 1805–1880 2110–2170
Bandwidth, MHz 75 60
Insertion Loss, typical, dB 0.5 0.3
Total Group Delay, typical, ns 25 15
Return Loss, typical, dB 20 20
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 1000 1000
3rd Order PIM, typical, dBc -160 -162
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Block Diagram

Page 3 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 16, 2023
E14R00P54

Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)

Corrosion Test Method IEC 60068-2-11, 30 days

Environmental Test Method ETSI EN 300 019-1-4

Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware

Volume 4.8 L

Weight, net 6.5 kg | 14.33 lb

Weight, without mounting hardware 6 kg | 13.228 lb

* Footnotes
License Band, LNA License Bands that have RxUplink amplification

Page 4 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 16, 2023