Document No.

POSITIVE DISPLACEMENT PUMP Rev. 0

(CONTROLLED VOLUME) Page 1 of 2
TYPICAL DATA SHEET
1 GENERAL
2 Project: - Job No.: -
3 Owner: - Site: -
4 Purchaser: - Unit: - Unit no.: -
5 Skid No: - Pump item No.:- Service: -
6 No. Required: 02 nos. Working: 01 no. Std by: 01 no Driver: 02 No. Working: 01 No. Std by: 01 No.
7 Applicable to Proposals Purchase As Built
8 Scope Option & Information specified by Purchaser Information required from & options left to vendor. Vendor to cross [ ] the selected Option
9 Manufacturer: Milton Roy India Size & Type: mRoy Model: MRA 12D
10 OPERATING CONDITIONS (Refer Process Data sheet)
11 Liquid: TSP Capacity at PT (LPH):
12 Pumping Temperature (C)(Nor/Max.): 40°C Min: Nor: 1.1 Rated: 2
13 Specific Gravity at PT: 0.9 – 1.1 g/ml Discharge Pressure (kg/cm²,a):
14 Vapor Pressure at PT(Torr): <1.0013 Min: Nor: Rated: 17.72
15 Viscosity at PT(Cp/Cst): NA Suction Pressure (kg/cm²,a):
16 Corrosion Erosion caused by: nil Min: Nor: Rated:1
17 Presence of Solids: NIL Differential Pressure (kg/cm² a):
18 NPSH Available (w/o acceleration head) (m): 1.61 Min: Nor: Rated: 16.72
19 SITE / INSTALLATION DATA
20 Location: Indoor Outdoor w/w/o roof Heated Unheated
21 Site Temperature (° C) Max: 65 Min: - Elect. Area Hazard: Div: Zone2 Class:T3 Group: IIB
22 APPLICABLE CODES & STANDARDS

23 API 675 2nd edition; Job Specification and EIL Standard Spec. 6-41-0021

24 PERFORMANCE
25 Number of feeds: ONE Plunger Speed (stroke/min): (≤ 100) 30
26 Rated Capacity (LPH): 2.3 Plunger Diameter (mm):11.18
27 Acceleration Head (m): 0.001 Cylinder Diameter (mm): - Length of Stroke
28 Plunger Linear speed (m/s): 0.0178 (mm):17.8
Pump Relief Valve Set Pressure (kg/cm²,g): 19.42 (External)
29 Volumetric efficiency (%):[≤ 90%] 90 Pump Head MAWP (kg/cm²,g): 24.5
30 Mechanical Eff. (%): 75 Overall Eff. (%): 67.5 Hydro test Pressure (kg/cm²,g): 36.75
31 NPSH Required (m): 0.0076 Flow Repeatability: ± 3
32 BKW Rated (kW): 0.0059 BkW at I.R.V. Set Pr.:0.0065 Thrust on plunger (kgf): 19.3
33 Packing Type: No. Of rings: Design Plunger Thrust (kgf): 26.7
34 CONSTRUCTON FEATURES
35 Nozzles Size / ANSI Rating Facing Position
36 Pump Suction 1” 150 # RF Vertical
37 Pump Discharge 1” 150 # RF Vertical
38 Suction Manifold (for multi head pumps)
39 Discharge Manifold (for multi head pumps)
40 Inlet 1” 150 # RF Vertical
Relief Valve
41 Outlet 1” 150 # RF Vertical
42 Pulsation Dampener Inlet
43 Suction Outlet
44 Pulsation Dampener Inlet
45 Discharge Outlet 1” 150 # RF Vertical
46 LIQUID END
47 Type: Diaphragm Plunger Valves per feed: Suction: 2 Discharge: 2
48 No. of Heads: Simplex; Duplex Multiplex Valve type: Ball
49 Diaphragm Type: Single Double Sandwich
50 MATERIALS (As per Enquiry data sheet)
51 Frame / Liquid End: SS 316L Packing: Nil
52 Contour Plate: SS316L Valve: SS 316L
53 Hydraulic Diaphragm: PTFE Valve Guide: SS 316L
54 Plunger: CI-GG 220 Valve Body: SS 316L
55 Lantern Ring: - Valve Gasket: PTFE
56 Packing Gland: - Relief Valve: SS 316L (Internal) Body: A105
57 Calibration Pot: SS316L+ Glass Suction/Discharge Pulsation Dampener: SS316L
58 Remarks:
59
60
 POSITIVE DISPLACEMENT PUMP Document No.
(CONTROLLED VOLUME)
TYPICAL DATA SHEET Rev. 0
Page 2 of 2

61 INSPECTION & TESTING

62 Description Required Witnessed Description Required Witnessed
63 Hydrostatic Material Certificates --
64 Performance Test Shop Inspection
65 Steady State Accr. Dismantle & Insp. after test
66 Repeatability R.V. set pressure function test
67 Linearity
68 DRIVER
69 Type of Driver: TEFC Elec. Motor: Steam Driven: Air Motor:
70 Driver Supplied & mounted by Pump Manufacturer-YES Driver Supplied & mounted by others
71 Driver kW: 0.37 Speed (rpm): 1500
72 WEIGHTS
73 Pump with Driver & Base Frame (Kg): 75 Relief Valve (Kg): 5
74 Skid size (lxbxh) (m): --- Total Weight (Kg): ---
75 Suction Pulsation Dampener (Kg): Discharge Pulsation Dampener (Kg): 10
76 Skid Size (lxbxh) (m): Total Weight (Kg):
77 CONTROLS (Refer Process Package)
78 Type of Stroke Control: 10-100%
79 Manual Automatic Remote Local
80 Signal:
81 Pneumatic (kg/cm²g): Minimum: Maximum:
82 Electronic (mA): Minimum: 4 Maximum: 20
83 Remarks:
84 ACCESSORIES
85 Speed Reducer supplied & mounted by Pump Manufacturer: Relief Valve supplied & mounted by Pump Manufacturer:
86 Make: Milton Roy Make: Milton Roy
87 Integral  Separate Internal External
88 Model Worm /worm gear  Gear Ratio: 50:1 Suction and Discharge manifold piping supplied &
89 Common Base Plate under: Pump, gear box & driver -Yes mounted by Pump Manufacturer- Yes
90 Coupling supplied & mounted by Pump Manufacturer: Yes Back Pressure Valve- Not Required *
91 Make: Milton roy Calibration Pot: At Suction At Discharge
92 Type: Flexible Common to all pump units Separate (Refer
93 Gas Pre charging Kit: (if req.) No With Level Guage P&ID
94 Common skid for housing all the components of dosing skid Puls. Dampener (Suct) (See Rem 3) Type: NA
95 With non skid decking and flanged based drain of 2” Size Puls. Dampener (Disch) (See Rem 4) Type: Volume bottle
96 Diaphragm Rupture Detection System: PT & PG
97 REMARKS
98 1. Pump casing design pressure shall not be less than 24.5 kg/cm²,g @ 65C
99 2. Pump manufacturer shall supply & mount Calibration Pot, if the same is specified.
100 3. Pump manufacturer shall supply & mount Suction pulsation dampener, if the same is required to reduce the NPSHR..
101 4. Pump manufacturer shall supply & mount Discharge pulsation dampener to limit the pulsations within ±3%
102 5. For acceleration head loss, Equivalent Suction piping length (m): 5m; Suction pipe diameter (mm):25
103
6. The pump vendor shall calculate the acceleration head. Calculations for Acceleration head & NPSHR shall be furnished. The pump
vendor shall ensure that NPSHA is greater than “Acceleration Head + NPSHR” by a margin of at least 1.0 meter, either by proper
selection of pump speed or by proper valve design or else by providing a suction side volume bottle.
104 6. The pump manufacturer shall supply Controlled Volume pump unit complete with speed reducer, driver, calibration pot, suction
pulsation dampener (if reqd. or specified), discharge pulsation dampener, suction & discharge manifold piping duly prefabricated for
multi-head pumps, relief valves, back pressure valve, instrumentation etc. all duly mounted on a single common base plate, in the pump
manufacturer's shop prior to shop testing

13-10-21 0
DATE REV JE REV. & APPROVED BY