Simulation of Assem1

Date: Tuesday, July 21, 2020

Designer: Solidworks
Study name: Thermal 2
Analysis type: Thermal(Steady state)

Table of Contents
Description...........................................1
Assumptions..........................................2
Model Information..................................2
Study Properties.....................................4
Units..................................................5
Material Properties.................................5
Thermal Loads.......................................6
Contact Information................................6
Description Mesh Information....................................7
No Data Sensor Details........................................8
Study Results........................................8
Conclusion............................................8

Analyzed with SolidWorks Simulation Simulation of Assem1 1

Assumptions

Analyzed with SolidWorks Simulation Simulation of Assem1 2

Analyzed with SolidWorks Simulation Simulation of Assem1 3
Model Information

Model name: Assem1

Current Configuration: Default

Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Boss-Extrude11
C:\Users\cattleya\
Mass:0.847488 kg
AppData\Local\Temp\
Volume:0.000105936 m^3
swx2400\VC~~\Assem1\
Solid Body Density:8000 kg/m^3
Copy of
Weight:8.30538 N
Part2^Assem1.SLDPRT
Jul 21 13:15:06 2020

Cut-Extrude3
C:\Users\cattleya\
Mass:0.0504665 kg
AppData\Local\Temp\
Volume:6.30832e-006 m^3
swx2400\VC~~\Assem1\
Solid Body Density:8000 kg/m^3
Copy of
Weight:0.494572 N
Part2^Assem1.SLDPRT
Jul 21 13:15:06 2020

Boss-Extrude4 Solid Body Mass:4.55023 kg D:\casing\Part1.SLDPRT

Volume:0.000568779 m^3 Jul 21 09:09:45 2020

Analyzed with SolidWorks Simulation Simulation of Assem1 4

 Density:8000 kg/m^3
Weight:44.5923 N

Boss-Extrude11
Mass:0.0125664 kg
Volume:1.5708e-006 m^3
D:\casing\Part1.SLDPRT
Solid Body Density:8000 kg/m^3
Jul 21 09:09:45 2020
Weight:0.12315 N

Cut-Extrude3
Mass:0.920043 kg
Volume:0.000115005 m^3
D:\casing\Part1.SLDPRT
Solid Body Density:8000 kg/m^3
Jul 21 09:09:45 2020
Weight:9.01642 N

Boss-Extrude8
Mass:0.0125664 kg
Volume:1.5708e-006 m^3
D:\casing\Part1.SLDPRT
Solid Body Density:8000 kg/m^3
Jul 21 09:09:45 2020
Weight:0.12315 N

Boss-Extrude9
Mass:0.0125664 kg
Volume:1.5708e-006 m^3
D:\casing\Part1.SLDPRT
Solid Body Density:8000 kg/m^3
Jul 21 09:09:45 2020
Weight:0.12315 N

Boss-Extrude10
Mass:0.0125664 kg
Volume:1.5708e-006 m^3
D:\casing\Part1.SLDPRT
Solid Body Density:8000 kg/m^3
Jul 21 09:09:45 2020
Weight:0.12315 N

Mass:0.0504665 kg
Volume:6.30832e-006 m^3
D:\casing\Part3_1.SLDPRT
Cut-Extrude3 Solid Body Density:8000 kg/m^3
Jul 21 11:55:49 2020
Weight:0.494572 N

Analyzed with SolidWorks Simulation Simulation of Assem1 5

 Cut-Extrude7
Mass:0.801408 kg
Volume:0.000100176 m^3
D:\casing\Part3_1.SLDPRT
Solid Body Density:8000 kg/m^3
Jul 21 11:55:49 2020
Weight:7.8538 N

Study Properties
Study name Thermal 2
Analysis type Thermal(Steady state)
Mesh type Solid Mesh
Solver type FFEPlus
Solution type Steady state
Contact resistance defined? No
Result folder SolidWorks document (D:\casing)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SolidWorks Simulation Simulation of Assem1 6

Material Properties
Model Reference Properties Components
Name: AISI 304 SolidBody 1(Boss-Extrude11)
Model type: Linear Elastic Isotropic (Copy of Part2^Assem1-2),
Default failure Unknown SolidBody 2(Cut-Extrude3)
criterion: (Copy of Part2^Assem1-2),
Thermal 16 W/(m.K) SolidBody 1(Boss-Extrude4)
conductivity: (Part1-2),
Specific heat: 500 J/(kg.K) SolidBody 2(Boss-Extrude11)
Mass density: 8000 kg/m^3 (Part1-2),
SolidBody 3(Cut-Extrude3)
(Part1-2),
SolidBody 4(Boss-Extrude8)
(Part1-2),
SolidBody 5(Boss-Extrude9)
(Part1-2),
SolidBody 6(Boss-Extrude10)
(Part1-2),
SolidBody 1(Cut-Extrude3)
(Part3_1-3),
SolidBody 2(Cut-Extrude7)
(Part3_1-3)
Curve Data:N/A

Thermal Loads

Load name Load Image Load Details

Entities: 20 face(s)
Temperature: 311.15 Kelvin

Temperature
-1

Analyzed with SolidWorks Simulation Simulation of Assem1 7

Contact Information

Contact Contact Image Contact Properties

Type: Bonded
Components: 1 component(s)
Options: Compatible
mesh
Global Contact

Analyzed with SolidWorks Simulation Simulation of Assem1 8

Mesh Information
Mesh type Solid Mesh
Mesher Used: Curvature based mesh
Jacobian points 29 Points
Maximum element size 28.6903 mm
Minimum element size 1.43452 mm
Mesh Quality High
Remesh failed parts with incompatible mesh Off

Mesh Information - Details

Total Nodes 255908
Total Elements 135216
Maximum Aspect Ratio 765
% of elements with Aspect Ratio < 3 77.9
% of elements with Aspect Ratio > 10 11.6
% of distorted elements(Jacobian) 0.439
Time to complete mesh(hh;mm;ss): 00:00:34
Computer name: KUBO

Analyzed with SolidWorks Simulation Simulation of Assem1 9

Sensor Details
No Data

Study Results

Name Type Min Max

Thermal1 TEMP: Temperature 0 Kelvin 311.15 Kelvin
Node: 154735 Node: 1

Assem1-Thermal 2-Thermal-Thermal1

Conclusion

SIMULASI BACKLING

Analyzed with SolidWorks Simulation Simulation of Assem1 10

 FLOW SIMULATION (ERROR)

Analyzed with SolidWorks Simulation Simulation of Assem1 11

 DROP TEST

(BELUM SELESAI, ERROR)

Analyzed with SolidWorks Simulation Simulation of Assem1 12