SPEAKER SYSTEM

NS-45E SERVICE MANUAL

NS-45E
■ DIMENSIONS ■ NETWORK CIRCUIT DIAGRAM
1.8mH

INPUT 15µF WOOFER

WOOFER
768 (30-1/4")

4.7µF
880 (34-5/8")

TWEETER
0.45mH

■ WIRING DIAGRAM
BE
TWEETER BL C1 L2

RE
WOOFER BL
YE
TERMINAL
BL

L1
RE
WOOFER C2
BL

233 (9-3/16") 31 244 (9-5/8")

(1-1/4") 275 (10-13/16")
Unit : mm (inch)

■ SPECIFICATIONS
Type .................... 2-way 3-speaker bass reflex speaker system Maximum Input Power .............................................. 240 W
Speaker Unit Sensitivity ...................................................... 90 dB/2.83 V/m
Woofer ....................................... 16 cm (6.5") cone x 2 Crossover Frequency ................................................ 3 kHz
Tweeter ............................................... 3 cm (1") dome Dimensions (W x H x D) .................... 233 x 880 x 275 mm
Input Terminal ...................................................... Screw-type (9-3/16" x 34-5/8" x 10-13/16")
Impedance ................................................................... 6 ohms Weight ..................................... 11.6 kg (25 lbs. 8 oz.) /1 piece
Frequency Response ................................. 38 Hz – 30 kHz Accessories ..................... Speaker cord (4m) x 2, Stand x 8,
Nominal Input Power ................................................... 80 W Screw x 16, Leg x 8

✻ Specifications are subject change without notice due to

product improvements.

100693
P.O.Box 1, Hamamatsu, Japan

Downloaded from www.Manualslib.com manuals search engine

 A B C D E
NS-45E

1 ■ EXPLODED VIEW

6
2

3
2

3 21

22

21

5
2-2 1-5

201
1-1
2-1

1-6 203
6

200

202

Downloaded from www.Manualslib.com manuals search engine

 NS-45E

■ PARTS LIST
Ref.
No. PART NO. Description Remarks Markets
* 1 V4126000 SPEAKER CABINET
1-1 VU932600 HOLDER
1-5 FM177150 ELECTROLYTIC CAP 15uF 50V
1-6 VD929600 ELECTROLYTIC CAP 4.7uF 50V
* 2 V4106400 SPEAKER TERMINAL 203-TST-S14BC
2-1 V2729700 EMBLEM A
2-2 VP161000 PUSH NUT SPN1.5
* 3 XW307A00 LOUD SPEAKER TWEETER
* 4 XW309A00 LOUD SPEAKER WOOFER
* 6 V4140500 FRONT GRILLE ASS’Y
21 V2769000 HEXAGON SOCET TAPPING SCREW 4x20 MFC2-BL
22 EN230180 OVAL HEAD TAPPING SCREW 3.5x16 MFC2-BL

ACCESSORIES
200 VT704200 SPEAKER CABLE 4.0m
201 V4564100 STAND ASS’Y STANDx1
* 202 V4564500 LEG LEGx8
203 EP040250 BIND HEAD TAPPING SCREW 4x16 ZMC2-BL

* New Parts

Downloaded from www.Manualslib.com manuals search engine

 NS-45E

■ ATTACHING THE STANDS

Stand x 8 Screw x 16 Leg x 8

When placing the speakers, be sure to use the stands to

increase stability.

Use the 8 specified holes located on the base of the

speaker.

Procedures
1. Put a screw through the inside hole on the stand and
screw it into the speaker at one of the outside holes on
the base of the speaker.
At this time, screw it untightly so that the stand can still
be moved.
2. Put another screw through the outside hole on the
stand, and screw it into the inside hole on the base of
the speaker.
3. Tighten both of the screws firmly.
4. Attach the leg to the bottom of the end portion of the
stand.
5. Attach the other stands to the other corners of the base
of the speaker in the same way and confirm that all 4
stands have been firmly attached.

Note
Be carefull not to apply force to the side of the
speaker, otherwise the speaker may fall causing
damage to the speaker or personal injury.

Downloaded from www.Manualslib.com manuals search engine