Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Modaflow-Epsilon en A4

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MODAFLOW® EPSILON

Technical Datasheet

PRELIMINARY PRODUCT INFORMATION DEVELOPMENT PRODUCT


x
This product is serving for trial purposes only. Deviations which might
TYPE occur during transfer into manufacturing in a commercial scale are
possible and do not constitute any material defect.
Acrylic flow modifier, without silicone addition
x
x
Active substance
approx. 80 % in methoxy propyl acetate

TENTATIVE PRODUCT DATA SPECIAL PROPERTIES AND USE


Determined per batch: Flow modifier for solvent borne industrial coatings.

Colour / Appearance VLN 250 The use of Modaflow Epsilon can significantly improve following coating
colourless to properties:
colour
light yellow
appearance clear - Improve flow and leveling
- Reduce pinholes, fisheyes, craters and orange peel
Dynamic Viscosity DIN EN ISO 3219 - Improve substrate wetting
dynamic viscosity [mPa.s] 500 - 5000 - Maintain or improve substrate adhesion
(25 1/s; 23 °C) - Defoam and aid in air release
- Facilitate pigment dispersion
Non-Volatile Matter DIN EN ISO 3251
non-volatile matter [%] 80 - 82 Modaflow Epsilon is also effective in eliminating pinholes and craters in
(1 h; 150 °C; 2 g) epoxy, polyester, hybrid, urethane, and acrylic based coating systems.
Modaflow Epsilon does not contain silicone ingredients.
Colour Scale (Hazen) DIN EN ISO 6271-1
Hazen colour value <= 80
Quantity to be added: 0.15 - 2.5 % on solid resin.
Refractive Index DIN 53491 x
refractive index 1,4530- 1,4560 STORAGE
(20 °C)
At temperatures up to 25 °C storage stability packed in original containers
Not continually determined: amounts to at least 1460 days.
x

Density (Liquids) DIN EN ISO 2811-2 DISTINGUISHING FEATURES


density [g/cm³] 1
approx. Modaflow Epsilon has the same technical characteristics as Modaflow
(20 °C) Resin and enables due to the lower viscosity better incorporation
properties and handling.
Flash Point DIN EN ISO 1523
flash point [°C] 55
approx.
x
x
cless-lightyell = colourless to light yellow

6.0/18.06.2020 (replaces version 5.0) Worldwide Contact Info: www.allnex.com Page 1/2
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2020 allnex Group. All Rights Reserved.
MODAFLOW® EPSILON
Technical Datasheet

x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
REMARK:
Data contained in this publication are based on careful investigations
(and are intended for information only). Due to scale up of this product
there is not yet sufficient experience concerning serial production. We
can therefore not exclude, that based on future knowledge product data
and other indicated properties in upcoming Technical Data Sheets will be
subject to change. We reserve the right to leave the product name
unchanged, even if product data or other indicated properties will vary
from the present product info. Regardless of the data contained in this
publication any user is obliged to carry out tests under his own
responsibility as to the suitability of the product for a particular use and
to investigate the possible violation of industrial property rights of third
parties. Information is therefore not binding and cannot be construed as
guaranteeing specific properties of products. We apply our General Sales
Conditions.

6.0/18.06.2020 (replaces version 5.0) Worldwide Contact Info: www.allnex.com Page 2/2
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2020 allnex Group. All Rights Reserved.

You might also like