Public Works Authority

COMPANY LOGO Assets Affairs

Roads Maintenance Department

REQUEST FOR INSPECTION / TEST

Project Title : Zonal Framework for Road Maintenance Qatar

Zonal Inspections for Qatar South West - ZF_001
Project No: : AA ROM 2017 203 G
Project Co-Coordinator : Mr. Emad Hassan Alhaj yousef
Contractor : Al Jaber And Makhlouf

B.O.Q.Item No: ZF.G.F.28

ZF.G.F.30
ZF.G.I.28 Location : Attached Date: 25/9/2018

R.F.I. No : 2 Drawing : N/A Weather : Sunny

THE WORK / MATERIAL DETAILED BELOW ARE AVAILABLE FOR INSPECTION

Type of Works/Particulars Item No - ZF.G.F.28 : 867.25 (sqm) Patching - in Carriageway laid by Hand

Item No - ZF.G.F.30 : 209.4 (Sqm) Patching - in Carriageway laid by Hand

Item No - ZF.G.I.28 : 890.1 (sqm) Patching - In carriageway laid by machinery

Submitted By:YOGARAJ Date: 25/9/2018 Time:

Received / Inspected By: Date: Time:

Engineer's Comments :

The Above Detailed Works / Materials have been Inspected are:

Approved

Approved Subject to comments above

Not Approved amend and Resubmit

Contractor's Eng'r. Roads Site Engineer Quantity Surveyor Project Coordinator

Signature / Date Signature / Date Signature / Date Signature / Date

Note: Contractor must provide 24 Hour notice for works/materials to be inspected

 Public Works Authority
COMPANY LOGO Assets Affairs
Road Operation & Maintenance Department

REQUEST FOR INSPECTION / TEST

Project Title : Maintenance and Improvement of Roads Throughout Qatar

Contract -1/2014

Project No: AA-R 14/15 OM 401 C1 G

Project Co-Ordinator : ………
Contractor : ………..

B.O.Q.Item No:
Site Instruction No: Location : Date: :
R.F.I. No: Drawing : Weather :

THE WORK / MATERIAL DETAILED BELOW ARE AVAILABLE FOR INSPECTION

Type of Works/Particulars

Submitted By: Date: : Time: :

Received / Inspected By: Date: : Time: :

Engineer Comment :

The Above Detailed Works / Materials have been Inspected are:

Approved

Approved Subject to comments above

Not Approved amend and Resubmit

Contractor Site Engineer Quantity Surveyor Project Coordinator

Sign/Date Sign/Date Sign/Date Sign/Date

Note: Contractor must provide 24 Hour notice for works/materials to be inspected
 Public Works Authority
Assets Affairs
Roads Maintenance Department

REQUEST FOR INSPECTION / TEST

Project Title : Zonal Framework for Road Maintenance Qatar

Zonal Inspections for Inner Doha -072
Project No: : AA ROM 2017 203 G
Project Coordinator : Mr. Rogelio Reyes
Contractor : INFRAROAD & CONTRACTING L.L.C

B.O.Q.Item No:
Date: 6-Jan-24

WO No : Drawing : N/A Weather : Sunny

RFI. No : INFSIG00648

THE WORK / MATERIAL DETAILED BELOW ARE AVAILABLE FOR INSPECTION

Type of Works/Particulars BOQ Items QTY Unit

1 ZF.I.F.494 2,296.80 LM

Submitted By: Ahamed Nusky Date: 6-Jan-24 Time:

Received / Inspected By: Date: Time:

Engineer's Comments :

The Above Detailed Works / Materials have been Inspected are:

Approved

Approved Subject to comments above

Not Approved amend and Resubmit

Contractor Rept. Inspector Engineer Quantity Engineer Senior/Lead Enginer

Signature / Date
 ZONAL FRAMEWORK CONTRACT FOR ROAD MAINTENANCE QATAR , ZONAL
INSPECTIONS FOR INNER DOHA - 072
PROJECT No : AA ROM 2017 203 G

Quantity Calculation

RFI. No : INFSIG00648

SN BOQ ITEMS QTY UNIT DESCRIPTION

Thermo-Plastic / Cold Plastic Road Markings on Major

junctions, Major Roundabouts and other critical locations:
MACHINE LAID THERMOPLASTIC MARKING (SCREED TYPE,
ZF.I.F.494 2,296.80 LM (2.0 ± 0.3 mm Minimum Thickness)
Supply and apply White thermoplastic after cleaning and
preparing the surface as required
Delineation Line Markings – 150 mm

ZF.I.F.494
LOCATION WORK LOCATION M105 Remarks
LM

OLD AIRPORT MATAR QADEEM 2,296.80

QUANTITY 2,296.80

TOTAL QUANTITY 2,296.80

RATE 14.26

TOTAL
AMOUNT 32,752.37 32,752.37
AMOUNT
CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Thermo-Plastic Road Markings

ZF.I.H.34 (I) Road Markings MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum LM 30000.00 30,000.00 - - 0.00% - - 0.00% - - 0.00% -
Thickness)
Supply materials and apply thermoplastic road marking, straight or
gentle curve, solid or dashed line after cleaning and preparing the
surface as required.

White Thermoplastic Road marking 120mm Wide

Thermo-Plastic Road Markings

ZF.I.H.35 (I) Road Markings MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum LM 25000.00 ` #VALUE! - 0.00% - - 0.00% - - 0.00% -
Thickness)
Supply materials and apply thermoplastic road marking, straight or
gentle curve, solid or dashed line after cleaning and preparing the
surface as required.
White Thermoplastic Road marking 150mm Wide

Thermo-Plastic Road Markings

ZF.I.G.36 (I) Road Markings MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum LM 6000.00 6,000.00 - - 0.00% - - 0.00% - - 0.00% -
Thickness)
Supply materials and apply thermoplastic road marking, straight or
gentle curve, solid or dashed line after cleaning and preparing the
surface as required.
White Thermoplastic Road marking 200mm Wide

ZF.I.E.38 (I) Road Markings LM 500.00 500.00 - - 0.00% - - 0.00% - - 0.00% -

Thermo-Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.39 (I) Road Markings Thickness) LM 500.00 500.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply thermoplastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required.

Yellow Thermoplastic Road marking 120mm Wide

ZF.I.H.40 (I) Road Markings Thermo-Plastic Road Markings LM 30000.00 30,000.00 - - 0.00% - - 0.00% - - 0.00% -
MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum
Thickness)
Supply materials and apply thermoplastic road marking, straight or
gentle curve, solid or dashed line after cleaning and preparing the
surface as required.
Yellow Thermoplastic Road marking 150mm Wide

APPENDIX A-INVOICE BREAKDOWN 6 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Thermo-Plastic Road Markings

ZF.I.G.41 (I) Road Markings MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum LM 7500.00 7,500.00 - - 0.00% - - 0.00% - - 0.00% -
Thickness)
Supply materials and apply thermoplastic road marking, straight or
gentle curve, solid or dashed line after cleaning and preparing the
surface as required.

Yellow Thermoplastic Road marking 200mm Wide

Thermo-Plastic Road Markings

ZF.I.E.54 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 250.00 250.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 0.5 mm thickness existing marking ; 100 mm wide

ZF.I.H.55 (I) Road Markings LM 65000.00 65,000.00 - - 0.00% - - 0.00% - - 0.00% -

Thermo-Plastic Road Markings
REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING
MARKINGS
Supply material and apply straight or gentle curve white or yellow
thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.
Over 0.5 mm thickness existing marking ; 120 mm wide

Thermo-Plastic Road Markings

ZF.I.H.56 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 65000.00 65,000.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 0.5 mm thickness existing marking ; 150 mm wide

Thermo-Plastic Road Markings

ZF.I.H.57 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 17500.00 17,500.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 0.5 mm thickness existing marking ; 200 mm wide

APPENDIX A-INVOICE BREAKDOWN 7 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Thermo-Plastic Road Markings

ZF.I.E.59 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 1.0 mm thickness existing marking ; 100 mm wide

Thermo-Plastic Road Markings

ZF.I.E.60 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 1.0 mm thickness existing marking ; 120 mm wide

Thermo-Plastic Road Markings

ZF.I.E.61 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 1.0 mm thickness existing marking ; 150 mm wide

Thermo-Plastic Road Markings

ZF.I.E.62 (I) Road Markings REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MARKINGS

Supply material and apply straight or gentle curve white or yellow

thermoplastic road marking, solid or dashed line after cleaning and
preparing the surface as required.

Over 1.0 mm thickness existing marking ; 200 mm wide

ZF.I.H.66 (I) Road Markings m2 4000.00 4,000.00 - - 0.00% - - 0.00% - - 0.00% -

Thermo-Plastic Road Markings
REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING
MARKINGS
HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness)
Supply and apply thermo-plastic marking, straight or gentle curve,
solid or dashed line, after cleaning and preparing the surface as
required.
white thermo-plastic marking

APPENDIX A-INVOICE BREAKDOWN 8 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

ZF.I.F.67 (I) Road Markings m2 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -

Thermo-Plastic Road Markings
REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING
MARKINGS
HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness)
Supply and apply thermo-plastic marking, straight or gentle curve,
solid or dashed line, after cleaning and preparing the surface as
required.
Yellow thermo-plastic marking

Thermo-Plastic Road Markings

ZF.I.H.81 (I) Road Markings LM 5500.00 5,500.00 - - 0.00% - - 0.00% - - 0.00% -
REPAINTING THERMOPLASTIC ROAD MARKING OVER EXISTING
MARKINGS

White Thermoplastic 500 mm wide

Thermo-Plastic Road Markings

ZF.I.E.89 (I) Road Markings Rumble Strip Markings LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
MACHINE LAID MARKING (EXTRUDE TYPE, (2.0 ± 0.3 mm) Minimum
Thickness)

6 mm thick and 300 mm wide

Thermo-Plastic Road Markings

ZF.I.E.90 (I) Road Markings LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Rumble Strip Markings

Supply and apply yellow thermoplastic Rumble strip marking, after

cleaning and preparing the surface as required

8 mm thick and 300 mm wide

Thermo-Plastic Road Markings

ZF.I.E.91 (I) Road Markings LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Rumble Strip Markings

Supply and apply yellow thermoplastic Rumble strip marking, after

cleaning and preparing the surface as required

10 mm thick and 300 mm wide

ZF.I.H.131 (I) Road Markings NR 750.00 750.00 - - 0.00% - - 0.00% - - 0.00% -

Thermo-Plastic Road Markings
Miscellaneous Markings
Supply and apply regular shapes triangle, rectangular, Arrows with
White thermoplastic marking, including supply of material, after
cleaning and preparing the surface as required.
Give Way Triangle

ZF.I.H.132 (I) Road Markings NR 750.00 750.00 - - 0.00% - - 0.00% - - 0.00% -

Thermo-Plastic Road Markings
Miscellaneous Markings
Supply and apply regular shapes triangle, rectangular, Arrows with
White thermoplastic marking, including supply of material, after
cleaning and preparing the surface as required.
Arrow, 6m long

APPENDIX A-INVOICE BREAKDOWN 9 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Thermo-Plastic Road Markings

ZF.I.F.133 (I) Road Markings Miscellaneous Markings NR 125.00 125.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply regular shapes triangle, rectangular, Arrows with

White thermoplastic marking, including supply of material, after
cleaning and preparing the surface as required.

Arrow, 16m long

Thermo-Plastic Road Markings

ZF.I.F.135 (I) Road Markings Miscellaneous Markings NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply regular shapes triangle, rectangular, Arrows with

White thermoplastic marking, including supply of material, after
cleaning and preparing the surface as required.

Warning Arrow

Thermo-Plastic Road Markings

ZF.I.E.138 (I) Road Markings m2 15.00 15.00 - - 0.00% - - 0.00% - - 0.00% -
Miscellaneous Markings

Handicap Logo

Thermo-Plastic Road Markings

ZF.I.E.139 (I) Road Markings m2 5.00 5.00 - - 0.00% - - 0.00% - - 0.00% -
Miscellaneous Markings

Bicycle Logo

Thermo-Plastic Road Markings

ZF.I.E.140 (I) Road Markings m2 5.00 5.00 - - 0.00% - - 0.00% - - 0.00% -
Miscellaneous Markings

Marking of Texts with Yellow or White thermo-plastic marking

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.F.193 (I) Road Markings Thickness) LM 500.00 500.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

White - 100mm Wide

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.194 (I) Road Markings Thickness) LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

White - 120mm Wide

APPENDIX A-INVOICE BREAKDOWN 10 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.195 (I) Road Markings Thickness) LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

White - 150mm Wide

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.196 (I) Road Markings Thickness) LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

White - 200mm Wide

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.198 (I) Road Markings Thickness) LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

Yellow - 100mm Wide

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.199 (I) Road Markings Thickness) LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

Yellow - 120mm Wide

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.E.200 (I) Road Markings Thickness) LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

Yellow - 150mm Wide

Cold Plastic Road Markings

MACHINE LAID MARKING (SCREED TYPE, (2.0 ± 0.3 mm Minimum

ZF.I.G.201 (I) Road Markings Thickness) LM 1000.00 1,000.00 - - 0.00% - - 0.00% - - 0.00% -

Supply materials and apply cold plastic road marking, straight or

gentle curve, solid or dashed line after cleaning and preparing the
surface as required

Yellow - 200mm Wide

APPENDIX A-INVOICE BREAKDOWN 11 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Cold Plastic Road Markings

ZF.I.F.209 (I) Road Markings HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness) LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply white cold-plastic marking, straight or gentle curve,

solid or dashed line, after cleaning and preparing the surface as
required.

White 500mm Wide

Cold Plastic Road Markings

ZF.I.E.213 (I) Road Markings LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness)

Supply and apply yellow cold plastic Rumble strip marking, after
cleaning and preparing the surface as required

Yellow - 8mm thick - 300mm Wide

Cold Plastic Road Markings

ZF.I.E.214 (I) Road Markings LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness)

Supply and apply yellow cold plastic Rumble strip marking, after
cleaning and preparing the surface as required

Yellow - 10mm thick - 300mm Wide

Cold Plastic Road Markings

ZF.I.E.218 (I) Road Markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness)

Supply and apply cold-plastic marking, straight or gentle curve, solid

or dashed line, after cleaning and preparing the surface as required.

white cold-plastic marking

ZF.I.E.219 (I) Road Markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Cold Plastic Road Markings

HAND LAID MARKING, (2.0 ± 0.3 mm Minimum Thickness)
Supply and apply cold-plastic marking, straight or gentle curve, solid
or dashed line, after cleaning and preparing the surface as required.
Yellow cold-plastic marking

Cold Plastic Road Markings

ZF.I.E.272 (I) Road Markings Audio tactile profile road marking LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply audio tactile profile road marking using an
approved type cold-plastic road marking paint, straight or gentle
curve in specified colour solid or dashed line after cleaning and
preparing the surface as required.

150 mm wide (Ribs shall be 120 mm wide and 8 or 11 height as

instructed by the engineer); 250mm spacing

APPENDIX A-INVOICE BREAKDOWN 12 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Cold Plastic Road Markings

ZF.I.E.273 (I) Road Markings Audio tactile profile road marking LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply audio tactile profile road marking using an
approved type cold-plastic road marking paint, straight or gentle
curve in specified colour solid or dashed line after cleaning and
preparing the surface as required.

150 mm wide (Ribs shall be 120 mm wide and 8 or 11 height as

instructed by the engineer); 500mm spacing

Cold Plastic Road Markings

ZF.I.E.276 (I) Road Markings Audio tactile profile road marking LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply audio tactile profile road marking using an
approved type cold-plastic road marking paint, straight or gentle
curve in specified colour solid or dashed line after cleaning and
preparing the surface as required.

200 mm wide (Ribs shall be 120 mm wide and 8 or 11 height as

instructed by the engineer); 250mm spacing

Cold Plastic Road Markings

ZF.I.H.277 (I) Road Markings Audio tactile profile road marking LM 11000.00 11,000.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply audio tactile profile road marking using an
approved type cold-plastic road marking paint, straight or gentle
curve in specified colour solid or dashed line after cleaning and
preparing the surface as required.

200 mm wide (Ribs shall be 120 mm wide and 8 or 11 height as

instructed by the engineer); 500mm spacing

Cold Plastic Road Markings

ZF.I.E.286 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 8mm Rib Height - 250mm Spacing and 160mm rib width

Cold Plastic Road Markings

ZF.I.E.287 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 8mm Rib Height - 250mm Spacing and 120mm rib width

APPENDIX A-INVOICE BREAKDOWN 13 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Cold Plastic Road Markings

ZF.I.E.289 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 11mm Rib Height - 250mm Spacing and 160mm rib width

Cold Plastic Road Markings

ZF.I.E.290 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 11mm Rib Height - 250mm Spacing and 120mm rib width

Cold Plastic Road Markings

ZF.I.H.293 (I) Road Markings NR 8500.00 8,500.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 8mm Rib Height - 500mm Spacing and 160mm rib width

Cold Plastic Road Markings

ZF.I.E.294 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 8mm Rib Height - 500mm Spacing and 120mm rib width

Cold Plastic Road Markings

ZF.I.E.296 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 11mm Rib Height - 500mm Spacing and 160mm rib width

APPENDIX A-INVOICE BREAKDOWN 14 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Cold Plastic Road Markings

ZF.I.E.297 (I) Road Markings NR 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Raised rib edge lining

Supply and apply raised rib edge lining using an approved type cold-
plastic road marking paint with reflectorized solid glass beads
incorporated into the mixture and apply to the wet surface of the
material during application process.

For 11mm Rib Height - 500mm Spacing and 120mm rib width

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.F.317 (I) Road Markings Supply and apply approved type water-borne road marking paint, LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 100 Microns dry film (without glass beads)

100mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.F.318 (I) Road Markings Supply and apply approved type water-borne road marking paint, LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 100 Microns dry film (without glass beads)

120mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.H.319 (I) Road Markings Supply and apply approved type water-borne road marking paint, LM 1000.00 1,000.00 - - 0.00% - - 0.00% - - 0.00% -
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 100 Microns dry film (without glass beads)

150mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.F.320 (I) Road Markings Supply and apply approved type water-borne road marking paint, LM 250.00 250.00 - - 0.00% - - 0.00% - - 0.00% -
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 100 Microns dry film (without glass beads)

200mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.322 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 375 - 400 Microns dry film (with glass beads of class B')

100mm Wide

APPENDIX A-INVOICE BREAKDOWN 15 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.323 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 375 - 400 Microns dry film (with glass beads of class B')

120mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.324 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 375 - 400 Microns dry film (with glass beads of class B')

150mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.325 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 375 - 400 Microns dry film (with glass beads of class B')

200mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.327 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 400 - 500 Microns dry film (with glass beads of class B')

100mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.328 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 400 - 500 Microns dry film (with glass beads of class B')

120mm Wide

APPENDIX A-INVOICE BREAKDOWN 16 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.G.329 (I) Road Markings LM 750.00 750.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 400 - 500 Microns dry film (with glass beads of class B')

150mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.330 (I) Road Markings LM 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply approved type water-borne road marking paint,
straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

For 400 - 500 Microns dry film (with glass beads of class B')

200mm Wide

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.333 (I) Road Markings WATER-BORNE TRAFFIC MARKING PAINT m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply approved type water-borne road marking paint,

straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

100 Microns dry film (without glass beads)

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.334 (I) Road Markings WATER-BORNE TRAFFIC MARKING PAINT m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply approved type water-borne road marking paint,

straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

375 - 400 Microns dry film (with glass beads of class B')

WATER-BORNE TRAFFIC MARKING PAINT

ZF.I.E.335 (I) Road Markings WATER-BORNE TRAFFIC MARKING PAINT m2 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply approved type water-borne road marking paint,

straight or gentle curve in specified colour solid or dashed line after
cleaning and preparing the surface as required.

400 - 500 Microns dry film (with glass beads of class B')

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.E.343 (I) Road Markings beads) NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Give Way Triangle

APPENDIX A-INVOICE BREAKDOWN 17 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.E.345 (I) Road Markings beads) NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Arrow, 16m long

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.E.346 (I) Road Markings beads) NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Arrow, 32m long

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.E.347 (I) Road Markings beads) NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Warning Arrow

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.G.350 (I) Road Markings beads) m2 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Handicap Logo

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.G.351 (I) Road Markings beads) m2 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Bicycle Logo

APPENDIX A-INVOICE BREAKDOWN 18 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 100 Microns dry film (without glass

ZF.I.G.352 (I) Road Markings beads) m2 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Any Texts or Others Etc

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 375 - 400 Microns dry film (with glass
ZF.I.E.358 (I) Road Markings beads of class B') NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Give Way Triangle

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 375 - 400 Microns dry film (with glass
ZF.I.F.359 (I) Road Markings beads of class B') NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Arrow, 6m long

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 375 - 400 Microns dry film (with glass
ZF.I.E.360 (I) Road Markings beads of class B') NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Arrow, 16m long

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 375 - 400 Microns dry film (with glass
ZF.I.E.361 (I) Road Markings beads of class B') NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Arrow, 32m long

APPENDIX A-INVOICE BREAKDOWN 19 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

WATER-BORNE TRAFFIC MARKING PAINT

Miscellaneous Markings - For 375 - 400 Microns dry film (with glass
ZF.I.E.362 (I) Road Markings beads of class B') NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking in regular shapes, arrows, texts or

symbols etc., specified colours using an approved type water-bond
road marking paint after cleaning and preparing the surface as
required.

Warning Arrow

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.E.400 (I) Road Markings Solvent based road markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking, straight or gentle curve in specified

colour solid or dashed line using an approved type of road marking
cold paint after cleaning and preparing the surface as required.

For 100 Microns dry film (without glass beads )

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.G.401 (I) Road Markings Solvent based road markings m2 300.00 300.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking, straight or gentle curve in specified

colour solid or dashed line using an approved type of road marking
cold paint after cleaning and preparing the surface as required.

For 375 Microns dry film (with glass beads of class B')

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.E.405 (I) Road Markings Solvent based road markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking, to regular shapes such as triangle,

rectangular, arrow etc. in specified colour solid filling using an
approved type of road marking cold paint after cleaning and
preparing the surface as required.

For 100 Microns dry film (without glass beads )

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.E.406 (I) Road Markings Solvent based road markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply road marking, to regular shapes such as triangle,

rectangular, arrow etc. in specified colour solid filling using an
approved type of road marking cold paint after cleaning and
preparing the surface as required.

For 375 Microns dry film (with glass beads of class B')

SOLVENT BASED ROAD MARKINGS PAINT

Solvent based road markings

ZF.I.E.410 (I) Road Markings LM 350.00 350.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply Kerb painting of two-coats in black and white or
any other colour as instructed using an approved type of marking
paint with primer on new surface after cleaning and preparing as
required.

12.5 CM

APPENDIX A-INVOICE BREAKDOWN 20 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

SOLVENT BASED ROAD MARKINGS PAINT

Solvent based road markings

ZF.I.E.411 (I) Road Markings LM 500.00 500.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply Kerb painting of two-coats in black and white or
any other colour as instructed using an approved type of marking
paint with primer on new surface after cleaning and preparing as
required.

15 CM

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.E.415 (I) Road Markings Solvent based road markings LM 500.00 500.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply Kerb painting with two-coats in black and white or
any other colour as instructed, using an approved type of marking
paint on the existing painted kerb stone after cleaning and preparing
the surface as required.

12.5 CM

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.H.416 (I) Road Markings Solvent based road markings LM 20000.00 20,000.00 - - 0.00% - - 0.00% - - 0.00% -

Supply and apply Kerb painting with two-coats in black and white or
any other colour as instructed, using an approved type of marking
paint on the existing painted kerb stone after cleaning and preparing
the surface as required.

15 CM

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.H.423 (I) Road Markings m2 750.00 750.00 - - 0.00% - - 0.00% - - 0.00% -
Solvent Traffic Marking Paint

Supply and apply approved type marking paint black and white or
any other colour as instructed on the surface of Concrete Barriers,
VB units, walls or other concrete surfaces as instructed after cleaning
and preparing the surface as required.

SOLVENT BASED ROAD MARKINGS PAINT

ZF.I.E.427 (I) Road Markings LM 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Solvent Traffic Marking Paint

Washing of existing kerb paint at junctions with approved means,

using jet washing machine.

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.439 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Single Piece studs - Size 100x100x19.8

Uni-directional

APPENDIX A-INVOICE BREAKDOWN 21 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.440 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Single Piece studs - Size 100x100x19.8

Bi-directional

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.442 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Single Piece studs - Size 150x150x19.8

Uni-directional

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.443 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Single Piece studs - Size 150x150x19.8

Bi-directional

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.445 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Two parts studs - Size 100x100x19.8

Uni-directional

APPENDIX A-INVOICE BREAKDOWN 22 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.446 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Two parts studs - Size 100x100x19.8

Bi-directional

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.448 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Two Parts studs - Size 150x150x19.8

Uni-directional

REFLECTIVE TYPE ROAD STUDS

Supply and install of pin-type reflective road studs, as required by

ZF.I.E.449 (I) Road Markings the engineer, aluminium body with 43 or 31 glass elements as NR 50.00 50.00 - - 0.00% - - 0.00% - - 0.00% -
specified by the engineer and anchor shank of min 75 mm in
combinations of reflectors in colours of red, white, green, amber etc
as required using approved epoxy adhesive (two component) as per
the approved method statements of application incompliance to the
manufacturers product guide lines.

Two Parts studs - Size 150x150x19.8

Bi-directional

REFLECTIVE TYPE ROAD STUDS

ZF.I.E.452 (I) Road Markings NR 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
REFLECTIVE TYPE ROAD STUDS

Remove existing pin type road stud, return studs to Ashghal store,
reinstate, clean and dispose of the debris.

Cleaning, Removal and Retexturing of Road Markings

ZF.I.E.470 (I) Road Markings Cleaning, Removal and Re-Texturing of Thermoplastic Road Markings m2 200.00 200.00 - - 0.00% - - 0.00% - - 0.00% -
using Water Blasting Method (Please refer the project specification -
clause section C, Part 2)

Removal of defected existing or faded road markings using the

above system or equivalent approved system

APPENDIX A-INVOICE BREAKDOWN 23 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Cleaning, Removal and Retexturing of Road Markings

ZF.I.E.471 (I) Road Markings Cleaning, Removal and Re-Texturing of Thermoplastic Road Markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
using Water Blasting Method (Please refer the project specification -
clause section C, Part 2)

Cleaning/washing of existing road markings using with above system

or equivalent approved system

Cleaning, Removal and Retexturing of Road Markings

ZF.I.E.476 (I) Road Markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Removal of Cold plastic markings by water jet or approved method

Normal straight, curved etc lines

Cleaning, Removal and Retexturing of Road Markings

ZF.I.G.477 (I) Road Markings m2 2500.00 2,500.00 - - 0.00% - - 0.00% - - 0.00% -
Removal of Cold plastic markings by water jet or approved method

Profile type markings as lines with ribs (cold plastic)

Cleaning, Removal and Retexturing of Road Markings

ZF.I.E.480 (I) Road Markings NR 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Only ribs - audio tactile markings

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

Major Roundabouts and other critical locations:
ZF.I.F.489 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MACHINE LAID THERMOPLASTIC MARKING (SCREED TYPE, (2.0 ± 0.3
mm Minimum Thickness)

Supply and apply Yellow thermoplastic Markings straight or curve

and solid or dashed line after cleaning and preparing the surface as
required.

Yellow Thermoplastic Road marking 150mm Wide

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

Major Roundabouts and other critical locations:
ZF.I.F.490 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MACHINE LAID THERMOPLASTIC MARKING (SCREED TYPE, (2.0 ± 0.3
mm Minimum Thickness)

Supply and apply Yellow thermoplastic Markings straight or curve

and solid or dashed line after cleaning and preparing the surface as
required.

Yellow Thermoplastic Road marking 200mm Wide

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

Major Roundabouts and other critical locations:
ZF.I.F.494 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MACHINE LAID THERMOPLASTIC MARKING (SCREED TYPE, (2.0 ± 0.3
mm Minimum Thickness)

Supply and apply White thermoplastic after cleaning and preparing

the surface as required

Delineation Line Markings – 150 mm

APPENDIX A-INVOICE BREAKDOWN 24 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

Major Roundabouts and other critical locations:
ZF.I.F.495 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
MACHINE LAID THERMOPLASTIC MARKING (SCREED TYPE, (2.0 ± 0.3
mm Minimum Thickness)

Supply and apply White thermoplastic after cleaning and preparing

the surface as required

Line Markings – 120 mm

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

Major Roundabouts and other critical locations:
ZF.I.H.502 (I) Road Markings m2 5000.00 5,000.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID THERMOPLASTIC MARKING, (2.0 ± 0.3 mm Minimum
Thickness)

Supply and apply white thermoplastic after cleaning and preparing

the surface as required.

Pedestrian Crossing Markings

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

Major Roundabouts and other critical locations:
ZF.I.H.503 (I) Road Markings m2 1500.00 1,500.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID THERMOPLASTIC MARKING, (2.0 ± 0.3 mm Minimum
Thickness)

Supply and apply white thermoplastic after cleaning and preparing

the surface as required.

500 mm wide (stop line)

ZF.I.E.504 (I) Road Markings Thermo-Plastic / Cold Plastic Road Markings on Major junctions, m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Major Roundabouts and other critical locations:
HAND LAID THERMOPLASTIC MARKING, (2.0 ± 0.3 mm Minimum
Thickness)
Supply and apply white thermoplastic after cleaning and preparing
the surface as required.
Supply and apply Yellow / white thermoplastic Markings straight or
curve and solid or dashed line after cleaning and preparing the
surface as required

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

ZF.I.E.507 (I) Road Markings Major Roundabouts and other critical locations: NR 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID THERMOPLASTIC MARKING, (2.0 ± 0.3 mm Minimum
Thickness)

Give Way Triangle

Thermo-Plastic / Cold Plastic Road Markings on Major junctions,

ZF.I.E.508 (I) Road Markings Major Roundabouts and other critical locations: NR 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
HAND LAID THERMOPLASTIC MARKING, (2.0 ± 0.3 mm Minimum
Thickness)

Arrow, 6m long

APPENDIX A-INVOICE BREAKDOWN 25 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Kerb Painting
ZF.I.E.515 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply Kerb painting with two coats in black and white or
any other colour as instructed, using an approved type of marking
paint on the new or existing painted kerb stone after primer,
cleaning and preparing the surface as required.

12.5 CM

Kerb Painting
ZF.I.F.516 (I) Road Markings LM 1500.00 1,500.00 - 15,484.00 0.00% - 15,484.00 0.00% - - 0.00% -
Supply and apply Kerb painting with two coats in black and white or
any other colour as instructed, using an approved type of marking
paint on the new or existing painted kerb stone after primer,
cleaning and preparing the surface as required.

15 CM

MACHINE LAID COLD PLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.F.523 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply Yellow cold plastic Markings straight or curve and
solid or dashed line after cleaning and preparing the surface as
required

Yellow coldplastic Road marking 150mm Wide

MACHINE LAID COLD PLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.F.524 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply Yellow cold plastic Markings straight or curve and
solid or dashed line after cleaning and preparing the surface as
required

Yellow coldplastic Road marking 200mm Wide

MACHINE LAID COLD PLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.F.528 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Provide and apply White cold plastic Markings after cleaning and
preparing the surface as required

Delineation Line Markings – 150 mm

MACHINE LAID COLD PLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.F.529 (I) Road Markings LM 100.00 100.00 - - 0.00% - - 0.00% - - 0.00% -
Provide and apply White cold plastic Markings after cleaning and
preparing the surface as required

Line Markings – 120 mm

Removal and Cleaning of Thermoplastic Road Markings

ZF.I.G.535 (I) Road Markings m2 3000.00 3,000.00 - - 0.00% - - 0.00% - - 0.00% -
Remove existing thermoplastic road marking from the carriageway
using water blasting method or any other approved method as per
engineer instructions

Removal and Cleaning of Thermoplastic Road Markings

ZF.I.E.536 (I) Road Markings m2 25.00 25.00 - - 0.00% - - 0.00% - - 0.00% -
Cleaning of markings on signalized Junction Boxes using water
blasting method or any approved method as per engineer
instructions

APPENDIX A-INVOICE BREAKDOWN 26 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

ZF.I.E.543 (I) Road Markings HAND LAID COLDPLASTIC MARKING, (2.0 ± 0.3 mm Minimum m2 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -
Thickness)
Supply and apply white cold plastic after cleaning and preparing the
surface as required
Pedestrian Crossing Markings

HAND LAID COLDPLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.E.544 (I) Road Markings m2 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply white cold plastic after cleaning and preparing the
surface as required

500 mm wide (stop line)

HAND LAID COLDPLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.E.545 (I) Road Markings m2 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply white cold plastic after cleaning and preparing the
surface as required

Supply and apply Yellow / white coldplastic Markings straight or

curve and solid or dashed line after cleaning and preparing the
surface as required

HAND LAID COLDPLASTIC MARKING, (2.0 ± 0.3 mm Minimum

Thickness)
ZF.I.H.546 (I) Road Markings m2 1500.00 1,500.00 - - 0.00% - - 0.00% - - 0.00% -
Supply and apply white cold plastic after cleaning and preparing the
surface as required

Remove existing cold plastic road marking from the carriageway

using water blasting method or any other approved method as per
engineer instructions

HAND LAID COLDPLASTIC MARKING, (2.0 ± 0.3 mm Minimum

ZF.I.E.549 (I) Road Markings Thickness) NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Give Way Triangle

HAND LAID COLDPLASTIC MARKING, (2.0 ± 0.3 mm Minimum

ZF.I.E.550 (I) Road Markings Thickness) NR 10.00 10.00 - - 0.00% - - 0.00% - - 0.00% -

Arrow, 6m long

Surface Coloring application to the road surfaces, concreter surfaces

as Bus lanes, Bicycle lanes, foot paths, hard landscaping and any
other surfaces with cold plastic (Two component (2k)) material
standards shall comply with Physical properties EN 1871:2000,
ZF.I.E.554 (I) Road Markings Laboratory methods for the identification of road marking materials m² 22.00 22.00 - - 0.00% - - 0.00% - - 0.00% -
EN 12802:201, Performance requirements standards
EN1436:2009+A1:2009

Supply material and apply surface coloring into approved

application methods as per approved by the Engineer or his
representative and to follow the manufacture guide lines after
cleaning, preparation of surface. Color of the material to be
approved by the Engineer or his representative prior to apply surface
coloring

Spray method of application (Dry film thickness shall be Min 650

microns)

APPENDIX A-INVOICE BREAKDOWN 27 / 30 ZONAL INSPECTIONS FOR INNER DOHA

CONTRACT INCLUDING ANY Vos ACTUAL WORK DONE
Cumulativ Current Previous
Adjusted Contract
Reference Header Description Unit Rate (QAR) QUANTITY
Amount (QAR) e Total To Period Cumulati
Date ve Total
Original VO 1 VO 2 Adjusted Qty % Amount Qty % Amount Qty % Amount

Surface Coloring application to the road surfaces, concreter surfaces

as Bus lanes, Bicycle lanes, foot paths, hard landscaping and any
other surfaces with cold plastic (Two component (2k)) material
standards shall comply with Physical properties EN 1871:2000,
ZF.I.E.555 (I) Road Markings Laboratory methods for the identification of road marking materials m² 22.00 22.00 - - 0.00% - - 0.00% - - 0.00% -
EN 12802:201, Performance requirements standards
EN1436:2009+A1:2009

Supply material and apply surface coloring into approved

application methods as per approved by the Engineer or his
representative and to follow the manufacture guide lines after
cleaning, preparation of surface. Color of the material to be
approved by the Engineer or his representative prior to apply surface
coloring

Screed / Squeeze and Roll method of application (Dry film thickness

shall be Min 1 mm)

TOTAL CARRIED FORWARD TO INVOICE SUMMARY #VALUE! - - -

APPENDIX A-INVOICE BREAKDOWN 28 / 30 ZONAL INSPECTIONS FOR INNER DOHA

 ZONAL FRAMEWORK CONTRACT FOR ROAD MAINTENANCE QATAR , ZONAL INSPECTIONS FOR INNER DOHA - 004
PROJECT No : AA ROM 2017 203 G
Quantity Calculation for Markhiya
Summary - Concrete Protection.

Item No.ZF.H.H.52:- (Area = 11.88 m³) Concrete Protection Around Manhole.

Item No.ZF.K.H.79 :- (Area = 300 m) Expose and provide concrete protection

(a) (b) (D)

ZF.H.H.52
Sl.No. locations Area ZF.K.H.79 (M)
Length-1 (m) Width -1 (m) (M3)
D= a x b (m ) 2

=((22/7)*((2.4/2)*(2.4/2)))-
1 Markhiya Wo #11650289 ((22/7)*((1.8/2)*(1.8/2)))*1.5 11.88 300.00

QUANTITY 11.88 300.00

OR INNER DOHA - 004

PHOTO