o m

OM02 HIRES
. c
4U
Special CCD Cameras Image Processing Technologies
for PCB Inspection
e t
e TECHNICAL SPECIFICATIONS
Sh CCD Camera
• Sensor: CCD 1/3”

a ta • Standard video:
• Number of pixel:
CCIR B/W
795 Hor. x 596 Ver.

.D • Scanning System:
• Video out:
625 lines 50 fields/sec
1 Volt p-p / 75 Ohm
w • Shutter: 1/50—1/120.000 automatic
w • S/N: 52 –60 dB (AGC off)
w • Iris:
• AGC:
automatic esp.
ON /OFF

Optics
• Objective:
• Working area :
o m
fixed focus telecentric

.c
8 x 10.6 ( 4x5.3 Zoom) mm Standard
3.6 x 4.8 (1.8x2.4 Zoom) mm Laser
2.2 x 2.9 (1.1x1.4 Zoom) mm BGA
OM02 HIRES CCD camera
In an anodized aluminum block which is vibration

4 U
• Working distance: 41 mm (± 12) Standard
31.5 mm (± 2.5) Laser
43.5 mm (± 1.5) BGA
resistant and dust protected are mounted a CCD
camera, a telecentric objective, a near infrared
illuminator and an optical filter which has a
transmission peak at the illuminator wavelength.
e t
Material
• Black anodized aluminum
Illuminator IR LED

e
• Wavelength: 880 nm
The illuminator radiation passes through the filter • Number of LEDs: 18 in a ring dia. 21 mm

h
but the camera receives only the backscattered • Illum. angle: 20°
light from the object of the same wavelength. So, • Lum. intensity: >20 mW/sr / LED

S
the visible environmental light is cut-off. Dimensions (mm, included connectors)
The connections for power in and signal out are Standard : 128 x 54 x 48

a
made with connectors fixed by screws. Laser : 140 x 54 x 48

t
The CCD cameras OM02 are designed for the BGA : 140 x 54 x 48
Power in
inspection and the alignment with high precision
of PCBs (Printed Circuit Boards) during their
manufacturing process (layers stacking, pressing,
a • +12 Volt – 250 mA
Connectors
• DIN SKV 5p M

.D
cutting, drilling, etc.). for power in CCD and LED
The use of a telecentric optics is very important to for zoom, AGC and mirror on/off signal input
reduce perspective errors and to obtain constant • TNC for video out

w
magnification in spite of the fact that the PCB
changes its distance from the optics, due to the

w
change of thickness of multi-layers.
The CCD cameras OM02 are manufactured with
three working areas: Standard 8 x 10.6 (4x 5.3

w
with zoom 2X active) mm Laser 3.6 x 4.8 (1.8 x
2.4) mm e BGA 2.3 x 3 (1.1 x 1.5 ) mm.
Being the working areas so small it is possible to
detect images with high resolution and to m
process them for micrometric measurements.
c o
.
4U
Connectors
How to order:
8S0965/S : OM02 Hires Standard
e t
8S0965/L : OM02 Hires Laser
8S0965/B : OM02 Hires BGA h e
8S0765 : Coax. Cable 5 m BNC-BNC
a S
at
8S0966 : Power Cable 5 m DIN 5P F -DSUB 9

Sinartis S.r.l. via A. Moro 10/b 21012 Cassano Magnago (Va) Italy .D
w
tel. +39-0331-282257 fax +39-0331-202950
w
www.sinartis.it e-mail sinartis@sinartis.it
Technical Data Sheet OM02H JAN 2003 w
OM02 HIRES
Special CCD Cameras Image Processing Technologies
for PCB Inspection

APPLICATION NOTE
Special CCD cameras OM02 for PCBs inspection PC BASED processing
can be used in a kit which includes electronic
boards with image capture and processing In this configuration the OM02 camera is delivered in
software manufactured by Sinartis. a kit with the frame grabber Sincapt-II for video
Depending on the application, it is possible to capture and image transfer in real time to a host PC
choose between a stand-alone solution or a PC- memory by standard PCI interface (Peripheral
based one. In both cases, software is available to Component Interface).
find the PCB reference pad and to calculate its Sincapt-II has driver compatibility for Windows
geometrical center with very high (sub-pixeling ) 95/98, Windows XP, Windows 2000, LINUX and it is
precision and repeatability of (≈±1 µm). software supported for C/C++ languages and
compilers.
On request, SW libraries SinIMAGE.lib are
STAND ALONE processing
available for advanced image processing algorithms
(no PC required) which are optimized for the measurement of PCB
pads.
In this configuration the OM02 camera is delivered
in a kit with the DSP (Digital Signal Processor)
board Sindsp-5409 or with the Video Processor
apparatus Sinpatt.
A proprietary software to process the PCB pads
is pre-loaded on a Flash EPROM memory and it
executed by the DSP processor.
The data communication with a control unit (CNC,
PLC etc.) is made by RS-232 or RS-485 standard
serial interfaces following a specified protocol
which is delivered to the customer. KIT OM02 with Sincapt-II frame grabber
It is possible to have as input up to four CCDs
cameras in multiplexing mode. As outputs, in
addition to the standard serial interfaces, there is
a monitor output with overlay graphics.

PC based image acquisition

HOW TO ORDER
8S0918/S/L/B:Kit OM02H+Sindsp5409+FW
8S0919/S/L/B:Kit OM02H+ SincaptII+Drivers+OM02
KIT OM02 with Sindsp-5409 DSP board + SW SinSample (C++ source code)
8S0920/S/L/B:Kit OM02H + Sinpatt V.P.+ FW
8S0887: Cable 3 m DIN 5P F e TNC– DSUB15M Sincapt
8S0890: Cable 3 m DIN 5P F e TNC– DSUB15M Sindsp
8S0507: Cable coax. video 5 m BNC-TNC
8S0825: Cable coax. video 5 m BNC-BNC for monitor
8S0892: Cable coax. video 5 m TNC-RCA for Sincapt
8S0853: External power supply for Sinpatt
Sinpatt Video Processor 110711: SinImage.lib SW library for advanced image
processing (C/C++, Visual C/C++)

Sinartis S.r.l. via A. Moro 10/b 21012 Cassano Magnago (Va) Italy
tel. +39-331-282257 fax +39-331-202950
www.sinartis.it e-mail sinartis@sinartis.it
Technical Data Sheet OM02HZ JAN 2003