SDS Brilliant S110

Brilliant S110
Safety Data Sheet

__________________________________________________________________________________
1. Product and Company Identification

Product Name: Brilliant S110
Technical Description: Polyester Resin
Principal Uses: One component of a two component laminating adhesive
Manufacturer’s Name: Brilliant Polymers Pvt. Ltd., Plot 15,16,21/4 MIDC Morivali, Ambernath (West), Thane
421 505, India. Emergency Telephone Number: +91 251 350 2000. Website: www.brilliantpolymers.com
2. Hazards Classification
3. 2.1 Classification according to GHS:
HAZARD CLASS HAZARD CATEGORY HAZARD STATEMENT

Not Classified as Hazardous ----- ------
2.2 Label Elements: (According to GHS)

Signal Word: NA
Pictogram:
NO GHS NO GHS NO GHS

SYMBOL SYMBOL SYMBOL
Hazard Statements:
Not Classified as hazardous
Precautionary Statements Prevention
Normal Precautions
Precautionary Statements storage and disposal
P501 dispose off container in accordance with local regulations
For professional users only
2.3 Other Hazards: There is no additional information.
Brilliant Polymers Pvt. Ltd.

Registered Office: 78 Jolly Maker Chambers II, Nariman Point, Mumbai 400021, India. P: +91 22 22040181
Corporate Office and Factory: Plot 15,16,21/4, MIDC Morivali, Ambernath (West), Thane 421 505, India.
P: + 91 251 350 2000 E: info@brilliantpolymers.com www.brilliantpolymers.com
3. Composition / Information on Ingredients
Chemical Name CAS Registry Number Weight (%)
Polyester Resin - 100%
4. First Aid Measures

Inhalation: If mist or vapour of this product is inhaled, remove person immediately to fresh
air. Seek medical assistance if symptoms developed or persist.
Skin Contact: Remove contaminated clothing and footwear. Flush with large amounts of water.
Seek immediate medical attention.
Eye Contact: Immediately rinse with plenty of water for 15 minutes. Seek immediate medical
attention.
Ingestion: Get immediate medical attention. DO NOT induce vomiting unless directed by
physician.
5. Fire Fighting Measures

Extinguishing Media: Common agents like foam, alcohol foam, carbon dioxide, or dry chemical powder,
as appropriate, in consideration of surrounding material.
Unusual Fire /explosions: Product itself does not burn. Any fire extinguishing action appropriate to
surrounding.
Hazardous combustion: None known
6. Accidental Release Measures

Use Personal protection recommended in section 8, isolate the hazard area deny entry to unnecessary and
unprotected personnel.
Environmental Precautions: Prevent further leakage or spillage if safe to do so. Ensure proper disposal of
waste after cleaning of area post hazard management.
Clean-up methods: Absorb spill with inert material. Shovel material into appropriate container for
disposal. Dispose of according to Federal, State and local government
regulations.
7. Handling and Storage

Handling: Follow personal safety cautions to avoid contact with eye, skin or clothing. Container
shall be supported and grounded before opening, dispensing, pouring, emptying. Open
with non-sparking tools. Open the lid slowly to release inside pressure.
Empty containers are hazardous. Keep away from direct heat, spark, open flame. It may
contain product residue. Do not re use for any purpose of food, clothing or any products
for human /animal consumption.
Storage: Store in cool, dry and ventilated place under normal ambient conditions. Ensure closures
are tightly closed & incompatible materials are not stored aside.

8. Exposure Controls / Personal Protection
Employee should complete an assessment of all workplaces to determine the need for, and selection of,
proper exposure controls and protective equipment, before each task is performed.
Engineering Controls: Provide general and local exhaust ventilation to effectively remove and prevent
built up of any vapours or mists generated from handling of this product.
Respiratory Protection: If ventilation is not sufficient to effectively prevent built up of aerosols, mists or
vapours, appropriate masks /NIOSH/MSHA protections must be provided.
Eye/Face Protection: Wear safety goggles, face masks.
Skin/body protection: Wear chemical resistant gloves, impervious aprons, shoes are recommended.
9. Physical and Chemical Properties

Property Value
Appearance Colourless to Pale Yellow Liquid
Odour None to negligible
Specific Gravity 1.16 +/- 0.02
Viscosity at 25oC 2,000 +/- 500 cPs
% Non-volatiles by weight 100%
Solubility in water Not soluble
10. Stability and Reactivity Data

Stability: Stable at normal conditions of temperature and pressure.
Hazardous Decomposition: In case of decomposition, emits carbon monoxide, carbon dioxide
Reactivity: None Known
11. Toxicological Information

None Known
General toxicological information: No laboratory animal data available.
12. Ecological Information

Ecological Information: Do not empty in to drains / surface water / ground water.
Ecotoxicity: The product itself and the products on bio degradation are nontoxic.
13. Disposal Considerations

Disposal must be in accordance with Federal / state / local government regulations.
Category: Non-Bio Degradable Hazardous Waste
14. Transport Information

Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR
15. Regulatory Information

21 CFR 175:105 USFDA: Brilliant S110 is in compositional compliance.
EU /10/2011 (amendment (EU) 2020/1245: Plastic regulation
In absence of specific provisions for adhesive and coatings at European level, we continue to use Plastic
regulation and amendments for the food regulatory assessment of our products.
16. Other Information
This information is based on our current level of knowledge and relates to the product in the state in which it is
delivered. It is intended to describe our products from the point of view of safety requirements and is not
intended to guarantee any particular properties.
LIABILITY DISCLAIMER:
The data contained herein are furnished for information only and are believed to be reliable. However, Brilliant
Polymers and its affiliates does not assume any responsibility for any results obtained by persons/users, over
whose methods, Brilliant does not have control. It is users responsibility to determine Brilliant products suitability
or a production method, for particular purpose. It is advisable to adopt precautions given for the protection of
property/personnel involved. Brilliant specifically disclaims all warranties, express or implied, including warranties
of merchantability and fitness for particular purpose, arising from sale or use of Brilliant products. Brilliant further
disclaims any liability for consequential or incidental damages of any kind, including lost profits or fines.
Prepared By: Regulatory Affairs
This datasheet replaces all former versions and recommendations.

Date of Release: Sept 2023


SDS Brilliant S110

Uploaded by

Copyright:

Available Formats

SDS Brilliant S110

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SDS Brilliant S110

Uploaded by

Copyright:

Available Formats

Brilliant S110

Safety Data Sheet

1. Product and Company Identification

HAZARD CLASS HAZARD CATEGORY HAZARD STATEMENT

2.2 Label Elements: (According to GHS)

NO GHS NO GHS NO GHS

Brilliant Polymers Pvt. Ltd.

4. First Aid Measures

5. Fire Fighting Measures

6. Accidental Release Measures

7. Handling and Storage

Brilliant Polymers Pvt. Ltd.

9. Physical and Chemical Properties

10. Stability and Reactivity Data

11. Toxicological Information

12. Ecological Information

13. Disposal Considerations

14. Transport Information

15. Regulatory Information

16. Other Information

Prepared By: Regulatory Affairs

This datasheet replaces all former versions and recommendations.

Brilliant Polymers Pvt. Ltd.

You might also like