Crocodile
Crocodile
Crocodile
paperart
CROCODILE
PAGE 1/19
Instructions for
Printing and Folding
Print on thin Paper and adhere the mask pieces to cardboard. This method
will result in the printed lines and pattern guide numbers being hidden on the
inside of the finished mask.
(1) Print your mask pieces on plain (4) Using a thick sewing needle or
printer paper. blunt knife and a ruler, score along the
folding lines.
(2) Glue the mask pieces to the back
of your cardboard. We recommend (5) Refer to the diagram below and fold
using spray adhesive or a glue stick as along the creases either bringing the
other types of glue may make the two edges towards you (Valley Fold)
paper too wet. for the plain dashed line folds or away
from you (Mountain Fold) for the dot/-
(3) Cut out the pattern pieces along dashed line folds.
the solid cutting lines.
(6) Proceed to Assembly Instructions
Note: the dashed lines are folding section.
lines, make sure not to cut them!
IMPORTANT
PAGE 2/19
Mask Assembly Instructions
Assembly
(8) After completing the mask you can
(7) Each number on the mask pattern optionally assemble our fitting band on
has a twin. Find the matching numbers the final page. Tape it to the inside to
and attach the two pieces together. get an optimal fit for your mask.
Option 1 / Easy
Clear Adhesive Tape
PAGE 3/19
4” (100mm)
3
10
gluE flapS
PAGE 4/19
6
12
7
PAGE 5/19
31
30
18
44
11
12
64
PAGE 6/19
25 23
36
9
10
8
58
PAGE 7/19
46
16
15
27
28 34 21
26
32
13
14
37
19
41
PAGE 8/19
25
glue
24
TogetheR
22
22 13
23
26
33
21
14
47
31
27
15
32
28
34
29
glue
TogetheR
29
16
30
45
PAGE 9/19
53
52
53
45
51
48
46
50
47
49
54
49
PAGE 10/19
39 41 40
17
35
43
42
20
38
PAGE 11/19
48
51
50
2 glue
TogetheR
2
3
1
5
w w w. l a p a s t u d i o s . c o m
PAGE 12/19
8
57
62
4
54
59
PAGE 13/19
60
44
52
6
61
63
11
PAGE 14/19
56
55
56
57
63
58
64
PAGE 15/19
18 33
19
39
17
43
20
PAGE 16/19
36
24
37
40
35
42
38
PAGE 17/19
60
59
61
62
55
PAGE 18/19
The Fitting Band
The fitting band for your mask will be made from strips of
cardboard paper and can be adjusted to get a good fit.
(1) Cut 3 strips of A4/US letter paper. (4) Tape the ends closed to make one
Each strip should measure 1.5" continuous loop of paper.
wide (40mm) and the length will be
the full length of the page. (5) Cut out 2 rectangles from the sheet
of paper, each one should measure
(2) Stick the short ends of the strips 1.5" x 4” (40mm x 100mm).
together with tape to make one
long strip of paper. (6) Tape one rectangle on either side
of the band (see drawing below).
(3) Wrap the long strip around your
head, overlapping the ends; make (7) Place the fitting band inside of the
sure that the resulting band is a mask and tape it to the back of
snug fit. the mask.
CutouT arRange
A4 papeR / us leTter papeR
1.5”/40mM
1.5”/40mM
1.5”/40mM
1.5”/40mM
4”/100mM
PAGE 19/19