Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    Wecon LX3V-2AD2DA BD: WECON Technology Co.,Ltd

    Uploaded by

    fly2long
    2ADI2DAI

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Wecon LX3V-2AD2DA BD: WECON Technology Co.,Ltd

    Uploaded by

    fly2long
    4 views5 pages
    2ADI2DAI

    Original Title

    20171128105511

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    2ADI2DAI

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views5 pages

    Wecon LX3V-2AD2DA BD: WECON Technology Co.,Ltd

    Uploaded by

    fly2long
    2ADI2DAI

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    WECON

    LX3V-2AD2DA
    BD

    WECON Technology Co.,Ltd.


    Website: http://www.we-con.com.cn/en
    Technical Support: liux@we-con.com.cn
    Skype: fcwkkj
    Phone: 86-591-87868869
    1 WECON Technology Co., Ltd.
    LX3V-2AD2DA-BD
    1. Mounting instruction
    Make sure to power off the PLC before mounting the 2AD2DA module.or removing the top cover of PLC, fix
    the BD board to the PLC.
    Caution: when output current, make sure that the load resistance should be less than 500Ω, otherwise the
    output will be lower.
    Warring: make sure to power off the PLC before mounting or removing the BD module.and put the cover in
    right place.

    2. Special feature
    1). LX3V-2AD2DA-BD module equips with 2 channels analog input and 2 channels analog output. This
    module will be mounted in the PLC.
    2). The input current of LX3V-2AD2DA-BD module between 4 to 20mA, and the digital value will be saved
    in special system address, but the numerical relationship between input and output value can not be changed.

    Table 1.1 The description of system address


    Address Description

    D8112 The digital value of channel 1

    D8113 The digital value of channel 2

    D8114 The digital value of channel 3

    D8115 The digital value of channel 4

    3. Dimension

    IN-2AD Output current range: 4~20mA IN-2DA Output current range: 4~20mA

    L1+ Anode of the channel 1 current input I1+ Anode of the channel 1 current output

    L1- Cathode of the channel 1 current input I1- Cathode of the channel 1 current output

    VI- No connection • No connection


    2 WECON Technology Co., Ltd.
    L2+ Anode of the channel 2 current input I2+ Cathode of the channel 2 current input

    L2- Cathode of the channel 2 current input I2- Cathode of the channel 2 current output

    Only one LX3V-2AD2DA-BD module in LX3V PLC can be recognized.

    4. Specification
    1). You may refer to the LX3V User manual for the general specification of LX3V-2AD2DA-BD.
    2). Power supply from LX3V.

    item Specification

    Current input Current output

    Input range DC4~20mA (Input resistance:150Ω) DC4~20mA (Load resistance should be

    Max input：-2mA~60mA less than 500Ω)

    Digital output 12 bits binary 12 bits binary

    Resolution 8uA 12 bits binary

    Precision ±1% ±1%

    AD conversion time One PLC scanning cycle One PLC scanning cycle

    Characteristic

    Insulation No insulation in each PLC channel

    Occupied points Zero point Zero point

    5. Wiring
    Caution:
    1). Don’t put the LX3V-2AD2DA-BD module near high-voltage power cable. Keep away the power cable at
    least 100mm.
    2). Do not soldering any terminal with the others device.
    3 WECON Technology Co., Ltd.
    3). Do not connect any unsuitable cable.
    4). Please fix cable.
    5). Do not connect any unit to the unused terminal.

    5.1 Suitable cable


    Connect to output device with AWG25-16.
    Max tighten torque of terminal is 0.5 to 0.6N.m.

    Line type Cross sectional area(mm2) End-of-pipe treatment

    AWG26 0.1288 Stranded cable: stripped jacket,


    rub Conductor, then connect the
    ...... ...... cable.
    AWG16 1.309 Single-core cable: stripped
    jacket, Then connect the cable.

    5.2 Output and Input

    6. Example
    The analog value(4~20mA) in each channel will be saved in system address(D8112, D8113). It will be saved
    automatically when “END”, and convert into digital value. On the contrary process when output.
    6.1
    caution:1. trigger M8122 and M8113, and set the characteristic of conversion.
    2. Do not change the states of ON of OFF during conversion process.
    3. The AD conversion will fail if you change the state of M8112 of M8113.
    The DA conversion will fail if you change the state of M8114 of M8115.
    4. Do not change the value of D8112 and D8113.
    AD conversion:

    Set channel 1 as current input(4~20mA)


    Set channel 2 as current input(4~20mA)
    Save the value of channel 1 to D0
    Save the value of channel 2 to D2
    DA conversion:
    4 WECON Technology Co., Ltd.
    Set channel 1 as current output(4~20mA)
    Set channel 2 as current output(4~20mA)
    Save the value of D0 to channel 1
    Save the value of D2 to channel 2

    5 WECON Technology Co., Ltd.

    You might also like