4A0 100 v2
4A0 100 v2
4A0 100 v2
Total Questions:
228
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 1
You are configuring your Alcatel-Lucent 7750SR Service Router from the Command Line Interface (CLI), and after entering a lengthy command, wish to return directly to the ROOT context. Which control command allows you to do this quickly? A. Ctrl-z B. Ctrl-c C. Esc D. Shift-Page Down
Answer: A Question: 2
Which of the following best describes a repeater? A. A passive device simply used to connect two or more cables. Does not generate or amplify any signals. B. A device that receives and retransmits a signal out its ports, but does not do any Layer 2 analysis of the data. C. A device that receives a signal and based on the Layer 2 destination address, makes a decision on which ports the signal should be retransmitted. D. A device that receives a signal and based on the Layer 2 destination address, makes a decision on which ports the signal should be retransmitted. E. A device that receives a signal and based on the Layer 3 destination address, makes a decision on which ports the signal should be retransmitted.
Answer: B Question: 3
How do protocols such as ATM and Frame-Relay support differentiating multiple customers or traffic types on the same physical wire? A. ATM and Frame-Relay are circuit switched protocols and use Virtual Circuits to create logical separation of traffic. B. ATM and Frame-Relay are point-to-point protocols and do not support different customers or traffic type on the same physical wire. C. ATM and Frame-Relay are circuit switched protocols and use VLAN's to create logical separation of traffic. D. ATM and Frame-Relay are circuit switched protocols and use IP Header information to create logical separation of traffic.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 4
Which of the following is a feature of Layer 3? A. Provides an universal addressing scheme B. Ensures data is delivered across the Layer 2 network. C. Provides reliable data transfers. D. Provides a physical interface to the network.
Answer: A Question: 5
The 201148260/24 network is subnetted using a /26 mask. How many subnets and host addresses will you obtain with this mask? A. 4 subnets, 64 hosts B. 64 subnets, 4 hosts C. 4 subnets, 62 hosts D. 64 subnets, 2 hosts E. 6 subnets, 30 hosts
Answer: C Question: 6
What kind of information can a Dynamic Host Configuration Protocol (DHCP) client receive? A. Details of the configuration settings of each router on the network. B. A list of other DHCP clients. C. IP addresses and their lease times. D. Server time information
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 7
Choose two true statements that characterize Link State Routing A. Routers send a copy of their routing table to their neighbors periodically. B. Routers flood link information throughout the entire area. C. Network converges quickly (within several seconds) after a topology change. D. Routers do not have precise knowledge of the entire network topology.
Answer: C, D Question: 8
Which statement accurately explains the purpose of the TCP protocol and what it provides? A. The primary purpose of TCP is to provide reliable communications between application services. B. The primary purpose of TCP is to provide unreliable communications between application services C. The primary purpose of TCP is to provide IP routing between application services. D. The primary purpose of TCP is to define the correct format for the application layer such as JPEG or HTML.
Answer: A Question: 9
Which of the following is the best description of well known ports? A. Well known ports apply to routers only and are used for communication and control traffic. Well known port numbers are assigned by IANA and can have any value. B. Well known ports are used by TCP and UDP. Well known port numbers range from 1024 to 65535 and are assigned by IANA. C. Well known port numbers are used by both TCP and UDP. Well known port numbers range from 1 to 1023 and are assigned by IANA. D. Well known ports numbers are used by TCP only. Well known port numbers are assigned by IANA and can have any value.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 10
Which organization first considered cross-platform networking support to be a necessity? A. IBM. B. US Military. C. Alcatel-Lucent. D. NASA. E. Bell Labs
Answer: B Question: 11
Which of the following statements best describes ARPANET? A. ARPANET was an early packet switched network initially connecting 4 sites (Stanford, UC Santa Barbara, UCLA, and U of Utah). B. The mission of ARPANET was to connect packet switched networks and other diverse networks, making an international network of networks. C. ARPANET connected sites spread around the Hawaiian Islands to a central time-sharing computer on the University of Hawaii campus. D. ARPANET was based on the use of TCP/IP to interconnect diverse systems.
Answer: A Question: 12
Kahn solved the problem of interconnecting different networks using different protocols by pioneering a new protocol called TCP that was capable of: A. Secure transmission of information. B. Enforcing a constant packet size to avoid discards. C. Allowing remote logins. D. Providing host to host connectivity with global addressing.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 13
Which network was created to replace ARPANET? A. INWG B. ALOHANET C. IETF D. NSFNET
Answer: D Question: 14
Which statement best describes how the internet evolved? A. The internet emerged in the commercial world in the 1980s following the US militarys adoption of TCP/IP in 1983 B. The internet evolved from a military to a research to a commercial based network. C. The internet remained primarily a research based network and was only commercially adopted in 2000 when the world wide web was conceived. D. Internet service providers provided the services necessary for military based networks to evolve into research and education based networks.
Answer: B Question: 15
Which organization eventually became the standards body for IP and related protocols? A. IEEE B. IETF C. NSFNET D. ITU-T E. APNIC
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 16
What is the name for an organization that provides Internet services to its customers A. A large corporation. B. An ISP. C. A home based business. D. A content provider.
Answer: B Question: 17
The IANA is responsible for: A. Intra-city ISP traffic. B. Allocation of the global IP address space. C. Allocating IP addresses for residential customer traffic. D. Allocating North American IP addresses .
Answer: B Question: 18
Which of the following is an important advantage of protocol layering? (Choose two) A. Controls distribution of IP addresses. B. Simplifies protocol functionality. C. Isolates changes in lower layers from upper layers. D. Increases protocol operational efficiencies. E. Layering adds to the fragmentation of the data
Answer: C, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 19
To transmit its segments of data across the network TCP uses the services of which layer A. Application Layer. B. Transport Layer. C. IP Layer. D. Data Link Layer
Answer: C Question: 20
Which of the following are protocols belonging to the OSI suite of protocols? (Choose two) A. OSPF B. BGP C. X.500 D. IS-IS E. Ethernet
Answer: D, E Question: 21
Which of the following statements is TRUE regarding the development of the OSI Reference Model? A. OSI was developed as an alternative, open standard to IBMs SNA model. B. OSI protocols were no longer used after TCP/IP was developed. C. OSI model is much simpler than TCP/IP. D. OSI model is maintained exclusively by the IETF.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 22
The TCP/IP and OSI models of protocol are similar in that they both have : A. An application and session layer. B. A network layer that provides a universal and consistent forwarding service. C. A transport layer with two protocols. D. An applications services layer with similar layering and service definitions.
Answer: B Question: 23
How many of the front access card slots of the Alcatel-Lucent 7750 SR-12 router are dedicated for redundant common equipment? A. 1 B. 2 C. 7 D. 10
Answer: B Question: 24
Which of the following is not supported on the Alcatel-Lucent 7450 ESS? A. Support for IPv6 B. Support for POS. C. Upgrade path to the Alcatel-Lucent 7750 SR. D. Support for IS-IS
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
Question: 25
The TiMOS-m.n.Y.Z software image file is software that: A. Contains all the components required to configure and run protocols on the Alcatel-Lucent 7750 SR/7450 ESS. B. Loads the router configuration. C. Transfers the router configuration from the router to the network management system. D. Loads the router software image.
Answer: A Question: 26
When entering a command on the Alcatel-Lucent 7750 SR from the Command Line Interface (CLI), what would you use to list all the options for the command? A. ? B. tab character C. space character D. info
Answer: A Question: 27
Which of the following describes the Alcatel-Lucent 7750 SR Input/Output Module (IOM)? A. Small optical module available in a variety of formats. B. Contains a CPU for managing the forwarding hardware in each flexible fast path. C. Converts traffic from an external standard format to an internal format. D. Contains the CPU that runs the routing protocol software as well as the switch fabric.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
10
Question: 28
A typical Alcatel-Lucent 7750 SR Media Dependent Adapter (MDA) interfaces with: A. A Small Form-Factor Pluggable (SFP) module. B. The Central Processing Unit (CPU). C. The Control Plane. D. The Switch Fabric.
Answer: A Question: 29
Which of the following best describes the operation of the Media Dependent Adapter (MDA)? A. The MDA contains the flexible fast path complex used for forwarding data. B. Excess data is discarded by the MDA and the remaining data forwarded for QoS processing. C. The MDA buffers data and applies Quality of Service (QoS) to classify and treat the data appropriately. D. The MDA converts data from its incoming physical format into an internal format and provides some minimal buffering.
Answer: D Question: 30
What is NOT a function of the IOM? A. It forwards the data to the switch fabric. B. It discards excess data packets. C. It converts the incoming data to an internal format. D. It performs Quality of Service operations and buffers incoming data.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
11
Question: 31
Which compact flash on a Control/Switch processor of an Alcatel-Lucent 7750 router stores the runtime image and running configuration? A. CF 1 B. CF 2 C. CF 3 D. Both A and B
Answer: C Question: 32
One of the tasks of the boot options file (BOF) is to: A. Specify authorization information to control access to the router. B. Define an IP address for the CPM Ethernet port. C. Initialize the hardware. D. Set the date/time for the system.
Answer: B Question: 33
Which of the following user interface sessions are accessible through Telnet and Secure Shell (SSH) on the Alcatel-Lucent 7750 SR and 7450 ESS? A. Graphic User Interface (GUI). B. Node Management Terminal Interface (NMTI). C. Command Line Interface (CLI). D. All of the above.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
12
Question: 34
You are working from a particular Command Line Interface (CLI) context, and want to see the commands available from your current context. What command can you issue to view this information? A. view tree B. tree C. info detail D. info
Answer: B Question: 35
What is available for auto completion of commands within the CLI on the Alcatel-Lucent 7750 SR Service Router? A. Type the first letters of the command, then press Ctrl C B. Type the first letters of the command, then press Esc C. Type the first letters of the command, then press Tab D. Type the first letters of the command, then type ?
Answer: C Question: 36
Which of the following is a File command in the File System context of the Command Line Interface (CLI)? A. time-display B. help C. type D. terminal
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
13
Question: 37
What must occur for a LAG to become operational? A. There must be multiple ports assigned to the LAG. B. All ports in the LAG must be configured with the same characteristics. C. Auto-negotiation must be enabled on all ports in the LAG. D. All of the above.
Answer: B Question: 38
If a 4-port LAG is configured with the option of 'port-threshold 2' and 'action down' what will happen if the total operational links in the LAG is 2? A. If dynamic-cost is enabled it will adjust the cost for routing protocols such as OSPF. B. If dynamic-cost is not enabled it will adjust the cost for routing protocols such as OSPF by dividing the link bandwidth by 2 C. The LAG will be changed to an operational state of 'down'. D. The LAG will function with only 2 ports. There will be no change to the routing metric.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
14
Question: 39
Click the Exhibit Button below An Ethernet Local Area Network (LAN) consists of the components shown in the diagram below: How many broadcast and collision domains are on this LAN?
A. 9 broadcast domains, 3 collision domains. B. 3 broadcast domains, 3 collision domains. C. 3 broadcast domains, 9 collision domains. D. 1 broadcast domain, 9 collision domains.
Answer: C Question: 40
As described by the CSMA/CD algorithm, what is the first thing to happen when Host A and Host B begin transmitting data at the same time? A. Host A and B will generate a jam signal. B. Listening hosts will request retransmission. C. Host A or B will retry the transmission. D. A back-off timer is started by Host A or B.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
15
Question: 41
(Click the Exhibit Button below) An Ethernet Local Area Network (LAN) consists of the following components: Four 24-port hubs & Two 16-port switches How many broadcast domains are on this LAN?
A. 1 B. 2 C. 5 D. 32
Answer: A Question: 42
Which of the following best describes an Ethernet bridge? A. A passive device simply used to connect two or more cables. Does not generate or amplify any signals. B. A device that receives and retransmits a signal out its other ports, but does not do any Layer 2 analysis of the data. C. A device that receives a signal and based on the Layer 2 destination address, makes a decision on which ports the signal should be retransmitted.
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
16
D. A device that receives a signal and based on the Layer 3 destination address, makes a decision on which ports the signal should be retransmitted.
Answer: C Question: 43
What happens immediately after an Ethernet switch receives an Ethernet frame? A. It records the destination MAC address and the interface on which it arrived. B. It records the source MAC address and the interface on which it arrived. C. It floods the frame out of all its interfaces except the interface on which the frame arrived. D. It transmits the frame out of the appropriate interface.
Answer: B Question: 44
What is the behaviour of a typical Ethernet switch when it receives a frame with a unicast destination MAC address? (Choose two) A. The switch floods the frame out of all ports except the port on which it was received. B. The switch looks in its FDB. If the source address is unknown it discards the frame. C. The switch looks in its FDB. If the destination address is known it forwards the frame out the appropriate interface. D. The switch looks in its FDB. If the destination address is unknown it floods the frame out all ports except the port on which it was received. E. The switch looks in its FDB. If the destination address is unknown it discards the frame.
Answer: C, D Question: 45
Which technologies can be used with Ethernet switches to achieve redundancy? (Choose two) A. LAG B. OSPF C. RIP D. STP
Answer: B, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
17
Question: 46
In what type of network is a broadcast storm likely to occur? A. An Ethernet network with redundant paths not running STP. B. An ATM network. C. A SONET network. D. All of the above.
Answer: A Question: 47
What problems was Spanning Tree Protocol (STP) primarily designed to solve? (Choose two): A. Providing path redundancy. B. Preventing loops. C. Handling collisions. D. Allowing flooding of multicast traffic.
Answer: B, C Question: 48
Which of the following is a feature of a VLAN? A. A VLAN allows multiple Ethernet switches to be connected in a single broadcast domain. B. A VLAN allows multiple Ethernet switches to be connected in a single collision domain. C. A VLAN can separate ports on the same switch into different broadcast domains. D. A VLAN can separate ports on the same switch into different collision domains.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
18
Question: 49
What is required if devices on different VLANs wish to communicate with each other? A. Devices on different VLANs cannot communicate with each other. B. Devices on different VLANs can communicate with each other as long as they are connected to the same switch. C. Devices on different VLANs can communicate with each other as long as the switches they are attached to are connected to each other with an Ethernet connection. D. Devices on different VLANs can communicate with each other if there is an IP router to connect the VLANs.
Answer: D Question: 50
A 24 port Ethernet switch is configured with VLAN 100 on ports 1 - 8, VLAN 200 on ports 9 - 16 and VLAN 300 on ports 17 24. Which of the following describes the behavior of the switch when a broadcast frame is received on port 1? A. The switch will discard the broadcast frame because there is no specific destination address. B. The switch will flood the broadcast frame on all ports on which the switch has seen frames from attached devices C. The switch will flood the broadcast frame on ports 2 to 8 D. The switch will flood the broadcast frame on all 24 ports.
Answer: C Question: 51
The method by which Ethernet frames are associated to a specific VLAN is referred to as: A. Segmenting. B. Stacking. C. Routing. D. Tagging.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
19
Question: 52
What information is used to separate VLANs on a VLAN trunk that connects multiple VLANs? A. VLAN tag. B. IP Header. C. FCS. D. Priority Value.
Answer: A Question: 53
Using Q-in-Q Virtual Local Area Network (VLAN) stacking, how does a carrier differentiate one customers traffic from that of another? A. The provider edge (PE) switch adds an additional field called a PE tag to the customers Layer 2 data. B. The PE switch replaces the customers VLAN tag with a carrier-assigned tag. C. The PE switch adds a second VLAN tag to identify the customers traffic on the carriers network. D. The PE switch assigns a customer-specific priority label to the customers traffic.
Answer: C Question: 54
What is the purpose of the Data Link Layer in the OSI model? A. The Data Link Layer is responsible for encapsulating the packet into a frame for transmission on the transmission media. B. The Data Link Layer is responsible for encapsulating the packet into an IP header and routing the packet. C. The Data Link Layer is responsible for formatting the packet for applications such as JPEG format. D. The Data Link Layer is responsible for timing of the signals on the transmission media
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
20
Question: 55
Which of the following is typically a characteristic of Layer 2 framing? A. Provides a universal addressing scheme to uniquely identify destinations in the network. B. The size of the Layer 2 frame cannot exceed 1518 bytes. C. Provides error checking of the frame contents after transmission. D. All the above.
Answer: C Question: 56
Which of the following is NOT an example of a Layer 2 protocol? A. POS B. IP C. ATM D. Frame Relay E. Ethernet
Answer: B Question: 57
Why is the address field in a PPP header always set to "11111111"? A. PPP supports multipoint access networks with many stations. The all 1's acts as a broadcast. B. PPP supports multipoint access networks with many stations. The all 1's acts as a multicast. C. PPP supports point-to-point networks only. The address field is fixed. D. PPP supports point-to-point networks only. The address field can change dynamically since every station is assigned a PPP address.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
21
Question: 58
Which ATM adaptation layer is commonly used for transporting IP datagrams or non-real time data? A. AAL0 B. AAL1 C. AAL2 D. AAL3/4 E. AAL5
Answer: E Question: 59
Which of the following is a characteristic of ATM? A. Application data is transported in 53-byte cells. B. ATM circuits are identified by a VPI/VCI value. C. Provides enhanced QoS support with 5 classes of service. D. Ideal for multiple services on the same physical line. E. All of the above. F. None of the above
Answer: E Question: 60
What is the basic unit of framing in SONET and the bit rate for its transmission? A. STS-1 with a bit rate of 1544 Mbit/s B. STS-1 with a bit rate of 2048 Mbit/s C. STS-1 with a bit rate of 5184 Mbit/s D. STS-1 with a bit rate of 15552 Mbit/s
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
22
Question: 61
What is the basic unit of framing in SDH and the bit rate for its transmission? A. STM-1 with a bit rate of 1544 Mbit/s B. STM-1 with a bit rate of 2048 Mbit/s C. STM-1 with a bit rate of 5184 Mbit/s D. STM-1 with a bit rate of 15552 Mbit/s
Answer: D Question: 62
Which of the following are examples of Time Division Multiplexing (Choose two)? A. Ethernet. B. Token-Ring. C. SONET/SDH. D. E1 carrier. E. PPP
Answer: D, E Question: 63
How many DS-3 frames can be transported in an OC-3 frame? A. 1 B. 2 C. 3 D. 4
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
23
Question: 64
Who was responsible for developing and publishing the original standard that was used for 10 Mbit/s Ethernet? A. Intel Corporation. B. Digital Equipment Corporation. C. DEC-Intel-Xerox. D. Apple Computer. E. IBM.
Answer: C Question: 65
Which Ethernet frame field does the receiver use to verify the integrity of the received bits? A. Destination address. B. Frame check sequence. C. Preamble. D. Length field.
Answer: B Question: 66
How is Ethernet II different from Ethernet 8023? A. Ethernet 8023 can only be used on point-to-point links, while Ethernet II can be used on broadcast networks. B. In Ethernet II the 2 bytes after the source MAC address is used as a type indicator. In Ethernet 8023 these two bytes indicate the length of the frame. C. In Ethernet 8023, the 2 bytes after the source MAC address is used as a type indicator. In Ethernet II these two bytes indicate the length of the frame. D. Ethernet II and Ethernet 8023 are two different names for the same protocol
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
24
Question: 67
Given the Mac Address 00-20-60-ce-2b:28, which part is the Organizationally Unique Identifier (OUI)? A. 2b:28 B. 00-20 C. ce-2b:28 D. 00-20-60
Answer: D Question: 68
Which of the following type of addressing scheme delivers information from one source to all devices who are members of a specific group? A. Anycast. B. Multicast. C. Broadcast. D. Unicast.
Answer: B Question: 69
Which of the following is true of Ethernet half-duplex transmission? A. Half-duplex transmission is less efficient because the frame MTU is smaller. B. Half-duplex transmission is only 30-40% efficient because of collisions. C. Ethernet switches support half-duplex transmission only. D. All of the above.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
25
Question: 70
What is the meaning of carrier sense in the CSMA/CD algorithm? A. The host will retransmit the frame if it detects a collision during transmission. B. The host is able to detect the transmission speed of the Ethernet switch port to which the host is connected. C. The host will only transmit data when it detects that no other devices are transmitting. D. The host will only transmit upon a timer expiry. E. The host will only transmit when it receives the token.
Answer: C Question: 71
What is the effective maximum rate of data transmission on a 10 Mbps full-duplex Ethernet link? A. 5 Mbps. B. 10 Mbps. C. 15 Mbps. D. 20 Mbps.
Answer: D Question: 72
Which of the following Ethernet rates requires an optical cable to operate? A. 10 Mb/s Ethernet. B. 100 Mb/s Ethernet. C. 1000 Mb/s Ethernet . D. There are copper and optical versions possible for all of these Ethernet data rates.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
26
Question: 73
What distance is supported using CAT-5 cabling for 10/100/1000 TX? A. 100 m. B. 500 m. C. 1 Km. D. 10 Km.
Answer: A Question: 74
Which of the following statements is TRUE of Layer 3 addressing? A. Internet devices on the same network can have the same Layer 3 address in different broadcast domains. B. Every Host device must have a unique Layer 3 address in order to access the Internet. C. Internet devices need unique Layer 3 addresses to communicate directly with upper layers. D. A router must have only one address to allow it to be uniquely identified.
Answer: B Question: 75
Which of the following is a characteristic of the IP layer? A. Provides an unreliable, connectionless data transmission service. B. Provides a mechanism for flow control. C. Verifies the integrity of all received datagrams. D. Provides services equivalent to the OSI data link layer.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
27
Question: 76
The physical networks connecting two PCs to the internet are DSL and PPP respectively. Which layer will enable the two PCs to communicate? A. Layer 1 B. Layer 2 C. Layer 3 D. Layer 4
Answer: C Question: 77
Hosts in the same IP network share which common address feature? A. Same host numbers. B. Same IP address. C. First two bits of the IP address are set to 01 D. Same network prefix.
Answer: D Question: 78
A Class C network is defined by a: A. 32-bit network prefix. B. 24-bit network prefix. C. 16-bit network. D. 8-bit network.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
28
Question: 79
Public IP address spaces are distributed by which of the following organizations? A. Network Solutions INC. B. IANA. C. IETF. D. ITU-T. E. IEEE.
Answer: B Question: 80
What characteristic of IP addressing creates a hierarchical network? A. All hosts on all networks must have unique host numbers. B. IP addresses identify a host and the network on which it resides. C. Clients are assigned 32-bit addresses and servers 64-bit addresses. D. Router, switch and host addresses are drawn from unique address classes.
Answer: B Question: 81
Which of the following is a private IP network address reserved by the IANA? A. 1723000/16 B. 19210000/24 C. 172000/16 D. 16925400/16 E. 11000/8
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
29
Question: 82
Which type of IP address contains the network number and all 1's for the host address? A. Unicast address. B. Broadcast address. C. Multicast address. D. Anycast address.
Answer: B Question: 83
Complete the following sentence: The introduction of the subnet address added another A. Layer of hierarchy in the addressing structure. B. Class to the classful addressing system. C. 16-bit number to accompany the IP address. D. 4,294,967,296 addresses to the IP address space.
Answer: A Question: 84
What bit pattern identifies the network address in the subnet mask? A. A string of 1s B. A string of 0s C. A string of alternating 10s D. There is no specific bit pattern to identify the network address.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
30
Question: 85
What is the purpose of the broadcast address? A. Provides an address that refers to all the devices in a given network. B. Provides an address to refer to a specific group of devices in a given network. C. Provides an address to refer to a group of devices having the same IP addresses in different Layer 2 networks. D. Provides an address to refer to a single device on a given network.
Answer: A Question: 86
Which three of the following are important considerations when designing subnets? (Choose three.) A. Number of subnetworks currently required. B. Type of physical connectivity used by each segment. C. Future network growth requirements. D. Number of hosts each subnetwork will support. E. Class of the network address to be used for the network.
Answer: A, C, D Question: 87
Network address: 20012300 Network mask: 2552552550 Use the information above. You need to create 12 subnetworks supporting 10 host addresses each. Which extended prefix will meet this requirement? A. /12 B. /24 C. /26 D. /28 E. /30
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
31
Question: 88
Given the associated prefix value, which of the following is a valid host address? A. 17216224255/18 B. 255255255255/32 C. 224121/8 D. 1921682459/30
Answer: A Question: 89
A network administrator is creating a subnet plan for the address 1721600/16 . The network must support 459 hosts on each subnet while providing the maximum number of subnets. What subnet mask should be used? A. 25525500 B. 2552551280 C. 2552552240 D. 2552552540
Answer: D Question: 90
With a subnet mask of 255255255224, which of the IP addresses below are valid host addresses? (Choose all that apply) A. 172311963 B. 879912159 C. 95112293 D. 192112587
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
32
Question: 91
Given a network address of 1161400, which of the following is a valid host address when using the subnet mask 255255255240? A. 116141716 B. 116141731 C. 1161417192 D. 1161417189
Answer: D Question: 92
Given the following (Network address: 208402240, Network prefix: /28) What is the address range, including the network and broadcast addresses, for the fourth sub-network? A. 208402240 20840224255 B. 2084040 208404255 C. 2084022416 2084022431 D. 2084022448 2084022463 E. 208402270 - 20840224255
Answer: D Question: 93
Which of the following is a characteristic of a subnet created with a /31 prefix? A. There is no broadcast address on the network. B. The address can only be used as a loopback address. C. This specifies a single host address. D. A /31 prefix is not supported on the SR and ESS platform.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
33
Question: 94
Which of the following is a characteristic of the system address? A. A physical interface address. B. A logical address on the router not corresponding to any specific interface. C. May have any prefix value. D. A management IP address.
Answer: B Question: 95
Address summarization reduces the routing table size by: A. Allowing a contiguous block of network addresses to be represented by one network prefix. B. Increasing the number of addresses in the routing table. C. Summarizing addresses in the network into smaller routing tables. D. Not advertising directly connected routes.
Answer: A Question: 96
What is the preference value in the routing table used for? A. It indicates the preferred egress interface. B. It differentiates between multiple routes to a destination learned by the same protocol. C. It differentiates between multiple routes to a destination learned by different routing protocols. D. It is used to differentiate local routes from remote routes.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
34
Question: 97
At what stage in the packet forwarding process is the IP packet header examined? A. When the router first receives a frame from a LAN. B. After the forwarding table is checked. C. After the IP datagram is extracted from the L2 frame. D. Immediately before the IP packet is encapsulated for transmission.
Answer: C Question: 98
What happens next after an incoming packet is de-encapsulated from the Layer 2 frame in an Alcatel-Lucent 7750 router? A. The IP datagram is encapsulated in the appropriate Layer 2 frame by the MDA. B. The IP datagram passes through the switch fabric to reach the egress IOM. C. The IP datagram is passed to the IOM. D. A lookup is performed in the FIB to determine the egress interface.
Answer: C Question: 99
Which of the following IP header fields contains information that indicates whether routers are allowed to fragment a packet? A. Header checksum. B. Fragmentation offset. C. Flags. D. Identification.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
35
Question: 100
What is the main purpose of IP fragmentation? A. To limit the number of the IP addresses in the network. B. To improve the efficiency of transmissions over the network. C. To reduce the number of resources required to send a large frame over the network. D. To allow IP datagrams to be carried over Layer 2 networks with varying MTU sizes.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
36
Question: 103
Which of the following command lines would be found in a list of commands designed to permit only certain type of traffic from exiting router RTR-A to router RTR-B? A. RTR-A>config>router>if>ingress# filter ip 1 B. RTR-B>config>router>if>ingress# filter ip 1 C. RTR-B>config>router>if>ingress# filter ip 1 D. RTR-A>config>router>if>egress# filter ip 1
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
37
Question: 106
What is the sequence of events for a client to receive an IP address from the server in the DHCP? A. Discover, offer, request, acknowledgement. B. Request, offer, discover, acknowledgement. C. Discover, request, offer, acknowledgement. D. Request, acknowledgement, discover, offer.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
38
Question: 109
When a device in an IP network receives an echo request message that is destined for itself, it then: A. Estimates the round trip-time. B. Generates an echo reply. C. Calculates the data loss statistics. D. Verifies the data field of the message.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
39
Question: 112
Which field in the IP routing table contains the name or address of the neighbour that advertised the prefix to the router? A. Preference. B. Metric. C. Dest prefix. D. Next hop.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
40
Question: 115
Which of the following describes a static default route? A. An entry included in the default configuration of the router that is used if no dynamic routing protocols or static routes are configured. B. A wildcard entry used when the destination network is not specifically defined in the routing table. C. An entry selected based on the route that has the least cost to the destination (path with the most physical bandwidth) D. An entry used by the routing protocol when it is unable to calculate the best route to the destination.
A. config router static-route 19216820/24 next-hop 10232 B. config router static-route 10231 next-hop 19216820 C. config router static-route 19216820/24 next-hop 10231 D. config router static-route 10232 next-hop 19216820
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
41
Question: 117
Based on the network diagram, (click on exhibit) what is the command to use on CR1 to setup a default static route to R1?
A. config router static-route 0000/0 next-hop 10232 B. config router static-route 0000 next-hop 10232 C. config router static-route 10232 next-hop 0000/0 D. config router default-route 10232 E. config router static-route 0000 next-hop 19216820
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
42
B. config router static-route 19216820/24 next-hop 10111 C. config router static-route 19216820/24 next-hop 10231 D. config router static-route 19216820/24 next-hop 10112 E. none of the above
A. 1721690/24 next-hop 1010101 B. 1721690/24 next-hop 1010102 C. 172169024 next-hop 1010103 D. Any of the above
Answer: B, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
43
Question: 121
Choose two true statements that characterize Distance Vector Routing? A. Routers send a copy of their routing table to their neighbors periodically. B. Routers flood link information throughout the entire area. C. Network converges quickly (within several seconds) after a topology change. D. Routers do not have precise knowledge of the entire network topology.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
44
Question: 124
Which of the parameters in Hello messages exchanged between two OSPF neighbors must be the same to keep the adjacency alive in OSPF? (Choose four.) A. Interface MTU. B. Area ID. C. Authentication password. D. Hello interval. E. Dead interval. F. Router priority.
Answer: D, E
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
45
Question: 127
Which of the following describes the normal sequence of events in the forming of an OSPF adjacency? A. Hello exchange, DB descriptor exchange, Link state requests and updates. B. DB descriptor exchange, Link state requests and updates, Hello exchange. C. Link state requests and updates, Hello exchange, DB descriptor exchange. D. Hello exchange, Link state requests and updates, DB descriptor exchange.
A. R7 silently discards the LSA received from R8 B. R7 installs the LSA received from R8 in its link state database and floods a copy to its neighbors . C. R7 discards the LSA received from R8 and sends an ACK to R8 D. R7 installs the LSA received from R8 in its link state database, sends an ACK to R8 and floods a copy to its neighbors .
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
46
Question: 129
In the diagram, R3 receives an LSA with the sequence number 111 from R7 and then receives another copy of the LSA with a sequence number 112 from R1 What does R3 do with the LSA from R1?
A. R3 discards the LSA received from R1 and sends a copy of the LSA from its link state base to R1 B. R3 installs the LSA received from R1 in its link state database and floods a copy to its neighbors. C. R3 discards the LSA received from R1 and sends an ACK to R1 D. R3 installs the LSA received from R1 in its link state database, sends an ACK to R1 and floods a copy to its neighbors.
A. R3 discards the LSA received from R1 and sends a copy of the LSA from its link state base to R1 B. R3 installs the LSA received from R1 in its link state database and floods a copy to its neighbors. C. R3 discards the LSA received from R1 and sends an ACK to R1 D. R3 installs the LSA received from R1 in its link state database, sends an ACK to R1 and floods a copy to its neighbors.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
47
Question: 131
Which of the following best describes an autonomous system? A. An autonomous system is a network or group of networks operating under one administrative authority. B. An autonomous system is another term for the collection of routers that make up the Internet C. An autonomous system is a network or group of networks from many organizations running different IGP routing protocols, but all running BGP. D. An autonomous system is a loosely defined term that can refer to any organization that has a connection to the Internet.
Answer: A, B, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
48
Question: 134
Which is the public AS in the diagram?
A. IGP B. IBGP C. EBGP D. EGP E. BGP can not be run between routers in the same AS.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
49
Question: 136
In the diagram, what type of BGP session is established between the routers of AS 65001 and AS 2002?
A. IGP B. IBGP C. EBGP D. EGP E. BGP can not be run between routers in different ASs.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
50
Question: 139
What must occur before two hosts can exchange data using TCP? A. Nothing. The two hosts can send data to each other at any time. B. The two hosts must negotiate a path MTU to be used for the data exchange. C. The two hosts must perform a 3-way handshake before transmitting data. D. The two hosts must exchange encryption keys before transmitting data.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
51
Question: 142
What is the purpose of the source and destination ports in the TCP header? A. These ports identify the physical location of the sender and the receiver on the IP router. B. These ports are used as addresses to communicate with the IP layer. C. TCP does not use source or destination ports. D. These ports are used as an address to identify the upper layer application using the TCP connection.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
52
Question: 145
The sequence numbers are used by TCP to ensure that the data receive is provided to the application in the correct order. A. TRUE B. FALSE
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
53
Question: 148
Which field in the TCP header is used by the receiver to indicate how many segments it can receive? A. Checksum B. SYN C. Destination port. D. Window size. E. MTU
Answer: B, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
54
Question: 151
Why does UDP have less overhead then TCP? A. UDP has less overhead because it is only used for transmission of small amounts of data. B. UDP has less overhead then TCP because there is no checksum field in UDP. C. UDP overhead is the same as TCP because it uses the same fields in the header. D. UDP has less overhead because there is no requirement for acknowledgment or retransmission.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
55
Question: 154
What capability of TCP/IP allows two hosts to have multiple TCP sessions to each other simultaneously? A. The combination of IP source and destination address and TCP source and destination port uniquely identifies each session. B. The combination of IP source and destination address and the IP protocol field uniquely identifies each session. C. The hosts can identify the sessions using each others MAC addresses. D. Two hosts can not have multiple TCP sessions simultaneously.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
56
Question: 157
In an MPLS network, which device is responsible for taking an unlabeled packet and encapsulating it with an MPLS label? A. Ingress Label Edge Router. B. Egress Label Edge Router. C. Label Switching Router. D. Next Hop Router.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
57
Question: 160
Which two protocols are used for the dynamic signaling of MPLS labels (Choose two)? A. RSVP-TE B. CSPF C. PNNI D. LDP
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
58
Question: 163
Which of the following are accurate statements about the PE device in a service providers MPLS network? (Select three) A. A PE router only connects to CE devices. B. A PE router only connects to P routers. C. A PE router connects to at least one P router. D. A PE router connects to at least one CE device. E. PE routers support many different interface types connecting to CE devices. F.PE routers only support Ethernet interfaces connecting to the CE.
Answer: B, C, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
59
Question: 166
Which of the following are NOT examples of a VPN service offered on the Alcatel-Lucent 7750 SR? Choose two. A. VPWS Virtual Private Wire Service B. VPLS Virtual Private LAN Service. C. VPRN Virtual Private Routed Networks. D. MLPPP Multi-link Point-to-Point protocol E. VPDFS Virtual Private Dark Fiber Service.
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
60
Question: 169
SAPs may be a port, a port with a specific VLAN tag in the case of an Ethernet port, or a port with a specific Circuit ID in the case of ATM or Frame Relay. A. True B. False
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
61
Question: 172
How does a VPRN service avoid the problem overlapping IP addresses from different customers? A. You cannot have overlapping IP addresses. The service provider must ensure that its customers are all using discrete IP address space. B. Each VPRN service maintains a separate VPN routing and forwarding instance to separate customer routing information. C. A VPRN will ignore IP addressing information and use MAC addressing instead which are always unique. D. A VPRN will translate customer IP addresses to a private addressing scheme administered by the service provider.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
62
Question: 175
Which of the following mediums can be used in a VPWS when defining SAPs (Select three)? A. Ethernet. B. ATM. C. Frame Relay. D. Token Ring.
Answer: C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
63
Question: 178
If a customer requires a multipoint layer 2 VPN service between three or more locations which VPN service is best suited for this customer? A. Virtual Private Wire Service B. Virtual Private LAN Service C. Virtual Private Routed Networks D. Virtual Private Dark Fibre Service
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
64
Question: 181
What is the network layer responsible for? A. Providing the physical address to the packet. B. Determining the path to the remote host. C. Providing reliable communications from host to host. D. Formatting the PDU.
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
65
Question: 184
Which of the following are data rates defined for Ethernet operation over copper and fiber optic cabling? (Choose three.) A. 1 Mbps B. 10 Mbps C. 1000 Mbps D. 10,000 Mbps
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
66
Question: 187
The Media Access Control (MAC) sub-layer is responsible for which two functions? (Choose two.) A. Directly interface with the transport layer B. Link integrity testing C. Physical addressing D. Data transmission synchronization
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
67
Question: 190
An Ethernet switch with redundant links has the following entries in its Forwarding Data Base (FDB): MAC Address Port ------------------- -------00:60:AC:1F:E0:11 1 00:F0:DE:12:3C:87 2 It receives on port 2 a frame with the source Media Access Control (MAC) address 00:60:AC:1F:E0:11, and destination address 00:F0:DE:12:3C:87. What will the switch change in its FDB? A. It will remove the previous entry for MAC 00:F0:DE:12:3C:87 and replace it with a new one mapping this address to port 1 B. It will set a timer on the previous entry for MAC 00:60:AC:1F:E0:11 and create a new entry mapping this address to port 2 C. Replace the previous entry for MAC 00:60:AC:1F:E0:11 with a new one mapping this address to port 2 D. It will create a new entry for MAC address 00:60:AC:1F:E0:11 mapping this address to port 2 and a new entry for MAC address 00:F0:DE:12:3C:87 mapping this address to port 1
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
68
Question: 192
When a Rapid Spanning Tree Protocol (RSTP) switch receives a topology change Bridge Protocol Data Unit (BPDU), how does it propagate this information through the network? A. It sends it directly to the root switch B. It floods it throughout the network C. It forwards it hop-by-hop through the network D. It forwards it only through its root port E. It processes the topology change but does not propagate the BPDU
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
69
Question: 194
Which two 7750SR Service Router physical access methods are used to perform Out of Band (OOB) management? (Choose two.) A. Console port B. Management Ethernet port C. Access ports D. Network ports
Answer: A
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
70
Question: 197
Given the following: Network address: 190.160.0.0 Network prefix: /19 What are the network and broadcast addresses for the third subnetwork? (Choose two.) A. 190.160.64.0 B. 190.160.64.255 C. 190.160.95.255 D. 190.160.96.0
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
71
Question: 200
You have a class B network with a 255.255.255.0 mask. Which of the following are true of this network? (Select two) A. There are 256 usable subnets B. There are 50 usable subnets C. There are 254 usable host addresses for each subnet D. There is one usable subnet
Answer: D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
72
Question: 202
You want to integrate a new network into an existing IP Wide Area Network. The current network configuration is as follows: Network address: 208.40.224.0 Network prefix: /27 Number of subnetworks: 6 If Variable Length Subnet Masking (VLSM) is used, what prefix is required to support an additional 7-host LAN segment? A. /24 B. /27 C. /28 D. /29 E. /30
Answer: B, C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
73
Question: 205
Represent the following list of addresses as the most accurate aggregate route: 60.48.0.0/24 60.48.1.0/24 60.48.2.0/24 60.48.3.0/24 60.48.4.0/24 60.48.5.0/24 60.48.6.0/24 60.48.7.0/24 A. 60.48.0.0/16 B. 60.48.0.0/17 C. 60.48.0.0/21 D. 60.48.0.0/24
74
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
75
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
76
Question: 214
What network type does not require DR/BDR elections for OSPF routers to form an adjacency with one another. A. Point-to-Point B. Broadcast C. Non-Broadcast Multi-access D. Point-to-Multipoint E. Unicast
Answer: A, C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
77
Question: 217
In what OSPF area type will one see Type 7 LSAs. A. Not So Stubby Area (NSSA) B. Stub Area C. Backbone Area D. Normal Area
Answer: A, C
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
78
Question: 220
What LSA types will be advertised by an ASBR router for external routes? A. LSA Type 1 B. LSA Type 4 C. LSA Type 3 D. LSA Type 5
Answer: B, C, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
79
Question: 223
What is the range for BGP Private AS numbers? A. 0-2400 B. 0-64511 C. 64512-65535 D. 65000-65535.
Answer: A, D
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
80
Question: 226
How does BGP set-up an internal BGP peering session? A. BGP uses I-BGP to discover a route to the internal BGP speaker and then establishes a peering session. B. BGP requires an IGP to discover a route to the internal BGP speaker and then uses E-BGP to establish a peering session. C. BGP requires an EGP to discover a route to the internal BGP speaker and then uses I-BGP to establish a peering session. D. BGP requires an IGP to discover a route to the internal BGP speaker and then is able to establish an I-BGP peering session.
Answer: B
For interactive and self-paced preparation of exam 1Z0-054, try our practice exams. Practice exams also include self assessment and reporting features
81