A B C D E F G H J K L M N P R S T

E2019049 03-23 RELEASED

E2026558 10-23 REMOVED 3514GSI S5

1 1

7.9
[202 ]
CRANKCASE
2 REAR FACE 2
8.3 1.1 9.3 13.3 77.2 88.5 90.9 98.1 TA
[210 ] [29 ] [235 ] [338 ] [1962 ] [2248 ] [2310 ] [2491 ]
15 BACK PORT
25 2X 1.3 68 WA D 67 UU
[34 ]
LIFTING .0 q CRANKSHAFT
EYES [0] 14

3 63.3
3
3.5
[1607 ] [89 ]
.5
5.5
[13 ] 6.0 [140 ]
[152 ] UA
W
5
53.0
[1346 ] 17
4 6 4

44.7 44.7
30 16 BACK PORT
[1136 ] [1136 ] .0 7.3 9.5
[0] [186 ][241 ]
FLYWHEEL
37.8 HOUSING FACE
[960 ]
5 5
GA
SOLENOID VALVE DETAIL
SCALE 0.250

C
C
Y
A
6 .0 6
[0]
2X 16.3 3.4
LA
[414.3 ] [87 ]
59 JA
B
NA 5.1
45 $ [129 ]
2.2
[56 ] 45 $
4.5
7 71 [114 ] 7
.0 q CRANKSHAFT
[0]

73 2X 5.0
[126 ] 81.5
[2069 ] 32
SEE SOLENOID 9.4
VALVE DETAIL [239 ]
8 2X 16.1 AA
GROUND STUD LOCATION
[409 ]
DETAIL VIEW

MAKE NO REVISIONS ON
16.5

THIS REPRODUCIBLE
[420 ] (SHOWN WITH AUX. WATER REMOVED)
18.0 1.5 X12
[458 ] 10 [38 ]

CREO
1.0
[25 ] PRICE CODES
SEE NOTE 2 2X Q 74 PA 9 X6 XX 1 F 27 69 87 70 72 10 Z 61 84 P1610J40, F3524GSI S5 (W/ESM2 INCLUDES AFR2)

-B
10.3 13.8 25.5 SEE 69.1 76.4 80.0 90.0 92.7 98.2 115.4 126.3
[260 ] [351 ] [647 ] GROUND STUD [1754 ] [1942 ][2032 ] [2286 ] [2355 ] [2494 ] [2932 ] [3208 ]
DETAIL VIEW NOTES:

ECO E2026558 REV No.

.0
[0] 1. OVERALL LENGTH OF ENGINE: 134.6 [3418 ]
10 FLYWHEEL OVERALL WIDTH OF ENGINE: 71.9 [1827 ]
HOUSING FACE RIGHT SIDE VIEW OVERALL HEIGHT OF ENGINE: 74.0 [1879 ]
ESTIMATED DRY WEIGHT OF ENGINE: 16.225 LBS [7.360 KGS]

2. DIMENSION TAKEN FROM THE CUSTOMER CONNECTION

BOLT SURFACE OF THE FLYWHEEL.

MODELS DIMENSIONS ARE IN INCHES [MM]

F3524GSIGC S5 DESCRIPTION

11 FOR GAS COMPRESSION SPEC. W/ESM2 & AFR2

INSTALLATION DRAWING
THIRD ANGLE PROJECTION
REFERENCE DOCS.
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D L-08087-14
CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.
250
A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 1 OF 7
 A B C D E F G H J K L M N P R S T
E2019049 03-23 RELEASED
E2026558 10-23 REMOVED 3514GSI S5

1 1

1.00"
27 69 70 .63"
2 2
6.00"
96.7
[2457 ]
4 .5 L EE 68
[13 ]

3 3
2.00"-8 NPT

53.0 4X n .75"
[1346 ]
4 SECTION B-B 4

6.5
[165 ]
2.00" ANSI 125# FLAT FACE FLANGE
SCALE 0.500
FILTER HOUSING
REMOVAL SPACE

1.13"
FA
5 .88" 5
20

E 7.00"

6 19.4 M 2.94" 6
[493 ]

10.6
SEE DETAIL A [270 ]
4X .75"
SECTION A-A
7 7
.0 q CRANKSHAFT
[0]
2.50" ANSI 150# FLAT FACE FLANGE
SCALE 0.380
J

G
8 11.8
[301 ]
16.1

MAKE NO REVISIONS ON
THIS REPRODUCIBLE
[409 ] 18 21 45 $

CREO
28 SA Q X2 21 49 V F H 18 48 9 X6 P 10

102.5 84.5 58.6 10.3 .0

-B
[2603 ] [2146 ] [1489 ] [260 ] [0]
FLYWHEEL
LEFT SIDE VIEW

ECO E2026558 REV No.

HOUSING FACE
DETAIL A
10 SCALE 0.250

MODELS DIMENSIONS ARE IN INCHES [MM]

F3524GSIGC S5 DESCRIPTION

11 W/ESM2 & AFR2

FOR GAS COMPRESSION SPEC. INSTALLATION DRAWING
THIRD ANGLE PROJECTION
REFERENCE DOCS.
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D L-08087-14
CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.
250
A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 2 OF 7
 A B C D E F G H J K L M N P R S T
E2019049 03-23 RELEASED
E2026558 10-23 REMOVED 3514GSI S5

1 23.8 25.1 1
[604 ] [638 ]

BACK 15
2 14 2

19.9
BACK UA 20 30.0
[506 ]
[499 ] [762 ]
5.4
[138 ]
4 67 TA 68 W 25
3 3

16
17 BACK

22.6 $ 56.8 30
8X n .69 [1443 ]
4 22.7 24.4 24.7 53.0
4
[576 ] [621 ] [626 ] [1346 ]
53.8
13.6 [1366 ]
[346 ]
Y

SOLENOID VALVE DETAIL UU

5 8X n .75 SCALE 0.380

5 5
FA

D AB

M 49
19 21
6 6

PA
16.3
[415 ]
S

7 ROTATION 1 7
18
4.5 1.3 R
[114 ] [34 ] 48
.0 q CRANKSHAFT .0
[0] [0]
G

45 $
8
SEE SOLENOID
VALVE DETAIL

MAKE NO REVISIONS ON
THIS REPRODUCIBLE
16.5
[420 ]

18.0
[458 ]

CREO
71 20 Q 10 28 32 10

-B
ECO E2026558 REV No.
33.7 1.0 .0 21.8 48.2 51.5 31.3 19.4 .0 15.4 2X 19.0
[856 ] [25 ] [0] [554 ] [1223 ] [1308 ] [796 ] [494 ] [0] [391 ] [483 ]
10

FRONT VIEW REAR VIEW

MODELS DIMENSIONS ARE IN INCHES [MM]

F3524GSIGC S5 DESCRIPTION

11 FOR GAS COMPRESSION SPEC. W/ESM2 & AFR2

INSTALLATION DRAWING
THIRD ANGLE PROJECTION
REFERENCE DOCS.
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D L-08087-14
CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.
250
A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 3 OF 7
 A B C D E F G H J K L M N P R S T
E2019049 03-23 RELEASED
E2026558 10-23 REMOVED 3514GSI S5

1 3.563 1
[90.49 ]
8X 45 $
3.5 1.938
1.50"-11.5 NPT [89 ] .61 12X 30 $ [49.21 ]
11
[15.4 ] .188
[4.76 ]

2 3.5 2
[89 ] 12 20.50
[520.7 ]
5.1177 -5.1189
4X .38 [129.99 -130.02 ]

48 [9.7 ]
28.8770 -28.8800

LUBE OIL STRAINER FLANGE [733.4758 -733.5520 ]

3 3
22.5010-22.5060
[570.7826-571.6524]

AIR CLEANER DOOR OPENS OR 18

CLOSES FROM LEFT OR RIGHT 114.7
57.3 [2912 ] 27.25
[1455 ] 21
[692.15 ]
4 AIR CLEANER FILTER 110.9 4
SERVICE CLEARANCE [2818 ]
R
4.438
[112.71 ]
S
FLYWHEEL DETAIL SECTION A-A
M
SCALE 0.125
48
FA
5 5
49
AB
19 .88"
L
.69"
28.1 .06"
[713 ]
6 24.8 18 21 73 5.00"
6
[629 ]
68
19.6
18.2 [497 ]
[463 ] 1.95" 2.88"
15.5
[394 ]

68 20
7 4X n .62" 7
5
SECTION A-A

8X n .875 .0
[0]
q CRANKSHAFT
1.50" ANSI 150# RAISED FACE FLANGE
SCALE 0.380
JA
25
8
87
1.19"

MAKE NO REVISIONS ON
THIS REPRODUCIBLE
84 .94"
6
16.6
[422 ] .06"
17.9 74
[454 ] 7.50"

CREO
18.9
24.2 [479 ]
[615 ] 3.57" 5.00"

30.2

-B
26.3
[766 ] [669 ]

ECO E2026558 REV No.

2X 30.8
73 74 PA D 27 69 70 72 61 [782 ]
4X .75"
SECTION A-A
10
12.9 14.3 50.3
[328 ] [362 ] [1276 ]
.0
[0] 3" ANSI 150# RAISED FACE FLANGE
FLYWHEEL SCALE 0.250
HOUSING FACE
TOP VIEW MODELS DIMENSIONS ARE IN INCHES [MM]
F3524GSIGC S5 DESCRIPTION

11 FOR GAS COMPRESSION SPEC. W/ESM2 & AFR2

INSTALLATION DRAWING
THIRD ANGLE PROJECTION
REFERENCE DOCS.
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D L-08087-14
CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.
250
A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 4 OF 7
 A B C D E F G H J K L M N P R S T
E2019049 03-23 RELEASED
E2026558 10-23 REMOVED 3514GSI S5

1 1
ENGINE CONNECTION INDEX NOTES:
27. AUXILIARY WATER INLET - 2.00" ANSI 125# FLAT FACE FLANGE. (SEE SHEET 2)
1. FUEL GAS INLET - 2.00"-11.5 NPT.
28. PRELUBE MOTOR EXHAUST (VENT) - .375"-18 NPT. (SEE NOTE 1) 1. ALL GAS VENTED AND/OR DISCHARGED FROM ENGINE EQUIPMENT
4. JACKET WATER OUTLET FOR 4.00" ANSI 125# FLAT FACE FLANGE MUST BE PIPED TO A SAFE AREA TO MEET APPLICABLE CODES.
30. PRELUBE CONTROL VALVE SOLENOID OUTLET - .50"-14 NPT, WITH REMOVEABLE MUFFLER. (SEE NOTE 1)
5. FRONT LIFTING EYES - 1.50" [38.1] DIA. HOLES. 2. ROTATIONS ARE VIEWED FROM THE REAR (FLYWHEEL END).
32. GROUND STUD - .50"-20UNF-2A.
6. REAR LIFTING EYES - 1.50" [38.1] DIA. HOLES.
2 40. CLEARANCE REQUIRED TO REMOVE OIL FILTER ELEMENT. 3. FLEXIBLE CONNECTION REQUIRED AT THE FUEL INLET 2
9. ENGINE MOUNTING HOLES (12) .88" [22.5] DIA. HOLES. LOCATION(S) TO ISOLATE ENGINE VIBRATION FROM FUEL
48. LUBE OIL STRAINER FLANGE FACE (SEE SHEET 4) PIPING LOCATE AS CLOSE TO ENGINE AS POSSIBLE.
10. LUBE OIL DRAIN - 2.00"-11.5 NPT.
49. CENTERLINE ABOUT ITEM 21 CAN BE ROTATED (APPROX MAX ANGLE OF ROTATION 180°) 4. UNLESS OTHERWISE SPECIFIED, ALL "NPT" PIPE THREADED
11. .75"-10UNC-2B TAP 1.25" [32] DEEP, 12 HOLES EQUALLY SPACED (SEE SHEET 4) ENGINE CONNECTIONS ARE FEMALE THREADS.
59. POWER DISTRIBUTION INTERFACE 24V DC, .375" - 16UNC STUDS
12. 1.0"-8UNC-2B TAP 2.00" [50] DEEP, 8 HOLES EQUALLY SPACED.
61. CUSTOMER INTERFACE, HARNESS CONNECTION FOR ECU - 50 FT. (SHIPPED LOOSE)
14. STARTER VALVE SOLENOID OUTLET - .25"-18 NPT, WITH REMOVEABLE MUFFLER. EQUIPMENT INDEX
67. COOLANT AIR BLEED VENT - (2) .375"-18 NPSF.
3 15. STARTER VALVE SOLENOID SUPPLY - .25"-18 NPT. A. SAE NUMBER 00 FLYWHEEL HOUSING 3
68. AUXILIARY WATER AIR BLEED CONNECTION - (2) .125"- 27 NPT.
16. PRELUBE VALVE SOLENOID SUPPLY - .50"-14 NPT. B. TIMING HOLE
69. AUXILIARY WATER OUTLET TO COOLING SYSTEM - 2.00" ANSI 125# FLAT FACE FLANGE (SEE SHEET 2)
17. STARTER CONTROL VALVE SOLENOID TO AIR/GAS STARTER RELAY - .25"-18 NPT. C. ENGINE WATER DRAIN (2)
70. AUXILIARY WATER BYPASS FROM CUSTOMER EQUIPMENT - 2.00" ANSI 125# FLAT FACE FLANGE (SEE SHEET 2)
18. LUBE OIL STRAINER INLET FROM LUBE OIL FILTER, 1.50" ANSI 150# RAISED FACE FLANGE D. GOVERNOR/ACTUATOR, ELECTRIC
71. FRONT STUB SHAFT, 3.500"/3.499" DIA., .875" SQ X 8.00" LG KEY
19. JACKET WATER INLET FLANGE FOR 4.00" ANSI 125# FLAT FACE FLANGE. E. SAFETY GUARD.
72. AUXILIARY WATER CONNECTION TO SURGE TANK, .75"-14 NPT
F. LUBE OIL DIPSTICK (BOTH SIDES)
4 20. AUXILIARY WATER OUTLET - 2.50" ANSI 150# FLAT FACE FLANGE (SEE SHEET 2). 4
73. STARTER MOTOR AIR/GAS INLET - 1.50" ANSI 150# RAISED FACE FLANGE (SEE SHEET 4)
21. LUBE OIL COOLER OUTLET TO LUBE OIL FILTER, 1.50" ANSI 150# RAISED FACE G. LUBE OIL FILL LOCATION
FLANGE (SEE SHEET 4) 74. STARTER MOTOR AIR/GAS OUTLET - 3.00" ANSI 150# RAISED FACE FLANGE (SEE SHEET 4)
H. LUBE OIL STRAINER
22. LUBE OIL FILTER INLET FROM LUBE OIL COOLER - 2.00" ANSI 150# RAISED FACE FLANGE. 83. USB FLASH DRIVE DATA DOWNLOAD PORT
J. PRELUBE PUMP
23. LUBE OIL FILTER OUTLET TO ENGINE LUBE OIL STRAINER - 2.00" ANSI 150# RAISED FACE FLANGE. 84. CATALYST SENSOR HARNESS CONNECTION
K. LUBE OIL FILTER ASSEMBLY (SHIPPED LOOSE)
24. FEET FOR LUBE OIL FILTER MOUNTING - (4) DIA. .56" HOLES, DIAM. 14.75" BOLT CIRCLE. 87. LUBE OIL PRESSURE PRE-FILTER HARNESS CONNECTION
L. CRANKCASE BREATHER (CLOSED)
5 25. EXAUST OUTLET CONNECTION FLANGE FOR 6.00" ANSI 125# FLAT FACE FLANGE. 5
NOTE: EXHAUST SYSTEM MUST SUPPORT ITS OWN WEIGHT BEYOND THIS POINT. M. AIR CLEANER (1)
P. MANUAL BARRING DEVICE
Q. ENGINE LEVELING BOLTS (4) 1.00-8UNC-2A THREAD
2X 13.4 2X 15.4 2X 22.3 2X 46.3 2X 58.3 2X 82.3 2X 92.3 2X 94.3 R. FLEXIBLE METAL HOSE - 24" [610] LONG. (SHIPPED LOOSE)
[339.7 ] [390.5 ] [565.2 ] [1174.8 ] [1479.6 ] [2089.2 ] [2343.2 ] [2394 ] --LUBE OIL INLET TO LUBE OIL STRAINER--
6 S. FLEXIBLE METAL HOSE - 24" [610] LONG. (SHIPPED LOOSE)
6
--LUBE OIL OUTLET TO OIL COOLER--
12X 9
V. LUBE OIL COOLER

19.0 W. FLEXIBLE EXHAUST CONNECTIONS (SHIPPED LOOSE)

[482.6 ] Y. ENGINE JACKET WATER PUMP

18.0 Z. AUXILIARY WATER PUMP

[457.2 ]
7 AA. ENGINE LUBE OIL PUMP 7
15.2 EE. AIR CLEANER RESTRICITION INDICATOR
AA [385.8 ] UU. SHUTDOWN CONTROL (1)
71 XX. IPM-D (IGNITION POWER MODULE-DIAGNOSTIC)

FA. MICROSPIN LUBE OIL FILTER

GA. ECU (ENGINE CONTROL UNIT)
8 .0 q CRANKSHAFT
[0] HA. BATTERY BOX (SHIPPED LOOSE) - 23.37" X 11.39" X 13.74"

MAKE NO REVISIONS ON
THIS REPRODUCIBLE
JA. ENGINE POWER DISTRIBUTION JUNCTION BOX, 24 VOLT DC

LA. AIR/GAS STARTER

15.2 NA. ALTERNATOR

[385.8 ]
PA. CENTER OF GRAVITY
9 THE DESIGNATES THE APPROXIMATE LOCATION

CREO
OF THE CENTER OF GRAVITY OF THE ENGINE.
18.0 THIS LOCATION IS ONLY AN APPROXIMATE FOR
[457.2 ] THE PURPOSE OF DESIGNING LIFTING EQUIPMENT
FOR THE ENGINE. THIS CENTER OF GRAVITY
IS GIVEN AS A DRY WEIGHT CONDITION.

-B
19.0
[482.6 ] SA. PRELUBE MOTOR

ECO E2026558 REV No.

TA. PRELUBE CONTROL VALVE
10 UA. STARTER CONTROL VALVE

VA. HMI (HUMAN MACHINE INTERFACE) (SHIPPED LOOSE)

WA. INTEGRATED ACTUATOR VALVE

AB. STU (SMART THERMOCOUPLE UNIT)

.0 8.1 4X Q 100.2 28 MODELS DIMENSIONS ARE IN INCHES [MM]
[0] [204.7 ] [2544.8 ] F3524GSIGC S5

BOTTOM VIEW
DESCRIPTION
FLYWHEEL
11 HOUSING FACE
W/ESM2 & AFR2
INSTALLATION DRAWING
FOR GAS COMPRESSION SPEC. THIRD ANGLE PROJECTION
REFERENCE DOCS.
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D L-08087-14
CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.
250
A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 5 OF 7
 A B C D E F G H J K L M N P R S T
E2019049 03-23 RELEASED
E2026558 10-23 REMOVED 3514GSI S5

1 1
.04 -.24
[2-6 ]
THICKNESS OF WALL
OR CONTROL CABINET PANEL

2X 11.9
2 [303 ] 2

12.0
[304 ]

22

3 3
8.98
[228 ]

4 4

40

5 5
75.0
[1905]
SECTION A-A
FILTER ELEMENT 45.2 HMI INSTALLATION CUTOUT
REMOVAL SPACE 43.6 [1148 ] SEE OPERATION & MAINTENANCE BOOK
[1106 ] FOR AIR CIRCULATION REQUIREMENTS
39.3
[998 ]
6 6
12.40
[315 ]
.5
[13.2 ]

7 7
4.5
[115 ]
23

9.41 9
[239 ] [226 ]

4.0
8 [101.6 ]

MAKE NO REVISIONS ON
THIS REPRODUCIBLE
9

CREO
VA HMI ASSEMBLY

-B
(SHIPPED LOOSE)
2 SEE INSTALLATION INSTRUCTION SHEET S-07382-186

ECO E2026558 REV No.

[48 ]

10 83
12
[302 ]

24
MODELS DIMENSIONS ARE IN INCHES [MM]
F3524GSIGC S5 DESCRIPTION

11 FOR GAS COMPRESSION SPEC. W/ESM2 & AFR2

K LUBE OIL FILTER ASSEMBLY INSTALLATION DRAWING
(SHIPPED LOOSE) REFERENCE DOCS.
THIRD ANGLE PROJECTION
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D
SCALE 0.250 CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN 250 L-08087-14
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.

A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 6 OF 7
 A B C D E F G H J K L M N P R S T
E2019049 03-23 RELEASED
E2026558 10-23 REMOVED 3514GSI S5

1 1

2 2

3 3

4 4

5 148.5 5
[3773 ]
ISO VIEW
SCALE 0.050

TOP VIEW

71.9
6 FLEX EXHAUST [1827 ] 6
CONNECTION,
(SHOWN IN PHANTOM LINES)
IS NOT MOUNTED TO ENGINE
-SHIPPED LOOSE-

7 7

LUBE OIL
STRAINER FLANGES,
83.4 (SHOWN IN PHANTOM LINES)
[2119 ] ARE NOT MOUNTED TO ENGINE
-SHIPPED LOOSE-
8

MAKE NO REVISIONS ON
THIS REPRODUCIBLE
9

CREO
12.0

-B
[304 ]

ECO E2026558 REV No.

38.5
DOMESTIC SHIPPING OUTLINE [977 ]
10 SCALE 0.075

LEFT SIDE VIEW REAR VIEW

STANDARD ENGINE WITH SHIPPING SKID,
ESTIMATED DRY WEIGHT:16.705 LBS [7.577 KGS]

MODELS DIMENSIONS ARE IN INCHES [MM]

F3524GSIGC S5 DESCRIPTION

11 W/ESM2 & AFR2

INSTALLATION DRAWING
THIRD ANGLE PROJECTION
REFERENCE DOCS.
PROPRIETARY AND CONFIDENTIAL - INFORMATION
DRW. ZMK 03-04-23 FILE C.C. PART NO.
L-08087-12 CONTAINED IN THIS DOCUMENT MAY NOT BE USED,

D L-08087-14
CHK. DTB 03-22-23 COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN
PERMISSION OF INNIO WAUKESHA GAS ENGINES INC.
250
A B C D E F G H J K L M APP. MTR 03-23-23 COPYRIGHT 2023, INNIO WAUKESHA SCALE 0.125 SHEET 7 OF 7