Format Mini Project I KMBN 152
Format Mini Project I KMBN 152
Format Mini Project I KMBN 152
FORMAT
OF
MINI PROJECT-1 REPORT
KANPUR INSTITUTE OF TECHNOLOGY
ON
“PROJECT TITLE”
Roll No.-
I hereby declare that the work presented in this report entitled, “TITLE
NAME……………………………………………………. ", was carried out
by me. I have not submitted the matter embodied in this project report for
the award of any other degree or diploma of any other University or
Institute.
I have given due credit to the original authors/sources for all the words,
ideas, diagrams, graphics, computer programs, experiments, results, that are
not my original contribution. I have used quotation marks to identify
verbatim sentences and given credit to the original authors/sources. I affirm
that no portion of my work is plagiarized, and the experiments and results
reported in the project report are not manipulated. In the event of a
complaint of plagiarism and the manipulation of the experiments and results,
I shall be fully responsible and answerable.
Student Name:
Roll. No. :
(Candidate Signature)
College Certificate
The project report embodies results of original work, and studies are carried out by the
student himself/herself and the contents of the project report do not form the basis for
the award of any other degree to the candidate or to anybody else from this or any other
University/Institution.
Signature
(Name of Supervisor)
(Designation)
Acknowledgements
Mini Project Report is the one of the important parts of MBA program, which has
helped me to gain a lot of experience, which will be beneficial in my succeeding
career.
For this with an ineffable sense of gratitude I take this opportunity to express my
deep sense of indebtedness and gratitude to Dr. Brajesh Varshnay, D i r e c t o r
Kanpur Institute of Technology and Mr. Faraz Khan, HOD, Department of
Business Administration, for their encouragement, support and guidance in carrying out
the project.
Signature
Name of Student
Roll No.:
EXECUTIVE SUMMARY
This summary should cover everything of the project, all points of the project report
shall be covered in this section, such as significance of the study, objectives, hypothesis,
research methodology, data collection analysis, interpretation, findings and
recommendations. In nut shell, executive summary should be a snap shot of the entire project
work. This summary should not exceed 2 pages.
List of Tables
Table Title of the Table Page
No. No.
List of Figures
Fig.No. Title of the Figure Page
No.
List of Symbols/Abbreviations
Symbol/ Explanation Page
Abbreviation No.
TABLE OF CONTENTS
CHAPTER 4 RESEARCHMETHODOLOGY
(Objectives, Research Design, Sources of data, secondary data, Population, , Sampling method, Method of
Data collection, Data Analysis techniques)
CHAPTER 5 DATAANALYSIS
(Note: Appropriate division of chapters can be made on the basis of size of analysis)
CHAPTER 6 FINDINGS
CHAPTER 7 CONCLUSIONS
REFERENCES
All references must be in Harvard Style as follows and must be alphabetically arranged
in the references.
Desikan,S.andRamesh,G.(2006).Softwaretesting.Bangalore,India:Dorling Kindersley,p.156.
Davidson,J.(2008).Speakherlanguage.Men’sHealth,(23),pp.104-106.
Fox,R.(2014). Technological
AdvancesinBanking.In:AmericanFinanceAssociationNortheastRegional
Conference.Hartford:AFA,p. 24.
Shaver,W.(2013).EffectsofRemediationonHigh-
StakesStandardizedTesting.PhD.YeshivaUniversity.
Important
(i) A typed draft report as per the above guidelines has to be prepared and submitted to
the guide(s), at least one week before the final evaluation of the project.
(ii) The draft report shall be corrected and approved by the guide(s). This signed draft
report is to be produced before the evaluation board at the time of final evaluation
of the project.
(iii) The final report is to be made after final project evaluation.. The corrections and
suggestions made by the evaluation board are to be incorporated in the final
report. Submit the final report along with the draft report, within one week after
final project evaluation, to the Project coordinator for getting signature of the
Head of the Dept.
Times New Roman 12 , 1.5 spacing , margins 1.5 inch on all sides
All Tables and Figures must be used in the body of the report.
All references must also be used in the body of the report with proper citation.
Page numbering:
Page numbers shall not be printed on Chapter beginning pages and Project Report facing
sheet.
Initial pages are to printed only on one side of the paper up to start of Chapter1.