Panasonic+TC 40DX650C+Ch+KM30
Panasonic+TC 40DX650C+Ch+KM30
Panasonic+TC 40DX650C+Ch+KM30
PMX1610013CE
Modelos:
TC-40DX650C
TC-49DX650C
TC-55DX650C
Chassis: KM30
Destino:Canada
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced and repaired only by experienced professional technicians. Any attempt to service or
repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
R
© Copyright all rights reserved 2016 by Panasonic de México,
S.A. de C.V.
TABLE OF CONTENTS
Page Page
Cover.
Index. 2 15 Main board A part list 48
TC-49DX650C.
1 Safety Precautions 3
1.1 General Guidelines
. 15.1 K board part list 58
1.2 Leakage Current Cold Check TC-49DX650C
1.3 Leakage Current Hot Check (See Figure 1.)
15.2 P board part list 59
2 Warning 4 TC-49DX650C
2.1 Prevention of Electrostatic Discharge (ESD)
2.2 About lead free solder (PbF) 15.3 Mechanical part list 64
TC-49DX650C.
3 Service . 5
3.1 How to enter into Service Mode. 16 Main board A part list 65
3.5 EDID Clock. TC-55DX650C.
14.3 K Board 40
TC-40DX650C.
14.5 LD Board 44
TC-40DX650C
2
1 Safety Precautions
1.1. General Guidelines
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
3. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
4. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials.
5. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the
wires have been broken or disconnected, do not attempt to repair or re-wire the units. Replace the entire wiring unit instead.
6. When conducting repairs and servicing, do not twist the Faston connectors but plug them straight in or unplug them straight
out.
1.1.1. Leakage Current Cold Check 1.1.2. Leakage Current Hot Check (See
1. Unplug the AC cord and connect a jumper between the Figure 1.)
two prongs on the plug. 1. Plug the AC cord directly into the AC outlet. Do not use
2. Measure the resistance value, with an ohmmeter, an isolation transformer for this check.
between the jumpered AC plug and each exposed 2. Connect a 1.5kohm, 10 watts resistor, in parallel with a
metallic cabinet part on the equipment such as 0.15 F capacitors, between each exposed metallic part
screwheads, connectors, control shafts, etc. When the on the set and a good earth ground such as a water pipe,
exposed metallic part has a return path to the chassis, the as shown in Figure 1.
reading should be 8.5Mohm to 13Mohm. 3. Use an AC voltmeter, with 1000 ohms/volt or more
When the exposed metal does not have a return path to sensitivity, to measure the potential across the resistor.
the chassis, the reading must be . 4. Check each exposed metallic part, and measure the
voltage at each point.
5. Reverse the AC plug in the AC outlet and repeat each of
the above measurements.
6. The potential at any point should not exceed 0.75 volts
RMS. A leakage current tester (Simpson Model 229 or
equivalent) may be used to make the hot checks, leakage
current must not exceed 1/2 milliamp. In case a
measurement is outside of the limits specified, there is a
possibility of a shock hazard, and the equipment should
be repaired and rechecked before it is returned to the
customer.
Figure 1
3
2 WARNING
2.1 Prevention of Electrostatic Discharge (ESD) The equipment is sensitive to electrostatics (ES).
Some semiconductor devices (solid state) can easily be damaged by static electricity. Usually they called Electrostatic Sensitive Devices
(ES). Typical examples of devices are integrated circuits ES, some field effect transistors and semiconducting components [chip]. The
following techniques should be used to help reduce the incidence of component damage by electrostatic discharge (ESD).
1. Immediately before dealing with any semiconductor component or semiconductor assembly. Drain out of his body the ESD charge by
touching a known ground. Together, get a wrist strap to discharge electrostatic energy, for greater protection for ESD sensitive devices.
2. After removing a semiconductor device ES, put the device in a conductive material such as aluminum foil, to prevent electrostatic
charge or increased exposure assembly.
3. Use grounded soldering iron to solder or unsolder ES devices.
4. Use only antistatic solder remover. Some remover devices are not classified as [Antistatic (ESD)] can generate electrical charge
sufficient to damage ES devices.
5. Do not use freon chemicals. These can generate electrical charges sufficient to damage ES devices.
6. No one is immediately remove its protective packaging until before you are ready to install the device. (ES devices are packaged
replacements must be protected from electrical shorts with conductive foam, aluminum foil or comparable conductive material).
7. Immediately before removing the protective material ES device, touch the protective material to the chassis or circuit assembly into
the device to be installed.
Caution
Ensure that no voltage is applied to the chassis or circuit, and observe all other safety precautions.
This model uses Pb Free solder in it’s manufacture due to environmental conservation issues. For service and repair work, we’d
suggest the use of Pb free solder as well, although Pb solder may be used.
PCBs manufactured using lead free solder will have the PbF within a leaf Symbol PbF stamped on the back of PCB.
Caution
• Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F (30~40 °C) higher. Please
use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C).
• Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb
solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
• After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the
opposite side. (see figure below)
4
3. SERVICE
How to enter into CS Maintenance Menu
3.1. Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [ RED ] button of the remote control three times within 2 seconds.
Note:
CS Maintenance Menu can not be entered when 3D signal input.
Input 2D signal to enter CS Maintenance Menu
CS Maintenance Menu
OPT
EDID CLOCK
Nota: DRV CHECK ONLY TC-40_49_55DX650W. See page 6.
WB - ADJ
CS Maintenance Menu
OPT 7 6 5 4 3 2 1 0
EDID CLK OPT 1 0 0 0 0 0 0 0 0
Row: OPT1
OPT 2 0 0 1 0 0 0 1 0 Column: 4
0: Automatico (Default)
OPT 3 0 0 0 0 0 0 0 1 1: Manual
OPT 4 0 0 0 0 0 0 0 0
WB - ADJ
CS Maintenance Menu
WB - ADJ
Exit:
Press the [Exit] button or the [Return] button on the remote control.
5
4.0 USB HDD Drive Check (Only for models with DVR check MENU)
1. Select [DRV CHECK] in CS Maintenance Menu.
2. Press [OK] button or Cursor key [Right] on the remote control.
CS Maintenance Menu
OPT
EDID CLK DataTraveler 2.0 - OK
DVR CHECK OK ERROR - NG
ERROR - NG
WB - ADJ
OK : HDD is normal
Exit:
Press the [Return] button on the remote control.
TC-40DX650C
CS Maintenance Menu
NORMAL
OPT R-GAIN G -GAIN B-GAIN
EDID CLK 80 80 77
TC-49DX650C
NORMAL
WB - ADJ R-GAIN G -GAIN B-GAIN
80 75 55
TC-55DX650C
WB- ADJ
R-GAIN 6E
WB- ADJ
R-GAIN 80 [ Le# ]
WB- ADJ
R-GAIN 77
NORMAL
[ Rigth ]
R-GAIN G -GAIN B-GAIN
COLOR TEMP NORMAL COLOR TEMP NORMAL COLOR TEMP NORMAL
80 79 74
[ Le# ] [ Le# ]
[ Rigth ]
[ Le# ]
Exit:
Press the [Return] button on the remote control.
6
5.1. System Information
5.1.1 How to access
1. While pressing [MENU] button on the remote control.
2. To select [? Help] and then to select [System Information].
RETURN
RETURN RETURN
7
5.3. Data Copy by USB Memory
Note:
SD card can not be used for Data Copy.
Purpose
(a) Board replacement (Copy the data when exchanging A-board):
When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.
(Antes de intercambiar)
Copie los datos a las USB
TV Following data can be copied.
(b) Hotel (Copy the data when installing a number of units in hotel or any facility):
When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to other TVs.
Copie a USB
Copie de la USB
5.4.Preparation
Make pwd file as startup file for (a) or (b) in a empty USB Memory.
1. Insert a empty USB Memory to your PC.
2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created by
default
(New Text Document.txt).
3. Right-click the new text document that you just created and select rename, and then change the name and extension
of the
file to the following file name for (a) or (b) and press ENTER.
File name:
(a) For Board replacement : boardreplace.pwd
(b) For Hotel : hotel.pwd
Note:
Please make only one file to prevent the operation error.
No any other file should not be in USB Memory.
8
5.5. Data copy from TV set to USB Memory 5.6.Data copy from USB Memory to TV set
1. Turn on the TV set. 1. Turn on the TV set.
2. Insert USB Memory with a startup file (pwd file) to USB 2. Insert USB Memory with Data to USB terminal.
terminal. On-screen Display will be appeared according to the
On-screen Display will be appeared according to the startup Data folder automatically.
file automatically. 3. Input a following password for (a) or (b) by using
3. Input a following password for (a) or (b) by using remote remote control.
control. (a) For Board replacement : 2771
(a) For Board replacement : 2770 (b) For Hotel : 4851
(b) For Hotel : 4850 Data will be copied from USB Memory to TV set.
Data will be copied from TV set to USB Memory. 4. After the completion of copying to USB Memory,
It takes around 2 to 6 minutes maximum for copying. remove USB Memory from TV set.
4. After the completion of copying to USB Memory, remove (a) For Board replacement : Data will be deleted after
USB Memory from TV set. copying (Limited one copy).
5. Turn off the TV set. (b) For Hotel : Data will not be deleted and can be used
Note: for other TVs.
Following new folder will be created in USB Memory for 5. Turn off the TV set.
data from TV set. Note:
(a) For Board replacement : user_setup 1. Depending on the failure of boards, function of Data
(b) For Hotel : hotel copy for board replacement does not work.
2. This function can be effective among the same model
numbers.
Data copy has been succesful. Comple on Data copy has been succesful.
Please remove the Media.
Comple on
FINISH (e.g. exchanging repair board) Please turn off TV system
ini alizing FINISH
9
6 Troubleshooting Guide
Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
6.1. Check of the IIC bus lines
6.2. How to access
6.3. SSelf-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [BLUE] button on the
remote control for more than 3 seconds.
6.4. Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the
remote control for more than 3 seconds.
6.5. Screen display
TC-40DX650C
TC-49DX650C
TC-55DX650C
10
6.6 Check Point
Confirm the following parts if NG was displayed.
DISPLAY Check Ref. No. Descrip on Check Point
H14TUN IC6950 TUNER A - BOARD
H38FRC FRC LCD PANEL
H17LAN ETHERNET A - BOARD / LAN
H96ID ID A - BOARD
H97ID2 ID2 A - BOARD
H42WiFi WiFi A - BOARD / WiFi
Exit:
Disconnect the AC cord from wall outlet or press the [POWER] button on the main unit for 3 seconds to turn off
and then turn on automatically.
Purpose:
To find the possible failure point where in LCD Panel or Printed Circuit Board when the abnormal picture is displayed.
How to Enter:
While pressing [VOLUME ( - )] button of the main unit, press [YELLOW] button of the remote control three times within 2
seconds.
How to Exit:
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
How to confirm:
If the abnormal picture is displayed, go into LCD Panel test mode to display the several test patterns.
And then, judge by the following method.
Still abnormal picture is displayed: The cause must be in LCD Panel.
Normal picture is displayed: The cause must be in A board.
Remarks:
The test pattern is created by the circuit in LCD Panel.
In LCD Panel test mode, this test pattern is displayed unaffected by signal processing for RF or input signal.
If the normal picture is displayed, LCD Panel must be okay and the cause of failure must be in A board.
11
7 Hotel mode
Item Function
Mode Select hotel mode On/Off
Input Select input signal modes.
Set the input, when each time power is
switched on.
Selection:
Off, Analogue TV, Digital TV, AV,
HDMI1,HDMI2, HDMI3, HDMI4, DisplayPort
• Off: give priority to a last memory.
Channel Select channel when input signal is RF.
Set the channel, each time power is switched
on.
Selection:
Any channel number or [-].
[-] means the channel when turns off.
Volume Adjust the volume when each time power is
switched on.
Range:
0 to 100
Vol. Max Adjust maximum volume.
Range:
0 to 100
OSD Ctrl Restrict the OSD.
Selection:
Off/Pattern1
• Off: No restriction
• Pattern1: restriction
FP Ctrl Select front key conditions.
Selection:
Off/Pattern1/All
• Off: altogether valid.
• Pattern1: only input key is valid.
• All: altogether invalid.
Pow Ctrl Select POWER-On/Off condition when AC
power cord is disconnected and then connected.
Off: The same condition when AC power
cord is disconnected.
On: Forced power ON condition.
12
8 Measurements and Adjustments
8.1 PCBs Layout TC-55DX650 series
TC-49DX650 series
TC-40DX650 series
&93&%
3&%/('
A PCB
3 3&% P PCB
$ 3&%
$ 3&%
3 3&%
:L)L
Wi- Fi
:L)L
63 63 SP
63 63 SP
TNPA6263(55”)
Output Test point Step 1 Step 2
64V TP7407/08/09 < 1V 65±5V
16V TP7410/11/12 < 1V 16±0.6V
5V TP7405/20 5.24±0.2V 5.24±0.2V
PFC TP7201/02 <340V 390V ±15V *HOT
13
9 Specifications Dimensions
Including pedestal (W × H × D)
• TC-40DX650C
Display Panel 905 mm × 573 mm × 364 mm
35.6 ” × 22.6 ” × 14.3 ”
Panel System
• TC-49DX650C
LCD panel with LED backlight
1,106 mm × 699 mm × 364 mm
Refresh Rate
43.5 ” × 27.5 ” × 14.3 ”
60 Hz
TV Set only (W × H × D)
Screen size
• TC-40DX650C
• TC-40DX650C
905 mm × 521 mm × 65 mm
40 ” class (39.5 inches measured diagonally)
35.6 ” × 20.5 ” × 2.6 ”
• TC-49DX650C
• TC-49DX650C
49 ” class (48.5 inches measured diagonally)
1,106 mm × 646 mm × 81 mm
W × H × Diagonal
43.5 ” × 25.4 ” × 3.2 ”
• TC-40DX650C
(878 mm × 485 mm × 1,003 mm) Mass
34.6 ” × 19.1 ” × 39.5 ” Including pedestal
• TC-49DX650C • TC-40DX650C
(1,086 mm × 618 mm × 1,232 mm) 14.0 (30.9 lb. ) NET
42.7 ” × 24.3 ” × 48.5 ” • TC-49DX650C
Number of pixels 16.0 (35.3 lb. ) NET
3,840 × 2,160 TV Set only
Speaker Output • TC-40DX650C
12.0 (26.5 lb. ) NET
20 W [10 W + 10 W]
• TC-49DX650C
Channel Capability (Digital/Analog) 14.0 (30.9 lb. ) NET
VHF/ UHF: 2 - 69, CATV: 1 - 135
Wireless LAN
Operating Conditions
Temperature: 0 °C - 35 °C (32 °F - 95 °F) Standard Compliance and Frequency
Humidity: 20 % - 80 % RH (non-condensing) Range *
IEEE 802.11a/n: 5.15 GHz - 5.35 GHz,
Connection Terminals
5.47 GHz - 5.85 GHz
VIDEO IN IEEE 802.11b/g/n: 2.400 GHz - 2.4835 GHz
RCA PIN (VIDEO, AUDIO-L, AUDIO-R)
COMPONENT IN Security
RCA PIN (Y, PB/CB, PR/CR, AUDIO-L, AUDIO-R) WPA2-PSK (TKIP/AES)
HDMI IN 1/2/3 WPA-PSK (TKIP/AES)
Type A connector WEP (64 bit/128 bit)
(supports “HDAVI Control 5” function)
USB 1/2 * The frequency and channel differ depending on the
Type A connector country.
USB 1: DC 5 V, Max. 500 mA * 802.11b/g/n CH1 ~ CH11 only use for United States
[Hi-Speed USB (USB 2.0)] and Canada.
USB 2: DC 5 V, Max. 900 mA Note
[SuperSpeed USB (USB 3.0)] ● Design and Specifications are subject to change
DIGITAL AUDIO OUT without notice. Mass and Dimensions shown are
PCM / Dolby Digital / Fiber Optic approximate.
OTHERS ● For the information about the power source and
power consumption refer to the nameplate on the
ETHERNET (10BASE-T/100BASE-TX) rear enclosure.
14
9.1 Specifications Mass
Including pedestal
20.0 (44.1 lb. ) NET
Display Panel TV Set only
18.0 (39.7 lb. ) NET
Panel System
LCD panel with LED backlight
Refresh Rate Wireless LAN
60 Hz
Standard Compliance and Frequency
Screen size
Range *
55” class (54.6 inches measured diagonally)
IEEE 802.11a/n: 5.15 GHz - 5.35 GHz,
W × H × Diagonal
5.47 GHz - 5.85 GHz
(1,225 mm × 697 mm × 1,388 mm)
IEEE 802.11b/g/n: 2.400 GHz - 2.4835 GHz
48.2 ” × 27.4 ” × 54.6 ”
Number of pixels Security
3,840 × 2,160 WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
Speaker Output
WEP (64 bit/128 bit)
20 W [10 W + 10 W]
Channel Capability (Digital/Analog) * The frequency and channel differ depending on the
country.
VHF/ UHF: 2 - 69, CATV: 1 - 135
* 802.11b/g/n CH1 ~ CH11 only use for United States
Operating Conditions and Canada.
Temperature: 0 °C - 35 °C (32 °F - 95 °F) Note
Humidity: 20 % - 80 % RH (non-condensing) ● Design and Specifications are subject to change
without notice. Mass and Dimensions shown are
Connection Terminals approximate.
VIDEO IN ● For the information about the power source and
power consumption refer to the nameplate on the
RCA PIN (VIDEO, AUDIO-L, AUDIO-R)
rear enclosure.
COMPONENT IN
RCA PIN (Y, PB/CB, PR/CR, AUDIO-L, AUDIO-R)
HDMI IN 1/2/3
Type A connector
(supports “HDAVI Control 5” function)
USB 1/2
Type A connector
USB 1: DC 5 V, Max. 500 mA
[Hi-Speed USB (USB 2.0)]
USB 2: DC 5 V, Max. 900 mA
[SuperSpeed USB (USB 3.0)]
DIGITAL AUDIO OUT
PCM / Dolby Digital / Fiber Optic
OTHERS
ETHERNET (10BASE-T/100BASE-TX)
Dimensions
Including pedestal (W × H × D)
1,244 mm × 776 mm × 364 mm
49.0 ” × 30.6 ” × 14.3 ”
TV Set only (W × H × D)
1,244 mm × 723 mm × 69 mm
49.0 ” × 28.5 ” × 2.7 ”
15
S15.7
< ODU_ON
> ODU_DET
REG
S15.7
TNP4G600
BE-IIC
LNB1
DiSEqC1
S5
LNB1
CI_POWER_ON >
< CI_OCP
CI
S3.3/S1.8
Power
Circuit
C, H, X
IEC
Single
TU-IIC1 S5/ S3.3 S3.3
EXT_IFAGC1 D[7:0]
10. Block diagram
CI
Debug eMMC
S3.3/ S1.2
Connector 32Gbit
IF1
EXT_IFAGC1 < FE_XRST
IFAGC1
IF1 Transport SCLK
BE-IIC IRQ EA[14:0]
Stream DATAIN[7:0] SDI
DATAOUT[7:0] WAIT RESET MMCCLK
TU-IIC1 DVB-T2/T/C SDO
CLKIN CLKOUT CD1 CE1/WE MMCCMD
SAT_AGC1 DVB-S/S2 TU_Serial_TS1 CE#1
TU_Serial_TS1 / TU_Serial_TS1_JP SYNCIN SYNCOUT CD2 OE/IOWR XERST
DEMOD S1.05 S1.0 S3.3 S1.5
I_1 (TU_Para_TS1) (TU_Para_TS1) Wired OR VAL_IN VALOUT IORD MMCDAT0-7
1
Q_1
DiSEqC1
Only L
F model 41MHz DDR1.5
FEAINP
Internal CI
Low-IF SPI-IF SPI-IF eMMC-IF
IF1 FEAINN SAW controller
ADC
IFAGC1
FLT
DVB-C
Decoder DDR3
SUB DDR3
4Gbit
I_1 DVB-T DDR3
4Gbit
AV
Q_1 Decoder Trans Port Demux OSD x80 DDR3
4Gbit
DDR3
SAT_AGC1
MAIN Decoder DDR3
1,2,3 4Gbit
x16
ATSC/QAM Controller
Dec video cursor 4Gbit
Decoder
Dec Audio
ATV Digital SIF B2R
DDR3 1866 4Gbx5
DMD Decoder
Analog AV T-CON
Digital CVBS NT71933
(FRC-TCON)
CVBS Mai
ADC n
TV Decoder Pre External Video(Analog) MJC VbyOne 8 Lane (Video)
[0] MIB
Y V-SW Scaler PQ (FRC,
YPbPr ADC Analog Video (IPNR) Sub
R Pb
Processor 3D) PANEL
[3:1] Processor External Video(HDMI) LVDS-Tx/
L Pr VbyOne 4 Lane (OSD)
mini-LVDS-Tx
V-by-One
16
VDAC PNL 3D ON
TVE
L/R in x 2 PNL TEST ON
OSD
5
BL_SOS LD
A-SW ADC
Audio
TV_SUB_ON
(Thru) DAC DSP KEYSCAN/POWER-KEY P
OPT
Optical OUT EASTER D-Chip
SPDIF
ARC OUT SW
Rx0 USB2.0-IF
USB2.0
HDMI1. (Port 1)
4 R2R
IIC Serial S5
HDMI1 Rx1 USB2.0 USB*VBUS >
HDMI BE_IIC0 Serial (port 0)
DDC* > STM < OVCUR* USB
HDMI1. Rx IIC BE_IIC1
HPD* < STM 1 USB Power SW
4
HDMI_5V_DET* > STM MUX STM-IIC BE_IIC2 USB-2
x4
IF
Rx2 Serial x4 S5
HDMI2 ADx8
DDC* > STM CLK STM-Serial0 USB3.0 USB*VBUS >
HDMI2. ARM (Port 2) < OVCUR* USB
HPD* < STM GEN
0 Power SW
HDMI_5V_DET* > STM
Common-Reset USB-3
HDMI3 Rx3 USB2.0 S5
DDC* > STM (Port 3) USB*VBUS >
HPD* < STM HDMI2. μP < OVCUR* HDD-USB
HDMI_5V_DET* > STM 0 Power SW
A-Chip ETHER-IF USB-1
USB3.0-IF
(3.0 HDD)
24MHz S5 STB5.3
For Wake up On Wireless (Euro)
Rch:10W OVP
Safety SOS 10/100M
Circuit
< MON_MUTE
< SP_HP_MUTE
PWMA
PWM_ENB >
PWMOUT
11 Assembly and disassembly instructions TC-40DX650C.
11.1. Procedure disassembly of the unit. 11.3 Power Plate
11.2 Pedestal Disassemble 1. Disconnect connectors.
1. Remove the 4 screws (M4x12). 2. Remove the 4 screws (THEJ036J).
2. Remove the pedestal. 3. Remove the plate PCB P.
Model No. Part number Description Qty. Unit Remarks Model No. Part number Description Qty Unit Remarks
1 TBL3AX00321 PEDESTAL COMPLETE ASSY 1 PCE D 1 THEJ036J M3 SCREW(A5/P7) 5 PCE
TC-40DX650C TC-40DX650C
2 TBL5ZX09031 STAND_METAL_ASSY 1 PCE 2 TZRNP11SNUL SKD ASSEMBLIES P PRINT 1 PCE
A, B,C (KIT)
A
Arriba
㼼3
㼼3
3
Stick the barrier as 1
showed
㼼3
㼼3
Front view
Slide button
on the key holes.
17
11.7 PCB LD 11.8 MAIN BOARD PCB A
Model No. Part number Description Qty Unit Remarks Model No. Part number Description Qty Unit Remarks
1 TZRNP12VUUD PCB LD COMPLETE PCE 1 TXN/A1SNUL PCB A COMPLETE PCE
TC-40DX650C TC-40DX650C
2 THEJ036J M3 SCREW(A5/P7) PCE 2 THEJ036J M3 SCREW(A5/P7) PCE
1
2
2
Detalle A
Pines Guia
Detalle B
SP_BRACKET_LOWER_R SP_BRACKET_LOWER_L
Detalle A
3
1
SP_BRACKET_LOWER_R SP_BRACKET_LOWER_L
2
posicion de
conector
4
1
Detalle B
2
5
SPEAKER FIXING ( R ) SPEAKER FIXING ( L )
Terminal
Terminal
2 1
18
11.11. PCB K
Model No. Part number Description Qty. Unit
1 TXN/K1ERVX K PRINT(FINISHED) PCE
2 KK5ZC50583 LED_PANEL PCE
TC-40DX650C
3 TKP5ZA53601 LED_PANEL_CASE PCE
4 TZLP861YSUA LCD PANEL ASSY PCE
Detail A
2
Detail A
3
8
1 4
2 7
6
19
11.13 Connection diagram
Please confirm that the correct placement of PET TAPE, as shown in the picture.
Tape 45°
Tape 45°
Tape sobrante
adherirlo debajo
del Heat sink
Tape por
debajo de cable
LVDS
20
12 Instructions de ensamble y desensamble TC-49DX650C.
12.1. Disassembly procedure Unit. 12.3 plate power and main board.
12.2 Disassembly of pedestal 1. Disconnect connectors.
1. Remove 4 screws (M4x12). 2. Remove the 4 screws (THEJ036J).
2. Remove pedestal.
Model No. Part number Description Qty. Unit Remarks Model No. Part number Description Qty Unit Remarks
TBL3AX00331 PEDESTAL ASSY 1 1 TXN/A1SMUL PCB A COMPLETE 1 PCE
1 PCE D
TC -49D X650C TC-49DX650C 2 THEJ036J SCREW M3 PCE
2 TBL5ZX09041A STAND_METAL_ASSY 1 PCE A, B,C (KIT)
3 TZRNP11SMUL PCB P COMPLETE 1 PCE
A
D 11
B 3
3
1
21
12.6 Vesa metal 12.7 Wifi module
Model No. Part number Description Qty. Unit Model No. Part number Description Qty. Unit Remarks
1 TKP5ZA52001 WIFI_BRACKET PCE
1 TUX5ZX1001 BOTTOMMETAL 2 PCE
T C -49D X650X/W TC-49DX650C 2 N5HBZ0000114 WIFI_MODULE PCE
2 TUX5ZX0371 VESA METAL 4 PCE 3 THEJ036J SCREW M3 PCE
Detail A
Detalle A
2
Detail A
Make sure
that the rear
hook is
inserted into
the panel
prior to
Detail A fixation
screw.
Detalle B
22
12.10 LCD PANEL
Model No. Part number Description Qty. Unit Model No. Part number Description Qty. Unit
1 TEW4GA002 CONDUCTIVE TAPE PCE TC-49DX650C 1 TEWF097 ALUMINUM TAPE (W15*L40) PCE
T C -49D X650C
2 TZLP193KFCQ1 LCD PANEL COMPLETE PCE Cuando se pega la AL-cinta,
esta área debe no demasiado
apretado.
1
1
Area de Pegado
10mm 1mm
2
A A
B B
Area B䠖El Conductive-tape should be conected with PCB as showed on picture Detail A
12.11 HARNESS
Model No. Part number Description Qty. Unit Notas
1 TSCKF1050036 LVDS CABLE PCE
2 K1HY05YY0241 WIFI USB CABLE PCE
TC-49DX650C 3 TXJA02SMUL A02-P2 wire PCE
4 TXJA10SMUL A10-K10 wire PCE
5 TXJA12SMUL A12-SP / SPR HARNESS PCE
4
5
1
2
23
12 Connection diagram
Please confirm that the correct placement of PET TAPE, as shown in the picture, prevent harnesses improperly connected..
13 pcs x 60mm
1 pcs x 110mm
24
13 Instrucciones de ensamble y desensamble TC-55DX650C.
13.1. Procedure disassembly of the unit. 13.3 Main board and Power board
1. Remove the wire from Connectors.
13.2 Pedestal Disassemble 2. Remove 4 screws (THEJ036J).
1. Remove the 4 screws (M4x12).
2. Remove the pedestal
Model No. Part number Description Qty. Unit Remarks Model No. Part number Description Qty. Unit Remarks
1 TXN/A1SLUL PCB A COMPLETE 1 PCE
1 TBL3AX00331 PEDESTAL ASSY 1 PCE D
TC -55D X650C TC-55DX650C 2 THEJ036J SCREW M3 PCE
2 TBL5ZX09041A STAND_METAL_ASSY 1 PCE A, B,C (KIT)
3 TZRNP11SLUL PCB P COMPLETE 1 PCE
1
1
3
B
Presione aqui
13.6 control panel Key
Model No. Part number Description Qty. Unit
TC-55DX650C 1 TBX5ZA03303 KEY_BUTTON_BRACKET 1 PCE
25
13.7 Vesa metal 13.8 Wifi module
Model No. Part number Description Qty. Unit Model No. Part number Description Qty. Unit Remarks
1 TKP5ZA52001 WIFI_BRACKET PCE
1 TUX5ZX1001 BOTTOMMETAL 2 PCE
TC-55DX650C TC-55DX650C 2 N5HBZ0000114 WIFI_MODULE PCE
2 TUX5ZX0931 VESA METAL 4 PCE 3 THEJ036J SCREW M3 PCE
DETAIL A
Detalle A
FRONT VIEW
1 DETAIL A
Make sure
DETAIL A that the rear
hook is
inserted into
the panel
prior to
fixation
screw.
DETAIL
Detalle B B
DETAIL B
3
3 2
2 3
1
1
5 26
13.7 Vesa metal 13.8 Wifi module
Model No. Part number Description Qty. Unit Model No. Part number Description Qty. Unit Remarks
1 TKP5ZA52001 WIFI_BRACKET PCE
1 TUX5ZX1001 BOTTOMMETAL 2 PCE
TC-55DX650C TC-55DX650C 2 N5HBZ0000114 WIFI_MODULE PCE
2 TUX5ZX0931 VESA METAL 4 PCE 3 THEJ036J SCREW M3 PCE
DETAIL A
Detalle A
FRONT VIEW
1 DETAIL A
Make sure
DETAIL A that the rear
hook is
inserted into
the panel
prior to
fixation
screw.
DETAIL
Detalle B B
DETAIL B
3
3 2
2 3
1
1
5 26
13.11 LCD PANEL
Model No. Part number Description Qty. Unit Model No. Part number Description Qty. Unit
1 TEWF441 AL-TAPE (W30*L90) PCE TC-55DX650C 1 TEWF097 ALUMINUM TAPE (W15*L40) PCE
TC-55DX650C
2 TZLP872YQUA LCD PANEL COMPLETE PCE
Detalle A
1
1
1 1
TEWF441(W30*L90) TEWF441(W30*L90)
13.12 HARNESS
4
2 5
27
13.13 Connection Diagram
Please confirm that the correct placement of PET TAPE, as shown in the picture.
28
14 Part list remplacement
The components identified by mark have important special features for security. When replacing any
of these components, use the parts specified by the manufacturer.
1. Resistor 2. Capacitor
Example: Example:
ERD25J104T C 100KΩ , J, 1/4W ECKF1H103ZF C 0.01MF, Z, 50V
Type Allowance Type Allowance
29
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
27+(56
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
3&%.5(027(&21752/6(16257&';&
2QO\7&';&PRGHO 7;1.(59;
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
3&%>.@7&';& 7;1.(59;
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513618/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
27+(56
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
/'33&%7&';&0RGHO
2QO\7&';&PRGHO 7=513988'
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
/'33&%7&';&0RGHO
2QO\7&';&PRGHO 7=513988'
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
/'33&%7&';&0RGHO
2QO\7&';&PRGHO 7=513988'
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0(&+$1,&$/3$577&';&
21/<7&';&
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
(16$0%/(0(&$1,&2
3RVLFLyQ &DQWLGDG &ODYH 'HVFULSFLyQ &RPHQWDULRV
7;1$618/ 3&%$&203/(7(
7;-$618/ $3/'3
7;-$618/ $.
7;-$618/ $63/635
.&$<< $&B&25'
7.8=& %$&.B&29(5
7.3=$ %27720%$&.&29(5
78;=; %277200(7$/
7;1.(59; 3&%.&203/(7(
7%;=$$ .H\%XWWRQ%UDFNHW
7=/3<68$ /&'3$1(/$66<
7;-3618/ /'/'3
7;-//%618/ /'3//%
7;-5/%618/ /'35/%
7..=& /('B3$1(/
7.3=$ /('B3$1(/B&$6(
76&.) /9'6&$%/(
70.=; 33&%B%$55,(5
.+<<< :,),&$%/(
14$<% 5(027(B75$160,77(5
7+(& 6&5(:
7=513988' 3&%/'3&203/(7(
7=513618/ 3&%3&203/(7(
7.3=$ 63B%5$&.(7B/2:(5B
7.3=$ 63B%5$&.(7B/2:(5B5B
/(<$$ 63($.(5B/5
78;=;$ 9(6$B0(7$/
7.3=$ :,),%5$&.(7
1+%= :,),B02'8/(
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
27+(56
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
3&%.5(027(&21752/6(16257&';&
2QO\7&';&PRGHO 7;1.()9;
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
3&%>.@7&';& 7;1.()9;
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=513608/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
27+(56
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
3 ..<%$ &RQQHFWRUV
0(&+$1,&$/3$57/,677&';&
21/<7&';&
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0HFKDQLFDO
3RVLWLRQ 4XDQWLW\ 3DUWQXPEHU 'HVFULSWLRQ 5HPDUNV
7;1$608/ 3&%$&203/(7(
7;-$608/ $3
7;-$608/ $.
7;-$608/ $63635
.&$<< $&&25'
7=/3.)&4 /&'3$1(/&203/(7(
7.8=& %$&.B&29(5
70.=; %$55,(5BB'/('
7.3*$ %27720B%$&.B&29(5
78;=; %27720B0(7$/
7(:*$ &21'8&7,9(7$3(
7;1.()9; 3&%.&203/(7(
7%;=$$ .H\%XWWRQ%UDFNHW
7..=& /('B3$1(/
7.3=$ /('B3$1(/B&$6(
76&.) /9'6&$%/(
7%/$; 3('(67$/$66<
.,7
0 7)3 3(77$3( 75$163$5(17
.+<<< :,),&$%/(
14$<% 5(027(B75$160,77(5
7+(& 6&5(:
7=513608/ 3&%3&203/(7(
7.3=$ 63B%5$&.(7B833(5
/(<$$ 63($.(5B/5
7%/=;$ 67$1'B0(7$/B$66<
.,7
78;=; 9(6$B0(7$/
1+%= :,),B02'8/(
7.3=$ :,),%5$&.(7
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0$,13&%$7&';&02'(/
2QO\7&';&PRGHO 7;1$6/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
27+(56
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
3&%.5(027(&21752/6(16257&';&
2QO\7&';&PRGHO 7;1.(59;
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
3&%>.@7&';& 7;1.(59;
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=5136/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=5136/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=5136/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=5136/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
33&%32:(5%2$5'7&';&
2QO\7&';&PRGHO 7=5136/8/
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
27+(56
3RVLWLRQ 4XDQWLW\ .H\ 'HVFULSWLRQ &RPPHQWV
3 .$$<$ ,QOHW2XWOHWIRU$&SRZHU
3 ..<%$ &RQQHFWRUV
3 ..<%$ &RQQHFWRUV
3 ..<%$ &RQQHFWRUV
0(&+$1,&$/3$57/,677&';&
21/<7&';&
1RWH3OHDVHEHFDUHIXOLQWKHVHOHFWLRQRISDUWVWKHGLIIHUHQFHVDUHGHVFULEHGLQUHGDOOHOVHEHLQJHTXDO
0(&+$1&,$/3$576
3RVLWLRQ 4XDQWLW\ 3DUWQXPEHU 'HVFULSWLRQ 5HPDUNV
7;1$6/8/ $35,17$66(0%/<
7;-$6/8/ $3
7;-$6/8/ $.
.&$<< $&B&25'
7.8=& %$&.&29(5
7.3=$ %27720B%$&.B&29(5
78;=; %27720B0(7$/
7;1.(59; .35,17$66(0%/<
7%;=$$ .H\%XWWRQ%UDFNHW
7=/3<48$ /&'3$1(/$66<
7..=& /('B3$1(/
7.3=$ /('B3$1(/B&$6(
76&.) /9'6&$%/(
74%$&6/8/ 2,%
7%/$; 3('(67$/$66<
.,7
70.=; 33&%B%$55,(5
14$<% 5(027(B75$160,77(5
7+(& 6&5(:
7=5136/8/ 6.'335,17
7.3=$ 63B%5$&.(7B/2:(5B/
7.3=$ 63B%5$&.(7B/2:(5B5
/(<$$ 63($.(5B/5
7%/=;$ 67$1'B0(7$/B$66<
.,7
78;=; 9(6$B0(7$/
1+%= :,),B02'8/(
.+<<< :,),B86%B&$%/(
7.3=$ :,),%5$&.(7
17.0 MAIN BOARD LAYOUT PCB A
TC-40DX650C (TXN/A1SNUL).
TC-49DX650C (TXN/A1SMUL).
TC-55DX650C (TXN/A1SLUL).
FRONT VIEW
TNPH1160 A
CN8950
CN0100
A30 CN8950
A19 14
1
A30
A02 A02 A02A
VJ2000
9 1 4
R2078
R0925
R0929
R0928
1
R0927
R0926
R0952
R0918 R0933
R0935
R0919 R0932
R0940 R0930
R0941 R0931
R0901 R0924
R8950
R8952
R8953
R8951
22 C2041 C2042 C2043 C2044 C2045
2 CN0100
F2000
R2068 R2079
R2069
R2070
R2080
R0900
TP2000
21 1 1 D2022
D2019
5 A19 C4047 D2018 D2020 D2021
L3801 C4046 1
TP2007
8
R2011
C2118
C2056
C2057
C2006
C3814
C5240
C5241
C2003
C3822
R5245
IC5240
VJ5241
C3804 C3805 C5250
C3803
R5267
C5232
C5231
C5230
C5219
C5218
C5217
C3813
R5242
C3806 C3807 R5268 C5251
L3802
L5240
TP3800
1
C5268
C5280
C5277
TP5202
TP5243
R5241
R5269
R3807
R5270
C5242
C5243
C5244
C5245
C3815
TD3803
TD3802
R3825 R3829
68
34
R3824
C5205
C5204
R3826 R3830
IC3800
67
C5211
C5212
C5213
C5214
C5215
C5216
IC5240
L5200
33
R3828 R3809 C3812 C5275 L5260
C3820
C5208
C3808
1
F5200
C5274
32
C3817
C5207
IC3800
C3809 IC5200
L3803
4
VJ6406
C3810 C5209
C6430
C5273 R5202
R6484
C6428
C3811
C5203
A12
R5201
C5201
C5202
8I C 5 2 0 0
C3816
C5272 1
C5271
C3819
C8126
1 A
C3818
TNP4G600
C5270
L3804 D8103 R8122 IC6405
C8116
TD6415
R6483
C8123 L8101
R8109
VJ6407
R8110
A10
IC8101
R8120
IC2251
C2260
7
C6429
ZA0231 ZA341 ZA0211 ZA337
C6435
C6437
C6438
R2038 IC8101
JK6400
C6434
C8131 ZA0212
C2261
R2256
R2258
R2251
D2204
C8129
IC2251
C8118
R8200
C8115
C8114
L2200
VJ8101
C8125 C8122
R2253
C2253
C8235 C8214
IC8102 C8220 C8200 C8286 C8291
8
R8233
A10
C2252
C8222
C8290
C8121
R8206
C8025
D2203
C2258
R8203
C8205 C8210 C8211 C8212 C8213
C8283
C8120
C8230 C8231
R8204
C2255 C8202
C8289
C8234 C8233 R8212 C8206 C8232
C8201
IC8102
R8207 C8215
C8353 C8280 C8221
TP2053
R8208
R8209
C8204
ZA0232
C8281
1
C8288
D5178 C8271
VJ5002
R8213
R8641
C8124
C8229
R8238 R8234
IC8201-B
IC8201-A
IC8200-B
IC8200-A
R3806 VJ3801
IC8204-B
IC8204-A
IC8201
ZA0210
IC8200
IC8204
C8287
JK6400
1
IC8202
R8636
R8648
R8643
R8217
R8218
C8238
D5174
C8245
C8228
R8205
1
C8273
C8217
R8228
R8229
C8227
C8255 C8226
C8209
C8218
A
ZA344
C4104
C4105
36
C8056
C8057
2
C8013
A17
R8216 1 1
35
1
1
C8237 1
IC8201
IC8200
VJ8006
IC8204
R6624
C8012
C8014
C8249
IC8202-A
IC8202-B
IC8202
5
R6625
C8050
A17
ZA0336
IC8000 R6623
C8250
C8721
ZA0234
R6488
A R8727
R6634
R6633
R6632
R8220 C8241
C8239
C8251
R8227
C8253 C8254
C8252
R8239
R8222 1
R6487
C8259
C8258
C8257
C8244 TD6403
C8262 C8260 C8261 A TD8806
TD8807
1 R6470
TD8810
TD6410 R6480
R6622
TD8823
TD6421
TD8822
TD6417 R6724
TD8821
ZA0201
TD8813
R6621
C6739 ZA0200
TD8812
SUFFIX.
TD8809
TD6413
R6714
TD6605
IC8203-B
IC8203-A
IC8203
ZA0233
ZA0214
R6906 G A J D L U N W R Y
C8256
R8739 R0050
R0053 R0062
R0065
R0056
R0058
R0060
B E
R0068
R0070
C8748 TD8700
TD8701 P S R0051
R0054 R0072
R0063
R0066
R0057
R0059
R0061
R0069
R0071
R0073
H C K F M V Q X T
C8263
R0052
R0055 R0064
R0067
UPPER
A18 IC8000 R0074
R0077 R0086
R0089
R8215
R8214
R0080
R0082
R0084
C8240
R0092
R0094
R0096
A18 C8264 R8221 C8243 R8226 C8265 C8266 C8267 C8268 I C R0075
R0078 R0087
R0090
R0081
R0083
R0085
R0093
R0095
R0097
8203 G A J D L U N W R Y
VN4515
VN4516
VN4535VN4523VN4511VN4517
VN4536VN4524VN4512VN4518
LOWER
C8021
C8020
C8019 H C K F M V Q X T
VN4525
VN4526
R8731
VN4538
R4137
R5904 TD8845
VN4531
VN4532
TD8846
A16
VN4519
C4050 VN4619
C4051
VN4529
VN4621 VN4620
C4052
C8022 C8031
C8023 C8018
C4053
C4054
1
C4055 VJ8003
C4056
R4150
L4001L4000
JK3104A
C4059
L4002R4151
C4060
C4061
C4062
ZA0335
C4063
L4003R4152
C4064
ZA0215
C4065
R8738
R4154R4153
TD8838 TD8840
IC8100 C3164
TD8839
R8300
ZA0202
R4155L4004
R6785
TD8836
C8300
C8113
C8109
R3215
R6701 C6741
R6700 C6740
R4156L4005
R8601
C3204
R3196 C3127
C3112 C3113
C3114 C3115
R3191
R8935
X8300
X8301
ZA0222
C8032
R8930
C8812
C8811
C3125
R4157L4006
TD6881
TD6882
R8005
R0905
R0904
C3116
C8106
C8107
C8033
TD6883
C8301
L4007
IC8100
C8110
A16A
C8112
A16
L6708
R6787
L6707
R6786
R3185
R3166
R3170
VJ8600
1
IC8601
VJ8602
C4110
R8607
C8610
VJ3101
C8104 R3171
R4139 R4143
C4111
C8611
R8735
L8100
IC8601
C4113 C8103
C4114 R4144
R4168 R4140 ZA0223
C8102 VJ8603
R8732
R4095
C4116
C4117
R8809
ZA0235
R8728
R8871
C4118
C4070
C4069
JK3101
51
C4071 ZA0219
ZA0256
C4115
1
TD8927
R4105
R4082
R8933
TD8926
TD8922 A
ZA0255
TD8921
IC8920
TD8920
CN8945 TD8923
TP4000
R8934
IC8920
TD8924
ZA0221
19 1 TD8925 C3158
L3104
R3102
C8927
C8922
R8937 FL8702
R8716
JK3102
R6801
C6889
C6817
C6818
C6814
R5750
R5748
C6887
C6885
ZA0333
C6832
IC5705 8
C6821
JK8702
ZA0254
R6763
R6760
JK8702
2 1 R6835
20
R6802 48
IC5705
R5741 C6886
C6802 C6806
ZA0340
R6877
R6876
C8940 R6805
C5722
C6859
1 C6846 C6871
C6900
C6807
R5742
C6857
C6800
C6847
R6808
C5739
C6888 C6848 R6908
R6841 R6880
C6838
IC6800
JK8703
X6800
R6844
JK3100
X6801
C6864
JK3102
1 C6849
C6842
C6893 C6894
L5701
L6803
IC6802
R6870
C6810
C6850
C5735 C6801 C6808 FL8705
R8722
TD6813
20 C6861 C6856
R6902
C6815
C6812
C6891
C6809
R6812
C6854
C6896
F5700
R5749 C5740
C5738
C5741
C6822
1
R6723
C8941
R6722
R6856
1
R6882
C6824
IC6801
C8712
C8713
R6736
C8746 R6737 IC6800 R6762
JK8703
C6905
IC6804
Q5142
R4659 C4568
JK3100
R4662
R4661
R4660
VJ0908 TU6704
R8756
R8757
TU6710
R8763
JK8705
R5162
C6730
R4610
ZA0338
R8765
R5153
L6703
T8600
TP8723
JK8705
L6955
C8716
L6706
R5147
R0916
R0942
R0943
R0917
R5148 D4552
ZA0250
1
R6954 R6953
C6970
C6985 C6988
R6956
C6950 R6950
R6955
R6951
L6953
C5920
IC6950
1
JK4701
C8606 C6963
C6971
R5098
IC6950
C6955
C6956
D4545
IC6952
L6962
R0947
R0946
C6965 C5142
R6961
R5008
R5017
IC5140
D001 VJ4510
JK8600 L6952 R6962 C6983 R5154
IC5140
R6967 L6956
R6966
C6959
C6957
VJ5008
VJ5142
IC6952
C5035
D5012
R5009
R5022
R5040
L6951 C6952
R6968
C6989
IC6951 JK4703
R4540
L6950
R4548
C6951 ZA0251
D4503 JK4702
24
C5021
1
D4542 R4515
C4588
R4516
C5020
D4540 D4539
R5023
19
D4536 D4535
D4538 D4537
D4541
R6960 D4504
TU6702
TU6703
TU6709
C6980
JK6952
R4538
R4524
L6958 C6976 D6951
JK6950
L6959 C6977 JK6951
D3200 C4596
D4523
D4534
JK6950 JK6952
R4522
R5109
C4595
D5171
R4532
IC6951
C6966 L6960
D5172 1
19 1 R4519 1 9
Q4502
JK8600
ZA0252
1 C6974
C6972
R6958 R6957
C6962 D6953
Q4502
C6978
C4591
D3200
12 JK4703A
JK4703 JK4702A
JK4702
82
R4050 R4038 R4049
ZA0327 ZA0308 R2131 ZA365 ZA0313 ZA0325 R4039 ZA0343 ZA0350 ZA368
ZA367
C2256 R2261
R2265 R2260
R4046
Q2032
Q2200
Q4001
Q4003
TP2202
Q4001
TP4052
TP4053
R2263
R2264
R2075
Q2032
R2076 R2073
Q4003
R4043 R8945
R4102
R4141 R4142
TP8949
R2071
D2205 R2074
TP2203
TP2204
TP2205
D2202
R8946
D2200
R4131
R8947
ZA0349
C2259 TP4050 TP4051
R4044 R4040
R4129
R4045 C4119
Q4002
TP2201
Q4004
R8948
TP8946
R2254
Q2200
R8760
C8722
JK8600
R4096
R4097
R4098 R4099 R4103
TP3801 TP3804 R8949 TP8722
C4120
R4167
R4084
R4166
R4083
8
Q4005
IC8706
1 Q4005
IC8706
R4106 C4109
C8739
R8759
C8740
IC4000 TP8603 C8605
R4104
TP4059
R4132
R4115
R4128
R4127
R4126
L6704 C8602 SAGC2
TP6702
C8903
D4000 Q1
C8902
R8911
R8910
D6700
JK8600
C8603 T2FEFS
ZA0346 TP8601 C8608
R6720
TP8102 ZA0227 C8601 Q2 R8603 R8604
ZA0301
R8640 D6800
D6802
R6887
C5143
R5150
R3805 C8609
TP8600
C5725
C6908
IF2N
R5736 C5724
R5740
C5726 IF2NS
TNPH1160 B
R3808
C5727
R5739
R5746
R5734
R5745
C5733 R5737
R2020
R2022
R2021
R2019
C2013
R5738 C6700
TP5705
R2028 R2030 R2029 C2021 R6885
L6700
C2022 C2024 C2023 R2027 C6701
R6825
R6730
1 IC5708
C6904
C6907
C8373 R5735 C6903
C6715 C6744
R0915
R0914
R6778
IC5708
IC5706
C5729
TP2010
TP2020
TP2019
C5728
IC5706
R6784
C3801
C3802
ZA363
R8103 C8100 R6772 R6777
R8104 R8107 L6801 R6753 C6706 LNBPWR
21
TP5706
D5700
22
C6724
R3812
R3813
R6832
C8293 R6751
R2016 R2086 C8369 C8276 R6774 C6726
CBL
L3811
C8101 R8101
R6752
R3802
R3801
R3811
R3814
R5743
C8111 C6851
C6837
C8127
R6834
TP2026 TP2014 TP2008 TP2017 TP2018
R6773
TP8101
C6839
JS2002 C6733
C8356
C8368
TP2004
C8294
TP5708
15
R6768
16
C6735
R2015 TP2013
A02
C6835
R6837
C2011 R6791 C6879 C6736
L6800
R8860
R6871 R6883
R6783 R6782
R8861
A02 A02A
R6913
R6789 R6854 C6711
C6836
C2005
I2
TP2006 TP2011 TP2009 TP2016 TP2001 TP2015
Q8802
JS2001R2014 R6790 VJ6703
C2001 R2001JS5141
Q8802
R6901
C2002 R2037 JS2000
R6738
R2036 R2035
R2004 C2007 C2000
D2000 D2001
R6868
R6847
C3823
R6848
R5262 R5260 R6817 C6713
VJ6711
VJ6712
R6741
C3824 C6723
ZA0307
R6733 VJ6702
TD8848R5901
D5260 C6708 I F A G C 1 S TU6709
R6719
TP2012 R6878
C8128 SCL2 TU6701 TU6710
TU6703
TU6702
JK6952
IFAGC2
C3826
TP8100 R6879
R6818
R6814
C3825
R5266
C8370 VJ0901
VJ0900
TP2003 R0912 LNA5V
TD8849 TD8829
C8277 R8608 C6702
R6822 RESET
TD8831
1 A R3810 R0913
TP8605
C5266 R5273
2
1
C8360
VJ0902 R6757
VJ0903 R6759
R8606
D5261 C8357 TP8606
R8929
C6719
TD8850
C8274
TD8841TD8851
C2113 IF1P
R8869 R8932 R8936 JK6951
JK6950
R6872
C2114 C5263 C6716 IF2P
ZA0329
R6794 VJ6704 TU6704
C8295 C8366
R6855
R6788
R6709
C5265 C6717
R8928
C2112
TD8828
R6715
R8923
C5264
TD8832
R6734
TD8842
TD5000
VJ6714
IC5260 C6718
C8275
R8927
14
R6793
TD8830
ZA0302
R8931 SDAS
TD8843
VJ5261
R6735 C6722
ANT
C8361
TD8844
C8029 R8926 R8924 C8921 R6758
TD8837
R8925 SDA2
R5274
C8362
R8870
VN6800
VN6801
VN6802
C8011 R8922 R8920 SCL1
R6973
R6972
R6971
R6970
1
C8000
C8001
C5262 C8363 IFAGC2S SCL
C8009 C8039 VJ0912 R6770 VJ6709
C5260
IC5260 C8720 SAGC1
C8292 C8038 R8810
C8008 C8007 TD8827 R0934 TP8715 R8729 Q1
C8352
TD8826
TNP4G600
C8928
T2FEF
R8726
C8364
TU6703
TU6704
TU6709
TU6710
C8010 TD8825 5V
C8371 C8041 R3200 C8923 C6732
TU6701
TU6702
C5267
C6731 3.3V
C8006
C8005 R8868 C6707
JK6951
JK6950
JK6952
C8278
IFAGC1 C6704
R8008
C8925 3.3VA
C8046
Q5144
R8730
C6743
TD8824 TP8821 TP6701 TU3.3V
IFAGC2
C6729
C8048 C8030 C8047 R8819
R2301
ZA0339
C8926
C8040
C8058
TP6700
L8920
C8042
C8374
C8051 R2302 L6709
IF1N
TP4010
R5145 R5146
Q5144
R8818
R0951 L8921 IF2N L6701
C8365 C5140
C8924
C8060
C6703
C8044 C5717
C8036 VJ8007
VJ8008
TD8833
R5143 R5140
C8003
R5156 VJ8005 C8059
R5203
C5210
Q5141 TP3200
SDA
R3193
C8002
C8049 C3157
D5140
R3167
Q5143 R5157 C8016 Q5141
D8105
SDA1
C8015
C8037
R3101
L3103
R8822
C5144 C3118
C8367
C3117
VJ8001
R4587 R0950 R5733
C8045
C8043
R3180 R3162
R5142 VJ5141
D3200
R8117 R5161 R5159 C3166 2.5V
VJ5140
TP5704
TP5140 R5144
Q5140
IC5704
C5718
R5160 R5158 ZA361 1.8V
TD8834
83
C8354 R3178 TU1.8V R5732
R5731
D3200
TD8818
TP0900
TD8820
C3200
Q5143
C3163
R8240 C8358 R8827 ZA0244 C5719 Q5140
TD8814
ZA0320
C3124
TP0910 TP5201 TD8819
R0921 C0902
R0920 C0903
IC5704
R5037
C8054
C8055
TD6808
TD6809
C8034
C8052
VJ5005
R0906
VJ8009
TD6811
TD6810
C5023
TD8835
D5170
R6905
R6904
R6903
VJ5007
VJ5001
TP0901
R0907 R6891
8
C8024
R5080
R8872 R8811
R6894
R6895
C5027
R6460
C5031
R6459
C8372
R8733 R8736
L6805
R6833
C6917
1 C5025 C5026 C5030
ZA0318
IC6806
TD6800
R5155
R6892
TD6801
C5032 TP5002 TP5003
C8749
TP5004
TD6802
C8700
R6896
ZA359
L6802
ZA358
R6463
ZA362
C8901
R8901
R8902
R0938
R0939
R5141
C6866
C6875
TP0909 TP0911
R8706 C6918
1
R8766 R6893
32
IC8901 8
ZA0332
C8350
IC5000
R6462
R6628
C8351
TD6607
C5247
R6456
R6461
TD6606
R3197
IC5000
IC8901
TP0914
R5243 C3107
R6627
R5244
R6637
C6600
R6635
R6636
C5246 R3168
R3184 C5105
TP6405 TP6404
L3102
R5110
R6626
C0904 C3110 R3163
ZA0330
C0901 R3169 D5027 C5104
D3110
TP6406
TP0912
1
TD8805
R8734 D3113
R3164 C3111
D3111 R5041
R8737 VJ5000
C5024 R5042
C5022
TP5241
D3112
VJ8700 TP3103 TP3102
R6912
R6911
R6910
R6909
R3173
Q4504
TP3104
D3114
C3160
R3177
R3174 C3128
TD6803
R6615 R6616 D3108 TP4509
R3195 R3189 TP3117 C3129 TP3118 Q4504
R4630
D3109 JK3102
R3194JK3101 JK3100 R3188
33
17.1 MAIN BOARD LAYOUT PCB A
TP3122
ZA0347
C3168
JK6400 R4555
D4511
1
D4520
R4545
R4546
34 C3167
R4557
2 JK3100 VJ4518
35
R4556
VJ4519
67
C4597
36 JK3101 TP4518
C4598
JK3102 ZA355
VJ4520
68
TC-49DX650C (TXN/A1SMUL).
TC-40DX650C (TXN/A1SNUL).
TP4501
TC-55DX650C (TXN/A1SLUL).
TP6470 TP6441 TP6439 TP6437 TP6435 TP6460 TP6431 TP6430 TP6453 TP6425 TP6423 TP6421 TP6419 TP6417 TP6415 TP6469
R4528
R4525
TP6467 TP6464 TP6438 TP6461 TP6459 TP6457 TP6429 TP6428 TP6426 TP6424 TP6422 TP6420 TP6418 TP6416 TP6414
TP6411
R4563
ZA357 R4526
TP6468 TP6466 TP6440 TP6462 TP6436 TP6434 TP6432 TP6456 TP6427 TP6452 TP6450 TP6448 TP6446 TP6444
TP6410
ZA354 TP4515
ZA348
C4500
C4599
R4562
TP6442 TP6465 TP6463 TP6433 TP6458 TP6455 TP6454 TP6451 TP6449 TP6403 TP6447 TP6445 TP6443
ZA0317
TP6402
TP6401
R4603
R4602
R4561
TP8951 TP8950
TP6412 TP6413
R6410
C6431
R6491
R6492
C6433 R6497
R6493
R6411
R6496
C6436 R6499
ZA0322
R6495
R6494
D4531
Q4505
R4521
R6498
R6413
TD8817 TD8808
R6412
TD8802 TD8815
R4553
R6606
R4605
R4604
TD8803
TD8804 TD8811 R6614
R4672 IC4508 R4554
R6613 TD8816
Q4505
TP4507
C4592
VJ6402
TP4508
C6432
IC4506 IC4508
C4620
JK6400 VJ4512
R4674
R4673
R4667
ZA352 R4668 R4671 VJ4513
R4669
C4613
ZA0303
R6638 TP4722
R4666 C4621
C4593
R4623 R4612 IC4506 IC4509 C4619
ZA0230
R4618 R4617
VJ4514
R4664
R4663
R4670
C4618
ZA351 D4516
VJ4600
IC4509
R4616
R5276
R4665
C4594
TP4511
R6631
R6629 8 1
20
C3207 C4580 D4517
TP4514
R6639
C4579
C4578
C4581
C3203
VJ3201
R6630 IC8703
C8706 JK8703
IC3201
R4607
R4606
1
C3202 C3205 C8707
C8714
C8715
C3206
IC3201
C3201 Q4501
ZA0229
ZA0334
VJ4511
IC8702 R8713
R8714 R8718 R4513
C4590
ZA0305 ZA0328 R8710 C8711 R8721 IC8703
TP8706 TP8707 TP8708 C8708 TP4500
R8717
C3208
R3214
IC8702 Q4501
TP3120 Q 3 2 0 2
R3213
Q3202
R3212
R4518
R4537
L8702 C8709
JK8702 L8703
Q3201
C4587 R4549 R4628
R8715
C8710
TP4506
R4517 R4551
Q3201
C8717
C3134
L3106
TP3119
R8723
C8719
TP4505 R4550
R4514
C8718
REAR VIEW
TP8713 TP8714
TP8712
TP8711
ZA353 ZA0323 TP8705
ZA0226 ZA0242 JK8703
L3105
C3135 JK8702
JK3104A
17.2 POWER BOARD & CONTROL PANEL LAYOUT
ONLY
TC-40DX650C (TZRNP11SNUL).
TC-49DX650C (TZRNP11SMUL).
FRONT VIEW
84
17.3 POWER BOARD & CONTROL PANEL LAYOUT
ONLY
TC-40DX650C (TZRNP11SNUL).
TC-49DX650C (TZRNP11SMUL
REAR VIEW
TP7417
TP7418
P2
TP7820
TP7413
ZA7102
ZA7102
TP7413 JA1
TP7822
R7883 TP7810 T P 7 8 1 0
C7820 C 7 8 2 0
C7426
CL7800
TP7811
TP7419
TP7823
TP7801
JA1 LD1 TP7801
D7809 D 7 8 0 9
C7821
T P 7 4TP7414
14
TP7820
TP74181 4 C7833
TP7417 C7426
TP7410
LD2
C7823 C 7 8 2 3
TP7410
C7822C 7 8 2 2
TP7419
C7441
TP7822
P2 LD2
CL7410
1
R7882
D7416D 7 4 1 6
TP7811
C7821
D7415
R7511 7 TP7823 R7847
CL7837 R7882
C7425
TP7830
C7425 2
TP7427
TP7423
C7815 JS7801
L7803
R7884
R7881
TP7411
ZA7103
TP7821
R7881
ZA7103
Q7405
7
1 JS7803
L7805
C7829
TP7821
J119
6
C7815
TP7501
TP7423
13 TP7830 R7884
CL7833
C7513
C7829
CL7874 R7886
L7804
TP7411
J206 L7804
JS7802
JA2
R7885 R7888 R 7 8 8 8
R7510
C7817
TP7501
L7813
L7813
R7885
PA7403
JS7404 R7510 CL7875CL7848 CL7880
C7817
PA7403 R7887 R7887
CL7413
CL7809
C7440 C7438
R7883
ZA7104
C7816
Q7403
CL7879
CL7876
Q7810
ZA7107
C7438
Q7403 D7409 A C7816 R7868
L7802
D7413 Q7810
D
D7800
R7857
JS7401
S R7857
JA54
C7834 CL7846
D7814
JS7800
R7842
JA51
CL7830
10
L7802
D7814
1
C7834
R7868
D7413
R7842
R7837
ZA7104
D7806
D7409 K
D7800
R7837
C7835
J256
TP7404
Q7801
TP7415
JA52 D7404
R7839
JA52
JS7401
TP7404
C7835
TP7405
R7839
D7806
R7834
D7408-HEAT0
G
C7440 A Q7801
TP7405
TP7415 C7814
J102 R7834
PA7406
TP7406
R7841
J5000
CL7831 R7841
PA7406
JS7805
CL7851
R7835
L7809
R7424
C7814
D7404
R7424
JS7805
L7809
T P 7 4CL7409
C7423 R7835
J313
Q7804
TP7406 D7408 C7812 J302
JS7411
TP7420 A
TP7416
R7555
J257 C7812
TP7416
C7560 C7565
R7846
6
20
JS7410
C7560C7565R7555
D7807
CL7560
J163
R7844
D S
R7554 C7563
CL7563
D7813
D7807
C7555
D7414
D7408 K
D7813
J5 C7563
C7423
C7555 Q7804
R7844
C7554
CL7802
CL7803
R7554
D7802
R7845
R7848
R7846
D7408-HEAT0
G D7802
C7554 R7557 C7556 C7556
CL7561
C7568
IC7503
L7814
J252
R7848
IC7503
D7550
CL7808 C 7 5 5 1 C 7 5 5 2
C7567 CL7821
8
J108
1
C7552
R7845
L7814
IC7504
R7551
IC7504
J162
R7551 C7551
J158
D7552
CL069
L7811
L7550
CL7807
D7551
R 7 5 5 8 CL7562
CL7852 JS7807
L7811
R7821
JS7806
R7821
CL7829
L7810
L7810
CL7858
1
D7551 10
J64
R7843
C7428
L7550
R7843
C7808
SW2855
R7836
R7558
C7562 J155
SW2855
C7566
J152 CL7801
D7552
C7566
T7301
ZA7109
C7808 R7822
J101
C7562
R7836
COLD
CL070
J105
J154 R7822
CL7411
J8
L7401
R7559
L7401
C7428
7
R7559
C7830
C7830
CL7828 CL2853
C7813
TP7800
A
7
TP7800
C7840 CL7822 JS7808
L7812
TP7424
JS7808
SW2854
SW2854
C7840
J160
D7402
L7812
J161
D7812
J151
6
K D7402 R7828
J65
C7813
R7828
TP7424
6
CL7819
D7304 R7811D7812
Q7805
R7827
CL7826 R7811
R7419 R7419 L7808
L7801
D7808
D 7 8 0CL7824
3 CL7869
D7401-HEAT0
D7304 R7827
L7801
A
L7808
J104
R7820
R2855
R7418 R7418
SW2853
L7403
R2855
SW2853
D7803
R7898 R 7 8 9 8
R7830CL7883R7820
CL7804 R7802 T P 7 4 1 2
R7312
R7312
J54
R7417 R 7 4 1 7
TP7412
L7403
CL2852
J202 R7830
D7808
R7325
R7832
CL7827
D7801
J110
R7416 CL7864 D7801
R7889
C7439
J59
R7416
C7310
R7832
CL7313 C7439
C7310
T7302
CL7887
T7301
R7889
R7326
JS7403
J156
A
C7519
R7325
D7810
CL7857
R2854
C7832
R7802
TP7301
C7838
C7832
R2854
CL7806
R7813
R7872
C7838
C7519
R7897
R7872
D7805D 7 8 0 5
TP7301 CL7890 R7813
CL2851
R7897 R7825 R7825
C7828
R7314 R7812
K D7401 R 7 8 9 9 R7899 D7810
JS7307
SW2852
R7831 R7826
SW2852
D7401
CL7850
R2853
TP7407
C7828
R2853
D7314
J66
CL7812
C7839
CL7811
D7314 R7824 R7829 R7829
R7831
C7806
T7302
TP7407
J57
Q 7 8 0 0 CL7891
C7811 C 7 8 1 1
C7839
R7824
C7806
A C7809 C 7 8 2 7
J58
J52
J159 C7802 1
R7859
Q7803
C7809 24
JS7307 R7808 C7827
J14
TP7409 CL2855
JS7305
Q7803
C7802
R7859
CL7805
C7837 R7501
J112
R7501
R7808
R2852
TP7409
R2852
SW2851
JA6
SW2851
D7343
D7343
1
R7823
R7804 CL7889
CL7854
C7422
R7806
CL7832
CL7814
CL7330
J55
CL7813
1
R7806
JS7305
C7810
Q7314 TP7408 D7804
CL2856
14
C7435 J251
Q7314
IC7800 C7810
C7837
JS7400 D7804
VJ2851
R7420
TP7402
C7801
CL7815
TP7402
CL7817C7807
TP7829
CL7820
R7896
R7395D7335
C2851 C 2 8 5 1
IC7800
D2851 D 2 8 5 1
D7406 JA8
J61 R7805 C7801
D7335
R7895
TP7829
C7422
R7895
JA8
D7811
R7421
CL7816
C 7 8 0 7 R7864
R7896
Q7402
R7395 R7805
TP7516
L7304
TP7403
14
R7320
CL7855
TP7802
R7814
CL7415
Q7402 C7803 R 7 8 6 4
R7814
JA12
TP7802
C7319
CL7818
R7220
D7811
R7854
R7384 JS7306
L7304 TP7403 JA12
VJ2851
C7442
CL7870R7854 R7851
CL7312
J115
PC7303
R7807
C7804
JS7402
PA7407
C7825
R7383
R7862
PA7407
JA10
R 7 8 5CL7868
CL7417
C7433 C 7 4 3 3
R7865
R7807 1
R7810
TP7516C 7 4 3 0 JA10
R7816
C7805
R7871
R7220 R7867
R7862
C7805
R7866
CL7310
R7871
R7816
R7420
Q7202
C7319
R7430
R7852
R7803
SW2857
R7305
R7803
CL7862JA9
C2852
R7870
C7430
R7305
C2852
D7406 C7824 R7809
J117
R7219 R7855
PC7303 C7317 TP7515 R7411
R7409
Q7404
C7432
Q7802
J303
Q7802
R7421 Q7202
R7409
C7304
J203
C7304
R7428 R7423
J201
JA53
C7321
Q7417
R7382
CL064
J106 TP7515
R7423 D2852
CL062
CL7307J109
R7382 J9 CL7888
SW2857
D2852
CL7318
R 7 4 5 4R7454 CL7223
J120
R7455
CL7303
R7319
Q7417 D7305
D7301
PC7302
CL7207
R7319 R7318
D7303
D7305
R 7 4 5 2 R7452
D7405
PC7302
C7203
C7208 R7205
JS7308
CL7301 Q7303
R7396
R 7 4 5 3R7453R7455
CL7321
R7318Q7303 C7208R7205
JS7205
R7211
R7212
R7209
CL063
R7230 C7201
JS7205
CL7317
R7304
R7209
D7301
CL7510
CL7305
CL7218
C7314 C7206
D7221
C7204
CL7414
1
6
R7405 C7307
D7411 Q7401 J3 R7212CL7211
IC7201 8
R739
J103 C7314
CL7215
C7211
C7213
C7222
C7213
CL7210
R 7CL7407
CL7222
R7228
CL7217
CL7216
C7305 R7229
C7434R7404IC7401 R7316 R 7 2 2 6 R7226
D7210
J316 C7202
TP7202
R7315R 7 3 1 5
CL7402
CL7228
IC7301 8
C7420C 7 4 1 9 I C 7 4 0 1 R7239
J113
C7311
J310 R7225 R 7 2 2 5 R7234R7232
C7214
CL7220
CL7221
CL7327
IC7301
R7224 L7208
C7322
R7402
R7402
TP7201
R7406C7419 CL7308
CL7214
CL7302R 7 3 0 3
C7312 D7311 D7308 J1 J255 D7210 R7239
C7322
TP7201
CL7324
JS7201
CL7231
C7418
L7207
D7309
J114CL7403
JS7201
L7202
CL7229
CL7230
R7407C7418 C7312
D7310
R7204 L7207
D7308
D7311
C7220
L7202
CL7202
37
C7220
CL7328
R7321
C7306
D7310
R72
R7204
CL7325
D7216
C7306
C7309 R7323
1
C7318
R7242
J314
R7426
CL7311
CL7319
J2 R7302R7321 R7238R7245
16
C7215
C7221
CL7326
C7221
CL7322 J308 R 7 2 4 5
C7215
R7322
CL7323
D7211
J118
R7401
C7303
R 7J312
R7207
TP7204
R7408
C7309
234
R7413R7415 C7318
JS7301
C7210
L7302
D7217 D7216
D
R7415
G
G
D7302
C7421
D7302
CL7406
J306
D7217
TP7203
R7324
R7311
Q7302
Q7301
C7421
JS7304
JS7202
L7201
TP7203
L7303
JS7304
L7303
R7324
D
R7407 R7241
CL7227
R7240
R7311
C7436 JS7202
JS7301
L7302
R7403
Q7203
QQ7201
C7316
C7434 C7 Q7301
S
Q7203
7201
D
Q7302
J305
C7420 10
C7316
L7210
3
L7210
R7406 C7315
C7315 J253
C7205
J254
R7202
C7106
HOT
R7202
R7308 R7104
S7106
D7104 R7232
R7210
R7243
D7212
D7104
L7209
CL7316
R7208
D7212
C7209
CL068
R7208
R7307
JS7303 C7209-A
C7209
R7201
R7201
D7105
JS7303
TP7108
P
R7105
C7216 JS7203
ZA7106 1 JS7203
L7203 3 L7203
C7216
TP7107
L7103 JS7101
TP7103
D7103
TP7104
1
LF7104
LIVE CIRCUIT
JS7103
L7103 L7101
JS7101 T7201
TP7104
S7107
LF7103
TP7103
T7202
LF7105
LF7104-A
D7107
LF7104
LF7105 1
D7107 5
LF7103-A
LF7103
D7101
-
J307
-
F7101
TNP4G598
S7108
T7201
TP7105
L7102
JS7102 T7202
01
J301
F71
R7102
L7102
D7102-HEAT0
JS7102
C7
C170 TP7105
140 D7106
TP7101
4A
-
T5AH 250V
8 4
03 D7102
JK7102
R7101
C7104
S0 TP7101
CF7103
R 7 1 CL7102
CL7101
L7104
CF7102
TP7100 03
TP7106
JS7104
L7104 C7105 10 6
R7101
JS7104
J311
D7102
1 2
D7106
CF7103
+
CF7102
CF7101
CF7101
+
TP7102
C7101
TP7102
S004 S7101
C7102
JS7105
L7105
J311
C7101
JS7105
L7105
ZA7105 JK7101
C7102
ZA7108
ZA7101
JK7101
ZA7101
C7107
ZA7105
C7107
85
17.3 POWER BOARD & CONTROL PANEL LAYOUT
ONLY
TC-40DX650C (TZRNP11SNUL).
TC-49DX650C (TZRNP11SMUL
REAR VIEW
TP7417
TP7418
P2
TP7820
TP7413
ZA7102
ZA7102
TP7413 JA1
TP7822
R7883 TP7810 T P 7 8 1 0
C7820 C 7 8 2 0
C7426
CL7800
TP7811
TP7419
TP7823
TP7801
JA1 LD1 TP7801
D7809 D 7 8 0 9
C7821
T P 7 4TP7414
14
TP7820
TP74181 4 C7833
TP7417 C7426
TP7410
LD2
C7823 C 7 8 2 3
TP7410
C7822C 7 8 2 2
TP7419
C7441
TP7822
P2 LD2
CL7410
1
R7882
D7416D 7 4 1 6
TP7811
C7821
D7415
R7511 7 TP7823 R7847
CL7837 R7882
C7425
TP7830
C7425 2
TP7427
TP7423
C7815 JS7801
L7803
R7884
R7881
TP7411
ZA7103
TP7821
R7881
ZA7103
Q7405
7
1 JS7803
L7805
C7829
TP7821
J119
6
C7815
TP7501
TP7423
13 TP7830 R7884
CL7833
C7513
C7829
CL7874 R7886
L7804
TP7411
J206 L7804
JS7802
JA2
R7885 R7888 R 7 8 8 8
R7510
C7817
TP7501
L7813
L7813
R7885
PA7403
JS7404 R7510 CL7875CL7848 CL7880
C7817
PA7403 R7887 R7887
CL7413
CL7809
C7440 C7438
R7883
ZA7104
C7816
Q7403
CL7879
CL7876
Q7810
ZA7107
C7438
Q7403 D7409 A C7816 R7868
L7802
D7413 Q7810
D
D7800
R7857
JS7401
S R7857
JA54
C7834 CL7846
D7814
JS7800
R7842
JA51
CL7830
10
L7802
D7814
1
C7834
R7868
D7413
R7842
R7837
ZA7104
D7806
D7409 K
D7800
R7837
C7835
J256
TP7404
Q7801
TP7415
JA52 D7404
R7839
JA52
JS7401
TP7404
C7835
TP7405
R7839
D7806
R7834
D7408-HEAT0
G
C7440 A Q7801
TP7405
TP7415 C7814
J102 R7834
PA7406
TP7406
R7841
J5000
CL7831 R7841
PA7406
JS7805
CL7851
R7835
L7809
R7424
C7814
D7404
R7424
JS7805
L7809
T P 7 4CL7409
C7423 R7835
J313
Q7804
TP7406 D7408 C7812 J302
JS7411
TP7420 A
TP7416
R7555
J257 C7812
TP7416
C7560 C7565
R7846
6
20
JS7410
C7560C7565R7555
D7807
CL7560
J163
R7844
D S
R7554 C7563
CL7563
D7813
D7807
C7555
D7414
D7408 K
D7813
J5 C7563
C7423
C7555 Q7804
R7844
C7554
CL7802
CL7803
R7554
D7802
R7845
R7848
R7846
D7408-HEAT0
G D7802
C7554 R7557 C7556 C7556
CL7561
C7568
IC7503
L7814
J252
R7848
IC7503
D7550
CL7808 C 7 5 5 1 C 7 5 5 2
C7567 CL7821
8
J108
1
C7552
R7845
L7814
IC7504
R7551
IC7504
J162
R7551 C7551
J158
D7552
CL069
L7811
L7550
CL7807
D7551
R 7 5 5 8 CL7562
CL7852 JS7807
L7811
R7821
JS7806
R7821
CL7829
L7810
L7810
CL7858
1
D7551 10
J64
R7843
C7428
L7550
R7843
C7808
SW2855
R7836
R7558
C7562 J155
SW2855
C7566
J152 CL7801
D7552
C7566
T7301
ZA7109
C7808 R7822
J101
C7562
R7836
COLD
CL070
J105
J154 R7822
CL7411
J8
L7401
R7559
L7401
C7428
7
R7559
C7830
C7830
CL7828 CL2853
C7813
TP7800
A
7
TP7800
C7840 CL7822 JS7808
L7812
TP7424
JS7808
SW2854
SW2854
C7840
J160
D7402
L7812
J161
D7812
J151
6
K D7402 R7828
J65
C7813
R7828
TP7424
6
CL7819
D7304 R7811D7812
Q7805
R7827
CL7826 R7811
R7419 R7419 L7808
L7801
D7808
D 7 8 0CL7824
3 CL7869
D7401-HEAT0
D7304 R7827
L7801
A
L7808
J104
R7820
R2855
R7418 R7418
SW2853
L7403
R2855
SW2853
D7803
R7898 R 7 8 9 8
R7830CL7883R7820
CL7804 R7802 T P 7 4 1 2
R7312
R7312
J54
R7417 R 7 4 1 7
TP7412
L7403
CL2852
J202 R7830
D7808
R7325
R7832
CL7827
D7801
J110
R7416 CL7864 D7801
R7889
C7439
J59
R7416
C7310
R7832
CL7313 C7439
C7310
T7302
CL7887
T7301
R7889
R7326
JS7403
J156
A
C7519
R7325
D7810
CL7857
R2854
C7832
R7802
TP7301
C7838
C7832
R2854
CL7806
R7813
R7872
C7838
C7519
R7897
R7872
D7805D 7 8 0 5
TP7301 CL7890 R7813
CL2851
R7897 R7825 R7825
C7828
R7314 R7812
K D7401 R 7 8 9 9 R7899 D7810
JS7307
SW2852
R7831 R7826
SW2852
D7401
CL7850
R2853
TP7407
C7828
R2853
D7314
J66
CL7812
C7839
CL7811
D7314 R7824 R7829 R7829
R7831
C7806
T7302
TP7407
J57
Q 7 8 0 0 CL7891
C7811 C 7 8 1 1
C7839
R7824
C7806
A C7809 C 7 8 2 7
J58
J52
J159 C7802 1
R7859
Q7803
C7809 24
JS7307 R7808 C7827
J14
TP7409 CL2855
JS7305
Q7803
C7802
R7859
CL7805
C7837 R7501
J112
R7501
R7808
R2852
TP7409
R2852
SW2851
JA6
SW2851
D7343
D7343
1
R7823
R7804 CL7889
CL7854
C7422
R7806
CL7832
CL7814
CL7330
J55
CL7813
1
R7806
JS7305
C7810
Q7314 TP7408 D7804
CL2856
14
C7435 J251
Q7314
IC7800 C7810
C7837
JS7400 D7804
VJ2851
R7420
TP7402
C7801
CL7815
TP7402
CL7817C7807
TP7829
CL7820
R7896
R7395D7335
C2851 C 2 8 5 1
IC7800
D2851 D 2 8 5 1
D7406 JA8
J61 R7805 C7801
D7335
R7895
TP7829
C7422
R7895
JA8
D7811
R7421
CL7816
C 7 8 0 7 R7864
R7896
Q7402
R7395 R7805
TP7516
L7304
TP7403
14
R7320
CL7855
TP7802
R7814
CL7415
Q7402 C7803 R 7 8 6 4
R7814
JA12
TP7802
C7319
CL7818
R7220
D7811
R7854
R7384 JS7306
L7304 TP7403 JA12
VJ2851
C7442
CL7870R7854 R7851
CL7312
J115
PC7303
R7807
C7804
JS7402
PA7407
C7825
R7383
R7862
PA7407
JA10
R 7 8 5CL7868
CL7417
C7433 C 7 4 3 3
R7865
R7807 1
R7810
TP7516C 7 4 3 0 JA10
R7816
C7805
R7871
R7220 R7867
R7862
C7805
R7866
CL7310
R7871
R7816
R7420
Q7202
C7319
R7430
R7852
R7803
SW2857
R7305
R7803
CL7862JA9
C2852
R7870
C7430
R7305
C2852
D7406 C7824 R7809
J117
R7219 R7855
PC7303 C7317 TP7515 R7411
R7409
Q7404
C7432
Q7802
J303
Q7802
R7421 Q7202
R7409
C7304
J203
C7304
R7428 R7423
J201
JA53
C7321
Q7417
R7382
CL064
J106 TP7515
R7423 D2852
CL062
CL7307J109
R7382 J9 CL7888
SW2857
D2852
CL7318
R 7 4 5 4R7454 CL7223
J120
R7455
CL7303
R7319
Q7417 D7305
D7301
PC7302
CL7207
R7319 R7318
D7303
D7305
R 7 4 5 2 R7452
D7405
PC7302
C7203
C7208 R7205
JS7308
CL7301 Q7303
R7396
R 7 4 5 3R7453R7455
CL7321
R7318Q7303 C7208R7205
JS7205
R7211
R7212
R7209
CL063
R7230 C7201
JS7205
CL7317
R7304
R7209
D7301
CL7510
CL7305
CL7218
C7314 C7206
D7221
C7204
CL7414
1
6
R7405 C7307
D7411 Q7401 J3 R7212CL7211
IC7201 8
R739
J103 C7314
CL7215
C7211
C7213
C7222
C7213
CL7210
R 7CL7407
CL7222
R7228
CL7217
CL7216
C7305 R7229
C7434R7404IC7401 R7316 R 7 2 2 6 R7226
D7210
J316 C7202
TP7202
R7315R 7 3 1 5
CL7402
CL7228
IC7301 8
C7420C 7 4 1 9 I C 7 4 0 1 R7239
J113
C7311
J310 R7225 R 7 2 2 5 R7234R7232
C7214
CL7220
CL7221
CL7327
IC7301
R7224 L7208
C7322
R7402
R7402
TP7201
R7406C7419 CL7308
CL7214
CL7302R 7 3 0 3
C7312 D7311 D7308 J1 J255 D7210 R7239
C7322
TP7201
CL7324
JS7201
CL7231
C7418
L7207
D7309
J114CL7403
JS7201
L7202
CL7229
CL7230
R7407C7418 C7312
D7310
R7204 L7207
D7308
D7311
C7220
L7202
CL7202
37
C7220
CL7328
R7321
C7306
D7310
R72
R7204
CL7325
D7216
C7306
C7309 R7323
1
C7318
R7242
J314
R7426
CL7311
CL7319
J2 R7302R7321 R7238R7245
16
C7215
C7221
CL7326
C7221
CL7322 J308 R 7 2 4 5
C7215
R7322
CL7323
D7211
J118
R7401
C7303
R 7J312
R7207
TP7204
R7408
C7309
234
R7413R7415 C7318
JS7301
C7210
L7302
D7217 D7216
D
R7415
G
G
D7302
C7421
D7302
CL7406
J306
D7217
TP7203
R7324
R7311
Q7302
Q7301
C7421
JS7304
JS7202
L7201
TP7203
L7303
JS7304
L7303
R7324
D
R7407 R7241
CL7227
R7240
R7311
C7436 JS7202
JS7301
L7302
R7403
Q7203
QQ7201
C7316
C7434 C7 Q7301
S
Q7203
7201
D
Q7302
J305
C7420 10
C7316
L7210
3
L7210
R7406 C7315
C7315 J253
C7205
J254
R7202
C7106
HOT
R7202
R7308 R7104
S7106
D7104 R7232
R7210
R7243
D7212
D7104
L7209
CL7316
R7208
D7212
C7209
CL068
R7208
R7307
JS7303 C7209-A
C7209
R7201
R7201
D7105
JS7303
TP7108
P
R7105
C7216 JS7203
ZA7106 1 JS7203
L7203 3 L7203
C7216
TP7107
L7103 JS7101
TP7103
D7103
TP7104
1
LF7104
LIVE CIRCUIT
JS7103
L7103 L7101
JS7101 T7201
TP7104
S7107
LF7103
TP7103
T7202
LF7105
LF7104-A
D7107
LF7104
LF7105 1
D7107 5
LF7103-A
LF7103
D7101
-
J307
-
F7101
TNP4G598
S7108
T7201
TP7105
L7102
JS7102 T7202
01
J301
F71
R7102
L7102
D7102-HEAT0
JS7102
C7
C170 TP7105
140 D7106
TP7101
4A
-
T5AH 250V
8 4
03 D7102
JK7102
R7101
C7104
S0 TP7101
CF7103
R 7 1 CL7102
CL7101
L7104
CF7102
TP7100 03
TP7106
JS7104
L7104 C7105 10 6
R7101
JS7104
J311
D7102
1 2
D7106
CF7103
+
CF7102
CF7101
CF7101
+
TP7102
C7101
TP7102
S004 S7101
C7102
JS7105
L7105
J311
C7101
JS7105
L7105
ZA7105 JK7101
C7102
ZA7108
ZA7101
JK7101
ZA7101
C7107
ZA7105
C7107
86
17.4 POWERBOARD LAYOUT
FRONT VIEW
87
17.6 PCB K (REMOTE SENSOR BOARD)
R2807
R2808
R2800
K10 R2809
R2804 R2806
R2803 R2805
C2807
R2801 R2816
JA1
TD2805
R2802 C2800 TD2807
TD2801 C2804 C2806 C2803 TD2806
C2802
C2801
R2820
D2800
R2823
TD2804
TD2803 R2821
C2805
SN2800
RM2800
D2802
D2802A
88
17.7 PCB LED DRIVE
FRONT VIEW
REAR VIEW
89
15.0 Diagrams
Chassis diagram DX650C
Remarks:
Resistance:
All resistors are carbon 1 / 4W, unless otherwise mark:
2. Capacitor:
All capacitors are ceramic 50V, unless you check the following:
The unit is µF, unless otherwise note: Bipolar
Temperature Compensation Electrolytic
M Polyester T Dipped Tantalum
m Metallic polyester Z Zener diode type
Polysaccharide
3. Coil
The unit is µH inductor, unless stated otherwise
4. Test point
: Test point position
5. Ground Symbol
: Cold ground Hot ground
6. Voltage Measurement
The voltage is measured by a voltmeter DC The measurement conditions are as follows:
Power Supply ....................................... See page 10 for each model reference .
Received Signal ................................................ ...... Color Bar Signal
All User Controls ........................... Position Maximum
7. Number in the red circle indicates the number in the waveform
(See the pattern in Table) 8. When the arrow pointing is found ( ), the connection is easily found in the direction of the
arrow. 9. Indicates the increased flow indicated: Video: Audio
10. This schematic diagram is the last in the time of printing and are subject to change without notice.
Comments:
1. The power circuit contains a circuit area (Hot Earth) using a separate power supply to isolate
groundint cold connection.
90
Precautions:
a) Do not touch the part or parts of warm earth with the cold ground at the same time as you may suffer
damage.
b) Do not connect simultaneously an instrument to hot or cold circuits, such as an oscilloscope. Con-
nect the instrument ground to the correct earth connection.
d) Important note:
Use the accompanying schematic circuit for reference only and reference to the part number always
use the parts list.
91
R