Marine

Auxiliary 3304B
Engine
56 bkW (75 bhp) 100 mhp @ 1200 rpm

SPECIFICATIONS
I-4, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Displacement . . . . . . . . . . . . . . . . . . . . . 7.0 L (425 cu. in.)
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 mm (4.75 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mm (6.0 in.)
Aspiration . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
Governor . . . . . . . . . . . . . . . . . Hydra-mechanical or PSG
Engine Weight, Net Dry (approx)
Heat Exchanger Cooled . . . . . . . . . . . 798 kg (1760 lb)
Capacity for Liquids
Cooling System (engine only) . . . . 13 L (3.5 U.S. gal)
Lube Oil System . . . . . . . . . . . . . . 22.5 L (5.9 U.S. gal)
Shown with
Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . 250 hr
Accessory Equipment Caterpillar DEO 10W30 or 15W40
Rotation (from flywheel end) . . . . . . . Counterclockwise

STANDARD EQUIPMENT ACCESSORY EQUIPMENT

Air Inlet System Air Starting Motor
Regular duty single-stage air cleaner, rain cap Alarm Contactor — Oil Pressure, Water Temperature
12V 51 Amp, 24V 35 Amp or 60 Amp Alternator
Charging System Auxiliary Drive Pulley
24V 35 Amp alternator Digital Tachometer
Double Wall Fuel Lines and Drain
Cooling System 12V Electric Gauges — Oil Pressure, Water Temperature
Gear driven, self-priming, centrifugal auxiliary water 24V or 32V Electric Gauges – Oil Pressure,
pump with rubber impeller (heat exchanger engines); Water Temperature
gear driven, centrifugal, jacket water pump; expansion Electric Shutoffs — Oil Pressure, Water Temperature,
tank; oil cooler; engine mounted heat exchanger with Overspeed
removable tube bundle and replaceable copper-nickel 12V Electric Starting Motor
tubes (heat exchanger engines); expansion tank; Ether Starting Aid
thermostat and housing Exhaust Elbow, Pipe, Flexible Fittings
Generator Installation Arrangement
Exhaust System Hydraulic Pump Drive and Adapter
Watercooled manifold and turbocharger; dry flange, Magnetic Pickup
76 mm (3 in.) Manual Shutoff Lever
Manual Voltage Control
Flywheel and Flywheel Housing Mechanical Tachometer Drive
SAE No. 1 (156 teeth) Mechanical Overspeed Contactor
Paralleling Kit
Fuel System Rear Enclosed Clutch and Support
Fuel priming pump, fuel transfer pump, fuel filter, RFI Filter
primary fuel filter, flexible fuel lines RH Oil Level Gauge
Instruments Solenoid Shutoff — 12V or 24V, ETR or ETS
Spare Parts Kit
RH instrument panel with oil pressure, water
temperature, and fuel pressure gauges; service meter
Lube System
Top-mounted crankcase breather, oil filter, LH oil level PERFORMANCE DATA
gauge
Mounting System Naturally Aspirated
Supports TM1555-00
Starting System 56 bkW (.8 pf) 75 bhp
24V Electric starting motor % load bkW Lph gph
General 100 58 18.8 5.0
Caterpillar yellow paint, lifting eyes 75 44 12.4 3.3
50 31 8.9 2.4
25 17 5.6 1.5
 3304B MARINE AUXILIARY ENGINE — 56 bkW (75 bhp)
Right Side Front

03

02
H

01 01 01

L W

02
03

DIMENSIONS*
mm in.
Overall Length 1373.4 54.1
Length from front to rear face of block 986.6 38.8
Length from rear face of block to end of engine 386.8 15.2
Overall Height 1145.2 45.1
Height from crankshaft centerline to top of engine 827.7 32.6
Height from crankshaft centerline to bottom of oil pan 317.5 12.5
Overall Width 957.5 37.7
Width from crankshaft centerline to port side (left side) 434.8 17.1
Width from crankshaft centerline to starboard side 522.7 20.6
(right side)
Front Rear
mm in. mm in.
Customer mounting hole diameter 17.5 0.7 17.0 0.7
Width from crankshaft centerline to side 285.1 11.3 285.8 11.3
Length from rear face of block to mounting hole 653.4 25.7 76.2 3.0
711.4 28.0 125.7 5.0
*Illustrations and dimensions from drawing: 118-7825.

RATING CONDITIONS
Engine Performance Parameters Fuel rates are based on fuel oil of 35° API
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3% [16°C (60°F)] gravity having an LHV of
Specific Fuel Consumption . . . . . . . . . . . . . . . +3% 42 780 kJ/kg (18,390 Btu/lb) when used at 29°C
Fuel Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5% (85°F) and weighing 838.9 g/L (7.001 lb/U.S. gal).
Ratings are based on SAE J1228/ISO8665 Additional ratings may be available for specific
standard conditions of 100 kPa (29.61 in. Hg), customer requirements. Consult your Caterpillar
25°C (77°F), and 30% relative humidity. These representative for additional information.
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27°C (81°F), and 60% relative humidity.

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillar’s control.
TMI Reference No.: TM1555-00 (6-15-01)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM1540-00 (6-01) Printed in U.S.A. ©2001 Caterpillar
All rights reserved.
 Marine
Auxiliary 3304B
Engine Radiator Cooled
57 bkW (76 bhp) 77 mhp @ 1500 rpm

SPECIFICATIONS
I-4, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Displacement . . . . . . . . . . . . . . . . . . . . . 7.0 L (425 cu. in.)
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 mm (4.75 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mm (6.0 in.)
Aspiration . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
Governor . . . . . . . . . . . . . . . . . Hydra-mechanical or PSG
Engine Weight, Net Dry (approx). . . . . 835 kg (1840 lb)
Capacity for Liquids
Cooling System
(engine and radiator) . . . . . . . . . . 32 L (8.5 U.S. gal)
Lube Oil System . . . . . . . . . . . . . . . 22 L (5.75 U.S. gal)
Shown with Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . 500 hr
Accessory Equipment Caterpillar DEO 10W30 or 15W40
Rotation (from flywheel end) . . . . . . . Counterclockwise
STANDARD EQUIPMENT ACCESSORY EQUIPMENT
Air Inlet System Air Starting Motor
Regular duty single stage air cleaner, rain cap Alarm Contactor — Oil Pressure, Water Temperature
12V 60 Amp Alternator
Charging System
Auxiliary Drive Pulley
24V 35 Amp alternator
Digital Tachometer
Cooling System Double Wall Fuel Lines and Drain
Gear driven, centrifugal, jacket water pump; oil cooler; 12V Electric Gauges — Oil Pressure, Water Temperature
engine mounted radiator, fan guard, blower fan, fan 24V or 32V Electric Gauges — Oil Pressure, Water
drive; thermostat and housing Temperature
Exhaust System Electric Shutoffs — Oil Pressure, Water Temperature,
Overspeed
Watercooled manifold and turbocharger; dry flange,
76 mm (3 in.) 12V Electric Starting Motor
Ether Starting Aid
Flywheel & Flywheel Housing Exhaust Elbow, Pipe, Flexible Fittings
SAE No. 1 (156 teeth) Generator Installation Arrangement
Fuel System High Capacity Radiator and Fan Drive
Fuel priming pump, fuel transfer pump, fuel filter, Hydraulic Pump Drive
primary fuel filter, flexible fuel lines Magnetic Pickup
Manual Shutoff Lever
Instruments
Manual Voltage Control
RH instrument panel with oil pressure, water
Mechanical Tachometer Drive
temperature, and fuel pressure gauges; service meter
Paralleling Kit
Lube System Rear Enclosed Clutch and Support
Top-mounted crankcase breather, oil filter, LH oil level RFI Filter
gauge RH Oil Level Gauge
Mounting System Solenoid Shutoff — 12V or 24V, ETR or ETS
Supports Spare Parts Kit
Starting System
24V Electric starting motor PERFORMANCE DATA
General Naturally Aspirated
Caterpillar yellow paint, lifting eyes DM4053-00
57 bkW (.8 pf) 76 bhp
% load bkW Lph gph
100 60 17.4 4.6
76 45 12.9 3.4
52 31 9.4 2.5
23 15 5.8 1.5
 3304B MARINE AUXILIARY ENGINE — 57 bkW (76 bhp)
Right Side Front Footprint

02
03

03
H

01 01 01 02 02

L W

02
03

03
DIMENSIONS*
mm in.
Overall Length 1467.6 57.8
Length from front to rear face of block 1080.8 42.6
Overall Height 1120.9 44.1
Height from crankshaft centerline to top of engine 803.5 31.6
Height from crankshaft centerline to bottom of oil pan 317.4 12.5
Overall Width 979.4 38.6
Width from crankshaft centerline to port side (left side) 436.8 17.2
Width from crankshaft centerline to starboard side 542.8 21.4
(right side)
Front Rear
mm in. mm in.
Customer mounting hole diameter 17.5 0.7
Width from crankshaft centerline to side 285.7 11.3 285.7 11.3
Length from rear face of block to mounting holes 653.4 25.7 125.8 2.0
713.4 28.1 125.8 5.0
*Illustrations and dimensions from drawing: 138-9318.

RATING CONDITIONS
Engine Performance Parameters Fuel rates are based on fuel oil of 35° API
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3% [16°C (60°F)] gravity having an LHV of
Specific Fuel Consumption . . . . . . . . . . . . . . . +3% 42 780 kJ/kg (18,390 Btu/lb) when used at 29°C
Fuel Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5% (85°F) and weighing 838.9 g/L (7.001 lb/U.S. gal).
Ratings are based on SAE J1228/ISO8665 Additional ratings may be available for specific
standard conditions of 100 kPa (29.61 in. Hg), customer requirements. Consult your Caterpillar
25°C (77°F), and 30% relative humidity. These representative for additional information.
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27°C (81°F), and 60% relative humidity.

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillar’s control.
TMI Reference No.: DM4053-00 (6-19-01)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM1589-00 (6-01) Printed in U.S.A. ©2001 Caterpillar
All rights reserved.
 Marine
Auxiliary 3304B
Engine
63 bkW (84 bhp) 85 mhp @ 1500 rpm

SPECIFICATIONS
I-4, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Displacement . . . . . . . . . . . . . . . . . . . . . 7.0 L (425 cu. in.)
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 mm (4.75 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mm (6.0 in.)
Aspiration . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
Governor . . . . . . . . . . . . . . . . . Hydra-mechanical or PSG
Engine Weight, Net Dry (approx)
Heat Exchanger Cooled . . . . . . . . . . . 798 kg (1760 lb)
Keel Cooled . . . . . . . . . . . . . . . . . . . . . . 764 kg (1685 lb)
Capacity for Liquids
Cooling System (engine only) . . . . 13 L (3.5 U.S. gal)
Shown with
Lube Oil System . . . . . . . . . . . . . . 22.5 L (5.9 U.S. gal)
Accessory Equipment Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . 250 hr
Caterpillar DEO 10W30 or 15W40
Rotation (from flywheel end) . . . . . . . Counterclockwise

STANDARD EQUIPMENT ACCESSORY EQUIPMENT

Air Inlet System Air Starting Motor
Regular duty single-stage air cleaner, rain cap Alarm Contactor — Oil Pressure, Water Temperature
12V 51 Amp, 24V 35 Amp or 60 Amp Alternator
Charging System Auxiliary Drive Pulley
24V 35 Amp alternator Digital Tachometer
Cooling System Double Wall Fuel Lines and Drain
12V Electric Gauges — Oil Pressure, Water Temperature
Gear driven, self-priming, centrifugal auxiliary water
24V or 32V Electric Gauges – Oil Pressure,
pump with rubber impeller (heat exchanger engines);
Water Temperature
gear driven, centrifugal, jacket water pump; expansion
Electric Shutoffs — Oil Pressure, Water Temperature,
tank; oil cooler; engine mounted heat exchanger with Overspeed
removable tube bundle and replaceable copper-nickel 12V Electric Starting Motor
tubes (heat exchanger engines); expansion tank;
Ether Starting Aid
thermostat and housing
Exhaust Elbow, Pipe, Flexible Fittings
Exhaust System Generator Installation Arrangement
Watercooled manifold and turbocharger; dry flange, Hydraulic Pump Drive and Adapter
76 mm (3 in.) Magnetic Pickup
Manual Shutoff Lever
Flywheel and Flywheel Housing
Manual Voltage Control
SAE No. 1 (156 teeth) Mechanical Tachometer Drive
Fuel System Mechanical Overspeed Contactor
Fuel priming pump, fuel transfer pump, fuel filter, Paralleling Kit
primary fuel filter, flexible fuel lines Rear Enclosed Clutch and Support
RFI Filter
Instruments RH Oil Level Gauge
RH instrument panel with oil pressure, water Solenoid Shutoff — 12V or 24V, ETR or ETS
temperature, and fuel pressure gauges; service meter Spare Parts Kit
Lube System
Top-mounted crankcase breather, oil filter, LH oil level PERFORMANCE DATA
gauge
Mounting System Naturally Aspirated
Supports TM1975-00
Starting System 63 bkW (.8 pf) 84 bhp
24V Electric starting motor % load bkW Lph gph
General 100 57 16.1 4.3
Caterpillar yellow paint, lifting eyes 70 40 11.4 3.0
50 29 8.8 2.3
20 12 5.2 1.4
 3304B MARINE AUXILIARY ENGINE — 63 bkW (84 bhp)
Right Side Front

03

02
H

01 01 01

L W

02
03

DIMENSIONS*
mm in.
Overall Length 1373.4 54.1
Length from front to rear face of block 986.6 38.8
Length from rear face of block to end of engine 386.8 15.2
Overall Height 1145.2 45.1
Height from crankshaft centerline to top of engine 827.7 32.6
Height from crankshaft centerline to bottom of oil pan 317.5 12.5
Overall Width 957.5 37.7
Width from crankshaft centerline to port side (left side) 434.8 17.1
Width from crankshaft centerline to starboard side 522.7 20.6
(right side)
Front Rear
mm in. mm in.
Customer mounting hole diameter 17.5 0.7 17.0 0.7
Width from crankshaft centerline to side 285.1 11.3 285.8 11.3
Length from rear face of block to mounting hole 653.4 25.7 76.2 3.0
711.4 28.0 125.7 5.0
*Illustrations and dimensions from drawing: 118-7825.

RATING CONDITIONS
Engine Performance Parameters Fuel rates are based on fuel oil of 35° API
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3% [16°C (60°F)] gravity having an LHV of
Specific Fuel Consumption . . . . . . . . . . . . . . . +3% 42 780 kJ/kg (18,390 Btu/lb) when used at 29°C
Fuel Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5% (85°F) and weighing 838.9 g/L (7.001 lb/U.S. gal).
Ratings are based on SAE J1228/ISO8665 Additional ratings may be available for specific
standard conditions of 100 kPa (29.61 in. Hg), customer requirements. Consult your Caterpillar
25°C (77°F), and 30% relative humidity. These representative for additional information.
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27°C (81°F), and 60% relative humidity.

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillar’s control.
TMI Reference No.: TM1975-00 (6-15-01)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM1537-00 (6-01) Printed in U.S.A. ©2001 Caterpillar
All rights reserved.
 Marine
Auxiliary 3304B
Engine Radiator Cooled
73 bkW (98 bhp) 99 mhp @ 1800 rpm

SPECIFICATIONS
I-4, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Displacement . . . . . . . . . . . . . . . . . . . . . 7.0 L (425 cu. in.)
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 mm (4.75 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mm (6.0 in.)
Aspiration . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
Governor . . . . . . . . . . . . . . . . . Hydra-mechanical or PSG
Engine Weight, Net Dry (approx). . . . . 835 kg (1840 lb)
Capacity for Liquids
Cooling System
(engine and radiator) . . . . . . . . . . 32 L (8.5 U.S. gal)
Lube Oil System . . . . . . . . . . . . . . . 22 L (5.75 U.S. gal)
Shown with Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . 500 hr
Accessory Equipment Caterpillar DEO 10W30 or 15W40
Rotation (from flywheel end) . . . . . . . Counterclockwise
STANDARD EQUIPMENT ACCESSORY EQUIPMENT
Air Inlet System Air Starting Motor
Regular duty single stage air cleaner, rain cap Alarm Contactor — Oil Pressure, Water Temperature
12V 60 Amp Alternator
Charging System
Auxiliary Drive Pulley
24V 35 Amp alternator
Digital Tachometer
Cooling System Double Wall Fuel Lines and Drain
Gear driven, centrifugal, jacket water pump; oil cooler; 12V Electric Gauges — Oil Pressure, Water Temperature
engine mounted radiator, fan guard, blower fan, fan 24V or 32V Electric Gauges — Oil Pressure, Water
drive; thermostat and housing Temperature
Exhaust System Electric Shutoffs — Oil Pressure, Water Temperature,
Overspeed
Watercooled manifold and turbocharger; dry flange,
76 mm (3 in.) 12V Electric Starting Motor
Ether Starting Aid
Flywheel & Flywheel Housing Exhaust Elbow, Pipe, Flexible Fittings
SAE No. 1 (156 teeth) Generator Installation Arrangement
Fuel System High Capacity Radiator and Fan Drive
Fuel priming pump, fuel transfer pump, fuel filter, Hydraulic Pump Drive
primary fuel filter, flexible fuel lines Magnetic Pickup
Manual Shutoff Lever
Instruments
Manual Voltage Control
RH instrument panel with oil pressure, water
Mechanical Tachometer Drive
temperature, and fuel pressure gauges; service meter
Paralleling Kit
Lube System Rear Enclosed Clutch and Support
Top-mounted crankcase breather, oil filter, LH oil level RFI Filter
gauge RH Oil Level Gauge
Mounting System Solenoid Shutoff — 12V or 24V, ETR or ETS
Supports Spare Parts Kit
Starting System
24V Electric starting motor PERFORMANCE DATA
General Naturally Aspirated
Caterpillar yellow paint, lifting eyes DM4054-00
73 bkW (.8 pf) 98 bhp
% load bkW Lph gph
100 78 24.9 6.6
76 59 17.2 4.5
53 41 12.5 3.3
24 20 7.6 2.0
 3304B MARINE AUXILIARY ENGINE — 73 bkW (98 bhp)
Right Side Front Footprint

02
03

03
H

01 01 01 02 02

L W

02
03

03
DIMENSIONS*
mm in.
Overall Length 1467.6 57.8
Length from front to rear face of block 1080.8 42.6
Overall Height 1120.9 44.1
Height from crankshaft centerline to top of engine 803.5 31.6
Height from crankshaft centerline to bottom of oil pan 317.4 12.5
Overall Width 979.4 38.6
Width from crankshaft centerline to port side (left side) 436.6 17.2
Width from crankshaft centerline to starboard side 542.8 21.4
(right side)
Front Rear
mm in. mm in.
Customer mounting hole diameter 17.5 0.7
Width from crankshaft centerline to side 285.7 11.3 285.7 11.3
Length from rear face of block to mounting holes 653.4 25.7 49.6 2.0
713.4 28.1 125.8 5.0
*Illustrations and dimensions from drawing: 138-9318.

RATING CONDITIONS
Engine Performance Parameters Fuel rates are based on fuel oil of 35° API
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3% [16°C (60°F)] gravity having an LHV of
Specific Fuel Consumption . . . . . . . . . . . . . . . +3% 42 780 kJ/kg (18,390 Btu/lb) when used at 29°C
Fuel Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5% (85°F) and weighing 838.9 g/L (7.001 lb/U.S. gal).
Ratings are based on SAE J1228/ISO8665 Additional ratings may be available for specific
standard conditions of 100 kPa (29.61 in. Hg), customer requirements. Consult your Caterpillar
25°C (77°F), and 30% relative humidity. These representative for additional information.
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27°C (81°F), and 60% relative humidity.

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillar’s control.
TMI Reference No.: DM4054-00 (6-18-01)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM1591-00 (6-01) Printed in U.S.A. ©2001 Caterpillar
All rights reserved.
 Marine
Auxiliary 3304B
Engine
74 bkW (99 bhp) 100 mhp @ 1800 rpm

SPECIFICATIONS
I-4, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Displacement . . . . . . . . . . . . . . . . . . . . . 7.0 L (425 cu. in.)
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 mm (4.75 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mm (6.0 in.)
Aspiration . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
Governor . . . . . . . . . . . . . . . . . Hydra-mechanical or PSG
Engine Weight, Net Dry (approx)
Heat Exchanger Cooled . . . . . . . . . . . 798 kg (1760 lb)
Keel Cooled . . . . . . . . . . . . . . . . . . . . . . 764 kg (1685 lb)
Capacity for Liquids
Cooling System (engine only) . . . . 13 L (3.5 U.S. gal)
Shown with
Lube Oil System . . . . . . . . . . . . . . 22.5 L (5.9 U.S. gal)
Accessory Equipment Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . 250 hr
Caterpillar DEO 10W30 or 15W40
Rotation (from flywheel end) . . . . . . . Counterclockwise

STANDARD EQUIPMENT ACCESSORY EQUIPMENT

Air Inlet System Air Starting Motor
Regular duty single-stage air cleaner, rain cap Alarm Contactor — Oil Pressure, Water Temperature
12V 51 Amp, 24V 35 Amp or 60 Amp Alternator
Charging System Auxiliary Drive Pulley
24V 35 Amp alternator Digital Tachometer
Double Wall Fuel Lines and Drain
Cooling System 12V Electric Gauges — Oil Pressure, Water Temperature
Gear driven, self-priming, centrifugal auxiliary water 24V or 32V Electric Gauges – Oil Pressure,
pump with rubber impeller (heat exchanger engines); Water Temperature
gear driven, centrifugal, jacket water pump; expansion Electric Shutoffs — Oil Pressure, Water Temperature,
tank; oil cooler; engine mounted heat exchanger with Overspeed
removable tube bundle and replaceable copper-nickel 12V Electric Starting Motor
tubes (heat exchanger engines); expansion tank; Ether Starting Aid
thermostat and housing Exhaust Elbow, Pipe, Flexible Fittings
Generator Installation Arrangement
Exhaust System Hydraulic Pump Drive and Adapter
Watercooled manifold and turbocharger; dry flange, Magnetic Pickup
76 mm (3 in.) Manual Shutoff Lever
Manual Voltage Control
Flywheel and Flywheel Housing Mechanical Tachometer Drive
SAE No. 1 (156 teeth) Mechanical Overspeed Contactor
Paralleling Kit
Fuel System Rear Enclosed Clutch and Support
Fuel priming pump, fuel transfer pump, fuel filter, RFI Filter
primary fuel filter, flexible fuel lines RH Oil Level Gauge
Instruments Solenoid Shutoff — 12V or 24V, ETR or ETS
Spare Parts Kit
RH instrument panel with oil pressure, water
temperature, and fuel pressure gauges; service meter
Lube System
Top-mounted crankcase breather, oil filter, LH oil level PERFORMANCE DATA
gauge
Mounting System Naturally Aspirated
Supports TM8324-00
Starting System 74 bkW (.8 pf) 99 bhp
24V Electric starting motor % load bkW Lph gph
General 100 74 22.7 6.0
Caterpillar yellow paint, lifting eyes 77 56 16.5 4.4
54 40 12.3 3.2
23 18 7.4 2.0
 3304B MARINE AUXILIARY ENGINE — 74 bkW (99 bhp)
Right Side Front

03

02
H

01 01 01

L W

02
03

DIMENSIONS*
mm in.
Overall Length 1373.4 54.1
Length from front to rear face of block 986.6 38.8
Length from rear face of block to end of engine 386.8 15.2
Overall Height 1145.2 45.1
Height from crankshaft centerline to top of engine 827.7 32.6
Height from crankshaft centerline to bottom of oil pan 317.5 12.5
Overall Width 957.5 37.7
Width from crankshaft centerline to port side (left side) 434.8 17.1
Width from crankshaft centerline to starboard side 522.7 20.6
(right side)
Front Rear
mm in. mm in.
Customer mounting hole diameter 17.5 0.7 17.0 0.7
Width from crankshaft centerline to side 285.1 11.3 285.8 11.3
Length from rear face of block to mounting hole 653.4 25.7 76.2 3.0
711.4 28.0 125.7 5.0
*Illustrations and dimensions from drawing: 118-7825.

RATING CONDITIONS
Engine Performance Parameters Fuel rates are based on fuel oil of 35° API
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3% [16°C (60°F)] gravity having an LHV of
Specific Fuel Consumption . . . . . . . . . . . . . . . +3% 42 780 kJ/kg (18,390 Btu/lb) when used at 29°C
Fuel Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5% (85°F) and weighing 838.9 g/L (7.001 lb/U.S. gal).
Ratings are based on SAE J1228/ISO8665 Additional ratings may be available for specific
standard conditions of 100 kPa (29.61 in. Hg), customer requirements. Consult your Caterpillar
25°C (77°F), and 30% relative humidity. These representative for additional information.
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27°C (81°F), and 60% relative humidity.

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillar’s control.
TMI Reference No.: TM8324-00 (6-15-01)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM1539-00 (6-01) Printed in U.S.A. ©2001 Caterpillar
All rights reserved.